Remove a single comment on save

Similar Questions

• Deleting several comments - "remove highlights and comments" grayed

  Using numbers 3.6.1 on a MacBook Pro (13 "retina, end of 2013).

  I want to delete all comments on hundreds of cells at a time (between cells with comments are a few without) without affecting the contents of cells - to do this, the command "remove highlights and comments" seems ideal... but he is always greyed out, apparently no matter what I do. The only way I found to delete a comment is to use the button Delete for this purpose within the window of comment... which is closed, leaving no cells selected, so I repeatedly to select the next cell with the mouse, renavigate to the key, press on and... wait.

  I looked in the 'Help', searched the web, this database too and found nothing useful. Now, maybe I forget something, maybe because I've been using numbers and its predecessors, as well as Excel under Windows (and Lotus 1-2-3 before DOS), for decades something obvious is looking at me in the face... be it, hope for your help!

  Hi the Seagull,

  A similar question was recently published here.

  See the post of Jacques Rioux (and comment followed by SGIII) in this thread.

  Kind regards

  Barry

• How can I remove a single file from a folder of bookmarks

  How can I remove a single file from a folder of bookmarks

  Drag the bookmark you want to delete to the left. A red button that says delete. Press the key and he went.

• PowerCLI Remove-NetworkAdapter questions - need to remove the single card

  I need to remove a single adapter via PowerCLI:

  "Get-NetworkAdapter - VM myvm" returns:

  Name Type NetworkName MacAddress WakeOnLan
  Activated
  ----                 ----       -----------  ----------         ---------
  Network adapter 1 e1000 VM Network 00:50:56:09:09:09 False
  Network adapter 2 e1000 VM Network 00:50:56:01:08:07 False

  I want to only remove the NIC 2, so I tried:

  "Remove-NetworkAdapter - networkadapter"Network adapter 2"which returns:

  Remove-NetworkAdapter: cannot bind parameter "NetworkAdapter". Could not be converted
  the value of 'Network adapter 2' to type 'System.String' to type 'VMware.VimAutoma '.
  tion.ViCore.Types.V1.VirtualDevice.NetworkAdapter ".
  On line: 1 char: 38
  + delete-NIC - NIC < < < < '2 network adapter.
  + CategoryInfo: InvalidArgument: (:)) [delete-NetworkAdapter], Pa)
  rameterBindingException
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat
  ion.ViCore.Cmdlets.Commands.RemoveNetworkAdapter

  So I tried:

  $network = get-networkadapter VM - myvm

  Remove-NIC - NIC $network

  Who wants to delete the two network adapters:

  Confirm
  Are you sure you want to perform this action?
  Operation 'Remove network adapter' target 'NIC 1,
  NIC 2 ".

  So I tried

  $network = get-networkadapter VM - myvm

  Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [2]

  Which returns:

  Cannot perform indexing in a null table.
  At line: 1 char: 63
  + delete-networkadapter networkadapter - $network.networkadapter [< < < < 2]
  + CategoryInfo: InvalidOperation: (2:Int32)], RuntimeException
  + FullyQualifiedErrorId: NullArray

  So, what don't get me?  I need to remove the 2 network adapter only.

  Any help would be greatly appreciated.

  -stephen

  You can do

  Get-NetworkAdapter VM - myvm | where {$_.} Name - eq 'Network adapter 2'} | Remove-NIC

  Note that a table of PS starts indexing at 0.

  If your last attempt should be

  $network = get-networkadapter VM - myvm

  Remove-NetworkAdapter NetworkAdapter - $network.networkadapter [1]

• Remove the delicious Sidebar and save icon

  After my upgrade to FF30 yesterday (it was also a nightmare), FF open with a delicious sidebar and it also put an icon 'save' to the right of my search bar.

  I have no bloody idea whence they came, I do not use Delicious, do not have over the years.

  Before FF30, none of them anywhere to be found.

  How can I remove them?

  Is not a toolbar of Delicious, I repeat, is not a toolbar which can be removed via Add/Remove Windows, nor do I have any of the delicious module.

  I've seen these instructions, they are not relevant.

  I don't have automatic updates to any software, even Windows updates not, I run Firefox in Sandboxie with some permissions, this has not got by me or Sandboxie, it appeared as if by magic with FF30 somehow.

  Where did this side bar and the icon come from?

  If it is a new combination of Firefox-Delicious, she, like everything else since FF20 +, is a hunting witch who becomes tedious.

