set up printer in project mode

Similar Questions

• How can I set up my printer color Laserjet 1600 in "project mode" to save toner?

  HP Color Laserjet 1600.  An article in the New York Times today business section suggests that I put my printer in "project mode" to save on the use of toner.  How can I do this?

  The project is in an unexpected place: right click on the Color Laserjet 1600, printing preferences, and then click the finishing tab and put under print quality.

  

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• Cannot set the default printer to landscape mode

  I have Windows 7. I want to set the printer, so it displays default landscape of Notepad. I've tried three different printers and nothing. I go to the windows printer properties and set them in landscape mode.  There are two places to change, a Preferences tab and a default Advanced tab and I did both. When I print from Notepad they always print portrait. In Notepad, I can make them print landscape, but I have to change it every time. So, I want the default to be the landscape. How to make default in mode landscape.

  Lee

  My client found their solution. You had to install an older version of the drivers and then the printer would stay in landscape mode.

• Set up my printer color laserjet to print in draft mode 100 or faster?

  Hello

  How do I set my color laserjet MFP M175nw 100 to print in draft mode, or lower quality, so it can print faster?

  Thank you!

  Hi csweeetie,

  You can choose printing in levels of gray option to print color in black and gray. This option allows to print color photocopy or fax documents. You can also use this option to print copies of the draft or to save the color toner.

  -Source and detailed instructions: LASERJET PRO 100 COLOR MFP M175 User Guide Page 103

  I hope that answers your request.

• Try to change the setting for my printer so I can print the project

  my printer is Canon ip4000 and I used to be able to put the printer in draft mode when I tried a test print.  A separate window popped up in the printer settings

  Saving photo paper good if etc. positioning is not correct.

  It was beautiful in 3 elements but having "improved" 8 now cannot find any where that I can do.

  I'm missing something.

  Thank you

  on Snow leopard on MacbookPro 17 "500 GB with 4 GB of Ram

  Right. As I said in my first post, you need to click on the arrow to the right of the name of the printer to decompress. However, the exclamation point next to the name in your screenshot indicates that something is wrong - you have installed the correct driver?

• Can not set the print properties

  Just loaded FireFox 4.0.1
  When I click on
  file
  print
  and the print window opens if I click
  Properties to define the quality or black etc. only I get
  an error box that says:
  Error
  Prop Res DLL not loaded

  I tried exactly the same thing using Windows internet explore and the Word for windows, and these all are working
  perfectly. I can click Properties in the print window and
  the value of what I want on my printer.

  I rebooted and no help.

  I'm about to go back to the previous version of Firefox
  Since I print a lot of websites and I often
  you want to set the print mode project to save time and ink.

  Can you offer any suggestions other than coming back
  the earlier version?
  Thank you!
  KyDan
  Louisville KY

  This seems to be a problem for a long time with the Lexmark printers who has just started to happen in Firefox 4.

  An example
  
  http://forums.techarena.in/MS-Office-support/596409.htm

  This Google search.

  Check out this thread for support for a solution that has worked in 2006 for a similar problem with another Lexmark printer. I hope that something like this will work for you.

• HP 4520: hp 4520 do not print in draft mode on my mac os 10.9

  Using mac OS 10.9 Maverick, my draft mode printing does not work, all the prints are full on black background instead (which is a lot of ink used).   I followed all the posts on this subject so far and none has solved the problem.  I have the latest software and printer drivers, and I wonder if it is can be corrected or a lost cause?

  Thank you very much for the help, but it still does not work properly.  The project option is available as before, but the printer continues to print in normal mode, when I chose the mode of economy.

  I would say that my computer is an iMac 2009 with a BONE that has been improved over the years and was the largest machine with no problems, so I should not complain about a little thing like that... but thanks anyway!

• Photosmart 7520: Set 2520 printer to exit ramp when not in service

  How do you set the printer to sleep when not in use?

  Listed preferences show no energy saving Mode!  Should I get a 'patch' of HP?  I had to get one for the other day installation.  Thanks for help.

• Problem setting up printer on XP via WAN for 64 bit Vista machine. __

  I have a desktop computer XP with a HP Laserjet P1006 and a Canon MP 780 multifn connected by usb printers ink jet.

