Question of P500 with 2nd external display via displayport

Similar Questions

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• kernel_task runaway (from 300 to 600%) CPU with 2 external displays

  I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

  Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

  Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

  Any ideas on how to fix this resumption of kernel_task of all my CPU?

  I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-25 14:24:02

  Download EtreCheck from https://etrecheck.com

  Time 07:59

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Hardware Information: ⓘ

  MacBook Pro (retina, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 242

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Color LCD 3840 x 2400

  LED Cinema Display 2560 x 1440

  Thunderbolt Display 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

  Disc information: ⓘ

  APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Boromir (disk1) /: 499,05 (Go 140,24 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: ⓘ

  / etc/sudoers, 2299 but file size expected 1563

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Beats Updater.app

  com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

  /Applications/proxifier.app

  [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

  / System/Library/Extensions

  [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

  Startup items: ⓘ

  TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 156 jobs

  [running] Apple 108 jobs

  Launch system demons: ⓘ

  [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

  [no charge] 41 tasks of Apple

  [loading] 153 jobs Apple

  tasks of Apple 109 [performance]

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

  [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

  com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

  com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

  com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

  [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

  User launch officers: ⓘ

  com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

  com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  HWMonitor Application (/ Applications/HWMonitor.app)

  Hidden CPULed Application (/ Applications/CPULed.app)

  Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

  Beats Updater Application (/ Applications/bat Updater.app)

  Hidden NET Monitor Application (/ Applications/Net Monitor.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

  User Plug-ins internet: ⓘ

  WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

  Safari extensions: ⓘ

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

  3rd party preference panes: ⓘ

  Backblaze backup (2016-07-11) [Support]

  Flash Player (2016-08-29) [Support]

  FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

  Java (2016-08-18) [Support]

  MagicPrefs (2016-01-20) [Support]

  MenuMeters (2014-10-22) [Support]

  TiVo Desktop (2009-11-23) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Boromir: Disc size: 499,05 GB disc used: 358,81 GB

  Destinations:

  Frodo Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 09/09/16, 02:09

  Last backup: 25/09/16, 11:49

  Backup disk size: too small

  Backup size GB 999,86 < (disc 358,81 GB X 3)

  Top of page process CPU: ⓘ

  345% kernel_task

  56% Information System

  44% cloudphotosd

  42% iTunesCacheExtension

  30% activity monitor

  Top of page process of memory: ⓘ

  1.44 GB kernel_task

  1.18 GB com.apple.WebKit.WebContent (6)

  786 MB mds_stores

  590 MB bztransmit

  Mdworker (18) 492 MB

  Virtual memory information: ⓘ

  256 MB of free RAM

  4 pm used GB RAM (5.96 GB being cached)

  768 KB used Swap

  Diagnostic information: ⓘ

  25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

  /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

  25 sep, 2016, 13:06:44 test - passed

  September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

  com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

  Start safe mode, use this way and see if the problem is recurring

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• Start with an external display in VISTA with an HP dv2000 laptop

  Hello

  My HP laptop screen is broken, so I need to use an external monitor. Unfortunately, the screen not active really up to what I'm going to connect to the page into account. This means that if I want to access bios, upgrade to a new operating system, or to do other things, I'm completely blind.

  Is it possible that I can get the operating system to start with my external monitor.

  Please note: I have a strong experience of PC and I'm decent to things like the change of systems. So feel free to suggest something dangerous or risky.

  -Hamed

  Unfortunately, what you want to do is not possible.  The system should be launched before the second monitor is enabled (and you can't have the main monitor an external monitor on a laptop).  If you want to see what you do with stains where the disk hard operating system is not in use, you have no other choice than to repair your laptop screen (it does not cost much more and if you get only one monitor (and not the entire upper eyelid) you can replace exactly that and it shouldn't cost as much as a whole new lid (assuming it's the monitor that is the problem and not) (not something in the lid) anywhere near).  I did myself on my Dell and it wasn't easy by any means and I had to use tiny tools, I had not used in years (and if ever I need to do it again, I could just let a technician computer repair or Dell even myself worth) - but it can be done.

  There is no way to say BIOS (or something else) to use the external monitor as primary monitor - the controls are not there, and even if they were, the connections would be not activated by the system (and you cannot do it from the BiOS unless / until the system works).  You might be able to do the main monitor once the system is working, but not until then.  I appreciate your computer experience and a willingness to try something dangerous or risky, but it is not a question of who - it is just possible iisn can't with any Windows OS I know and probably other software of OS as well (and I'm not sure I would even suggest something dangerous - perhaps risky - even if I knew it would work because I'm tryng to help solve the problems and not cause) new or worse those).

