Removal of cells for the OLAP CUBE

Similar Questions

• Several numbers of cell for the same person

  Is it possible to store multiple numbers of cell for the same person in my contacts? For example: I have a contact with two phone numbers, these are all cell phones, but in the contacts that they marked as the default cell and home numbers. When I am trying to change home to cell number and record this is not registered. It is always the cell and home numbers. So my question is: how to change all the numbers to cell Type?

  When you change the contact, press the label, scroll and choose custom label. You can't have two identical labels, but you can have labels custom as mobile2, mobile3, etc.

• Update problem can remove them except for the most recent? Thank you!

  Hello!  In Control Panel, there are about 20 programs that all say the same thing.  They are updated for Windows and IE 8 security.  The only difference is the date, which date as far back as 2010.  Can I remove them except for the most recent?  Thank you!

  # They are all necessary.

• How to change the 'Drive' for the BSO cubes (just like we do using "alter tablespace" for ASO cubes) using MAXL etc.?

  Hello team,

  I'm trying to make a backup copy of the cube by using the copy commands, BSO

  but after copy, I need to change the drive letter (for the data and indexes of the files) using MAXLs.

  I am able to do for cubes ASO using "Alter tablespace" i.e. for example, change "D:\" car ' to 'E:\. "for the tablespace files.

  I need to do the same for the BSO cubes? any idea?

  Kind regards

  Amit

  Don't forget while you can also change the drive it can't displace data. You would have to export the data, delete the database, change the disks, and then reload.

  For the actual command of MaxL watch the MaxL Alter Database command. You can add, dorp or set volumes of disk for ind and pag files

• Billing problem - removed company CC for the teams. How can I join the program?

  I just got an email from Adobe customer support stating that my business teams as withdrawn from CC. As far as I can tell the problem is due to the expiry of credit card that prevented the charges from 2016. I tried to change the business account information to insert the number of the renewed card, but the company has apparently been removed from CC for the teams. I can I join the program?

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Operating instructions for the flying Cubes?

  Hi, can someone give advice on how / where a tutorial is for the next idea?

  I would like to create cubes 3D (possibly with a hand-drawn aesthetic) flying in a group. The idea is that the Group of cubes swoop and flies like a bird.

  Is it possible in After Effects or is it more a cinema 4 d / 3Ds MAX project type?

  Thank you!

  You can create cubes in AE using 6 squares 3D solid or shape layers, parent layers for a 3D no and then fly the autour null in a 3D space. You can also create cubes and add textures in C4D lite, do driving around the animation in the 3D application. If you want to add the swarming of behavior like a flock of birds using certain automatic behaviors and you are on a budget, then using a 3D opensource as Blender (http://www.blender.org) application will give you a bunch of tools. I think you want to make a single object of that kind of looks like a bird with a bunch of cubes, some for wings and maybe a few others for the body, and then to rig the cubes on 'bones' so that you can create wings will require complete application 3D as Blender or the version of complete C4D because C4D lite has a very limited tool set. All 3D approach will require some textures or tweaking or plug-ins to simulate hand-drawn effect.

  If you want a look designed to hand and you have some rudiments of drawing and want to learn the technique of cell animation then you can hand draw cells in Illustrator or Photoshop or same æ and then doing 2D animation there. There are a few software solutions to make animations drawn by hand, including Flash Professional (which is provided with a subscription to the CC), but there is no open source apps I know dedicated to hand-drawn animation techniques. Commercial applications run from a few dollars to a few thousand. Good technique depends on your skills and your experience, the time available yo got work on the project and what you want the project looks like when it's done.

  The best way to make a cube from 3D layers must compensate for the z value of the anchor of the same value as X and Y, then rotate the multiple faces of 90 ° 5. For example, suppose you want a cube that is 600 pixels high. Here is a step by step.

  1. Create a new publication using the settings of composition standard square pixels (HDTV 1080 29.97 for example) which is quite long to include the entire shot, you try to create
  2. Select the rectangle tool
  3. Select the fill and stroke to use
  4. While holding down the SHIFT key to draw a shape of rectangle anywhere in the model
  5. Press U twice to reveal all the modified properties of the rectangle
  6. You should see something like this:
     
  7. Set the size of the Rectangle traced 1 to 600, 600
  8. Reset the position to transform Rectangle 1 0.0 to center the rectangle in the composition Panel
  9. Click the Add button to the right of the shape 1 layer content and add paths to squirm and make some adjustments to give your cube glimpses caught something like this:
  
  
• Press the a button to reveal the anchor point of the shape layer
• Make the layer 3D shape
• The anchor point must be 0,0,0 (Note: If you use a solid 600 X 600 300, 300, 0 is the anchor point)
• 1-way Rectangle as 600, 600, that you'll want to set the z value for the anchor point to the half of the width of the rectangle then adjust the anchor of layer 0, 0, 300
• Duplicate the layer of the form 5 times
• Select all 5 layers and press the r key to reveal the orientation and rotation of each layer property
• Let the shape 1 layer to the default rotation value
• Rotation 90 ° 2 layer shape in there, 180º 3 shape layer in there, 270º 4 shape layer in there, shape layer 5 90º in x, and 270 ° 6 layer x shape so watch the layers like this:


