Remove an iPad I bought legally MDM profile

Similar Questions

• How to remove an iPad I have more (sold) find my iPhone once I restored it. New owner must enter my username and password to activate.

  I sold my iPad after I restored it, but I forgot to remove it to find my iPhone, so the person who bought it called me and said that he could not operate the device as he asked my user name and password.

  I looked the problem and tried to follow the instructions, but there is no button ' delete account ' as shown in the following image.

  

  Perhaps because the device was online 43 minutes ago just before I restored it? Should I wait longer?

  I tried pressing 'Clear iPad' for the device, but even if the device was on and connected to the Wifi while in the Setup menu, I don't always have the ability to remove the device from the account, and he said "delete pending".

  How can I fix this without physically entering the user name and password on this device?

  You cannot remove it until it is cleared.

  iCloud: remove your device, Find My iPhone

• Lost or stolen IPAD, I bought today

  Hello all n thank you for your time. bought an IPad from a flea market to set up my Act of iTunes. To post a link iPad for he told me to do a restore. After that, I tried to put in place now, saying that he was bound to find my phone. so my? is - how can I find owner? check and see if it has been lost or stolen. Or I hope that he or she has forgotten to Eraser their info. lol so much for a great buy. Not how I wanted to have my first experience with my first Apple product to go... Thanks again

  It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund, if you can, or take it to an Apple store for an Exchange, I hope they will help you.

  Find my iPhone Activation Lock

  Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.

• remove an Ipad for my Apple ID

  Recently, I gave my old Ipad to school after buying a new impressive IPad Pro. I thought I had completely reset the old, all cleaned off, but apparently not. The new owner is my notifications, maybe because both are still tied to my Apple ID, as well as my IPhone. How can they clean my info completely, without removing all data from my new camera? They are 200 miles and have not found a way by experimenting and by following the tips, they found on the web. The student and I will be very grateful for any advice anyone has to offer.

  Thank you!!

  Prepare your device for sale or to give

  Proceed as slowly, leaving a full step before trying

  the next step in the order listed.

• Remove blocker iPad

  I have visited the Genius Bar today to solve a problem with Safari. The tech found and removed two ad blocker apps, which has eliminated the problem.  She returned, probably because my iPad in sync with iTunes via WiFi upward.

  I just deleted the adblocker to iTunes apps, but now I have to bring once again off the coast of the iPad.  How do I in the settings?

  Hello, Tom.

  Please visit Apple support communities.

  I understand that you want to delete a couple add applications from your iPad.  The installation to keep your iPad via Wi - Fi and application synchronization, you need to remove the two applications for your iPad and iTunes when connected to your home network.  Here are the steps that will guide you in this process.

  Remove an application

  Remove an application by following the steps below:

  1. Press and hold the application until it stirs.
  2. Press on the in the upper left to remove.

  You may be prompted to confirm that you want to delete the app. If you see a pop up window that says, "[application name] remove will also remove all the data," press DELETE.

  Remove music, movies, applications and other content to your iPhone, iPad or iPod touch

  12 iTunes for Mac: delete the songs, playlists or other elements

  See you soon

• Remove Ukash ipad

  How can I remove ukash ("police") virus / malware
  Since ipad Air?

  Fortunately, your iPad is not a virus, Ukash or otherwise. See below.

  Phony 'technical support' / 'ransomware' popups and web pages

• Remove the ' system VLAN "Nexus 1000V port-profile

  We have a Dell M1000e blade chassis with a number of Server Blade M605 ESXi 5.0 using the Nexus 1000V for networking.  We use 10 G Ethernet fabric B and C, for a total of 4 10 cards per server.  We do not use the NIC 1 G on A fabric.  We currently use a NIC of B and C fabrics for the traffic of the virtual machine and the other card NETWORK in each fabric for traffic management/vMotion/iSCSI VM.  We currently use iSCSI EqualLogic PS6010 arrays and have two configuration of port-groups with iSCSI connections (a physical NIC vmnic3 and a vmnic5 of NIC physical).

  We have added a unified EMC VNX 5300 table at our facility and we have configured three VLANs extra on our network - two for iSCSI and other for NFS configuration.  We've added added vEthernet port-profiles for the VLAN of new three, but when we added the new vmk # ports on some of the ESXi servers, they couldn't ping anything.   We got a deal of TAC with Cisco and it was determined that only a single port group with iSCSI connections can be bound to a physical uplink both.

  We decided that we would temporarily add the VLAN again to the list of VLANS allowed on the ports of trunk of physical switch currently only used for the traffic of the VM. We need to delete the new VLAN port ethernet-profile current but facing a problem.