  I have a vista 64 laptop I set to print on both printers via WAN (to aid adding printers and worked without any problems).

  I recently moved and when I brought back online network, the HP printer works well, but I can't print in the Canon.

  I uninstalled the Canon software and reinstalled. I connected Canon printer to Vista computer in local mode and it prints fine.

  When I try to configure Canon printer in network mode, I click on "Add a printer" on the Vista computer, I am able to 'see' the Canon printer on my desktop and "select." I get the message: "the server for Canon printer does not have the printer driver installed" and request the INF file for the printer, vista computer can not find the Canon for disc or download the driver for Canon printer (64-bit version of Vista).

  It seems to me that if I can print in local mode on Vista computer, that the correct drivers need to be installed, and because I can print on the HP printer on the Wan that the network configuration is correct, I so need to understand what the origin of the problem.

  Hi quilter48,

  In Vista computer, change the following settings and check if it helps:

  on the computer that is running a 64-bit version of Windows, click Start, point to settings and then click Printers and faxes.

  b. double-click Add printer.

  c. click Next.

  d. click local printer, clear automatically detect it and install the checkbox and then click Next.

  e. click on create a new port and then click Local Port next to Type of Port.

  f. in the Port name dialog box, type the path of the printer by using the following syntax:

  \\Computer name\printer name

  g. click Next.

  h. on the page to install the printer software, click the appropriate manufacturer column manufacturer, click on the name of a printer that supports the same printer as your printer emulation, click Next and then click Finish.

  You can see the following article for more information:

  How to find a printer driver compatible to a computer that is running a 64-bit version of Windows

  http://support.Microsoft.com/kb/895612

  Also check out the following link:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or same prelif

  I try to print 4 x 6 photos.  How to print borderless on LR5 with my HP OfficeJet 7410?  Even in print in LR5 mode, my photographs show a border.  Setup page displays "without borders".  Image settings show "zoom to fill". But cannot print, or even listen to excerpts, without borders.

  What is your size of cell on in the print module? Cell size sliders must be completely to the right, and the margins should be set to 0.

• Flag: Can I configure printer 5532 want to print in draft mode

  I have a printer 5532 Envy which is used by an Apple MacBook 2.0, HP DV 6500 and several mobile devices.  To save on printer ink, I thought printing in draft mode called for me.  As far as I know, there's no option to make the printing quality does change on a print screen.  Draft Mode is available for the 5532 desire and if so, how do I change?

  Aardvark1,

  Thank you for responding.  I thought my question would have got lost

  Re: What version of OS X is on your Mac Book? You can find instructions for printing in draft mode:

  My MacBook 2.1 uses OS X 10.6.8.  FYI, I also use a HP Pavilion dv 6500 with Windows 7.

  Please provide the information as my iPad cannot use draft mode, but I read the links you provided on HP ePrint. to see if it will work with the iPad

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• print in portrait mode

  I try to print in portrait mode, but for some reason I can't

  Here is my code:

  Here is the code:

• print in draft mode

  I have a printer Kodak ESP 7 I'm running in Windows XP, in mode rough it will print the first page ok then he follows with two blank pages then it print the 2nd page but it will start with about 1/4 down on the page and finish on the next page and then two or three more pages before it prints the page next then more blanks ect. All other printing works fine when I try to print in draft mode.  the files are .tif

  You download Kodak software on the site of Kodak to once and use the same copy to install on all your computers?

  If Yes, then I suggest following the steps in One Article using a freshly downloaded copy.  Temporarily disable your antivirus for download application and saving it.

  If not, or if the installation of a freshly downloaded software Kodak copy does not help, then the only other thing I can think is that Kodak has presented a problem in this version of his software.  If you have an older version (for example, one supplied with the printer), use the steps 1 to 4 of Article to remove the existing software and then install the old version.  Or maybe you can persuade Kodak to provide you with an older version.

  Note that whenever reinstalling the printer software, you MUST follow step 4 of the Article first (or use the equivalent registry change procedure) or you will probably fail to install the new printer driver, possibly corrupt, pilot and finish by using the former.

  At this point, it doesn't seem likely that your problem is related to Windows, because it happens on a Win XP machine and on 2 Vista machines.