Remove the login screen (which started after reinstall)

Similar Questions

• How to remove the login screen. I removed the password and always get log on screen. How can I return to boot to the desktop?

  I have temporarily protected password and have since removed the password to none. I always get the log on screen, while it does not require a password, I would like to remove all together and just boot the desktop, with no sign of user in.

  Click Start and in the search for box netplwiz type press enter.

  Uncheck users must enter a user name and password to use this computer.

  Click apply.

  When the automatically log on dialog box appears, enter the user name desired for automatically to connect to Windows 7 with. Then enter your password. If your password is blank then leave these fields empty.

  Click on OK.

  Let me know if you need more assistance.

  -Josh

• every day computer requires me to take to remove the data screen and start Recovery

  Hi I actually had this problem for many years. I have an emachines t5052 deskop with about 1 GB of ram and a 100 GB hard drive, I got upgradedto windows vista and the computer screen would be just black when I went back to it. so I have to unplug the unit twice for deleting system restore data and screen start option making this option would start the computer for vista. recently, I did a clean install of windows 7 32 bit and was hoping id never have to deal with this again but I still have to and seems to be worst im running norton 360 and have all the updates. How can I solve this ive already tried sfc/scannow, he said all the files the integrity

  Try updating the chipset and graphics drivers. If no update is available, uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.

  Answer if the problem persists.

• HP625 the on-screen display missing after reinstalling the operating system

  Recently, I completed a new installation for Windows 7 x 64. Previously, I had Windows 7 x 86 which I completely wiped out. The problem is now my screen display is more working.ie. No volume control, no screen display setting of brightness, no bluetooth switch or wifi enabled, no display to indicate that when I connect to a projector or during prolonged use of screens.etc. can someone help me please on how I can get this software again on my machine. I tried to look around on the internet. Any help in this regard is highly appreciated.

  Thank you

  Yes! Found the solution, all that was required was to install hotkey support to the HP625 and other related models. To install, use the following link: HP hotkey Support

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=321957&prodSeriesId=4173277&prodNameId=4173278&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-90952-1>

• Why does the login screen Windows continue reappear on my monitor?

  I use Windows 7 Pro.  Until a few months ago, I couldn't leave my desktop PC on overnight.  As soon as I sat down and moved the mouse or tap a key on the keyboard, my screen saver would disappear and I could go right to work.  It was great!  Several months ago, a problem started that I describe.

  Now, when I walk away from my PC for a few hours and return, I see the Windows login screen.   It is not all the time, but it produces most of the time.   My first step in tackling the problem was to check the settings of the screen Setter.  The bomber of the screen ("ribbons") is supposed to go after 12 minutes of inactivity.

  There is a box to the right of this setting that says 'On Resume, display the login screen'.  This box is averified.

  Then I adjusted to High Performance power settings.  PC display is Never set for when to turn off the screen and also never to when putting the computer to sleep.   I then changed the advanced power settings to try to remedy the problem.  I made sure the following settings are the following:

  High Performance requires no password on wake up.

  Turn off the hard drive at the end of 800 minutes

  The sleep settings:

  Sleep after = never

  Allow hybrid sleep = Off

  Hibernate after = never

  Enable timers wake = Disable

  Turn off the display = never

  Power button: Sleep button Action = Nothing

  For security reasons, I usually use my PC as a standard user.  But the login screen Windows guard reappear after I leave my PC for a while if I run as a limited user or administrator of the master.

  Can you give me some additional ideas on what I can do to remove the login screen Windows reappear after I leave my PC?

  Hello

  Thank you for your reply with the requested information, sorry for the delay in response.

  I suggest you follow the steps below:
  1. on your desktop "Windows + R" screen press button together press
  The Board of Directors.
  2. in the command box type run 'control userpasswords2' click OK.
  3. uncheck the box for "users must enter a user name and password
  This computer '.
  4. change the screen saver 'Ribbons' to something else for example
  'Bubbles '.
  5 restart the computer.
  Now, check if the problem reappears.
  Hope this helps, please answer with the results for assistance.

• After that windows update computer now hangs at the login screen, no error message, just restarts.

  I have tried safe mode, does the same thing; tried to use the Windows Vista disc to do a repair, no luck; also I tried restoring the system (from disk), no restore points however.
  The problem appeared after restarting the computer during the night.  The problem began to be able to connect, but the screen would go blank with just a pointer (KSOD).  Has tried some of the suggestions on this problem, including by eliminating sys newspapers, which did not work as well as reinstalling the video driver, with no luck.  Finally tried a system restore, returned 1 week (before the windows updates).  Now, the computer becomes just the login screen sits there for about 5-10 seconds then restarts immediately.

