Remove orphaned Services

Similar Questions

• I can't camera removed to service center

  I want to buy a handset MotoE. But there is a problem; I'm not allowed to carry a camera phone at my place of work. Is it possible for me to get the camera module removed to service center. And if so will it affect my warranty.

  The camera application can be turned off, though, or you could place ribbon or something on the lens, while at work, perhaps? Or place a small piece of paper on the goal, under the back cover, or between the tank and the case, if you get a?

  There are mobile device also the management applications used by some companies that will put the parameters to restrict the use of the camera.

• Removable storage service, event ID: 115

  I am getting error during backup taken by ntbackup on windows 2003 server with sp2 patch below...

  I use IBM HH LTO 3 SCSI sequential by car.

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 115

  I have the latest patch for OS and H/W confirmed. I have problem while taking backup of the media, while taking backup to disk, it works well.

  Hello

  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• Problem with the Removable Storage Service and Microsoft Fix it 50198

  I updated Windows XP computers in an office from Internet Explorer 7 to Internet Explorer 8.  During the process, the installation gave me security errors.  I resolved to fix these errors by running Microsoft 50198 recommended in troubleshooting Internet Explorer 8.

  The facility has been able to complete, but there is a new problem.  All computers that require this hotfix are now unable to use and USB storage media.  The following error is generated in the event log:

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 111
  Date: 15/03/2011
  Time: 12:48:09
  User: n/a
  Computer: WCML-HNCX5J1
  Description:
  RSM could not load media in drive drive 0 of library SK_USB20 drive Flash USB Device.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 01 00 00 00...

  I am logged in as an administrator and have tried several different USB media with the same results.  I am posting this in the security group as it seems to be linked to security changes made by Microsoft difficulty he 50198.  Other computers that do not need this fix do not have the same problem.

  Thank you for your response.

  I'm working on it, I think I found my problem.  These computers are part of an area in which I do not.  They will be removed from the field in a few weeks as they are separate from this company.  The area has some group policy settings that limit to me logged on as a local administrator.  I think I'll have to wait until computers were removed from the field to solve this problem.

• Is it safe to remove the service paks

  Once the service paks are downloaded is it safe to remove them from compartments of download with the add-in and remove the program to secure space?

  You should not remove the Service Pack, but you can store if you wish (noting once you've done that you don't ' be able to uninstall service packs).

  See:

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  Please note this is only for Windows XP and is not on Vista or Windows 7

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to remove old Services of FXM of the dashboard of the EU in the FMS

  How to remove old Services of FXM from edge of the EU in the FMS?

  We have removed the few services of FXM, but again, we can see that in the EU in FMS dashboard. Please suggest measures to clear those FMS.

  Hello

  End-users objects exist generally in the administration server > data management (note the fxm and fxv nodes)

  

  but they may exist in other places (according to what dashboard they appear on).

  The caution would be to open a support case and support check that right objects are deleted in the right place in the data tree.

  Hope this helps

  Golan

• How to remove the Service to intercept

  Hello

  When I tried to restart the Service intercept of the Services.msc, I got this error:

  «The service did not demand launch or timely control»

  Then I reinstalled the Catridge DotNet on the server to check if the Service "intercept" is started. Unfortunately, I'm unable to start the service and may see the following errors when I try to delete the Service to intercept:

  Error 1058: The Service cannot be started because it is disabled or because it has no enabled devices associated.

  I tried to 'underhardware profile' in Intecept Service-> properties-> connection-> hardware profile and also tried setting the Startup type to 'Automatic' in the general tab, but it still does not work.

  I tried to remove the service, even by using the command line using the following command:

  SC delete Service intercept

  It is to throw an error ' the specified Service does not exist as an installed Service'.

  Please suggest me why I am unable to remove the service, as well as the possible troubleshooting steps to remove the service.

  Kind regards

  Shiva G

  When you uninstall the .NET agnet please follow the KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL73815

  Read the description it sounds to me like the system right now, it's in a strange state where the agent was not removed correctly and is not installed correctly.

  My recommendation is to open this with assistance as soon as possible, there may be a cleanup using utilities from microsoft.

  Golan

• How can I remove my service of publication of Lightroom Revel?

  How can I remove my service of publication of Lightroom Revel?

  You can remove plug-ins that are included as standard? You can not on my system.

  Alternative is to select and choose disable, or right click on the header of publish the Services and choose 'Hide '.

• How can I remove the service pack blocker tool?

  I installed the service pack blocker tool in my windows vista computer, and now I want to remove it. Should what registry keys I delete?

  for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d7c9a07a-5267-4BD6-87d0-e2a72099edb7&displaylang=en

  The executable creates a registry key on the computer on which it is run that blocks or unlocks (according to the used command line option) the provision of a Service Pack to that computer through Windows Update. The key used is HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate.

