MEMORY NOT DETECTED
Hello world. On behalf of all those that forget to say 'Thank YOU FOR YOUR HELP' (including myself) THANKS for TRYING to HELP EVERYONE and registration we probably a good chunk of money. Follow the good aid flowing. Now my question is: How can I get my Toshiba satellite L25-S1217 to detect the correct amount of memory on the information system. I installed TWO a GB chips but shows only 896 MB of RAM. I installed them one at the time and rebooted each time. I also changed values? I'm on Windows XP Home version 2002 with Service Pack 3. Thank you all for your help and your time.
Purchased from a manufacturer of memory that has a guarantee to political work, such as crucial.com
(Max 1 gb PC2-5300 / slot)
Tags: Windows
Similar Questions
-
Satellite M40-276 - memory not detected in the Bios upgrade
Hi people!
New kid on the block!
I have a client with a toshiba Satellite m40-276. I've updated his memory to give it a little more to play with...
Went into the bios to see if everything was OK but no projected additional memory. I removed the new and old memory and put in the new 1 GB module and restart the computer.
The bios has not yet changed the size of the old memory?Went to windows and of course that the memory has been detected it normally?
I added the other memory module and went into the bios again, but no change it?Windows, however, recognized that the two modules?
His computer is the same bios to factory and has never been updated.
My questions are... why the bios doesn't recognize the upgrade memory? It will help in upgrading the bios?
Enjoy all the suggestions I can get on this issue.
Thank you
bookie56
Generally, if you upgrade RAM using tested compatible modules, that should be recognized correctly.
We do not know what modules you use, and I guess that there is a compatibility issue.RAM on Satellite M40 276 can scale up to 2 GB of RAM and compatible modules are:
DDR2 400/533 256 MB (PA3389U - 1 M 25)
512 MB DDR2-400/533 (PA3412U - 1 M 51)
1 GB OF DDR2 400/533 (PA3411U-1M1G) -
SanDisk memory not detected on the computer card reader.
I'm a reader of memory cards SanDisk who accepts memory cards from cameras and any photos on the computer. When I insert into my computer, nothing appears. When I look in 'My Computer', I don't see anything about this, but it makes a noise every time I insert or remove the side of my computer. How can I find the memory on my computer card reader?
Hi shelbylorene,1. don't you make changes before the show?Step 1: Check if the device is detected in Device Manager. Follow the steps to go to the Device Manager
a. Click Start, type devmgmt.msc and press to enter.
b. Locate the device name in the list of Bus USB controllers.
c. If you see point relative to the SD card, right above and click on uninstall.
d. restart the computer and check if the card installs successfully.Step 2: If the device is not visible in the list of items in the Device Manager, and check if it is the hidden device.
a. click view hidden under display devices.
b. expand all winks in Device Manager.
c. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.
Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite Pro P100 - SD memory not detected
Hi all
I have a satellite pro p100
and recently installed vista
The sd slot is installed correctly on the Device Manager, but nothing is coming when I insert an sd memory card
not even the reader saying 'nothing to.
They appear on the Device Manager and it says "installed correctly."This same sd slot works fine on XP
I tried to installed the XP drivers but, nothing seems to change
I tried the 2 drivers in the list of vista, but they seem to be for the formatting and startingI'm starting to wonder if you can really read a memory card on vista?
Thank you all
Hello
It seems that you are alone with this problem. is it possible to test it with other compatible maps?
You have installed everything according to instructions facilities including Quick Fix Engineering version 92.81.90 document?
-
Why my Satellite does not detect a new module of memory?
Hello
Today, I installed a new memory module SDRAM 128 MB in my Satellite 1670. It is not a real module but on the package is the right code: PA3005U.
After that I turned on the computer, it is not detected then I use still 32 MB of RAM.
How can I solve this problem?Steef
Hello
The fact is that you use the right memory module. It is not easy to say why the new module is not recognized correctly. The slot is maybe defective. Try to remove 32 MB module and use any other location 1. (Unfortunately I put t know if this device has two or one single location for memory expansion).