• Add a null value to the composition and make 3D null and name Cube 1
• The value null is now at the center of the global space of composition and 6 layers as a group are arranged around the null value
• Make sure that the Parent column turns in the time line (make it visible by right-clicking in the column name bar)
• Press r or u close the layer properties, and then select all shape layers and set the parent to 1 Cube and then lock the shape layers, so your timeline looks like this:
  
• Now, you can animate the position and rotation and adjust the scale of the null value to control your cube. Add a 3D camera and have fun.
  v
• To set up a herd of these cubes or build a body unlock all layers and start duplicating. [The best way to do that is to select all six shape layers, press Ctrl/Cmnd + d then Ctrl/Cmnd +] to move duplicates to the top and repeat. When you have made all the copies that you want to lock the camera layer, press Ctrl/Cmnd + a to select all layers, hold down Ctrl/Cmnd key and select all the controllers of null and shy then all layers form like this:
  
• Click the shy skin layers third icon from the left at the top) and you have only your cube controllers to animate. Now, you can size, scale parent animated and even these together to create your bird like this:
  

This should give you an idea of the creation of a bird in flight in AE. Personally, I would probably use Blender or the full version of C4D, then import the project into AE to the final composition. Mixer has some large shader effects drawn by hand and it is much more easy to rig and animate an element like a bird.

• First time to create the OLAP Cube - problem of aggregation

  I'm new to OLAP technology and I want to build the first OLAP cube. I use the scott schema is:
  
  1-building dimension on the table 'DEPT' with a level deptno.
  
  2-building cube with a sal of measure on the table 'EMP '.
  
  
  Emp table
  
  DEPTNO SAL
  
  20 800
  30 1600
  30 1250
  20 2975
  30 1250
  30 2850
  2450 10
  20 3000
  10 5000
  30-1500
  20 1100
  30 950
  20 3000
  10 1300
  
  
  DEPt table
  
  DEPTNO DNAME
  
  10 ACCOUNTING
  SEARCH 20
  30 SALES
  40 OPERATIONS
  
  
  
  When I use the wizard to maintain and then display the data, that the sum of the wage is not accurate, it looks like
  
  sum
  
  all departments 5550
  accounting of 1300
  Researches. 3000
  sale 1250
  0 operations
  
  
  the values must be
  
  sum
  
  all departments 29025
  accounting 8750
  Researches. 10875
  sale 9400
  0 operations
  
  Why the aggregation of the values for the ministries are not accurate?

  Problem is visible in your table.

  Emp table

  DEPTNO SAL

  20 800
  30 1600
  30 1250
  20 2975
  30 1250
  30 2850
  2450 10
  20 3000
  10 5000
  30-1500
  20 1100
  30 950
  20 3000
  10 1300

  There are several Dept. not with different sal. In OLAP when you load this record then the last record just victories. That's why, if you look at it then you will see the value that you see is the last value is charged.

  To solve this, you should do a group (emp) deptno and sum (sal). Load the folders and you'll see the correct result.

  I hope this helps.

  Thank you
  Brijesh

• Automatic switching of WiFi in the cell for the data not work, requires a restart of the phone

  The phone is a peak of Geeksphone, and the version of the operating system is 1.4. The problem is with the automatic switching of the WiFi to cell for my data. If I take the phone outside the WiFi range, it does not acquire the data (2 G, Edge, H or 3 G) signal and so I have no data. I left for hours without success. The only solution is to reboot the phone, then outside the configured WiFi connections and it will collect data signal. When I re - get the WiFi area, it captures the network and without problems.

  I also had this problem with version 1.1. I upgraded to think it could be fixed, but he did not.

  Thank you, Ralph. There was an update available which appear not yesterday. After the installation, I get the options that you quote, namely to turn the cell data in the notification area. Thanks a lot for the tip and the quick response.

• Removal of password for the drive HARD HP 2133

  Former emploee returned HP 2133 p/n: FU351EA #AKD s/n:[personal information deleted] and he forgot BIOS password and HARD drive. I have the BIOS reset and cleared BIOS password. Please give me a procedure to remove the HARD drive password. Data from hard drive can be wiped out.

  HDD password is not removable, as practical a point of view. Very persistent. I have a drawer full of hard drives protected by. The only thing you can do is to replace it, and even that will not work as the system could simply transfer the old password for the new hard drive. Here is a youtube video using Hiren's Boot CD and boot sector editing tool. This does not function normally, but may be worth a try.

  http://www.YouTube.com/watch?v=R1hfKeEvsn4

• Windows 7 - Excel 2010 - unable to connect to the OLAP Cubes SQL 2000

  Running 32-bit Windows 7 - Excel 2010 - unable to connect to SQL 2000 of the GreatPlains OLAP Cubes - message Getting connection refused actively.

