Removal of the word on XP Home Edition files

Similar Questions

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• HOW TO REMOVE FORGOTTEN PASSWORD ON WINDOWS XP HOME EDITION?

  HOW TO REMOVE THE PASSWORD IN WINDOWS XP.

  If you mean a Windows password and not a hardware password, then:

  A. Si the password for the built-in account named 'Administrator', Microsoft's strategy does not allow for advice on this subject which will be discussed in these forums: Strategy of Microsoft

  B. Si the password for any account Windows XP, and then connect to an account with privileges "computer administrator", go to control panel > user accounts and change or remove the password.  If you do not have an available with privileges "computer administrator" user account"AND you have not used the account named 'Administrator', you can find it as follows:
           
  In Windows XP Home Edition, restart in Mode safe mode by pressing the F8 key immediately after the power on sequence.  If the Windows logo appears, you've waited too long and must try again.  In Safe Mode, Administrator indicates on the Welcome screen.  The default password is blank (no password).

  In Windows XP Pro, either use Mode safe mode as above, or with any other connected accounts welcome screen, press CTRL + ALT + DELETE.  The classic logon box appears.  Enter the administrator user.  The default password is blank (no password).

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• I'm trying to download the sp3 for xp home edition and it downloads or give me the bad vervion of the windows package.

  I look for windows xp home edition service pack 3 for download and update my pc and it still gives me the service pack to another version of windows, and I just can't download it.

  Hello

  If you want to check which is the service pack that you have on your computer,

  Click Start, right-click on my computer.

  Select the properties option.

  The version of the service pack it will be there.

  If you have Service Pack 1 has already been installed on your computer, you can go ahead and install Service pack 3

  Otherwise, you must download and install Service Pack 2.

  And later, you must install Service pack 3.

  Service pack 1 and service pack 2 Service pack 1 has joined in.

  Here are the links where you can download and install SP.

  Service Pack 2: http://www.microsoft.com/en-us/download/details.aspx?id=28

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  Let me know the status of the issue.

  Kind regards

  Momo.

• After a recovery, I can not download the SP3 for XP Home Edition and automatic updates do not work without it.

  After making a recovery, my Automatic Updates download updates and SP3 will not download. The error message says that I need to download SP3 and tried about 20 times without success. I have Windows XP Home Edition. The SP3 update was on the computer as it came out and was still on the computer at the time that I made the recovery. I have Webroot and Windows anti-virus.

  I did not stand alone Setup because it indicated that it was for computer scientists and and download on several computers.

  This warning from Microsoft can be ignored. If this also fails, try please report and the stand-alone Installer. I suggest saving the Setup program and then run it from the save location once the download is finished, this will avoid having to download it again. The SP3 installation may take some time according to the PC on which it is installed. 30 minutes is longer than some I've done but less than others.

  To determine if SP3 is still doing, looking at the disk activity light and listen to the disk activity. If the light blinks and you can hear sounds from the disk drive, it is likely that SP3 is still what he needs. You can also start the Task Manager before starting installation (via ctrl-alt-del) and monitor the process of CPU consumption on the process tab to see if things are still active.

  "When I try to manually install SP3, I get two windows.

  My assumption is that you're trying through Windows updates, if this is not the case please can you explain exactly what you do?

  Tricky

• Use the original Windows XP Home Edition CD to reinstall

  I lost my cd of windows xp home edition, Microsoft sent me another copy. Now that I moved I lost the copy, but I found my original. Now I have to fix my turn, is it safe to use my old copy. Or I have to format the tower all over again?

  * original title - Microsoft has sent a copy of windows xp at home, now I lost that one, I found my original copy, I can still use it *.

  Use 'The Original' with the original product key. For OEM versions, the product key sticker is one on the side of the tower case. Commercial versions have the key of product inside the box.

  Insofar as you are using the CD, you must do a "repair installation", the CD must be at the same level service pack as what is installed on the tower.

  Create a "Slipstreamed" of integrating XP SP3 version
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Having the license for XP Home edition, but lost disk number. Need a new drive.

  received an old Compaq computer less hard drive. you want to get the new hard drive and load XP Home Edition operating system on it. The figure of 25 for the license I have, then, how can I get a drive for it.

  If Windows XP came preinstalled on the computer, contact the manufacturer of the computer for a replacement CD.  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals   Boulder computer Maven
  Most Microsoft Valuable Professional

• How to open just the word from a flash drive files

  How to just open the word files from a flash drive, do not see the excel files that I saved to the flash drive

  Launch Word.

  File open - navigate for flash player and select file/s that you want to open.

  Verify that Word is set to show only the only Word documents and any documents

  

• How to open DBX with Windows XP SP3 home edition files?

  I've sent e-mails that have been compacted to OE and now reside in a .dbx file which I would like to open and restore OE

  When I try to open it I get redirected to a file extension search prompt.
  Thanks Chuck 57

  I've sent e-mails that have been compacted to OE and now reside in a .dbx file which I would like to open and restore OE

  When I try to open it I get redirected to a file extension search prompt.

  All your messages are stored in dbx files and open with OE. Be more specific.

  After compaction, items sent is empty? If so, check the Recycle Bin (not deleted messages) and the message OE for a sent file Items.bak store. If you find one, post back before doing anything.

• How can I remove all the features of internal home network security?

  I have no need to prevent someone from my network home to access anything whatsoever.  But that I will constantly meet problems with passwords are required or printer is 'offline' when they aren't or blockages of other types of intrusion, forbidding me other computers on my network.  I am the administrator of networki here and I have no idea how to deal with this...  How can I simply delete all these security steps so I don't not all those pesky problems all the time?  I did everything on every computer that I can find to do.  Is there a security overall unique command disabling?

  Hello

  1. what operating system work?

  2 have you made changes on the computer before this problem?

  3 work on a wired or wireless network?

  4. what security software you have installed on your computer?

  If you use Windows 7 follow the mentioned suggestion:

  The problem with programs or you being blocked, you can see the following article on how to add exceptions to the firewall.

  http://Windows.Microsoft.com/en-us/Windows7/open-a-port-in-Windows-Firewall

  To save the password on some cases, you can use Credential Manager.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Credential-Manager

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/taking-control-of-computer-security

  Hope the above information is helpful.

• How to set the password to protect the network, Windows XP Home Edition

  Another PC can directly access my computer on the Windows network, so I want to set a password to protect my computer.

  There are two basic methods to connect to a computer through a network.

  The first is through Remote Desktop connection.  This method requires that a user connect as if they were sitting in front of the computer.  So simply assign a password for each user in the user Panel must control this access road.  If I remember correctly, Remote Desktop connections cannot do XP Home computers, so this may not apply to you.

  The second is through the sharing of files on the network.  With XP Home (forced Simple File Sharing), each connection sharing file valid as long as the user "guest".  So to control this access, you must assign a password for the Guest user.

  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  HTH,
  JW

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• OK I can't access the internet cause my connections are all messed up up.so, how should I do to change the original settings so I cam surf the internet using XP Home edition

  I'm trying to set up a connection to the local network, but when I go through the sound Wizard not to catch a connection any help is greatly appreciated

  Hello

  -What changes have been made to your computer before the show?

  Follow these steps and check if the problem persists.

  Step 1:

  Repair winsock

  a. Click Start > RUN, type "netsh winsock reset" and then click OK.
  b. command line flashes and then you can restart your computer.

  Step 2:

  Reset the TCP/IP settings.
  http://support.Microsoft.com/kb/299357