Remove and reinsert the battery to reboot the computer from sleep mode

Similar Questions

• Unable to resume the computer from sleep mode

  Original title: monitor going to sleep then will not return without tapping computer power button. used to click just a key

  This monitor goes to sleep. have a very hard time to bring. used for any key just click and the monitor lit up back. I must now press the power button to turn on. This may turn off the computer.

  Hi Larry Lane,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  For reference:

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• What happens when Task Scheduler is scheduled to wake the computer from sleep mode

  I have the windows vista Task Scheduler to wake the computer from sleep to run a command script. some tasks in the script work correctly and some do not. This is because the computer is "awake from sleep", whatever that means. This is not what is happening, because the tasks that the batch script runs when the computer is actually on, with display and all are very different tasks, it runs while the computer gets "awakened from his sleep", so what happens exactly when the task schedler wakes up the computer of mode sleep under vista? How is it possible to emulate a real awake state with the Task Scheduler to a State of sleep, according to a schedule?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• USB mouse - I don't want to wake the computer from sleep mode

  Windows 7 - I don't want my USB mouse to wake up my PC from sleep mode - some say go to Device Manager and uncheck the box 'Allow this device to wake up the PC' - I have in Device Manager - is this still possible?

  Hi David,

  Please contact Microsoft Community.

  As you informed in the query, you can not find to allow this device to

  wake up the PC in Device Manager.

  I suggest you follow the steps below to find the option.

  1. click on start.

  2. in the option Search , please enter run.

  3. in the run window, type devmgmt.msc.

  4. double-click on USB device in order to develop it.

  5. right click on the USB device and click on Properties.

  6. click on the power management tab, check allow this device to wake the computer.

  7. click on OK.

  For more information:

  On the power management

  https://support.Microsoft.com/en-us/KB/2740020

  I suggest you back up the registry and check if that helps.

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Warning: serious problems can occur if you have any changes in the registry incorrectly. So, make sure to run back up the registry before you edit it.

  This information is useful. Please let us know if you need help with Windows, we are happy to help you.

  Thank you.

• How can I fix the very slow response after the wake up the computer from sleep mode?

  Never had this problem until a few days ago. Using Windows 7. I want to use the "sleep mode" whenever I leave my office (be it for a few minutes or several hours). Always came back just as I left it (tabs, work-in-progress, etc.) until recently. If I reboot, everything of fine, up to what I use mode "time" again. So painful.

  Thanks for the tip. I disabled the accelerator according to your link and suggestions and the problem seems to have been resolved, at least for now!

• The password on the computer is not recognized after resuming the computer from sleep mode.

  Original title: windows password problem

  This just started today. When I log on to the computer after having paused, it says that my password is incorrect. Caps lock is disabled and the password. Then I hard boot my computer & it will take my password. What's happening & how to fix it? Help please.

  What do I do or what can I change it to something like a real password?

  Now that you have at least a password that works you must run your own experiences. You might have a problem with CapsLock, NumLock or a few keys that misbehaves. Change a letter/digit at a time until the password fails, you must point in the right direction. We cannot do this for you.

• Impossible to wake the computer from sleep mode by moving the mouse.

  Original title: problem with winter and power off

  Recently, after having my laptop cleaned (dust) I can't do the hibernation option or turn it off (just taking the button turn off for a long time). The screen goes black, almost as if she's asleep. but I can't wake him by moving the mouse. I tried all the stuff I found on the internet and on the microsoft page. Please help :( Also, im using WIN7

  Hello

  I suggest you to update all the drivers on the manufacturer's Web site and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Contact Asus:

  http://support.ASUS.com/contactus.aspx?SLanguage=en

  You may also contact the company who did maintenance work on the laptop.

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• Email that can be removed and freezes the computer when you try or when you scan up to this particular email when opening other emails. Other emails are very good and can open and delete them.

  I have an email on Outlook Express, which leaves me the delete (distribution of the mail... Mail delivery failed).  Whenever I try to delete or scan down to it, it causes my computer to freeze and have to go out and come back and work with my emails.  All other emails can be read and deleted.  How can I remove this email? I have Windows XP and uses a Compacq computer.  There is also a small icon of trombone to the left of this message.  Thanks for any help you can give me.

