Removal of the battery would affect the warranty on the L50-B-174 Satellite?

Similar Questions

• Upgrade RAM would affect my warranty on Satellite L300 - 11G

  Hello!

  I would like to buy Toshiba Satellite L300 - 11G, but it only has 1 GB of RAM.
  I will lose warranty if I open the computer case to put the extra memory?

  Concerning
  Andrzej Hull

  Hello

  I don t think you would lose the guarantee after upgrade memory.

  The slot of memory must be placed at the bottom of the unit and it s fixed with one screw only.
  You must remove the plastic cover to get access to the RAM slots.

  I think that details and pictures about the upgrade of memory must be placed in the manual pre-installed you.

  My user manual contains this statement to upgrade which is very useful.

  So Don worry about you guarantee the validity. If you use the recommended Toshiba and modules compatible RAM then you guarantee will not be cancelled ;)

  Concerning

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

  If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

  Of the previous function of recipients.

• Stop U300-130 of the satellite so the battery is removed after the start

  Hello

  If I start my PC with the power of the battery only and then delete afterwards, even if I connect to the laptop do mains,.
  the PC will go down as if no power source is available.

  The same thing happens if I hibernate with a single battery, connect to remove AC battery and starts.
  the PC will run for a while (while the blue/red battery light stays on as if he was in charge) and then dies.

  Seems to be a BIOS problem, like anyone seen something similar?

  The laptop is a Satellite U300-130.

  Thank you!

  Hmmm. This problem is new to me and it s really strange.

  But first I want to say that it s not recommended and not recommended to remove the battery while the laptop is running and connected to the power adapter.
  If you want to remove the battery and then shut down the laptop first, unplug the power adapter, remove the battery, connect the power adapter and start Notepad.

  However, please page European driver of Toshiba and new BIOS is available, try to update!

  Welcome mate

• I receiven an e-mail from the windows team in my junkbox and would like to know if it's true or not? They ask to check my account. Email address is * address email is removed from the privacy *.

  I received an email from the windows team, but he was in my junkbox. They ask me to verify my account,

  but I m don't know if this is true or not? The e-mail address is * address email is removed from the privacy *

  Thank you..

  Hello

  Its a SCAM!

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  Scams by e-mail or web: how to protect yourself - understands what to do if you
  think you've been scammed.
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  How to recognize phishing e-mails, phone calls or links
  http://www.Microsoft.com/security/online-privacy/phishing-symptoms.aspx

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft would not email or call you unsolicited. Or they would know if there were any errors
  on your computer. So those are the frauds or scams to get your money or worse to steal your
  identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  ==============================================================

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://answers.Microsoft.com/en-us/windowslive

  Windows Help and how
  http://Windows.Microsoft.com/en-us/Windows/help

  Hotmail - Forums
  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

  Hotmail - Solutions and how additional resources
  http://Windows.Microsoft.com/en-us/Hotmail/help-center

  Hotmail - how to - FAQ
  http://Windows.Microsoft.com/en-us/Hotmail/Hotmail-how-do-i-FAQ

  Why my account is temporarily blocked?
  http://Windows.Microsoft.com/en-us/Hotmail/account-temporarily-blocked-FAQ

  What should I do if my account has been hacked?
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have Windows Vista with Microsoft Works. I would like to make the computer to be bilingual in English and Hebrew. How can I do? Just reply to * address email is removed from the privacy * thank you

  I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you

  Hello

  I suggest you follow the steps in the link below and check off the question:

  How can I get additional language files? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  I hope that the information above helps you.

• HP HDX 18 - Win 7 Home Premium (64-bit) CPU is palpable when the charger is removed from the laptop/notebook computer

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

  SOLVED

  Go to control panel > hardware and audio > power options > change settings > change advance power settings > managent processor power > political cooling system > set to battery for 'Active' option if it is selected as a liability.

  sas84_HeavyHitR wrote:

  I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

  The operating system is Win 7 Home Premium (64-bit).

  Corrections or suggestions would be very appreciated.

• I'm about to computer cover laptop MSI remove with the handshake...