  The Nexus 1000V current profile port that must be changed is:

  The DenverMgmtSanUplinks type ethernet port profile

  VMware-port group

  switchport mode trunk

  switchport trunk allowed vlan 2308-2306, 2311-2315

  passive auto channel-group mode

  no downtime

  System vlan 2308-2306, 2311-2315

  MGMT RISING SAN description

  enabled state

  We must remove the list ' system vlan "vlan 2313-2315 in order to remove them from the list" trunk switchport allowed vlan.

  However, when we try to do, we get an error about the port-profile is currently in use:

  vsm21a # conf t

  Enter configuration commands, one per line.  End with CNTL/Z.

  vsm21a (config) #-port ethernet type DenverMgmtSanUplinks profile

  vsm21a(config-port-Prof) # system vlan 2308-2306, 2311-2312

  ERROR: Cannot delete system VLAN, port-profile in use by Po2 interface

  We have 6 ESXi servers connected to this Nexus 1000V.  Originally they were MEC 3-8 but apparently when we made an update of the firmware, they had re - VEM 9-14 and the old 6 VEM and associates of the Channel ports, are orphans.

  By example, if we look at the port-channel 2 more in detail, we see orphans 3 VEM-related sound and it has no ports associated with it:

  Sho vsm21a(config-port-Prof) # run int port-channel 2

  ! Command: show running-config interface port-canal2

  ! Time: Thu Apr 26 18:59:06 2013

  version 4.2 (1) SV2 (1.1)

  interface port-canal2

  inherit port-profile DenverMgmtSanUplinks

  MEC 3

  vsm21a(config-port-Prof) # sho int port-channel 2

  port-canal2 is stopped (no operational member)

  Material: Port Channel, address: 0000.0000.0000 (bia 0000.0000.0000)

  MTU 1500 bytes, BW 100000 Kbit, DLY 10 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA

  Port mode is trunk

  Auto-duplex, 10 Gb/s

  Lighthouse is off

  Input stream control is turned off, output flow control is disabled

  Switchport monitor is off

  Members in this channel: Eth3/4, Eth3/6

  Final cleaning of "show interface" counters never

  102 interface resets

  We can probably remove the port-channel 2, but assumed that the error message on the port-profile in use is cascading on the other channel ports.  We can delete the other port-channel 4,6,8,10 orphans and 12 as they are associated with the orphan VEM, but we expect wil then also get errors on the channels of port 13,15,17,19,21 and 23 who are associated with the MEC assets.

  We are looking to see if there is an easy way to fix this on the MSM, or if we need to break one of the rising physical on each server, connect to a vSS or vDS and migrate all off us so the Nexus 1000V vmkernel ports can clean number VLAN.

  You will not be able to remove the VLAN from the system until nothing by using this port-profile. We are very protective of any vlan that is designated on the system command line vlan.

  You must clean the canals of old port and the old MEC. You can safely do 'no port-channel int' and "no vem" on devices which are no longer used.

  What you can do is to create a new port to link rising profile with the settings you want. Then invert the interfaces in the new port-profile. It is generally easier to create a new one then to attempt to clean and the old port-profile with control panel vlan.

  I would like to make the following steps.

  Create a new port-profile with the settings you want to

  Put the host in if possible maintenance mode

  Pick a network of former N1Kv eth port-profile card

  Add the network adapter in the new N1Kv eth port-profile

  Pull on the second NIC on the old port-profile of eth

  Add the second network card in the new port-profile

  You will get some duplicated packages, error messages, but it should work.

  The other option is to remove the N1Kv host and add it by using the new profile port eth.

  Another option is to leave it. Unless it's really bother you no VMs will be able to use these ports-profile unless you create a port veth profile on this VLAN.

  Louis

• How to remove the local drive of the storage profile

  I use 5.1.1 with last vcenter vcloud. My problem is that my profile of single storage includes local disk. (when I click on * all properties in vcloud)

  I went to vsphere client to vcenter (Home > inventory > data warehouses and the cluster data store) I see ESXi local disk. is there a way to delete it without deleting the content of the discs? the vcloud vms will go to local disk? concern is not shared between hosts. Thank you

  You create profiles of storage for data storage you want to use.

  First, assign user-defined storage capacities:

  1. Home-> inventory-> data and data Clusters store warehouses
  2. R.Click the data store you want to use-> Assign User-Defined storage capacities
  3. Click new... and set a name and a Description
  4. Repeat for all warehouses of data to include in the PVDC

  Second, to create profiles of VM storage

  1. Home-> management-> VM storage profiles
  2. Create a VM storage profile
  3. Name and assign storage capacities of the list defined by the user that you created
  4. IMPORTANT: Select the VM storage profile (buttons at the top of the window)

  Third, VCD storage profiles update

  1. Manage and control-> them vCenters
  2. r.Click vCenter and refresh the storage profiles (may take a few minutes)

  Fourth, edit PVDC

  1. Manage and monitor--> provider TDC-> open your PVDC
  2. Storage Profiles tab
  3. Add new profile storage
  4. Remove the * any storage profile (disable and then delete r.click)

• has wanted to remove the icloud photos off my mac that I turned off the icloud on my mac.  but not off my ipad mini. This will remove the iPad?