  I would just bite the bullet and contact HP and get the laptopr fixed or at least get the part and try to do it yourself (a bit risky, difficult, time consuming and who need very small tools to accomplish if this can be done on a HP as it did on my Dell - you need HP technical support or parts if it is possible and that the difference in cost to ensure that it is possible) and useful effort).

  I'm sorry if this isn't what you wanted to hear, but it's like that.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Try to use the capabilities of the Web from TOSHIBA camera with an external device via the USB port.

  Toshiba Web Camera software that came with my new Qosmio X 505 - Q880 is very useful, and I would use it to take pictures with an external camera connected by a USB cable (camera is a Kodak DC290, in case this is useful).  Is it possible to use the webcam with anything other than Toshiba built in webcam?  Now that I'm typing this, it seems a question more appropriate for the Toshiba site, but I guess I'll try here first.

  Toshiba Software is for Toshiba hardware.

  Go to the Kodak Web site and are looking for software for your Kodak camera.

  Or as you say, ask Toshiba.

  See you soon.

  Mick Murphy - Microsoft partner

• Start with an external display Vista on HP laptop

  Hello

  My HP laptop screen is broken, so I need to use an external monitor. Unfortunately, the screen not active really up to what I'm going to connect to the page into account. This means that if I want to access bios, upgrade to a new operating system, or to do other things, I'm completely blind.

  Is it possible that I can get the operating system to start with my external monitor.

  Please note: I have a strong experience of PC and I'm decent to things like the change of systems. So feel free to suggest something dangerous or risky.

  -Hamed

  Hi hamednilforoshan,

  See the following article useful information and some troubleshooting:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• sierraOS performance issue with 2 external displays

  I have a mid 2013 15 inch rmbp with an i7 2.4 ghz and 650 m from nvidia. I've always used my mac connected to 2 external monitors and everything was always fine. Fans occasionally happen as expected for more demanding applications. Since the installation of sierra fans will be shut off for something else then inactive. Tab 1 safari open is enough to make it go. It's pretty boring, so I'm just looking at a few Web pages. Everyone knows this? all the patches? I have not changed the settings or run everything I don't have not primarily just installed the update.

  Solve this takes some exploring with the activity monitor. Users are generally something that was delayed from their previous configuration is hogging the CPU or memory, or badly behaving badly, to cause such problems. It is usually not MacOS itself that is the question.

• macOS Sierra with three external displays on a MBPr

  In the last three versions of Mac OS x, I was able to connect two monitors to separate ports thunderbolt and a third monitor to the HDMI (last MBPr) port using all four screens (the retina display is the 4th).  After the installation of Sierra this hardware configuration blocks the computer (complete gel to the top, have the power with the power button on the keyboard).

  Any thoughts on how to fix cela or seems to be just a bug in the first version of Mac OS?

  Hey there BeeeLock,

  I understand that your configuration of your external monitors may cause a few problems after your update for Sierra. To reset your NVRAM memory, that can help you resolve this problem, follow these steps:
  

  How to reset the NVRAM on your Mac - Apple Support

  Thank you for coming to Apple Support communities!

  Kind regards.

• iMac 5K (2016) will not all wake up with connected external display

  I have an iMac 27 "5K nine. My first Mac from Windows - it was a world of frustration and then most of the things I re-learned or found of alternatives for, I have a major problem of the iMac not wake from sleep. It took days to change things and we cut the field down to discover is an external monitor at the origin of the problem.

  I have a LG 23MP75 IPS monitor hooked up to 90 degrees. This is a debugging, screen bash and the cat. So I develop sites on the main iMac screen in the Sublime editor and also check the sites in the browser, and then on the external I Inspector chrome, terminal and Skype/cat stuff. When the device is connected, it works well, no problems. If she goes to sleep for a short period of time like 30 minutes or less, he wakes up. If he goes into a deep sleep (hibernation?), he don't wake. Sometimes holding the key ctrl + p + r, cmd and press work but mostly not, usually I have to pull on the power cord! for a restart. Heart-wrenching. The only solution at the present time it unplug the HDMI until I go home every day.

  The external monitor is connected through a HDMI cable that is routed into an 'active' HDMI mini-Display port adapter. I was told that the adapter is active is important after I had one active and bought assets to try to solve this problem. I read that the removal of the hibernation file may contribute to allow OS x to replace but I opened it instead and it is empty so not corrupt (sudo rm/var/vm/drag).