-
Memory card is not detected on motorcycle G2
Memory card is not detected on motorcycle G2
Hi pls memory card delete and restart and try otherwise then your memory card is dead
-
USB card reader does not detect memory cards
memory card
I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?
Hello
If you can't get the working card reader, you can use a card reader that is
not expensive.-------------------------------------------------------------
To check your version of Windows.
Check with the manufacturer of system and their forums (if any) for known issues.
Your other USB devices work?
Try a system restore to before the drive stopped working if possible.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-----------------------------------------------------------
If necessary:
References to Vista also apply to Windows 7.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
Show hidden devicesLook everywhere EXCEPT USB controllers for your device and if find you them (maybe
plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
for all instances.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and methods of Vista and Windows 7 are the same
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick the three 1st choice
to see if one is there.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems----------------------------------------------
This can be useful to determine if the wrong driver is loading.
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlI hope this helps.
-
My pc does not detect my memory card!
The memory card or the drive is not detected by my pc,
I tried to insert another card then try the other USB port then insert the reader on a different pc to windows 7.
Nothing has worked.
Please help me.
___________
Concerning
Vaibhav
Hi vaibhav,
Thanks for posting the request in Microsoft Community Forums.
1. What is the brand and model of the computer?
2. to confirm, is automatically set to the built-in help drive or external SD card reader?
3. it worked before? If this isn't the case, please refer to this article.
After you have inserted the memory card for the player, you can check the Device Manager to see if it is or not.
Open the Device Manager:
http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager
If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
Open the hardware and devices Troubleshooter:
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
For reference:
I would say as update you the chipset for the later drivers and check the results.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
If you use an external SD card reader and you are unable to detect the drive to another computer, you need to either replace/repair the unit.
Hope this information helps. Response with status so that we can help you.
-
Card memory Smartphones blackBerry not detected after defragmentation to 8900 "BOLD"
Hi, I defragmented the memory card in my "BOLD" blackberry 8900 mobile via my laptop and then the memory card is not detected in my laptop but it is detected when connected to a laptop computer. Please, help me make my memory card in my blackberry.
Hello Kartheekbk
Welcome to the Forums of the BlackBerry Support
Have you tried to format your memory card yet?
Please try this Knoweldge Base and see if that helps:
KB10527 : Media card can not be read. Check that the memory card is formatted
-
ESXi 6.0.0 detects no internal memory not?
Hello, I am to evaluate ESXi 6.0.0 on a core 12 MacPro6, 1. However, the ESXi Setup program does not detect the internal 1 TB SSD. I checked the drive works and is detected by EFI. Setup will detect and install any drives that I plug in external, but not the drive internally.
Any thoughts on how to get it to work?
Hello
Although I am not a Mac expert somehow, you can check if you have the correct version of the BIOS as proposed in VMWare HCL VMware Compatibility Guide: search system version MP61.88Z.0116.B05.1402141115
You can also read Re: material support on ESXi 6 APPLE because a user with 6 ESXi executed successfully on the MacPro 6.1...
cykVM
-
Qosmio G10-133 - battery not detected after upgrading to Windows 7
Hello, I hope someone can help my frustrations here.
In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.
The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.
I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.
In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.
If anyone has any ideas I would really appreciate it or all the links to the drivers etc.
If this is sorted my laptop should last for 5 years!
Thanks for reading this.
Dickie
Hello
First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!
To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.
If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought
By the way: some nice and interesting tips on battery:
http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm -
Satellite A205-S5880 (PSAE3U) downgrade Vista to XP - does not detect HARD drive
Hi all
I got this hair loss situation, I had a satellite A205 - S5880 (PSAE3U) and decided to downgrade to XP, I got all ready drivers for XP (I have the EMEA support site and the wireless from a Czech website), I have my windows XP SP2 g CD and I get after loading everything Since the CD that my HD is not detected or not recognized and it tells me to make sure I have connected (I know I do).After doing a search of loong on the web, I discovered I have need the drivers (or something like that) to my HD which is a Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA). My bios won't let me put my SATA to IDE (or something like that) also to update and nothing, please I need my Windows XP CD to read my HARD drive, and I can take care of the rest (at least I think so, otherwise I'll ask again: D).