  .. .and it open so that I can get dust that needs to be there because it is overheating. It's way past warranty, so there is no problem to break the warranty sticker. I've read up on the Internet on the question and would really like to know if static electricity is really the big deal that of some people argue that it is and if it is essential to guard against it all rummaging through the bowels of the laptop.

  http://www.YouTube.com/watch?v=MamAeWfHcrs shows the disassembly of the unit (it seems that the cr600/500 are similar). You're lucky if this video is correct because it shows that the fan is removed through the basic coverage.

  Just follow the video at 01:34, as it's the bit that you need to clean. Because you have to disturb the heat plates are becoming a new sink compound. The bits that are actually held by screws with the passing copper pipe by should have a gray grease like coating under and on top the songs they cover. This should be renewed.

  After getting that part you need to separate the fan and the radiator to improve air flow. The mat which accumulates can be quite dense and difficult to just blow.

• How can I remove all the images duplicate in a clip?

  I work with images captured from a game engine on a Mac.  When the graphics intense treatment get the graphics card of hard to follow.  What ends by goes, is that the map continues out of each image (for example, it ignores not frames), but is only able to do so at a reduced pace - say five images per second.  The cap Screen Capture software just at a rate predetermined - say, 30 frames per second.  The result is that the captured clip has loads of duplicate sequential images.  The positive point is that, since no frames have been ignored you get a reading of sweet butter if manually (laboriously) remove you each image to chip away at.

  Yes, is there a tool that will automate this process?  There is a script that does exactly what I need is called Frame Duplicate Remover available in the framework of Duplicate Remover - aescripts + aeplugins - aescripts.com , but unfortunately, this script is not compatible with after effects CC.  Can anyone think of another option for After Effects or Premiere?  Ideally it would save on audio for executives to chew as well.

  Thank you

  Hales

  Well, as a tenant CC, you also have access to AE CS6, and could work in the script you mention.   You can download it, immediately update and give it a whirl.  It will not interfere with other versions of AE on your machine.

  It's a pretty handy script; don't know.  It is also remarkable that removing duplicate frames does not affect the speed of movement.  Who would have thought.

• Removal of the dominant color and color correction to match the reference documents? the tutorial/guides/videos

  I searched some tutorials showing how to use SpeedGrade. I'm now comfortable with the UI enough to use after seeing these: http://www.youtube.com/user/AdobeTV/videos?query=speedgrade

  I am looking for tutorials that explain how to do a couple of things, first of all, I want to be able to remove color casts. In photoshop to do this you can use a curves layer and the use of the whole white point color chart and click somplace that is supposed to be white. and to the Prime Minister, you could do something similar with the color correcting fast. So basically that I'm looking for a way to target an area within a framework that should generally be grays, in the Anime, the eyes always be shades of gray, is as well as what I would target usually when you work with anime in photoshop first. If anyone knows a tutorial that shows how to do this type of color cast removal color correction in SpeedGrade could you please share a link.

  Some of anime the older 80 and 90 on the film, the film has aged and that's where the color cast came. There is also a loss of color information in all areas. For example in the image below. Heaven is supposed to be blue instead of green teal/sea.

  Another thing is back in the 80s and 90s many anime worked limited color palletes; something like maybe 16 colors in total, so many colors are used repeatedly. Thus, even with only a limited amount of reference material, I'd be able to get the corrections close. (I have no clips of reference for every single episode, only a handful of scenes from a handful of episodes).

  I have a few reference documents showing approximately what should be the color. So, my next question is if anyone knows of any tutorials/guides/videos showing how to use SpeedGrade to color correct a clip so that the colors match the colors used in a reference element

  I was also wondering on automatic correction based on an element of reference, although I'm guessing that this isn't always possible.

  When I looked at the websiminar: http://seminars.adobeconnect.com/_a227210/p738pxm9zs0/ about 43 minutes into it, a feature is shown that automatically adjust the color with a clip that contains a colorchart.

  I was wondering if a tool like that could analyze a start to clip at the end, to create a palette of colors used, and then compare that to the colors used in another clip and correct them. (a feature like this would be probably more useful/precise in anime that it would be long, but who knows.)

  Another question related to the user interface:

  I had a question, the only place where I see to access the colorwheels is in appearance, my video tab, I'm trying, just manages to adapt to 100% in the monitor.

  So I prefer to hide or reduce the different looks (maybe even with a keyboard shortcut) so that I can access the color tools it covers, I've attached a picture of what I'm talking about. I know pressing 'P' cache at the bottom and thought that maybe it already is a way to hide/minimize/reduce the aspect presets to access the tools behind them without narrowing down the size of the preview screen.

