Remove black background of stray light.

Similar Questions

• How can I remove a black background for iMovie version 10.1.1

  I realize you can remove backgrounds, green, and blue, but can someone please tell me how I can remove a black background on the images.

  If you are referring to the use of the utility screen green/blue, green, and blue are the colors of background, only that you can use in iMovie.  To have a wider range of background color options, you must use a professional video editor such as Final Cut Pro.

  Geoff.

• Overlay one GIF/video with a black background on images with light shades

  I have a repetitive GIF I want to superimpose on this again in a PremPro CC title sequence.

  

  The hawk was a GIF that I converted into a video and rendering the Photoshop CC MP4.

  The idea is that the Eagle flies down and Lands on the title, so I placed the short hawk video in its own sequence and repeated enough times to cover the time from the title sequence.  My thoughts as I could to scale and move the hawk as a single sequence.

  The problem is that I can not remove the black background.  Google told me to use the screen mode, but will not work on this background.  I guess I messed up when rendered from Photoshop and should somehow doing this with an alpha channel, but basically, I have no idea.

  I am especially well with Photoshop, along with PremPro and struggle with AE when I have to.  Windows 7 if it made a difference. 1080 p H.264

  Thank you

  BTW, the GIF has a transparent background

  

  OK, I thought about her from a very old Photoshop forum thread.  H.264 does not support transparency, and I go out to one. MOV that enabled alpha channel options.  Fortunately, I had installed Quicktime.

  I'll mark this supposed responded to clear the thread.

  Thanks anyway.  I know that I need help down the road.

• Problem: Shadow of light color on black background when printing

  Using InDesign CS3, PC.

  I have a book cover design that looks perfect on screen. There is a section with a black background and the letters of color above it. Also on top of this black background is a picture of a dinosaur (made in illustrator CS3). The image was placed in the InDesign file and has no color to the background. But when printed (Xerox Phaser), there is a colored shadow where the image superimposed on the black background section.

  There are also colored boxes on the other black background sections where shadows (35%) occur on black background.

  Could someone tell me what I am doing wrong? I've never dealt with 100% black in my drawings before and I have to do something wrong.

  Again, on the screen, you don't see none of these colored areas on the black top. It's only when I print as they appear.

  Thank you

  Cathy

  InDesignSecrets"Blog Archive" eliminating the YDB (yucky discolored box) Syndrome

• How to remove the background of the image?

  Hello

  I do a simple programming using Labview 2009. May I know someone at - he no how do I remove the background of the image?  Programming is using camera. First of all, it shows the image... then the threshold in white black... then when the "wanted" image detected it will save the image... but my problem is the image cannot be analysis because of the background is green... so, I want only the object... FYI, the user that the image in RGB and the user only has the bottom to be black but the conveyor is green... we do want to not change the conveyer with the expensive sensor and use.

  You can do a checkout from plan color and then apply threshold on a grayscale image. What is the color of the object? Can you put a picture so that I can work on it?

• black background behind the "Tools".

  Illustrator - 6 is anyway to change the black background to white in the Toolbox?    Black is very ugly.

  Try the preferences > User Interface and turn this lighter.

• When I cut my phone I see a black screen, but the lights shine, could someone help?

  When I turn on my laptop I can see is a black screen, but the lights turn on, could someone please help me with this?

  This is a seller on eBay who will fix it for $100:

  http://www.eBay.com/ITM/HP-DV2000-dv6000-DV9000-no-video-laptop-Reball-repair-6-month-warranty-/180928872542?PT=LH_DefaultDomain_0&hash=item2a2033805e

  These guys have different levels of service; cheaper if you remove your motherboard and that just send.

  You have a port monitor on the laptop. Hang a regular computer to the laptop monitor and the power. Press the fn key and the f4 key when you rewind to see if it appears on the external display. If this is probably just a screen.

