help help... ESX host shows that only ANSWERS DO NOT

Similar Questions

• I can connect only partially. The sign continued to show and I can't activate the mobile link. On the Help menu, it shows that I am connected.

  I can connect only partially. The sign continued to show and I can't activate the mobile link. On the Help menu, it shows that I am connected. Adobe has support people or only computer guessed help?

  Download, installation, setting up for the Installation of Acrobat & day out>

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When I tried to upgrade windows 10, it showed that my windows are not activated.

  * Original title: upgrade windows 10

  When I tried to upgrade windows 10. It showed that my windows are not activated.

  Please help me with this.

  I want to upgrade to Windows 10.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• Why my "speaker" icon shows that the audio is not working?

  Why my "speaker" icon shows that the audio is not working?

  Hello

  Thanks for posting this question in the Microsoft Community. It seems that the audio does not work.

  Answering these questions that would help us provide a better solution:

  1. What is the full error message you get?

  2 have you tried to install the drivers for the sound card?

  3. What is the brand and model of the computer?

  Method 1:

  Try the methods mentioned in this link and check:

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Also check out this link as a reference are discussed common issues with sound:

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

  Method 2:

   

  Check if the Audio services and dependency are started. To do;

   

  a. Windows Audio

   

  b. Windows Audio Endpoint Builder

   

  And its dependencies are

   

  c. multimedia class Scheduler

   

  d. remote procedure call

   

  e. generator Windows Audio endpoint

   

  a. click Start, type services.msc in the search box.

  b. search for the services mentioned above and check if the services are started and the Startup type is set to Automatic.

  c. If not, right-click on the service and click Start.

   

   

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.

• I got a redemption of my school code in the United States, but I couldn't use it. It shows that this card does not correspond to my Adobe ID because of problem of country or region.

  I got a redemption of my school code in the United States, but I couldn't use it. It shows that this card does not correspond to my Adobe ID because of problem of country or region.

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

  If you have a US redemption code, your profile must also show you in the United States

• ESX host is listed in DVSwitch, but not in DVportgroups

  Hello

  I have the following in a CLuster (5.5 Vcenter, ESXi hosts 5.1) problem:

  I added a new ESX to the cluster (number 9 of ESX), then added 4 network cards to the DVSwitch (uses the LACP Protocol).

  In this DVSwitch I 2 DVportGroups / tag VLAN

  The problem is the host is listed in the tab "Hosts" in VCenter to level DVSwicth, but do not appear in the DVportgroups tabs (all hosts are listed here but not the last one..)

  vmk0 migrated successfully to the VLAN 1 St... but now, it appears limited to ""... I can migrate to the DVportGroup right... and VCenter says 'ok'... but nothing changes...

  I tried to migrate a virtual machine on the ESX (2nd VLAN) = > VM pings OK...

  So "technically" it works very well... but the ESX does NOT appear as members of DVportGroup.

  The problem appeared when I tried to deploy a vApp (antivirus) on the ESX... I'm stuck at the "select VLANS for the NETWORK card"... There is no VIRTUAL LAN in the list... (because the ESX host is no not part of any dvportgroup..)

  I tried "adding the ESX to the DVportGroup" after having asked for credentials, VCenter says 'ESX is already part of the pole '...

  Someone had this strange behavior?

  What can I do?

  Help!

  Best regards

  S

  I had a similar case, where the hosts have been posted under DVS, but not under DVS exchanges.

  A restart of vCenter Service fixed the problem. However, I was not deploy any TIME or such.

  Suhas

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• Help NNetworked HDD (showing that sharepoint)

  Hello

  I plugged a disk external DRIVE via USB my cable provider Modem/Router so I could access it on my Macbook.  When I get K command in the finder, it appears like a number and a sharepoint folder.  When I double click on the folder that nothing appears.  The drive is formatted Mac OS journaled and works fine when plugged directly into the Macbook so I know it works.  I know that's not good to go but any help would be greatly appreciated.