  

  It's a hard thing to do. SpeedGrade has an estimator of the matrix which aims to draw a camera shot in reference, but it only works if there is a graph of Macbeth in the framework - and you of course that.

  Short of writing a custom plugin, you will have to do it by hand - if there is a true 'gray' in the framework then the pickers for the 3WCC/FCC in first allows you to get the right temperature, and black/white levels can be removed to the limit with their pickers (assuming that something on one of the frames is supposed actually to be black or white). Fix nonlinear cast where the RGB layers are each affected by different curves is a much more complex process, and not automatable in everything I know. However, once the white point Beach and brightness are attached, you can still make some visual adjustments of the balance on a range of colors with secondary correction tools in the 3WCC.

  If you use the first and you want more help with these tools, please ask in the Premiere Pro forum.

• iCloud backup 4.5 g could not be removed from the iPad, iPhone, Mac

  However, I have 5GB on iCloud, iCloud frequently reminders me iCloud is almost out of memory.  I checked the iCloud, storage, and it is wired that backup 4.47 GB of storage and when I want to delete thoseBackups and it says takes backups only 0KB and I can't remove all backup storages.

  I called the Apple Support, they told me that my iCloud had almost 5 GB of free, while for me, iCloud has only 150 MB of free space.  They said wait a few days, iCloud can be almost free. While for me, iCloud is still almost out of memory. They have not only to troubleshoot.

  I guess that the iCloud as SW goes wrong in the server.  Who can help?  Need to rebuild a new iCloud account?

  I tried to send a mail to Apple, and I can't find his e-mail address.

  Wang Yubo

  

  I had a similar problem after than my iOS updated. My backup would not be complete, he appeared as 0 k, the other upward showed up to 0 KB and I don't have an option to remove my existing back upward.

  I turned off back upward and while I don't then have an option to remove my previous upward, the previous upward (0 KB) disappeared on his own. I could then turn upward back, Ko 0 return up to did not reappear and I could start and finish a new upward.

  Some have reported that once they turn their backs on the wide, the previous upward (0 KB) does not or only in the affirmative, he reappears when the reverse is turned back on (even if they are then able to make a new backup as much as they have space).

  It seems that in some cases KB 0 backup data is corrupted and indeed takes space in the cloud and it seems not that it can be removed by the user, if that's what happened in your case, contact the Apple support, (change the country if needed) they were able to remove the data corrupted for some users. If this link does not work for you, select 'Support' in the black menu at the top of the page and choose "More products" on the page that appears.

• If a video or a TV show is removed from the iTunes Store, can still play you if purchased while he was here?

  Question on the iTunes Store. If a video or a TV show is removed from the iTunes Store, but you have already purchased, you lose it at your library for playback on iOS, AppleTV or iTunes?

  I ask because this happens to Netflix, and I found the verbiage that affect in terms of Amazon, but not sure on iTunes. Can we all know or have seen this?

  If buy you it and that you have downloaded on your disk, it is up to you. If you deleted it, or just listened to it, and the file is no longer available in the store, you will not be able to re - download.

• The photos in iPhoto and the same pictures? Is it possible to remove/save the photos to iPhoto?

  The photos in iPhoto and the same pictures?  Is it possible to remove/save the photos to iPhoto?

  Yes, they are literally identical. That is to say, time iPhoto Library and photo library (link) to point to the same files on your drive.

  The two libraries does NOT duplicate these files. If you delete the iPhoto library you will find very little storage space.

  My suggestion would be to leave in place iPhoto library until you have the habit of Photos and know with absolute certainty that all migrated to Photos correctly. Even in this case, you can copy, save a copy on a disk external backup and only remove them from your main drive.

• How to remove "around the web" pop ups?

  How to remove 'around the web' pop ups of Safari on my macbook air?

  Download and run Malwarebytes Anti-Malware: http://www.adwaremedic.com/index.php

  You can also remove the adware manually by following the steps provided by Apple: https://support.apple.com/en-us/HT203987

  After that, make sure that your default search provider is set to the one you always use. To do this, open Safari - Preferences - research.

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Also, I think it would be a good idea to install AdBlock.