Remove the 2 GB windows ISO file after I burned the dvd of windows 8 pro?

Similar Questions

• If I remove the DVD I imported the files from, some regions begin to disappear

  So, I worked on a project and I'm pretty new to first. The problem is that if I remove the DVD in the PC, first says there are missing files and it will not show anything from the parts that I imported the DVD. He said something like "media disconnected".

  How can I solve this problem? I hope I was clear enough, sorry, English is not my mother language.

  Thank you

  Media not really matter in first.

  Copy dvd to hard disk, and then bind again to these files.

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• Decode the error in the output to the file for later burning to DVD

  I have a MPG file in Ulead Media Studio Pro (what's more, I can run because it does not work on Windows 7 using my new PC).  I have created a new project in PE9, added the mpg, dragged to the timeline and said first file to change the project settings to match. It is now PAL DVD top field first.  There is no red line on the timeline above the clip.  When I try to print to a file for later burning to DVD, I get an error of decoding around a particular frame.  When I go near the image in the monitor window and step forward to an image both that it moves smoothly until it gets on the framework in question when there is a noticeable delay to press on the arrow and the time counter updating to next chassis number.  The MPG plays well in Windows Media Player and VLC player - it shows a melted transition crossed to the place that fails in PE9.  Can I do to solve this problem?  I have no software authoring otherwise independent DVDs that would be an option.

  It's only a guess, but it seems that there is something wrong with the structure at that time MPEG GOP.

  There are several freeware software DVD that run under Wn7, by this RESEARCH. I never have used any, as I have Adobe Encore, but he is now only available in Premiere Pro.

  If Ulead worked well with this MPEG file, it is either compatible DVD or Ulead is more lenient than for the PrE. Software Adobe aren't just leniet, because the output is very strict. Some programs, not so much.

  Others that eventually make a cut at each end of the crossfade and leave in the form of a cut or shorten the two scenes on each side of the deleted passage and another application, I can't imagine a way to "clean up" the part of the MPEG.

  Sorry, but good luck.

  Hunt

• Is it safe to remove the original on my HHD files after I burned them to a DVD?

  This may seem a simple question for some of the pros, but I almost had my finished project.

  I need to know if after I save my Master project on a DVD can I remove my HHD files and use the project saved on the DVD to edit future work?

  I guess what I'm asking is if the DVD needs the Max code, or backup the files on my HHD to make it work.

  I used Nero8 to burn it on a Standard DVD. The time is 104-minute HD files that I took using mini cassetts.

  The DVD does not work on my DVD player, but I still need to add menus and do some last minute touch ups.

  I was hoping to clean my HHD to the previous (over a year) worth of files and pieces.

  Thank you once again.

  Jim

  zjimbo:

  To the video production company, I work for, we tried several forms of backup. In my opinion, a backup on DVD without danger can best be put in place by the first open the project you want to save in the first.  Then go to the Project menu. From the Project menu, select Project Manager. Once in the project manager, create a copy full of your project to one of your internal hard drives. First place this copy in a folder and it will contain everything you need to reopen the project and change it at a later date. Before you burn discs, first open this project copied, just to make sure everything is right. Burn the entire file that was exported from the DVD project manager. That someone else has suggested, make some copies. Use good quality DVD discs.  The guy to the duplication House we recommend Verbatim. It also recommends that you do not use the Memorex discs.

• Reactivation of XP after removing the DVD drive

  I just removed my active computer DVD player. Why he told me that I have 3 days to reactivate when I rebooted?

  The DVD player is one of the pieces of equipment used to identify your computer.  Removal or replacement of this device could trigger a need to reactivate Windows.  For more information, see this article:

  "Windows Product Activation (WPA).
    <>http://www.aumha.org/win5/a/WPA.php >

  HTH,
  JW

• How do you remove 2d copy of window XP Pro in bootcamp without damaging original XP Pro and data?

  Window XP pro in Bootcamp is size of 25 GB of Fusion Activated. By mistake, have also a second copy of Windows XP in Bootcamp is 5 GB. The two files are .vmwarevm. Lack of disk pace only allowed 32 GB size. Must remove copies of 5 GB of Window XP without original damaging with application and data window (25 GB). Error message "Sorry the operation cannot be completed because an unexpected error occurred (error code 1407) when you try to move to the trash. Help

  You must come to my Guickbooks and payroll.

  BillPTC wrote:

  Copyied the grazing of Window XP Pro.vmwarevm folder of Mac, he ran, deleted Bootcamp and had a heart attack because it could not find path. My mistake that I said that I had not moved the file but went to the last and she came back.

  That mistake has nothing to do with that said vs "I copied it", "I moved it" and entry into the library of Virtual Machine that shows the error, because there is no longer the path can be removed from the library Virtual Machine.  CTRL-click on the entry for the one who does not work, then select Remove.

  I exempt backup capsal Virtial Machine time under Documents.

  It seems to work.