• Remove unwanted background does not

  To use the images on PowerPoint, I often remove unwanted background of the image.  In order to make sure that the image is on a Word with layer 0.  I then select a mask.  To ensure that I have on the mask and use the brush etc. to add to the mask the bits I want to delete.  The selection shows to remove black-and-white authorization (or catering areas I wrongly deleted). That's how I used it in the past with no problems.  Now, the selection mask shows gray and he is only partially remove the background.  It's it's doing sort of transparency.  I don't remember making any selection as.  I do not see how to restsore the normal selection mask black, which removes all the unwanted image part.

  Hello

  USE shortcuts

  D - for default

  X - to switch between foregorund and background color

  and then apply your selection.

• Image for a black background fade

  Hey guys,.

  Im trying to fade an image on a black background. I was able to fade the image of a few tutorials, but not quite how I want. I want the image to blend into the black background. I was able to get the image to fade but its fading in bright white. I hope it's a quick one of you there

  Thank you

  Jon

  I know that if I understand exactly what you're trying to do, but if you change it 'mode' to 'screen' to 'normal' and drag the pointer from left - right (or remove the "flip side" and drag right left) I don't know that that's all what you're trying to do.

  

  Another way is to paint 'the edge' with a big brush in the same color as the background.

• How to remove the background in the photo?

  I have a product from a table on a dark background. I need the best way please remove this background so that the table is separated with a transparent background (photo will appear on the web). The table also has slats and the dark background can also be seen here.

  I tried several times, but without success.  In my view, using the tool magnetic lasso would work, however, I'm having a very hard time finding out out to use it. In addition, I found no good video tutorials on the web.

  Can someone please give me detailed instructions on how to do this? Thank you very much.

  All of these straight lines make the cry of to use polygonal lasso.

  1. click on the lock icon to background in your Layer palette. Without releasing the button of the mouse, make sliding the lock on the trash icon can release when you arrive on the trash can. (This will convert your background layer to a regular layer layer without going through a right dialog box.)

  2. Select the polygonal lasso in your Toolbox. Start in a corner and click to end in a corner... go around Chair until the outer edge of the Chair is selected.

  3. If you have PES 9, add a layer mask to the layer Chair. (Note: you cannot add a layer mask to a... locked background layer so be sure to step #1.)

  You should now have the outline of your Chair.

  4. with the polygonal lasso still selected, change the icon to add to the selection.

  

  Straddling the icon square... you are the UI will be different because is not PES but the symbol icon looks the same in your toolbar options.

  4B. use polygonal icon to select the Interior (between the slats) areas of Chair to be deleted.

  4 c. When you have finished click on mask to target. Press D to define your tool box color chips to black and white by default.  Fill with black paint selections by pressing Ctrl + Backspace if on a PC. (If the color chips were reversed would be pressed alt + Backspace if on a PC.) Alternatively, you can just dump the black paint on the selection by using the paint bucket.

  Keep in mind with masks, you can go back and fix things by using black paint to hide and white paint to reveal. Usually, it is a good idea at this point to temporarily lift a United under your image background to get a good look at the edges.

  You should now have your Chair selected, but you can do some extra steps to clean up a bit.

  Cleaning option...

  Turn off the background layer if you added one to inspect the edges.

  1. create a composite of your Chair at this point. Add a black layer, then press ctrl + shift + alt + e keys if on a PC. If on a mac, use command + shift + opt + e. (this will place your Chair selected on a layer itself. After doing this turn off the Chair hidden layer.

  2 Ctrl click on the thumbnail of the Chair in the palette of the layer if a PC to choose the President. (If on a Mac, I believe you cmd click on the thumbnail.)

  3. go to your menu and choose the selection command<>

  4. with step #3 active selection, go to the menu and choose the selection command<>

  You can also try to select<>

  5. Add a layer mask to your layer of Chair.

  You can check your results by turning on the solid color layer, you added. Note: Steps 3 and 4 could be made using refine edge, if you have one of the latest versions of items.

  Final step.

  You must save in a format that supports transparency... PNG, TiF, PSD, Gif... pretty much anything except JPG. I don't know which format is best for Web... probably PNG, but cannot say that it is the road that is best that I don't know which works best with most browsers.