  I wanted to delete the photos from icloud on my mac to give me a bit more memory, but not out of my ipad, so I turned off the icloud on my mac. I disabled icloud sharing on my ipad before doing this it will delete them off my ipad?

  All you should have to do is stop iCloud photo syncing on the Mac. Then, when you delete photos, it will not sync to iCloud.

• How can I remove the automatic 'saved in my bookmarks profile' forever and disable the bookmark backup place daily every day

  Hello 0457 GMT in the United Kingdom on Thursday, February 28, 2013.

  I would like to disable the automatic daily bookmark update files that Firefox creates and also delete all my previous Firefox backups daily automatic bookmark in my account. How long are the automatic daily backups of bookmark stored for it please.

  I would just make one. JSON back manually please.

  Thank you
  pingu70

  The value of the integer pref browser.bookmarks.max_backups to 0 on the topic: config page.

  • http://KB.mozillazine.org/about:config
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Have a wand scanner laptop-don't fall under removable storage upward. Bought a Sony R/W card reader. It connects either. Supposed to have improved 1.

  I tried all USB ports-uninstalled every time when I get the? other devices -? USB mass storage.  Assistant can never find anything.  Tried to dwnld software from Sony for the sale of the unit.  Did not help. Replaced the stick once.  FRY it connected to their computer-no problem.

  Hello

  What is happening with all USB devices or just the two? If nothing works in the USB ports, you can check if USB is enabled in the BIOS menu. While Windows is booting, you should see an option to enter the BIOS. Once there, make sure the USB option is set to enabled.

  I hope this helps. Just reply to the results.

• iPad keeps old Apps I try and remove on screen and through my MacPro.

  I have an iPad retina (first edition) and I'm in OS 9.2.1. There are a lot of Apps on iPad that I would like to remove, but I can't. The old problem of Apps jiggling after pushing for 5 seconds does not produce the small black star in the corner. And even if I try and click on the corner without the Black Star, the software remains on the iPad. Now my iPad's storage is full and I have to get rid of unnecessary applications that occupy too much space. I also tried to eliminate them through the connection of the iPad to my MacPro (El Capitan running), but nothing helped. It seems that the app is eliminate and yet, on the iPad, occupation of space.

  Some suggest to go to settings > general > Restrictions to control restrictions, but he KEY IS NOT called Restrictions on my iPad in general. So I don't know what to do! Any help is greatly appreciated!

  What do you see in settings > general? You should see something like

  

  If you can't see that then you don't have an iPad to demo, or a profile or an Exchange (for example work) e-mail account set up on what could change what is available in the settings?

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• How can I remove an account from a computer profile without deleting data?

  Hello! I want to delete mozilla of a computer and delete my account profile so that all my data on this computer is removed. But I use the same profile in mozilla on a different computer and I do not know if my profile will retain the data stored on this computer after it is deleted in the other. Can you please clarify this issue for me. Thank you!

  Best,
  Vanya

  If you want to remove your personal data on a reliable computer, then you will need to perform a secure erase to erase the data on the hard drive.
  Otherwise Windows will mark only data as being deleted.

  It is best to disconnect from Sync before you delete data on a computer to prevent other computers from getting affected.

  You can use the Profile Manager to delete a profile.

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • C:\Users\ < user > < profile > \AppData\Local\Mozilla\Firefox\Profiles\.

• How to remove an administrator user profile in windows vista?

  My computer has 2 Administrator profiles. One of them is here over the years and one of them was recently created accidentally. I am trying to remove this accidental profile but when I go into control panel > user accounts > add or remove user accounts and click the appropriate profile, it doesn't have an option "Delete account" as do all other accounts. So I tried the signature on the account I wanted to remove and remove it from there again once, the option 'Remove account' is not there, but he is there for all accounts - same Director of another one. How can I remove this unwanted profile?

  Hello

  By default in OS 4 coming
  Default administrator, guest, help support.ms / remote,.
  You cannot delete default admin, you can remove accidental created admin
  Instead of delete, you can DΘsactiver this admin account, log in as a lead Director
  Press win + r > run > lusrmgr.msc > double click on the administrator to find user folder > click right properties > check account disable > fact
  If you want to disable admin created accidentally do disable same.but only, before taking off to disable that represent files and backup files