Creating the content server folder

Similar Questions

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Maintaining the structure of folders in the content server

  Hello
  There are times when we have a .swf object and associated xml files in a particular folder structure and we need to keep that in the content server because it will be internal references.
  Is there anyway where we can store the folder structure in UCM paths and use as /images/test.swf instead of the url httprelativewebroot.
  
  Thank you
  John

  I think there are two ways that you could do this and basically what it is is what Jason says - if you make sure that they have type corresponding doc, group security and/or account, they will be in the same folder.

  An idea - you can use WebDav and setup a contribution with these predefined metadata folder. Then it would be just a drag and drop or copy / paste just like on a network drive. All files/folders that you copy to this folder of contribution should be labeled with the same info and have fallen into the same folder.

  Just a thought... hope that helps, and I'm not far away from the base.

• Version of the content server and build the relationship?

  When you look at the version on a content server you see for example build v5.3 3529.

  But the software versions are marked: v5.3.0, v5.3.1, v5.3.2.

  What version of these 3 versions? I can't find it in the available doc.

  Rgds, Geert.

  I don't know why they changed the version posted on the content server to use the main exit S5.3 and then the build number, but still the free software download you is different.  I can say that S5.3 build 3529 is F5.3.2, do not know what other build numbers are however for S5.3 and S5.3.1.

• WCC-ADF-10900: required features are not enabled on the content server instance 'Default' WebCenter Feature: 'framework orkFolders', Minimum level: 2.1

  Hi all

  I am facing the error when I open my ADF UI below. I had installed all the required patches on weblogic ADFUI and MLR - 6 patch for COE. It's the same error discussed in this thread - required feature is not enabled on the content server instance 'Default' WebCenter Feature: 'FrameworkFolders', at least level: 2.1 but I think have everything installed the patched. Y at - it a particular fix that brings FrameworkFolder from 2.0 to 2.1.

  < 24 April 2015 18:11:26 IST > < error > < oracle.wcc.adf.logger.Exception > < WCC-ADF-10900 > < required feature is not enabled on the content Serv WebCenter

  ER instance "Default". Feature: 'FrameworkFolders', at least level: 2.1

  oracle.wcc.adf.model.WccException: WCC-ADF-10900: necessary feature is not enabled on the content server instance 'Default' WebCenter Feature: "setting

  orkFolders's, at least level: 2.1

  Kind regards

  -Anand

  I assume that you missed this step:

  1. after changing properties of connection CRMI - save

  Now comes the key:

  2. Select the bean Select viz ADFConnections - operations - parent. Here, select Invoke.

  The action is logged and persistent changes to the MDS repository on successfully executing step 2, otherwise the changes will not be saved and will be reset to restart the server after original values.

  Now restart the servers of the ADF managed, test and report the results.

  Thank you

  Srinath

• Reinstall the content server

  Good afternoon

  I have an installation of WebCenter Sites on a CentOS server with Weblogic application server. Is connected to a database of 12 c of Oracle database.

  I do deploy automatically on the server through a shell script which is called by Jenkins.

  He liked to set up something similar to that described in the Oracle documentation .

  # Reinstall ContentServer to start with a clean slate.

  # Possibly ignore this and just do an update

  Reinstall_CS)

  # Bring in the latest sources from SVN

  SVN_Update () - done

  # Prepare for importation: compile all Java code as editors/workers and flex of url filters, etc..

  # Prepare the database with custom settings, etc.

  preImport)

  # Run the sequence of import TDSB

  CSDT_Import () - done

  # Run the test suite - mental health, performance, acceptance tests

  runTestSuite)

  # Report results to the team by e-mail so that they know about any failure of a first thing in the morning

  runReports)

  Does anyone know how can I automate the re-installation of the content server?

  Thank U.

  Hello

  To reinstall, you will first need to uninstall the Sites and then re-run Setup.

  To uninstall, you will need to:

  1. Cancel the deployment of CS and case applications
  2. Remove the installation directory
  3. Remove the shared directory
  4. Delete the directory (i.e. CS and CA applications) manual-deploy
  5. Remove Sites (or just drop and recreate the schema).

  I hope this helps.

  Kind regards

  Stephan.

• How to send the email from the content server?

  How to send the email from the content server? Is this enough to configure the SMTP server with the content server oracle? I want to send a mail generated both system admin system and author of the content when a content is expired. Please suggest how to enable e-mail functionality. Please suggest how the mail will be sent both SYSADMIN and author.

  Thank you

  In particular, this can be achieved by configuring - see EnableExpirationNotifier

• Remove the Error Messages in the content server

  Hi all

  In the model of my area, I'm running the code that determines if a file with a given content ID exists in the content server. The code works well, and the template renders as I expect. However, whenever I load the page, I get an error message in the content server if a file does not exist.

  Here is the code I'm running inside my model that checks for the existence of the file.

  <!-$dDocName = contentID & "_S"->

  <!-$executeService ("DOC_INFO_BY_NAME")->

  <! - $if StatusCode == 0 - >

  <!-DO SOMETHING->

  <!-$endif->

  Can I wrap this code in that would eliminate all errors that can see the content server? Obviously, I like to keep logging turned on, but I'm a bit of a "boy who cried wolf" situation going on right now in my logs.

