Remote management of the E2500

Similar Questions

• Windows Server 2008 SP2 remote management for the

  I am trying to install windows on windows server remote management 2008, but it continues to tell me that this update is not appy to this system.  I'm trying to manage windows Server 2008 Windows server 2012.  I have the updated 2012 in place like active directory and Server 2008 as a file server.  I like to leave the file as a unit without a head server. Any help would be great!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can I activate the remote management of the computer or the registry support

  I have a computer on the domain network that I need to log on to. No user is present on the machine.

  I tried to use remote desktop, but I think that it is not enabled.

  I am an administrator on this computer, I can tap into the computer and registry management.
  I was wondering if I can start here and then connect via with Remote Desktop, or what I have to do the old fasion way and activate it under System Properties?

  Hello Stephen,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  Hope this information helps.

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• Enable remote management on FVS336gv2 through CLI

  So I did something incredibly stupid to try to solve a problem, that we had and I have disabled HTTPS remote management in the GUI and now I am not able to make the interface of the routers.

  I can however, Telnet to the router from Telent is activated.

  How can I enable https remote via the CLI management? I can't find anything in the CLI PDF or I'm missing something.

  Thanks in advance!

  Hey,.

  Should be enough for;

  # remote_management https system set up

  # access_type all

  y # enable_ipv4

  # ip_version ipv4

  # Save

• RV042 - remote Managment

  So I activated the remote management of the router. If I test with the external IP address and port number, it works from the INSIDE of the network, but testing from outside of the network, it does not work. I suppose by activating that I don't have to install an another other rules anywhere else, but I could be wrong. Anyone have any ideas?

  Managing remotely over HTTP is no longer supported due to security problem. HTTPS is required for remote management with the latest official firmware bit.

• Is the Add On portal/site down today? Try to get the XUL Remote Manager add on.

  Cannot get to the area to search/Download Manager Remote XUL. Any ideas what's happening? I get "the connection was reset", "Problem loading Page" etc...

  https://addons.Mozilla.org/en-us/Firefox/extensions/?sort=hotness

  Hello Elwayisgod
  It is for me. Have you tried the direct link to XUL Remote Manager?
  https://addons.Mozilla.org/en-us/Firefox/addon/remote-XUL-Manager/?src=search

  Have a good day/night

• How do I restart the esxi remote management service

  Hi friends,

  The ESxi Server console is on screen 'Marketing Management Service', we can get into the ESXi console.

  So how do restart the serivce to the ESXi remote management?

  Thank you.

  If you can connect to the host, then you can run this: Get-VMHost | Foreach {Start-VMHostService - HostService ($_ |)} Get-VMHostService | (Où {$_.-Eq-clés "TSM-SSH"})}

• You run the remote Manager

  Friends,
  as I prove the Manager remotely to run successfully.
  I followed the installation documentation and start the remote remotemanager.bat Manager, then when I can prove that it is running, it loads a console and designer
  
  Thank you.

  Remote Manager allows you to run code on a remote box. You can create a jar file that performs a task. Copy it to the JavaTasks folder on the server of the IOM and the Manager remote server. When you perform your connection by using a resource, you select a remote control for the type of task, then it shall provide the values of Manager remotely as well as the resource.

  An example of what it does: Let's say a 3rd party host your servers, but they can not just open all the ports you need. Instead, you install remote manager and then they have to open 2 ports Manager remotely (if you are using SSL) and all information will be sent through this port.

  You can test that it is running by accessing the console design and open distance element manager to make sure it contains running.

  -Kevin
  Give points where points are earned

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• simple question re RD230 module for remote management

  Hello

  Just bought and installed Rd230. Installed win2008 R2 SP1 (manually... not with easystartup).

  I read the for the management module user guide remote. Is superb! One thing... How to set up the MMR? (Address IP... etc). It is not in the BIOS... I don't see any prompt at startup to access a utility of config for IT... any help?

  Thank you

  M

  You will find information conrfiguration and answers to the other questions linked MMR in

  ThinkServer RD230 and RD240 Remote Management User Guide TeleManagement ThinkServer RD230 and RD240 user's guide:

  Download.Lenovo.com/ibmdl/pub/PC/pccbbs/ThinkServers/00697mst.pdf

• microsoft-windows-windows remote management 1530 WARNING 2012 windows server

  1530 WARNING 2012 microsoft-windows-windows remote management server

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote Desktop left the unlocked console session after I disconnect, - BAD!

  Often, I connect to my Home PC, Windows XP Pro SP3 running to work.  When I leave the House, the session is locked.

  I recently discovered that when I disconnect from a remote desktop session, the computer is left * unlocked * even if I disconnect the session by locking the PC.

  I'm fairly certain that it wasn't how things behave initially.  This change with SP3?

  Currently, I connect to work with a Windows 7 Pro (64 bit) machine, but there is this problem with my old laptop which ran from XP Pro SP3.

  How can I stay locked to disconnect the console session?

  END THE SESSION IS NOT AN OPTION.  I have user programs that run in the session that must continue to run. I have need of the session is running, but locked.

  Hello

  In my case it was the full client of Teamviewer which is a problem, including a version earlier than 5.1.9385, when I upgraded to this one, the problem disappeared!

  Now there's another question that should be checked, if you Live Mesh Beta (which runs on windows XP and not a new one which has no Vista/7), then there are chances that you have activated the Remote Desktop feature, you can find two devices under the 'View' node in the Device Manager named 'Live Mesh curtain Driver' and 'Live Mesh Mirror Driver. You can turn them off, restart and check if the problem persists.

  A last suggestion if the above could not solve the problem is to update the drivers of network card in your machine.

  I hope this helps.

  George Simos

  Microsoft MVP - System Center Configuration Manager

  MCSE 2003, MCTS, ConfigMgr virtualization

• Remote management

  Remote management function are removed from the EA series Linksys Smart Wi - Fi from the Firmware?

  I think that the reason why remote management is more than just an option, it is that they came with smart wifi linksys firmware. No need to take note of the ip address, but you must pass www.linksyssmartwifi.com in order to access your router remotely. The Linksys Smart Wi - Fi works on the web and you can access it from anywhere, using a secure login account.  So you can be on your computer, your mobile phone on-the-go, or even on your computer at work and still have access to your home router settings and the activity of network using Linksys Smart Wi - Fi.

• EA2700 and remote access to the DVR

  Does anyone have a solution for the router settings allow access remotely
  Recorders digital windows and Linux?

  Justme2012 wrote:
  OK, so now I activated Remoting but the remote routers
  Management port is different from the default port on the DVR.

  The ports must be different. In this way it will not create a conflict. No two devices must use the same port numbers. Once again as what has been mentioned in this thread, you must use the port number provided by the manufacturer for the DVR and just leave the router uses it is default remote management port. This is to ensure that there will be no conflict. To check if the ports were opened successfully you can do an audit of port. You can use this site to check it out. http://ping.EU/port-chk/