  It works with XP and even load Excel 2010.  I can't find what I need to change in win 7.  I guess that's the firewall or driver settings.  I completely disabled the firewall and still no luck.  I also took the file to connect to the XP machine and tried to use it as an existing connection and still have the error.  I ran Excel on the Win 7 XP SP2, XP SP3 and still no luck.  I have spent hours reading and researching the issue and can not find an answer.
  I tried to change the OLAP service account and open all ports on the server.  Still nothing.  The error message will connect to the client computer and the server does not record demand, so I think that I don't yet get on the server.  I do not understand as well as if the message is actively refusing connection.
  I can run the cubes very well on the server and on the XP SP3 with Excel 2010 machine.
  I'm in my troubleshooting garnis.  There has been some problems, that I have not been able to solve in Microsoft Servers and this is one.  I know that there is an answer.  I'm just not see it.
  Thank you!!

  Hi Litiasheldon,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  SQL Server (TechNet Forums)

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

   

  I hope this helps.

• Remove empty space for the search query entry

  Hi guys, I am currently using JDeveloper 11.1.2.1.0
  
  I created a search with the use of criteria to display, query and table, which works perfectly with success.
  
  But I would like to improve the research by removing the empty space for the entry. For example, search for the name (with the search operator = Contains):
  
  Entry: Adam-> Works Fine!
  Entered: < space > < space > Adam not work :(
  
  I would like to remove the empty space at the beginning of the end (trim()) part of the entry.
  
  Any suggestion or comments?

  Please take a look at this thread
  publish in the search criteria for the ADF

  Seems to be the same requirement.

  concerning
  Peter

• Failed to remove snapshot, impossible for the fret

  Hello

  I use VMware Fusion 4.1.3 with Windows 7 Setup. The original drive has a size of about 45 GB, the size on the disk of the complete virtual machine (of course especially the disk) is 124 GB.

  I had two snapshots. One of them I removed successfully (using the interface). Days later I wanted to remove it. He told me that I had to release about 20 additional GB of space first. After I closed the dialog box, the name of the snapshot has changed something technical, and after the restart of VMware, the snapshot was not visible in the list more.

  I created another cliché and tried to delete it. The same issue has occurred.

  Since then, my VM has grown at 124 GB, filling almost all the space left on my record of comments.

  I can't shrink the virtual machine using the VMware tools, given that this option is disabled.

  Is there something I can do? VMware starts when I free up additional space on the disc, which he claims so quickly. Without a method to recover the space, this virtual machine is a disposable solution

  Thank you
  GC

  If you don't want to fix here, that's fine, I understand.  If it is not obvious, the reason I (we) seek the support bundle is it gives us a picture pretty clearly and concisely what are the components without having to ask a lot of questions or give you specific instructions to collect the minimum amount of information for us to give you concise and accurate information based on the real facts.  If you want to remove the .tgz file in a password protected archive file zip and then private Message and it reach me the password I'll be more then happy to help you.  Otherwise, sorry, I don't have the time now to piece meal that.  I'm sure someone else will happen to your problem and will probably be more patience to deal with the lack of information and then I do.

  Otherwise, all I can say is that you need to free up an adequate amount of space on the host computer to solve the problem of the snapshot.  If you use monolithic discs vs split disks, then you need a fairly large amount (typically the size of the vHDD + a little extra) of free disk space otherwise that the operations are not successfully completed.  Split disks do not required as much free space (minimum 2 + GB) but don't try convent under the circumstances!   If any of the snapshots have been orphaned or the snapshot database is not accurate, then in some cases a way to fix the problem is to kill the snapshot database and then take a snapshot, and then delete it.  Obviously with the facts, I cannot make any specific recommendations and have just introduced what I illustrate why info is necessary.

  You might be able to find adequate information in the VMware KB to fix your problem, did you look here?

• How to remove music iTunes for the Mac, but NOT the iPhone

  I have an iPhone 4/4 s. I downloaded audio on the web through my iMac. I added this audio to my phone. Rather than most of the cases where people want to remove audio from their phone and not on their computer, I would remove the audio from the computer while keeping on the phone.

  Help, please?

  Secondary click on a song or album and use delete download (do not remove).

  

• How to remove searchnu Trojan for the Windows 7 laptop

  I think I got the searchnu Trojan after downloading the Livid software. Have you tried security microsoft scanner running and he can't find the thing... Anyone got any ideas on what I can try next please?

  Hi Jan,
  Follow steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• Member for the BSO cube formula

  Hello

  Cube of OSI, I created a member defined by the user in the account Dimension, which is calculated by a formula that uses the already existing members. (("member1"-"member2")/member1 = user-defined member) * 100; When checking the syntax of the formula of the EAS, its job very well, but when you pull the smartview report, user-defined member takes garbage and obtaining not calculated correctly according to the formula.

  Any ideas on that?

  Thank you

  It is difficult to help with the limited information in your message.  My wild guess is that it will be a problem of calculation, but I don't know.

  What value 'waste' are you?  Wear in any obvious way to 'member1' and 'member2 '?

  Is the dynamically calculated member and / or re-encoding Calc?

  Is - what the intersection that you get when you see the wrong number also include other members of the formulas or calculated dynamically?

  You use time balance or dynamic time series?