  Can someone point me to a solution please?

  Thank you, in advance.

  Close, get you me on the right track, however.

  It is listed as a "service" under modules, now deleted, problem solved.

  I have no idea how it got there.

  Thank you...

• Remove password from comments?

  How to remove the password of comments. When I'm in the main user account, it won't let me. I can turn off and change the photo only. When I am connected to the guest account I see where change/remove, but it says: "Windows cannot delete.

  Thank you, Tiffany

  Windows 7 love until now. :)

  Do not use the guest account, you see in the user accounts applet in Control Panel. The guest account is a special system account, not one for when you feel hospital. For some reason, it is disabled by default in Windows XP, Vista, Windows 7, Linux, Unix and OS X.

  On TechNet:

  "The guest account is intended for users who need temporary access to the system. However, if this account is activated, a security risk may exist because an unauthorized user could have anonymous access to the system through this account. »

  http://TechNet.Microsoft.com/en-us/library/bb418978 (TechNet.10) .aspx

  So if you have enabled comments, turn it off now and create a standard/Limited (Vista, Windows 7, XP Professional/XP Home) for your visitors. Call the new user account to something like "visitor".

  http://www.recipester.org/recipe:Enable_or_Disable_Windows_7_Guest_Account_26426027

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista and Windows 7 are OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• Help with a Script to remove the additional paths and save

  Here are a few scripts that I have at the moment, but none work. With the first script, I get an error with the 'indexOf', and with the second script, it keeps only the second name listed in the string. How can I get either of these to work where I can remove all the paths, with the exception of multiple ones I want to keep?

  function deletepaths()
  {
    if (!documents.length) return false;
  
  
    var doc = activeDocument;
    var save = ["Ex1", "Ex2", "Ex3"];
  
  
    for (var x = 0; x < doc.pathItems.length; x++)
    {
      if (save.indexOf(doc.pathItems[x].name) == -1))
      {
        doc.pathItems[x].remove();
      }
    }
  }
  deletepaths();
  

  deletepaths();
  function deletepaths(){
  if(!documents.length) return;
  var doc = activeDocument;
  for(var a = doc.pathItems.length-1;a>-1;a--){
  if(doc.pathItems[a].name != ("ex1", "Ex2")) 
       doc.pathItems[a].remove();
    }
  }
  

  IndexOf does not work with extension script. Most likely, you would need a number if statement for many golds ' | ', or a loop in the loop goes well your path names.

• How to remove a bad open and save a file structured fm in unstructured mode?

  I open a file structured fm wrongly structured and backup mode. When I open this file again fm in structured mode, the display of the structure was empty. Everyone is not how to remove it?

  Dragon,

  To expand a bit on what said Alex and Russ, whenever you delete the contents of a FrameMaker document and record the result, the deleted content is missing. It doesn't matter if deleted content is the hierarchy of elements or text and graphics in the document. A recent backup, if a version of the file that you have explicitly recorded or created by automatic backup of FrameMaker,

  Alex has mentioned that a conversion table might help to recreate the structure of the element of the document. His comment assumed that a conversion table has been used somewhere in the history of this document. If this is the case, you can create a new conversion table specifically for this document. If you have not yet looked at conversion tables, a conversion table is a FrameMaker table that explains how to use markup in an informal document to create a structured document equivalent. How successfully she creates the desired structure depends strongly on the nature of the tags used in the informal document and the structure of the item you want.

  -Lynne

• Replace or remove all single line breaks in a Blob

  Hello
  
  I want to remove/replace all new simple lines (NOT the carriage return / new line) in a BLOB.
  
  I tried to convert the BLOB in a clob, and then replace all occurrences of new lines of simple with the function replace (for example replace (clob, 10),)
  I even cut the clob into small pieces of varchar2 and tried to apply the function replace etc., but without success!
  
  I'd be happy if someone could give me a tip how I could fix this problem.
  
  I use
  Request 4.1.0.00.32 Express on
  Oracle 10g (10.2.0.4.0 - 64 bit)
  
  Thank you
  Johnny

  Johnny Be Good wrote:
  Hi Paul,.

  the answer to your first question is simple. I use a blob instead of a clob object because I download a file (csv) using an element "Browse file".
  The file is then stored in FLOWS_FILES. WWV_FLOW_FILE_OBJECTS$ (wwv_flow_files) that stores the file in a blob (blob_content) column.