  I just had this happen to my laptop that has no external references. This is a new (September 09) ASUS K50ij with Vista 64-bit installed. I bought the Win 7 OS to replace, but have been waiting for the time to play with it... Last Monday, the update itself and invited to restart so I have done what I was busy with and enabled him to restart which is the only thing to do now... restart, the blue screen for a nano-second, then restart... etc. Same problem with safe mode and safe mode with networking, or with the box... anyway, someone very smart recommended that I use another computer (Fortunately, I have several) to download free Imgburn (which works easily), then get Ubuntu (Linux Operating System free download) burn image from the Ubuntu disc, put the disc in the drive of the computer crashed (there is a little hole next to the button you) can insert in a safety pin to release the door when the power is off) change the setting in the BIOS of the computer has crashed by restarting and pressing F2 until you get the menu BIOS... go to the start menu and choose Start from the CD, and then press ENTER. When the computer starts, it will see the drive and go to a menu to select the language, then next choice is "try Ubuntu without making any changes to the computer. It will boot the disk and allow you to view and copy ALL your files off the power on an external drive, which is what I did... including my Outlook .pst files that include all my saved emails my calendar and contacts, etc! WOOHOO! has got all my photos, documents, etc. The only thing that I didn't know how to get is my favorite... How to enter in the browser from another computer.

  If after this, an hour or more than make sure I got all the important data... I decided to see if anyone had a solution to this problem just fixing... I probably won't update again because Microsoft sends them and offers no solutions to the problems they have caused and nobody pays me for all the time I've lost get to get my stuff back and also to solve the problem they have caused. A update on my other laptop Win 7 zapped my outlook program and even reinstall it didn't solve this problem, even more work to do there, but looking in the files using Ubuntu's File Explorer, I found a hidden file that is used to repair the files .pst outlook called scanpst, or something that nearby.

  In any case, if someone has a solution to uninstall the recent update or to determine how it corrupted my user profile (which is the general consensus) please let me know.
  Thank you and good luck to you!

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• For some reason any, that I can't start MSN Messenger, I can start Mail but Messenger crashes just on the login screen.

  MSN Messenger problem

  For some reason any, that I can't start MSN Messenger, I can start Mail but Messenger crashes just on the login screen. This is really weird, what's happening on Vista laptop myt so after what happens for about 3 days, I tried my computer running XP, it's same thing. Help me please!

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

• Password changed after you disable the login screen

  Then I disabled my login screen, today and now when I start my computer, it brings me to a page that said 'incorrect password' and then returns to the login screen. Then when I enter my password it does not work. It seems that my password has been changed somehow when I disabled the login screen. In the meantime I can use my fingerprint reader to log on, but if I were to ever lose a finger in the future I wouldn't be able to access my computer. So, how can I reset my password?

  Curiously the admins cannot change her password without having to type the current password, but they can change the password of any other account without knowing the password.

  Not true - see here:

  1. click on the start planet.

  2. type the three letters cmd in the search box.

  3. press on Ctrl + Shift + Enter

  4. click on "run as Administrator".

  5. type the following commands and press ENTER after each:

  NET user "Zach" 123456
  The command above will set the password of the account selected to 123456.

• Mac does not start at the login screen

  I have a Macbook Pro (15-inch, mid-2014) that will not stat upward, toward the top of the login screen.    It starts in a circle with a line crossing.

  It has a processor Intel i5 with 4 GB of memory and 256 GB of Flash storage.

  The Macbook Pro is on OS X 10.10.5... Yosemite.

  I tried to start it in safe mode by pressing on * during the shift and no resolution.

  Can someone help me?

  You have a good backup?

  Try restarting your recovery volume. Follow the directions for your problem.

  On the screens, you see when you start your Mac - Apple Support

• How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  original title: Bing appears when I start firefox

  Hi RowingRVer,

  ·         The issue is only with Firefox?

  ·         What are the States of pop-up message?

  You can try to use Internet Explorer and check to see if the problem still persists.

  If the issue is only with Firefox so you can contact Firefox Support for assistance.

   

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  Let us know the results.

• I just need to learn how to change the color/design of the login screen I have to cross when my computer starts.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When you install Windows Vista, I accidentally jumped on the color/design change to the login screen where I have to type my password to access my office and other files.

  How to retrieve and change the color/design of my Windows Vista login screen?

  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/

  Read the information on the above link to what you want to do.

  See you soon. Mick Murphy - Microsoft partner

• Can't get to the login screen after upgrade

  Hi team,

  I just finished a redeployment of last August release of 12.2 on an existing version of 12.1 HUB by following the instructions in the guide section upgradepolicy private cloud automation.

  The redeployment process completed without problem informing me that the schema and execution deployments have been all updated.

  Unfortunately now I can not log on the hub, all existing users cause the login screen reload showing no error.

  Note: If the user name or password is incorrect an error is returned.

  Users can connect through OPM without problem.

  I tried to reset the passwords, nothing helps.

  Any help that can be made will be very appreciated.

  See you soon

  Ben

  This sounds like the secure session cookies have been enabled (it is by default) - you use HTTPS?

• Keyboard & mouse not working not not at the login screen.

  I have Windows7 64 bit installed on my machine. I can't use my keyboard and USB mouse to the login screen. I tried to boot the system in safe mode, but I am facing the same problem here. When the login screen if poster my keyboard freezes and if I press num lock does nothing. My mouse stops on the login screen. I don't want to reinstall windows as it will scan all the settings I have on my machine. Is it possible to solve the problem without having to re - install windows. I tried to fix the problem using my installation disc, but I couldn't find the solution.

  Hi Philippe,.

  I suggest you to disable and re-enable the USB controller and check if it helps.
  
  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.
   
  To disable and re-enable the USB controllers, follow these steps:
  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note that you have to scroll down to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.
   
  Also, try updating the chipset drivers on the computer manufacturer site.
   
  Thank you.