  I appreciate any thoughts.

  Thank you

  Josh

  In fact, I changed my IdocScript to use a different Service, GET_SEARCH_RESULTS. This Service does not throw an error if the query fails, then it will not obstruct my logs. Here is my code if someone else is looking for a quick solution of the IdocScript test if a content item exists or not.

  content item exists

  This is probably a rather unorthodox solution, but the simplicity of IdocScript really shines when you realize how functionally private it really is.

  Thank you

  Josh

• Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Generate image (for iOS app) in assets could Photoshop create the contents.json file at the same time?

  Hi iolnation,

  I'm sorry, but currently there is no such feature available in Photoshop.

  However you can surely place the feature request here: Photoshop community customer family

  Concerning

  Jitendra

• the images are no longer appearing after that I created the test server

  Hi, I'm working on a php site. When I import images files appear regularly in the design window and when I saw witg F12. But once I created the Test Server that they no longer appear. No idea why?

  Hi libdaciu,

  Try to remove the first slash to source path. Update the path of the CBC to src = "gimgs/fandick.png"

  Please try this and then let us know.

• create the SQL server programmatially data source

  Hello

  I would like to create a SQL server by programming in LabVIEW data source. The SQL server version that I used is from 2005. Can someone give some ideas? An example of code will be more favorable.

  Thank you

  Jane

  You can build the connection string you even.  The open function in the Toolbox of data base accepts a string as well (it's polymorphic) who can be the connection string.  This is the site I use to understand.  Is the most common things.  You may need to search Google more specific elements.

  http://www.ConnectionStrings.com/

  If you want to use the other option, someone has achieved a UDL editor in LabVIEW.  You can use this code to create your own UDL which can use the Open DB function:

  https://decibel.NI.com/content/docs/doc-18613

  I have used the above code, so can't comment on that.

• The content Server could not process the request == &gt; on model click URL Href

  Hi Experts,

  I created the Article active template and get the url for the same using the tag

  ====================================================================

  < render: gettemplateurl outstr = "articleTemplateURL" c = "CompetencyArticles" cid =' < % = ics. GetVar ("competencyidop") % > ' tNom = "DetailArticle" ttype = "CSElement" >

  < / render: gettemplateurl >

  ====================================================================

  However when I click on href I get ""Content Server could not process the request "error... "

  (1) there is nothing specific to this error in the server logs.

  (2) in the access logs I get == > GET/cs/Satellite? c = CompetencyArticles & cid = 1425306988875 & pagename = skills % 2FCompetencyArticles % 2FDetailArticle HTTP/1.1 "403 44

  Help appreciated.

  

  Kind regards

  GP

  Can you switch model usage to disposal and try again?

  Phil

• Record to create the content reference

  I recorded a component using the wizard of registration of the application designer. But the page doesnot appear in the screen online. So I tried to create the reference to the content of the "PeopleTools-> Portal-> Structure and content' navigation menu. It indicates that the component is already available. If it is already available, why would he post in online. Is there any cache to be refreshed?
  
  Sometimes, I noticed the page appearing online after a couple days of registration. How this register and its contents reference books. Any document on that would be helpful.

  1. check if you have access to the component through permissions list.
  2. the menu is cached by the web/application server and your browser. There are a few things you can do to force a refresh - a. Remove caches of web/app servers and b. CTRL-F5 to refresh the browser or c. change the cache of web server profile settings to not put caching objects portals (recommended for dev environments where the portal changes are common).

• Error 1317 on mini 110-3530 can\ ' t create the office installation folder. No way.

  Windows of HP mini 110-3530nr 7

  layout Error 1317 when installing Office 2010. Apparently the path does not exist.

  Thank you

  Bill

  Hello

  This is due to access rights. Please check the answer from following link:

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/error-1317setup-cannot-create-the-folder-during/9063e10c-22E1-4e7c-AB14-6e45a2b514e6

  Kind regards.

• Bigger than the content documents folder

  My Documents folder shows that it contains 10 GB of data, but when I select all content (files and folders), I go out only 0.5 GB (I do not use this file, this is why it must not contain a lot). I put that it must show hidden files, too, but he has not shown any additional things. How is this? I use SSD, so this difference is crucial for me.

  All the already compressed files? In Windows Explorer, the compressed files are normally displayed in blue. You may also right-click on the file and select Properties. On the general tab, you will see the dimensions that match what is listed in the Discover Windows Explorer detail and size on disk, i.e. after the file has been compressed.

  During the reconciliation of disk space in Windows Explorer, you may experience a number of problems. File compression is a. The System Volume Information folder is another that she, she does not display the disk space used by the content of the folder, which can be considerable. You can also meet with a number of programs that hide the folders / files, which are not revealed when 'Show hidden files' is selected. Norton has adopted this procedure with Norton Protected Storage, and others followed.

  To study disk space, use download and install Treesize (freeware).
  https://www.Jam-software.de/customers/downloadTrial.php?ARTICLE_NO=80&language=en&PHPSESSID=6odgempt76un9q9nkj7luf5be0

  Information about Treesize
  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files. Display names and 6 larger files sizes and the total at the top of the list.