  Try to go to view | Layout and turn off the preview pane, so that the message does not open when you select.  Select the message and press and hold the SHIFT key and press the Remove button to remove it permanently.  See if it works.

  Steve

• Remove # and clear the line from txt files

  Hello

  I have problem with my program.

  I need to remove the empy lines in my txt file.

  This is file look like:

  # Standard capacitance data file
  
  # Model capacity: parallel (K = 3.0)
  
  # Created by: ECT32v2 for Beta2.25 of Win32 (July 10, 2003 01:54:24)
  
  # Source: rec_flow_f45_v800_n2.bcp
  
  #    Description: contents of the buffer to capture mode
  
  #    Date: 12:04:43 GMT standard time, 29 March 04
  
  # Electrodes = 8, measures = 28
  
  # Data for plan 1
  
  # 1 frame (0 msec)
  
  0.006-0,001-0.004-0, 002 - 0.028-0.031-0,002
  
  -0.008-0, 005 - 0.007 - 0.024 0.005 0.004
  
  -0.014-0, 002 - 0.011-0.004 0.002
  
  -0.008 - 0.003 - 0.004 0.003
  
  -0.011 0.001 0.002
  
  0.005 0.004
  
  0,008
  # structure 2 (10 ms)
  
  -0.002 0, 005 - 0.008 0.006-0,002 0,023 0.011
  
  -0.008-0.004 - 0.004 - 0.003 0.010 0.001
  
  -0.007-0,001-0,012 0.007 0,008
  
  -0.015-0.004 0.002 0.001
  
  -0.007-0,002 0.001
  
  -0.002 0,008
  
  0.005
  
  

  I want to remove all empty lines, lines containing ' # '.

  I try as an attachment, but it does not work.

  How can I do this?

  Regads,
  Sorry for my English

  Ben Merci for example. Somehow, I missed the framework which enabled search expresion. Your example has sent me to the help files to understand. I have modified my first code for the show method, I hope I have the correct explanation. Not trying to do someones homework for them, but for those who need a quick start, maybe this will help someone else along the way.

• Tablet in the form of progress bar during the return from sleep mode

  When I start my iMac mode 'sleep', it takes forever to load initially. When lights up the screen, this pill in the form of loader/progress bar appears on the display of connection with all inactive until it ends. When it is finished, I am able to connect successfully. I also got the gray screen of death twice now, assuming it's related.

  I wiped the computer and reinstalled the operating system last night and already the problem persists. No matter which other experienceing this issue or know a solution?

  Thank you.

  Mac computers: progress bar appears after waking from sleep - Apple Support

• Keyboard is frozen to reactivate the computer from Powersaver mode.

  When the computer as reactive Powersaver mode, the keyboard is frozen or gives erroneous characters for the press.  It started in the last two weeks.  This is a problem caused by a recent update to Vista?  I have an antivirus program and do not have a virus?

  Try the system restore: http://support.microsoft.com/kb/936212

• How to wake up the computer from sleep

  I have a Pavilion HPE h8-1100, 64 bit, Win 7 running. When computer goes to sleep, I have problems, he wake up. I tried different keys but nothing happens. Microsoft says to check the manual of the computer, but I don't see anything in the manual that tells me what to do. I end up turning off the computer.

  I found touching the space bar or the 'any' key will sometimes wake him, but if he sleeps soundly, try pressing the power briefly - button not long enough to power it down, just enough to "poke" it.

  I put a power of 'Never' option and called "Virus Scan" for when I want to let it run without me fall asleep on me. -otherwise the darn things NAPs more than my dog!

  R

• How can I remove and restart the device from the devices pending?

  Hello

  I have a problem with the number of systems in State waiting, but I am unable to assign layer or something.

  I tried to remove the Mirage client several times already but without success - systems stay in "connected suspended" State.

  Any ideas that I can do to make it work?

  Thanks in advance

  

  Hello world

  Thanks for the replies.

  I managed to past this error with VMware, no real support solution, and more:

  -These "suspended" systems seems to have an action being performed on them (e.g. layer provisioning) - clear all Task Monitor allows

  -update to 4.0 4.23 also authorized "ghost" items, new version also seems to be more stable

  It could be that useful...