I also found that I can watch my motherboard chipset for motherboard for my HD controller, it ' s (i think) a toshiba ILHAM v1.00 or Intel Crestline - GM GM965.
Maybe this info also works: Intel ICH8MI would totally be apreciate all the help, thanks in advance. I am able to give any other information you want
in any case here is a summary of my pc with everest
================================================== ================================================== ========================
SUMMARY OF EVEREST
================================================== ================================================== ========================
Computer
Computer Type ACPI (Mobile) 86 x PC
Operating system Microsoft Windows Vista Home Premium
OS Service Pack Service Pack 1
Internet Explorer 7.0.6001.18000
DirectX DirectX 10.0
Computer name USER-PC
Name of the user
Domain logon user-PC
Date / time 2009-05-02 / 21:37Motherboard
CPU type Mobile DualCore Intel Pentium, 1866 MHz (14 x 133)
Card mother name Toshiba Satellite A205
Motherboard chipset Intel Crestline - GM GM965
Memory system 3061 MB (DDR2 - 667 DDR2 SDRAM)
DIMM1: Micron Tech 16HTF25664HY-667E1 2 GB DDR2 - 667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM3: Hynix HYMP112S64CP6-Y5 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
Type of Phoenix BIOS (15/05/08)Display
Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
Accelerator 3D Intel GMA X 3100
Monitor monitor generic PnP [NoDB]Multimedia
Audio adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio ControllerStorage
Controller IDE controller Intel(r) ICH8M SATA AHCI - 2829
Controller IDE Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
IDE controller Texas Instruments PCIxx12 Integrated FlashMedia Controller
Storage controller Microsoft iSCSI Initiator
Hard drive Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA)
Optical drive MAST * a DVD-RAM UJ-850 s ATA Device (DVD + R9: 4 x, DVD - R9:4 x, DVD + RW: 8 x / 8 x, DVD - RW:8 x / 6 x, DVD - RAM: 5 x, DVD - ROM: 8 x, CD:24 x / 16 x / 24 x DVD + RW/DVD-RW/DVD-RAM)
Hard disks SMART Status OKPartitions
C: (NTFS) 125915 MB (102380 MB free)
D: (NTFS) 64863 MB (12885 MB free)
Total size 186,3 (112.6 free go-go)Entry
Standard PS/2 keyboard keyboard
Alps Pointing-device mouseNetwork
Main IP 192.168.0.199
00-1B-9E-FB-8B-DF main MAC address
Atheros AR5007EG network (192.168.0.199) adapter wireless network card
Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0) network card
TOSHIBA Software Modem modemDevices
Printer Microsoft XPS Document Writer
Printer send to OneNote 2007
Controller FireWire Texas Instruments OHCI Compliant IEEE 1394 Host Controller (PHY: TI TSB41AB1/2)
USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
USB camera Chicony USB 2.0 Camera
USB device USB Composite device
Battery Microsoft AC adapt
Battery Microsoft ACPI battery compatible control methodDMI
Provider DMI BIOS TOSHIBA
DMI BIOS Version V5.60
TOSHIBA DMI system manufacturer
DMI system product Satellite A205
DMI system Version PSAE3U-08C023
DMI 68221541 K-system serial number
DMI system UUID EA88852C-3BD111DD-968C001E-EC3CB59A
DMI Motherboard manufacturer TOSHIBA
DMI Motherboard product ILHAM
DMI Motherboard Version 1.00
DMI Motherboard Serial number 0123456789AB
TOSHIBA DMI chassis manufacturer
DMI chassis Version n/a
DMI chassis serial number, no
DMI chassis asset tag *.
DMI chassis Type Notebook================================================== ================================================== ========================
Hello!
