Removal tool for infection of malicious software "SeekService Service"

I infection of dishes wrong in my computer that displays a pop-up message just after the departure to the high and other regular intervals, which says "a program or you asked to communicate with XXX and shows the 3 options to 'never ask again until you restart the computer', 'Allow', 'Disallow' where XXX goes through a sequence of names associated with the computer. , its software and the software providers Web sites, etc. of each which appears several times before stopping in the name of the next. A few random garbage like d4caa1a0d.35un names also appear in the sequence. Using MSCONFIG, I identified the dishes wrong as SeekService Service, whose details are available at http://www.threatexpert.co/report.aspx?md5=a39c21dede160cf751395e93e91b0a54, which gives details of the threat but no information about its withdrawal, I do not trust, the uninstall file that accompanies this bad dishes, it is probably just a way of multiplying more far. Where can I get a removal tool? OldZ80

Clean boot it did not stop to run? It only works with IE?

There several methods to detect above, if it loads at startup and sometimes you must run manaually
like Autoruns.

======================================

If it loads in Internet Explorer, try one of these:

Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

Close and restart IE or IE with no addons

not better?

IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.php

Startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Download Windows 7 Pro ISO, authentic, not infected by malicious software. Official. I have the product key in my laptop.

    My PC is about to fail, when can I download Windows 7 Pro ISO, authentic, not infected by malicious software. Official. I have the product key in my laptop.

    Hello

    Choose your version of bits (32-bit or 64-bit) on the link:

    Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

    http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/

    And Neosmart has instructions on how to burn ISO disk images using imgburn:

    http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

    The COA sticker is either on the underside of the laptop or in the battery compartment (you did already).

    By using the downloaded ISO file method can require the Activation of phone.

    If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

    "How to activate Windows 7 by phone '

    http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

    The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

     

    ________________________________________________

    Using the method of USB in conjunction with the Windows 7 download preceding:

    http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

    See you soon.

  • Path and a location for the file Windows Malicious Software Removal Tool for Vista 64 X

    I am trying to understand if the X 64 Malicious Software Removal Tool should be in both x 86 directory, system, system32 or SYSWOW64 in Vista Home Premium directory, SP2. It would seem logical that he would go in the second case, but I see it in the system32 directory. I want to just make sure I'm on the right pair and it is in the right directory.

    On 64-bit systems System32 is the 64-bit folder.
     
    --
    ..
    --
    "Pn" wrote in message news: e9cec52f-2d 76-40eb-be4d-7d73681e10b5...
    > I'm trying to figure out if the X 64 should Malicious Software Removal Tool
    > be in the x 86 directory, system, system32 or SYSWOW64 directory in
    > Vista Home Premium SP2. It would seem logical that he would go the
    > last but I'm the see in the system32 directory. I just want to
    > I use the right pair and it is in the right directory.
    >
     
     
  • Phone call informs me that my computer is infected with malicious software; it's from Microsoft. Is it?

    A person claiming to be from Microsoft "Windows - something or other' phones me to force me to go online to give them access." they always say they will fix the problem (whatever that is). If I don't respect, the intruder software can damage the system. They do not specify the nature of the software.

    Background noises heard during the phone call, I think it's operation "boiler room" scam with the many other appellants works in the background.
    Someone else has met such unsolicited phone call?

    Without a doubt a scam (a quick search forums answer will show several similar positions). I hope that you did not have access to your computer.

    SC Tom

  • How can I recover my return volume + / indicator bar _ force, seems, it was removed when I downloaded some malicious software

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Your computer is not clean and/or Windows is damaged. You can try a repair installation or backup your data and do a restore clean factory/install of Windows.

    Repair a Vista Installation using the Option upgrade to the Vista DVD - http://tinyurl.com/3b7yrj MS - MVP - Elephant Boy computers - Don ' t Panic!

  • How can I remove restore points created daily by Software Distribution Service 3.0?

    Are not only all these points using the space on my hard drive to restore?

    A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. You can selectively remove those created in less important moments.

    cCleaner also comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

    http://www.CCleaner.com/download

  • Endangered malicious software removal tool?

    I have downloaded and run the tool for removing malicious software on January 8 and she come clean but today I get a message that I have a malicious virus!  Why would it be?  Also today I can't locate the "Malicious Software Removal Tool" why would it?

    The malicious software removal tool (MRT) is not a substitute for an antivirus application.  When you download it, it runs once (the MRT is not active in the background or run whenever you start your computer) and then search existing infections that he recognizes and attempts to remove them.

    After you have run the MRT, you stay vulnerable to subsequent infection of malicious software, including all the MRT having withdrawn, unless you have a separate anti-virus application with a current subscription.

    A new version of the RMT, with malicious software update information is downloaded each month on "Patch Tuesday".  If you want to re-run the MRT at any time until it is downloaded again next month, locate your computer MRT.exe.  Normally, it is located in C:\Windows\system32.