  When the ' / ' B is used to command line option, the name of the value of the key 'DoNotAllowSP' is created and its value to 1. This value blocks delivery of a Service Pack to the computer through automatic updates or Windows Update.

  When the ' / U' command line option is used, the previously created registry value that temporarily blocked the delivery of a Service Pack to the computer through automatic updates or Windows Update is removed. If the value does not exist on the computer on which it is running, no action is taken.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Longer Windows XP Home SP-2 be removed when Service Pack 3 is installed?

  SERVICE PACK 2, VERSION 2.0 AND 3.0 AND SERVICE PACK 3 ARE CURRENTLY INSTALLED.

  Where you see the option to remove SP2?  SP2 is more can be removed, it was replaced by SP3 and service packs are cumulative, SP3 includes SP2.

  John

• Does anyone know how to remove orphaned thumbnails of 13 elements?

  I managed to accumulate a very large number of files image duplicated in my db 13 items. It was not practical to remove in E13, so I removed the externally. This left me with a disconnected for each deleted image file thumbnail. If I understand the program, all the tags and other metadata associated with the image file - not the thumbnail. So, I'm looking for a way to either delete orphaned thumbnails sort of batch processing... or maybe rebuild the catalog and generate all new stamps? (if possible)

  Advice or tips would be appreciated.

  Thank you

  David

  DRC8220 wrote:

  If I understand the program, all the tags and other metadata associated with the image file - not the thumbnail

  David

  The catalogue includes the thumbnail cache, which is associated with each element multimedia as well as other metadata.

  Run the command "reconnect missing files" in the file menu of the Organizer. After the search, you will see a list of missing files. There is a small icon on the top of the dialog box to open a dropdown menu with the options:

  -to select all the missing files

  -to remove all the missing files from the catalog.

  Do both, that will remove these entries from the catalog and thumbnail cache.

  ... or perhaps to rebuild the catalog and generate all new stamps? (if possible)

  Yes, it's another solution:

  Photoshop elements (PSE) knowledge base. : how the miniature correct hourglass (generic) in elements Organizer?

  Same solution as the hourglass issue.

• Cannot remove orphaned snapshots

  One of the servers ESXi 4.1 in my care ran out of disk space today.  This problem has been resolved.  One of the causes is some old shots that take up to 70G (000002,000003,000006 files).  I don't see that they are used.  It seems that the virtual machine has been removed and readded by using the same VMDK. because it's using 2 different directories.  I don't think that this is part of the problem.  The user interface shows no snapshots.

  I tried flushing of invisible snapshots by taking a snapshot and deleting everything in the UI.  Snapshots are still there.  When he creates a snapshot, it uses 000001 and 000004.  The old clichés have not been affected at least 4-5 months, looking at the dates.  I tried to delete them in the user interface, but she came back with an error.

  I watched the vmx file.  He referred 000006 as reader of scsi0:1, but it is not enabled.  SCSI0:0 is the only player.  I thought that if I emptied the 000006 in the vmx file, I might be able to remove it.  So, I created a scsi0:1 disk and then deleted.  000006 is not referenced in the file any more, but it did not help.

  I looked at the latest vmware.log, I don't see reference to files, 2,3,6.

  How can I make sure that they are not used?  And how do I get rid of these files?

  This particular server account local storage, vmotion is not an option.

  I have attached the logs and vmx files.

  Thank you

  Wayne

  If you are sure that the snapshots are no longer needed, but do not want to delete the files immediately, I recommend you properly stop the virtual machine, and then create a new subdirectory in the folder of the VM data store and move the "orphans" files in this folder. Then turn on the virtual machine again, and once you can confirm that everything works as expected, you can delete the subdirectory.

  André

• Remove the service

  I'm trying to remove the webaccess of all ESXi hosts.  Vmware-vim-cmd proxysvc/remove_service ' / ' command 'httpsWithRedirect' work by the KB, but I'm looking for a simple to use powercli command that will reach out and hit all of my systems.  I don't see a cmdlet Remove-VMHostService so I am at a loss.  Any help is appreciated to grealty.

  Craig

  No, there is no such cmdlet.

  But you can use the cmdlets Stop-VMHostService and Set-VMHostService .

  Something like that

  Get-VMHost | Get-VMHostService | where {$_.Key -eq "vmware-webAccess"} | `Stop-VMHostService -Confirm:$false | `Set-VMHostService -Policy "Off" -Confirm:$false
  

  First the vSphere Web Access service is stopped, and then the service policy is set to 'Off', which means that this service is not started after the next reboot.

• How to remove orphaned lots VMs

  I had a lot of virtual machines created by some automatation tools - about 60 of them. And this is atrocious to manually remove all one by one from the vcenter inventory. Is there an elegant way to do this?

  Thank you

  Here's a vSphere SDK for Perl that is just that - http://communities.vmware.com/docs/DOC-10190

  The script basically goes through your inventory VM together looking for virtual machines with a State labeled "Orphan" and remove