You will find hundreds of discussions here in the forum about this, if you install Windows XP and Vista from a Microsoft disc and the HARD drive can't be detected... So he s strange to read these questions again and again.
However, to install Windows, you need the SATA drivers or let's say the Intel Storage Manager package. It contains the driver you need. You can then create a new installation using nLite [www.nliteos.com]
Or look you at this Toshiba document: http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htmGood bye
-
Satellite L755D - Web cam/mic are not detected by Skype
Good evening everyone,
I just noticed that when I install and open Skype, my built-in webcam and microphone are not detected by the application. He has worked in the past, but I've not had to use Skype for more than a year, so never noticed until now.
I checked the Device Manager and there is no webcam or microphone listed. I tried to search for new hardware, but it found nothing.
Specifications of systems:
OS: Windows 8.1 Pro
Processor: AMD A8 - 3500M
Memory: 8 GB of RAM (2 x 4 GB Kingston sticks)
HARD drive: 750 GB Seagate Barracuda
The version of the BIOS: Insyde Corp. 2.10 (28/06/2012)If any other info is needed to help diagnose and solve this problem, then please ask and I will provide.
Thank you very much
Michael
I guess the laptop not was not preinstalled with Win 8.1 but updated you the Win 7 system to Win 8.1.
Is this correct?I m application because it would be interesting to know if the webcam worked correctly using Win 7.
The driver for the webcam using Win 7 to be installed to get the webcam recognised.To help to win 8.1 additional webcam driver is not necessary because it s already part of the Win 8.1 System. That is why the webcam should appear in the Device Manager without installation of the webcam driver.
However, some models of laptop supports additional webcam POWER setting in the BIOS.
Please check this option in the BIOS. -
I'm having a problem with my Macbook Pro retina end 2013 of 13 inches, processor 2.4 GHz Inter Core i5 memory 4 GB 1600 MHz DDR3 Graphics Intel Iris 1536 MB software OS X 10.9.5 (13F1603). The battery could not detected and when I run the diagnostic, the question is PPT01. When I brought to the service center, they said the logic board failed in MRI and battery failed on the MRI.
I'm looking forward to your reply if you in front of the same problem and the possible solution or the best thing to do.
Advice of logic and batteries are not self-healing properties. If you want a MBP operation, have them must be replaced.
Ciao.
-
W510 does not detect 16 GB of RAM
Hi, I bought Thinkpad W510 a month ago and then I updated memory up to 16 GB. My laptop detects only 8 GB of RAM. I tried to change the RAM, but it detects only the RAM into the slots on the keyboard. It does not detect the RAM which is at the back.
My Ram is DDR3 - 1333 - PC3 - 10600. I have 4 X 4 gigabits.
Am I missing something or I have to configure to make it happen?
Thanks for any help.
Concerning
Amit
Ok. Fixed.
Necessary for installing memory in specific order.
Open a ticket with Technical Support and they guided me to the article. I do not have the link right now as they asked for specific serial number of google.
If I can find the article, I will udpate.
Update: link to the KB - http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75886
Maybe you are looking for
-
Disable automatic update of Firefox on Gnome 3, Fedora 15
The Fedora 15, using Gnome 3, I'm unable to disable automatic updates for Firefox, I am only able to disable automatic updates for the modules and the search engines.
-
Can't see some names both in the address book.
Original title: address book I see a few names at a time, not the list goes. It shows what she calls frequent contacts, not an entire list. must continue to add names. manually instead of just the ability to scroll down the list. Whenever I send
-
Impossible to print, or do a system restore
receive error "error loading \3\LXCFtime.dll" and indicating that the specified module could not be found. Unable to print or add a printer.
-
When I run Cheyenne Bitware and click on receive to activate voicemail I get error messages "" canoe find CBFA. "." DLL"and"could not initialize modem ".
-
need to block unknown e-mail, other than those in spam
I GET SO MUCH JUNK E-MAIL. A LOT GO IN MY JUNK E-MAIL FOLDER. JUST BLOCK THE MAIL I AM NOT INTERESTED