  I can I have copied in the wrong place because you can't see the file under user/bill/document/virtual machine/folder.

  Not sure if thi is a problem.

  Well, if you are exempted from a folder and package kidnapped virtual is not in this folder, then of course, it is a problem because the packaging of the VM get backed up by Time Machine then I suggest that you correct the situation.

  Under Capssule time I deleted backup for Fusion App in your applications because I assume that the large 27 GB file is there.

  If not, where should I go to stop the time Capsule this large file to backup every hour.

  Why the hell you would make such an assumption!  The beam of Fusion.app from VMware is separate and outside the .vmwarevm Package and files/folders are backed up by using the same relative paths because they reside on the Macintosh hard drive.  The only way that a real Virtual Machine you created would be inside the VMware Fusion.app Bundle is if you put unfairly here.  All you have to do the Virtual Machine library is ctrl - click on the target of the Virtual Machine and select Show in Finder and the ctrl + click the target Virtual Machine package and select information and look where he is.  The last part of what I just said is nothing more basic file management.

  Still no undersyand why it works without Bootcamp and be applied to run the two without having to reboot to move backward. I question the manual I was for level 1 and updated version to version 2 have to be diferent.

  You don't need to use Boot Camp in the VMware Fusion installation order and create normal file based on Virtual Machines.  Boot Camp is part of OS X 10.5 and later versions and is independent and has nothing to do with VMware Fusion, except if you also want to start the native Windows Installer on the Boot Camp partition in a Machine virtual Raw disk.  Take a look at choose settings of VM of law because it might help you understand a little more.

• How to remove the bios password on Satellite Pro 6100

  Hello
  I got this Satellite Pro 6100, I would like to install windows xp on it, somehow once I opened it, it's just a black screen with the password.
  I removed the hard drive and I was able to access it with my computer, means that the password is not for the hard drive, but rather the bios.
  What is the password of the bios? How can I reset it? I removed the Green battery which I think it is the RTC battery, it would make? How long should I wait for the settings to be reset to zero?
  Y at - it no jumpers to reset the bios... ?
  I don't know what my son used a password, so I need help with this...

  Is it possible to kill the bios settings... ?

  Thank you

  Hello

  It seems that the machine has a BIOS password. And it seems that there are only 3 options:

  1 Google for the procedure how to remove a BIOS password
  2. ask your son for the password
  3. send your machine to an authorized servicepartner and allow them to remove the password, which means that you pay money for it.

  Welcome them

• Remove the guest account Win 7 Pro desktop icons

  Hi, I got a few desktop shortcuts on my account invited which where created from my Admin account I'm having trouble getting rid of. When you are connected as a guest, I can't delete, I get the file "access is denied. You need permission to administrators to make changes. "I tried to remove the connected with the account with full administrator rights to C:\Users\Guest\Desktop, but not all of the icons where listed there.

  Widows 7 Build 7600 Pro_Ver.6.1.7600 OS

  The icons that appear on the desktop of all accounts are in the folder C:\Users\Public\Desktop.  To appear on your desktop only, not on the client desktop, login to your account and move them from this folder to C:\Users\\Desktop. Boulder computer Maven
  Most Microsoft Valuable Professional

• How to remove the keyboard on my Satellite Pro C850 - 14 c

  Hey, quick question.

  How can I remove the keyboard of the laptop inside to give a cleaning?

  Thank you.

  Hello

  I read that it is not very easy
  You will need to remove the CD/DVD drive first.
  Then, you will need to use a plastic stick to push the back of the keyboard of the ODD housing slot. The keyboard should be pushed until it lifts the corner on the upper surface of the case.
  Then using the same slice of plastic lever to insert between the keyboard and top box, then gently lift the edges of the keyboard until all locks are unlocked.

  By the way: this would be the warranty

• Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

  I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

  It seems to be a micro-fine DUST, color dark Siver.

  1. Is it debri met fans?
  2. Can I use a Microfiber cloth to remove safely? and
  3. How it is there?

  Please check, as I don't know if it's to worry about.

  Is it debri met fans?

  Yes

  Can I use a Microfiber cloth to remove safely?

  For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

  • How it is there?

    Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  

• How to remove the DVD ROM on the Satellite L300D 242?

  Hello

  my laptop (* Toshiba L300D 242 *) DVD ROM has been damaged and I have acquired a new and now I can not figure out how to remove my old DVD ROM and replace it with a new one... Please help me understand how to remove the old and replace it with a new one...
  Thank you...
  E-mail: [[email protected]]

  Agree with Feliks the ODD is secured by a screw hidden in the HARD drive Bay.
  So the HARD drive Bay cover must be removed to access this screw procedure is not really difficult, so you should be able to remove it easily.

• Satellite U500-12J - how to remove the DVD slot?

  I put a small DVD into the slot for DVDs.

  Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
  IST is possible to easily remove the whole out the small dvd dvd player?
  I'm knacked!

  I hope someone is able to help me!
  Ruby

  What Satellite you do you have?

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you