Remove the Error Messages in the content server
Hi all
In the model of my area, I'm running the code that determines if a file with a given content ID exists in the content server. The code works well, and the template renders as I expect. However, whenever I load the page, I get an error message in the content server if a file does not exist.
Here is the code I'm running inside my model that checks for the existence of the file.
<!-$dDocName = contentID & "_S"->
<!-$executeService ("DOC_INFO_BY_NAME")->
<! - $if StatusCode == 0 - >
<!-DO SOMETHING->
<!-$endif->
Can I wrap this code in that would eliminate all errors that can see the content server? Obviously, I like to keep logging turned on, but I'm a bit of a "boy who cried wolf" situation going on right now in my logs.
I appreciate any thoughts.
Thank you
Josh
In fact, I changed my IdocScript to use a different Service, GET_SEARCH_RESULTS. This Service does not throw an error if the query fails, then it will not obstruct my logs. Here is my code if someone else is looking for a quick solution of the IdocScript test if a content item exists or not.
content item exists
This is probably a rather unorthodox solution, but the simplicity of IdocScript really shines when you realize how functionally private it really is.
Thank you
Josh
Tags: Fusion Middleware
Similar Questions
-
I try to go to the website of tomtom and I get an error message DNS-cannot find server.
I try to go to the website of tomtom and I get an error message DNS-cannot find server. I tried the computer desktop and laptop and do not know what the problem is. I thought it was the Web site, but I could put my internet work top. Help, please.
How your internet connection are connected, if you use Proxy, then try to uncheck bypass for local addresses...
If you use a direct connection without proxy, even try to open in another browser, firefox IE, if its opening try to update the browser to your desktop computer.
Thank you & best regards
Alex k
-
Hi all
I am facing the error when I open my ADF UI below. I had installed all the required patches on weblogic ADFUI and MLR - 6 patch for COE. It's the same error discussed in this thread -
but I think have everything installed the patched. Y at - it a particular fix that brings FrameworkFolder from 2.0 to 2.1.< 24 April 2015 18:11:26 IST > < error > < oracle.wcc.adf.logger.Exception > < WCC-ADF-10900 > < required feature is not enabled on the content Serv WebCenter
ER instance "Default". Feature: 'FrameworkFolders', at least level: 2.1
oracle.wcc.adf.model.WccException: WCC-ADF-10900: necessary feature is not enabled on the content server instance 'Default' WebCenter Feature: "setting
orkFolders's, at least level: 2.1
Kind regards
-Anand
I assume that you missed this step:
1. after changing properties of connection CRMI - save
Now comes the key:
2. Select the bean Select viz ADFConnections - operations - parent. Here, select Invoke.
The action is logged and persistent changes to the MDS repository on successfully executing step 2, otherwise the changes will not be saved and will be reset to restart the server after original values.
Now restart the servers of the ADF managed, test and report the results.
Thank you
Srinath
-
Good afternoon
I have an installation of WebCenter Sites on a CentOS server with Weblogic application server. Is connected to a database of 12 c of Oracle database.
I do deploy automatically on the server through a shell script which is called by Jenkins.
He liked to set up something similar to that described in the Oracle documentation .
# Reinstall ContentServer to start with a clean slate.
# Possibly ignore this and just do an update
Reinstall_CS)
# Bring in the latest sources from SVN
SVN_Update () - done
# Prepare for importation: compile all Java code as editors/workers and flex of url filters, etc..
# Prepare the database with custom settings, etc.
preImport)
# Run the sequence of import TDSB
CSDT_Import () - done
# Run the test suite - mental health, performance, acceptance tests
runTestSuite)
# Report results to the team by e-mail so that they know about any failure of a first thing in the morning
runReports)
Does anyone know how can I automate the re-installation of the content server?
Thank U.
Hello
To reinstall, you will first need to uninstall the Sites and then re-run Setup.
To uninstall, you will need to:
- Cancel the deployment of CS and case applications
- Remove the installation directory
- Remove the shared directory
- Delete the directory (i.e. CS and CA applications) manual-deploy
- Remove Sites (or just drop and recreate the schema).
I hope this helps.
Kind regards
Stephan.
-
Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?
I have a setting wrong?I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...Any help would be much appreciated.Hi Richard,
Thanks for posting your question on Microsoft Community!
I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
I hope this helps.
-
Version of the content server and build the relationship?
When you look at the version on a content server you see for example build v5.3 3529.
But the software versions are marked: v5.3.0, v5.3.1, v5.3.2.
What version of these 3 versions? I can't find it in the available doc.
Rgds, Geert.
I don't know why they changed the version posted on the content server to use the main exit S5.3 and then the build number, but still the free software download you is different. I can say that S5.3 build 3529 is F5.3.2, do not know what other build numbers are however for S5.3 and S5.3.1.
-
How to send the email from the content server?
How to send the email from the content server? Is this enough to configure the SMTP server with the content server oracle? I want to send a mail generated both system admin system and author of the content when a content is expired. Please suggest how to enable e-mail functionality. Please suggest how the mail will be sent both SYSADMIN and author.
Thank you
In particular, this can be achieved by configuring - see EnableExpirationNotifier
-
Maintaining the structure of folders in the content server
Hello
There are times when we have a .swf object and associated xml files in a particular folder structure and we need to keep that in the content server because it will be internal references.
Is there anyway where we can store the folder structure in UCM paths and use as /images/test.swf instead of the url httprelativewebroot.
Thank you
JohnI think there are two ways that you could do this and basically what it is is what Jason says - if you make sure that they have type corresponding doc, group security and/or account, they will be in the same folder.