  I'm under El Capitan 10.11.5

  Thank you

  Doug

  A third-party router is unable to read a disc in Mac OS format. You must follow the manufacturer's instructions to reformat the hard drive on the router. This will delete all data on the disk.

  If you have two Macs, you can of course share the drive from one to the other without reformatting.

• When I click on Firefox Help/About it shows that I'm up-to-date, using FF 6.0.2 - but when I try to access Google more, she says I'm using FF 3.6?

  Sometimes when playing some games on Facebook, when I try to join Google more, and when I try to add plug-ins for FF.

  The info on the right margin is when you started the issue and static information. To see the current user Agent string, the easiest thing is to use

  • Firefox-> help-> troubleshooting information
  • See also
    • Use the troubleshooting information page to help solve the problems of Firefox
    • http://KB.mozillazine.org/Troubleshooting_Information_report

  Or do a search on the web for sites that display your User Agent string

  I suspect that research of fastbrowser, although she may have a Web site also includes installation of software on your computer, be sure to ask the ISP about it. I have now found http://www.fastbrowsersearch.com/ which could be search site, you use and apparently includes an option and help the information.

  It seems I may have been incorrect in implying that the problem is caused by a malicious software.
  Who is your ISP?

  Note that also Firefox itself can provide a security limited but useful in research and use of the web see

  • http://www.Mozilla.org/en-us/Firefox/phishing-protection/
    What explains this and how the protection using the
    • http://www.Mozilla.org/en-us/Firefox/phishing-protection/
    • Although now, you are likely to access the firefox button option see passwords and security settings

• 8 GB of RAM shows that only 2.85 GB usable

  Dear team

  My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

  Monday, June 25, 2012 16:09:46 + 0000, JOBYTJOHN wrote:

  My 32-bit Windows 7 system shows only 2.85 GB usable out of 8 GB of RAM in the system properties. Is there a problem with my PC. Help, please.

  No, there is no problem, other than your lost money by buying
  more than 4 GB.

  All versions of Windows 32-bit client (XP/Vista/7 not only) have a 4GB
  address space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.
  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM. It's
  because some of the space is used by the hardware and is not available for
  operating system and applications. The amount you can use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  GB 3.1. you are a little below this average.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.
  Ken Blake, Microsoft MVP

• Help of blackBerry Smartphones that my curve will not work after I installed an update

  I recently installed an update for my curve. Since then it keeps loading then a white screen saying "error, press any key to return to the configuration of pre" then it turn off then repeats the process again. " I need help because phone is important to my work. Thanks for any help.

  I tried keeping on the battery for 5 minutes.

  Hi scrack

  So if it's during a software device, you can try a fresh reload of your device software to exclude any corrupt device OS. Have a look at how to perform a clean reload of the smart phone BlackBerry using BlackBerry desktop software.

  KB11320

  All you need a PC with Internet connection and USB cable.

  Try it and tell us.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Remote ESXi hosts show that "not responding".

  I'm under VC 2.5 with the local ESX 3.5 U4 hosts.  I recently added three ESXi 3.5 hosts in a cluster.  They add very well, but turns to ' does not ' after a few minutes.  I can disconnect and reconnect, but the same thing.  I am told that the WAN uplinks are sufficient.  Not sure if it is a framework or something else easy.  Thank you.

  Check 902

• I get an error code of the 57th. Can anyone help me regarding updates that don't download not?

  I'm trying to download the updates of windows, but some of them don't download and all I get is an error code of the 57th. Help please?

  How to view the log of update Windows

  Click Start and then click Run.

  In the Open box, type %windir%\windowsupdate.log

  and then click OK.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.  On the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the Windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the Windowsupdate.log file: http://support.microsoft.com/?kbid=902093

• I have 1 TB hard drive with about 140 GB taken up with the progsand files but the computer shows that only 5 GB of free space

  I tried to clean ups and Defrag, it shows all the files on disk, but they add that uo to 140 gb (about)

  Hello

  This program allows to see what takes up space on your hard drive.

  http://www.Jam-software.com/treesize_free/

  See you soon.