  It might be too small to see the difference between just selecting and clean the edges using the contract and a touch of feathers.

  Note: You could even hide a composite of the two versions that the slight bit of feathers can round the corners slightly. I think if it was me it would be the way I would take... use the version with feathers but mask to selectively in the corners that look too soft. My version of contract/feather in my eyes seem a bit soft (rounded) in the corners under the seat of the Chair.

• Perfectly black background

  I am currently doing a video of a candle in the dark. But when I watch the video on the pc, the black background has a lot of noise and is not perfectly black. I was wondering if you have any advice for me on how to get the background all black and smooth. I should do this through editing the video after shooting, or is there something I need to do (with perhaps slight) during filming? Thanks in advance for your ideas and suggestions.

  Aymen

  Hello

  Pull the spark plug and hand in a single layer,

  take a picture of your card and make the 3d layer

  http://livedocs.Adobe.com/en_US/AfterEffects/8.0/help.HTML?content=WS3878526689cb91655866c 1103906c6dea - 7e3e.html

  Put under / behind the film with the candle and hand and change its perspective so it seems that the candle sits on the map.

  then make a fire of sequels and it can simulate the light falling on the candle card

  http://help.Adobe.com/en_US/AfterEffects/9.0/WSAB474311-4B4C-4D54-8887-0F6459F25206a.html

  You can move the property of the brightness of the light so it seems that it sparkles

  http://library.CreativeCOW.NET/articles/ebberts_dan/ae6_exp.php

  There are a lot of video tutorials on the net, you should check the effects after those 3d that will help a lot.

• I can eliminate fading on black background?

  Hello

  I am designing a book cover in CS3 (using a PC with Windows XP Home Edition).

  In the deisng of coverage, there is a block of text with the text in color that has a black background around the text. I also have a picture of a dinosaur that slightly overlaps the text block on the lower edge. If a put a shadow on the dinosaur image I get a discoloration inside the object frame that covers the black block of text when the page is printed on a Xerox Phaser. If I remove the drop shadow on the dinosaurs and then place the image as part of object, I don't get any discoloration. This discoloration is visible in printing, I don't see it on the screen. (Perhaps my printer will not have it no more).

  I don't want the shadow on the dinosaur in the final version. Does anyone have any suggestions as to what is happening? I would appreciate your help. Thank you, Cathy

  You can see a copy of the cover without the shadow on the large dinosaur to:

  http://www.figuresinmotion.com/NEW_FIGURES_SITE/figure_images/Dino_Book_Cover_sm.jpg

  InDesignSecrets"Blog Archive" eliminating the YDB (yucky discolored box) Syndrome

• How can I change the black background of iTunes 12.4.1.1

  I am running iTunes 12.4.1.1 on OS 10.8.5 on a Macbook Pro. How can I change the black background on iTunes to simple white.

  Thanks for any help

  Savewolves

  Where do you see a "black background" in iTunes?  You can include a screenshot?

  Command-shift-4 to take a screenshot of the portion of the screen showing the problem.  Then drag the files to screenshot (which appears on the desktop of your Mac) in your reply in the Safari window message.

• Fully black background in itunes?

  I had a problem in itunes for the past while, and after update, it has not changed. iTunes has a completely black background, it is impossible to read a text unless its selected. Problem occurs in both the build that you can dl from apples website and itunes tried erasing sierra files beta ver. and delete the application itself through terminal, no luck. any suggestions?

  

  (rmbp 13', end of 2013 model)

  Hello

  As you use the beta software, you should post your query on the developers forum. Asked the moderators to move the pole.

  JIm

• After you have installed windows on my notebook 10 notes all drop-down history menu and favorite tools have black background so can't read the text

  After installing windows 10 on my notebook that all drop-down menu history bookmarks tools etc. have black background so can't read the text

  It was much simpler that that I just check if my version of FireFox has been updated today it wasn't downloaded and everything beautiful. Thank you for everything that other gibberish "I also don't know solution but try this" typical in the forums with respect to proposed solution has no address or related to this question please