An idea - you can use WebDav and setup a contribution with these predefined metadata folder. Then it would be just a drag and drop or copy / paste just like on a network drive. All files/folders that you copy to this folder of contribution should be labeled with the same info and have fallen into the same folder.
Just a thought... hope that helps, and I'm not far away from the base.
-
during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?
Thank you for visiting the Microsoft answers community.
The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.
This means that all that he says. Your Windows system has an address that already exists on your local network. Turn your system off and use a working system to locate this address and to which unit he belongs. In most LANs, the router's DHCP server. You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.
Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system. You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.
-
Original title: how to pass the login prompt Classic at the Welcome screen to logon for windows xp professional
WHEN I TRY TO ACTIVATE THE LOG-IN WELCOME SCREEN, I GET THE MESSAGE "SERVER FOR NETWARE CLIENT HAS DISABLED ABILITY TO FIX THS PROBLEM UNINSTALL"SERVER FOR NETWARE CLIENT"IS THE ONLY CHOICE THAT I COULD FIND ON DISABLE NOT UNINSTALL." Help, please
Hi BobbyQE,
Follow the steps in the article.
Error message when you try to turn on welcome screen or Fast User Switching
-
Remove the ISE server certificate EAP
I installed the GoDaddy server certificates on all my 1.1.1 ISE nodes, but customers are still getting the error and accept certificates. I would just remove EAP certificate and not use any certificate for EAP.
Explain the problem more in detail. You try to use the comments or 802. 1 x. There are many protocols of authentication you want to use EAP. TLS and PEAP require the use of the cert. What you are trying to accomplish and what are the issues?
Jim Thomas
Cisco Security course Director
Global Knowledge
CCIE Security #16674 -
The content Server could not process the request == >; on model click URL Href
Hi Experts,
I created the Article active template and get the url for the same using the tag
====================================================================
< render: gettemplateurl outstr = "articleTemplateURL" c = "CompetencyArticles" cid =' < % = ics. GetVar ("competencyidop") % > ' tNom = "DetailArticle" ttype = "CSElement" >
< / render: gettemplateurl >
====================================================================
However when I click on href I get ""Content Server could not process the request "error... "
(1) there is nothing specific to this error in the server logs.
(2) in the access logs I get == > GET/cs/Satellite? c = CompetencyArticles & cid = 1425306988875 & pagename = skills % 2FCompetencyArticles % 2FDetailArticle HTTP/1.1 "403 44
Help appreciated.
Kind regards
GP
Can you switch model usage to disposal and try again?
Phil
-
Creating the content server folder
Hi Experts,
I was exploring Content server as we have obligation where we want our data to be stored / version / wanted.
For this we have designed WebCenter Content server.
Could you please tell me how to do records / groups / users.
I went through the help of the tool itself and other docs, but do not get exactly how to achieve this.
Even I made records and pages (by going to the admin-> Web Layout Editor applet) but unable to find them.
Thank you
VikasThis time, you'll have to explain what exactly you did when you say "archived and exported." Steve H. does point out many different methods archives here:
http://senasystems.blogspot.com/2012/04/replication-between-content-server.html
Again, I think you should hit the books and to understand what exactly are the expected behavior of your attempts. If you use only the FolderArchiver, then you will only move the folder structure. The content will not be moved as well. The documentation covers a number of migration & replication (docs related to the above article) strategies.
For your descriptive case, you need to move files & content at the same time.
I'm not sure of the home page, but maybe the ExtranetLook component has been activated? I think that this affects the page portal.htm as well as a few other basic behaviors. If this is the case, Please remember to read the description of all components (on the page of the component to the server admin & in the docs). Enabling unnecessary components can cause some events that are not easy to remove.
-ryan
-
Deselect the option after that move will remove the content!
Hello!
I have a huge problem with the Selection tool and I need to know how to solve this problem, because it totally destroyed my workflow. (Photoshop CS6)
If I move the contents of a selection and deselect an item, it removes the part that I've deselected. How can I disable the which?
I want photoshop just to deselect my selection without deleting anything, so I can continue to go the rest of my selected contend.
Greetings Legolars
Edit:How to reproduce the error:
1. Select a part of your image
2. use the tool move and move the selected content
3. switch back to the selection tool and now start deselect items in the selection
3.1. This will remove her are deselected, which I don't want to happen!
Well, that makes sense, and I can see how that would be frustrating.
As is the way recommended for the tool to operate, I can only offer you with a bit of a hack:
If you temporarily add to your selection, and then remove your new selection, as well as the rest of the selection, it won't clip pixels wide.
PS: this GIF is animated.
Maybe you are looking for
-
How can I delete downloaded emails stored in my profile of IMAP accounts that are closed?
Can I simply delete the directory of imap.googlemail - x.com and the file associated with msf? I use a MacBook Pro with the Mavericks and Thunderbird 31. Thanks for the ideas.
-
I have a computer. Sometimes I can't open without a lot of effort. But it is not completely closed, because suddenly opens again.
-
Qosmio G30 - Media center remote control does not work in windows
Dear all, I have a Qosmio G30-194,first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly. I tried a full system recovery DVD re
-
Satellite M60-148, vodafone mobile connect card
Unable to connect a vmcc vodafone mobile connect card to my satellite M60-148 (new model 17'). OK for the software, ok for the vodafone window, but could not get the window with the PIN code. The same card vmcc works with my old toshiba laptop satell
-
Problems with my Cliq... 'happenings', etc...