  If I stop and restart, the login screen is badly laid out, it has mirrored screen not extended display which is how it is implemented. See the images to compare. This makes me wonder if part of the problem is OSX being unhappy with the configuration of the monitor outside being connected?

  

  

  Here is the screen set up the config so you can see that there is nothing out of the ordinary:

  

  

  There is no strange configuration, the machine was brand new from Apple themselves, by default on the box, no restoration or something like that as I'm new to Mac.

  Can anyone offer any suggestions to fix the problem so I didn't either unplug the cable or the stop (which brings me to see the connection in horrible mirror every morning)? Any help would be greatly appreciated.

  You have 90 days of free telephone support, AppleCare, called Apple to discuss and see what solution they have? If you weren't aware that you had 90 days of support AppleCare please click on http://www.apple.com/support/complimentary/. In addition, if you haven't already, I highly recommend buying AppleCare, that extend the warranty to 3 years and 3 years of phone to provide support. If your machine ever needs repair (lets hope he never does) AppleCare pays for itself almost always on the first incident.

• External display via mini display port resolution

  Hello

  I have an iMac 27 "late 2009 with a graphic of ATI Radeon HD 4670 256 MB and the latest Mac OS.

  I just bought a Samsung U28E850R to use as a second screen UHD and connected via the port mini screen iMac to display the port of the Samsung.

  The problem is that it is not possible to set a higher resolution than Full HD on the Samsung. But with regard to the iMac specification 2560 x 1440 should be possible.

  Does anyone know the solution for my problem? Thank you.

  Hello there, riedma.

  It seems that you are wanting to be able to choose from all available on your new display resolutions. The following Knowledge Base article offers strong information to achieve this:

  OS X El Capitan: set the resolution of your screen

  Screen resolution determines the size of the text and objects on your screen. By default, the resolution of your screen is set to display the text stronger and more detailed images. So it is best to use the default resolver, you can manually set the resolution to make the text and objects appear larger on your screen, or adjust it to make the text and objects appear smaller in order to have more space on your screen.

  Depending on how you set the resolution, some applications may not entirely correspond to the screen. Using a scale of resolution can affect performance.

  Define the main screen resolution

  1. Choose the Apple menu > System Preferences, click view, and then click display.

  2. Select chipped, then select one of the options of resolution nationally.

  Define a connected screen resolution

  If you have more than one display, additional resolution options are available.

  1. After that the display is connected, choose Apple menu > System Preferences, click view, and then click display.

  2. Press the Option key while you click chipped to see additional resolutions for the second screen. Then select a resolution option to scale to the second screen.

  If you changed your screen resolution and now there is no picture

  Connect multiple monitors to your Mac

  Set of accessibility options

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Question of P500 with Ubuntu

  Hello! First post since I'm confused ridicilously.

  I try to install Ubuntu 14.04 on the Thinkstation P500.

  He has completed the installation successfully and gets to the login screen of GUI with success as well.

  But when I try and connection, it is actually not in the operating system. It is like its about to open a session, but then it just boot back me to the login screen.

  Has anyone else had this problem before? If so, what would you do to fix?

  Thank you!

  http://support.Lenovo.com/us/en/products/workstations/ThinkStation-p-series-workstations/thinkstatio...

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• Broken screen, external display mode standby with Satellite A10 S203

  Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?

  Hello

  I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.

• Portege M700-130 + Portreplicator + external display

  Hello

  We have a Portege M700-130 with the PA3508E-1PRP portreplicator and have a problem with the external display (monitor) connected to the portreplicator.
  The OS is Vista Business. The external monitor is an EIZO S2401WE-GY.

  Now the question:
  * Can you just place your Portege in the portreplicator, start it with the key to the portreplicator and get an image on the external monitor to the connection of the operating system image without doing anything on your laptop? *
  It would already help us if someone with the Portege even and a portreplicator can give us his experience about it.

  Because we can't, but we have absolut want to achieve or better should. We have tested all the settings in the power and hardware configuration options. The point is: when the Portege gets started without portreplicator and is remplace replaced offshore in the portreplicator, then began with the portreplicator the external monitor goes black when loading of the connection of the operating system image. Only after that the laptop screen is fliped open, we get an image on the external monitor.

  Help or an answer, I'd be very appreciated. Thanks in advance!

  Hello

  One of my friends has tested this on the Portege M700 Vista OS.
  It connected the external monitor using a VGA (analog) and DVI port.

  It seems that it works as you suggest in your ad.
  The Portege lid is closed and connected to the external monitor.
  You do not need to touch the Portege M700. He should start by pressing the key of the duplicator.

  Welcome them