  What to do now is to store the contents of the BLOB to a file in a directory in order to to use as an external file.
  After this, I question the external file and merge the contents into a normal table within the database.

  The problem I have now is that sometimes downloaded csv files have 'broken data sets' in the way that a line (a single dataset), which was divided into
  two or more rows (with a single line break at the end of each line instead of a carriagereturn/linefeed to the normal lines).
  Sometimes, when the lines matching/data sets contain a very large text (e.g. 3000 characters) in a single column and MS excel (the tool used to record the original excel in csv file) can not handle this long texts of a column and breaks the content of a line into multiple lines in a cell.

  However, I need to "Break" the broken data sets in the blob downloaded by removing (or replace) single line breaks, which are an indication of a split data set.

  In view of this process. I converted to CLOB BLOB when the file is extracted from APEX_APPLICATION_FILES, remove the EPA of the problem, and then write in the file system as a CLOB.

  I tried to do by converting the BLOB in a clob, for example with this function:

  A function like this is reinventing the wheel. 10g comes with dbms_lob.convertToClob (see above).

  And after conversion, trying to replace all the occurrences of single line within this clob breaks, for example with this code:

  l_clob := replaceClob(l_clob,chr(10),' ');
  

  Who will replace all the LFs, whether or not they are in CR/LF pairs. Use regexp_replace/regular expressions to exclude EPA following a CR (see above).

  "Without success" means, that the line breaks have not been replaced. I tried several ways as delete (replace without a third parameter and the corresponding function), replacement (for example with a white) etc. !

  I even tried to apply the function of standard replacement for varchars on a clob that I read somewhere that it is supported in 10g and apex 4.1 but with the same result.

  I think that you have been making life difficult for yourself. Everything that seems to involve more (ineffective) writing code as necessary. Everything you need is built into 10g (it seems that you could use the obsolete references?)

  I hope I could explain the question a bit better now and would appreciate it if you had a starting point for me.

  Should have what you need in the above examples.

• Regular expression to remove a single carriage return character

  Hi all
  
  What is the regular expression to remove only one character to return to a text string. I have something like this:
  
  1
  
  (two returns)
  
  2
  
  and I want to delete only one of the characters turn it over so I'll go
  
  1
  2 (one after the other
  
  I know / r but ot deletes all of the text string.
  
  Thanks a lot for any help
  

  Try something like:
  (in my message window):
  s = "a" & RETURN & RETURN & "two".
  placed s
  l = [s]
  put re_replace (l, "(?)")<=\r)\r", "g",="">
  Place the [1]
  (exit):
  -"a".

  two ".
  -1
  -"a".
  two ".

  I don't know how effective the situation described above could be for research, but
  You can also try:
  put re_replace (l, "\r\r", "g", RETURN)
  or:
  put re_replace (l, "\r{2"}, "g", RETURN)
  However, these last 2 only work in the situation where there
  exactly 2 returns you want to replace with a single DECLARATION - the first
  replaces any number of multiple returns with one RETURN

  It is possibly more effective than the first - it will replace again
  all multiple with a single; but it will unnecessarily replace one
  RETURN character with one character in RETURN - but I'm not a regular expression
  Expert:
  put re_replace (l, "\r+", "g", RETURN)

• "What is the difference between"Delete"&amp;"Forget this site"when to remove a single item in the 'history' as a 'customization' procedure?" c "

  I am still using Firefox on Windows XP

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• How to remove a single digit on a call?

  I used the automated answering service of the Halifax Bank on my iPhone 6 s more. Everything by entering my account number I entered an incorrect digit, but I couldn't see any icon 'remove '. I know that there is a delete button while you are entered in the phone number you are calling, but not during the call. Can anyone help please?

  There is no possible deletion on any menu interactive phone. The computer at the other end has already received (and processed) the numbers you have dialed. There is not way of recalling / deletion of one dialed number (other than the menu navigation).

• How can I remove Age of Empires 3 save files?

  I'm trying to remove the old parts saved AoE3 and AoE3 - warlords, as my computer is running out of space. May not know how this - someone can help me?

  You did not provide the version of Windows. However, you can have a look at C:\Users or C:\Documents and Settings files
  The following link can help you free up disk space:
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• How to remove a single color background?

  I have some text on white background and want to make the background transparent so that I can put the text on another image. Not sure how this is done. Any help?

  You can try to use the tracking tool to remove the white.