    For a little more information, see http://www.wintuts.com/Windows-Malicious-Software-Removal-Tool and http://support.microsoft.com/?kbid=890830&wa=wsignin1.0

  • malicious software removal tool will not work

    I think that I've been infected by malicious software. I tried to run malware bytes, but it kept becoming extinct and then saying my I don't have ' access permissions to ' this file or the path. Then I went to microsoft and download the malicious software removal tool, but just after he started sweeping, he disappeared as well. I registered a user who belongs to the Administrators group, so I know that's not the issue. I wonder if Malware prevents programs such as these as running and remove it? If so, how to do this? Please help quickly!

    Yes, the malware can do exactly what you described: stop a program being removed from malware and it is impossible to run it again.

    The problem is probably caused by a rootkit , which is very difficult, if not impossible to remove.  Someone with lots of experience of malware removal might be able to fix it, but the only solution is to back up your data files, reformat the drive and reinstall Windows.

    I wish I could give you better news.  :-(

  • Web browser does not load after the release of the Windows Malicious Software Removal Tool (KB890830)

    My computer ran a mandatory update on 20/10/14 to install Windows Malicious Software Removal Tool for Windows 8, 8.1 and Windows Server 2012, 2012 R2 x 64 edition-October 2014 (KB890830). Since the update I can not either of my browsers to load. I'm showing a connection wi - fi and have even attached to my phone, but still not get anything to load. I'm not sure what to do to fix this problem. Any ideas on what could be the problem and how to solve?

    UPDATE: well, if this seems to be a firewall problem. When I disable my Norton firewall, my web browsers work fine. My problem now is to find out how to get this new update and firewall to play nice together. Any suggestions?

    Hi Manu,.

    Thanks for posting the request in Microsoft Community Forums. We appreciate the effort that you did and thank you for sharing the resolution.

    You can check if there are any last update available for Norton. If so, you can update and check the results. I suggest contact you also Norton support to report this conflict with the update.

    Hope this information helps. Response with status so that we can help you.

  • HP Protect tools for windows 8.1 x 64 (Probook s 4331)

    Hi support them

    I used 4331 s Probook and install windows 8.1 pro x 64,.

    I want to install hp protect the tool for fingerprints but the software doesn't appear in the list of downloads (I saw figerprint pilot only)

    Thank you

    Protect the tools for Windows 8.1 HP x 64

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5217791&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_116000_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Your laptop is listed in the compatibility list.

  • Why are there no update in September for Malicious Software Removal Tool?

    Why are there no update in September for Malicious Software Removal Tool?

    Hello

    My guess is that it is usually released the 2nd Tuesday of the month which is tomorrow 13/09/2011.

    For anyone needing a link - it is also available via Windows Update.

    Microsoft® Windows® malicious software removal tool (KB890830)
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

    Hello

    The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

    I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

    P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

    Any suggestions or ideas? We are scratching our heads on this one.

    Thank you in advance for your time and help

    Tim Kerr

    Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

    See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~

    Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Updates to Windows for the malicious software removal tool. Can I watch it install and then look at the scan

    Updates Windows 7 for malicious software removal tool. When the download of the update can I watch it install and then watching the ongoing comprehensive analysis

    Thank you for Pingu70

  • After installing Windows Update for Malicious Software Removal Tool, continue to see the same update offered

    downloading of files from the internet, but does not install. Why?
    * original title - badly installed. version of software on my pc removal tool is October 2010. I want to update that from windows update

    Hi Joe_590,

    See the article following some possible troubleshooting:

    http://support.Microsoft.com/kb/910339

    I hope this helps!

  • Question about the Microsoft malicious software removal tool

    Recently, I downloaded and executed the MS Malicious Software Removal Tool. He said that if it finds any infected file he would remove the. I did 2 quick scans, and twice he told them I had 3 infected files, but at the end of the scan it says no malicious software found. Anyone know anything about this?

    Hi Flamencoqueen,

    Please use the Forum for answers!

    Different security programs have different detection evaluates, performance etc.  It could be that when scanning infected files were found and removed. If you have reason to believe that the result cannot be specific, you can choose to run that more than one antivirus program on a particular system provided that they are not in conflict with one another.

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

Maybe you are looking for

  • I can't access all the sites on my PC

    Since 3 days when I tryto get on facebook or youtube or any other site, I get "unable to connect safe" I don't know what to do please help!

  • Virus detected

    Apparently, my computer has been infected with tapsnake, which is the best antivirus I could install? Told me about Onyx, but I can't seem to implement because it does not open because it was downloaded from the internet! This does not mean a lot to

  • Media player for PlayBook

    Download Windows Media Player for my PlayBook?  If so, which version to download?  I consider my security cameras on my laptop with WMP and now I want to see also form a PlayBook.

  • ' error no 80070641' and ' error 80070103 no '

    What do these error numbers mean? When I go to install updates they fail and these errors come upward.

  • Connect to the printer

    I have problems with my new router to internet provider giving the printer the correct ssid, my staes status of network through my network config page it is in offline mode. Where and how can I get it online and be able to enter the correct ssid and