Remove the NIC of the virtual machine running?

Similar Questions

• Looking for lists of the virtual machine running on the power of cli ESXi host

  Hello

  I want to export the virtual machine lists running on the respective host in a cluster, but it generates the error after running the command.

  Get-Host esx011 | Get - VM

  PowerCLI C:\ > esx011 get-home | Get - VM

  Get-Host: A positional parameter cannot be found that accepts arguments

  'usjacpvesx011 '.

  On line: 1 char: 1

  + esx011 get-home | Get - VM

  + ~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (:)) [Get-Host], ParameterBindin)

  gException

  + FullyQualifiedErrorId: PositionalParameterNotFound, Microsoft.PowerShell

  . Commands.GetHostCommand

  No idea where I need to correct. I want to export to csv

  Thank you

  vm2014

  What should we not Get-VMHost?

• Call recording on the virtual machine running on Cisco UCS

  We evaluate the requirements for implementing call recording in our environment. Ideally the call recording server to run as a virtual machine on an ESXi host running like a blade on a Cisco UCS. I know that I need to set up RSPAN between my physical switches and turn the "Promiscuous" mode on my vSwitch which would be connected to the virtual machine. Where I'm stuck, how the NETWORK adapter that is connected to my vSwitch would be able to sniff this traffic? Are there requirements when I implemented the vNIC on the UCS or VMWare or under the physical being connected to the span port card desired traffic will get to my VM as a controlled traffic?

  Thank you.

  No we are not running Cisco UCM. We have a 3rd party VOIP solution. I think I got the answer I need... we need to order a series C for our UCS Server manage the recording of calls.

  Thank you.

• Settings of CPU and memory of reserve on the virtual machine running...

  Hello.

  I have two virtual machines in production with CPU and memory settings of reservation applied as shown below. I want to adjust these settings of reservation to "zero" for the CPU and memory on both virtual machines.

  I can make these adjustments while VMS are running, or do I need to power their first?

  Any advice would be appreciated.

  Thank you!

  

  

  Welcome to the community,

  Booking of resources being completely transparent for the customer, i.e. a host function, there is no need to turn off the virtual machines. Basically all settings in are available to be changed in the editable GUI generally without interruption of service comments.

  André

• List of Cluster and the virtual machines running on this group

  Hello

  I am looking for a way to discover all of the virtual machines that belong to a cluster. In other words, I want a list that maps a cluster to all virtual machines running on it.

  In the documentation of the API, I find that "ClousterComputeResouce"has a managed object to "HostSystem" reference. "

  And "HostSystem" is a reference to managed object to the 'VirtualMachine'.

  So I can do it like this: ClusterComputeResource-> ManagedObjectRefence-> ManagedObjectRefence (VirtualMachine)-> whatever_properties_I_need_from_the_VM (HostSystem).

  However, this would cause a lot of ' Vim::get_views"calls within a"foreach"loop." It would be a deterrent to performance as the vCetner in question has ~ 50 clusters and has ~ 3500 running VMs.

  I think this was going to literally kill the VirtualCenter with so many API calls.

  My Question: is there an effective way to find Cluster and their respective VMs in vSphere SDK Perl.

  In vSphere client, we get the tab 'Virtual Machine' when we click on the Cluster and you can see all the virtual machines that belong to this cluster. So I hope that there must be an easier way.

  Thank you.

  Hello

  You don't need the host_view for this action. Why don't you use begin_entity for views of the vm?

  my $cluster = 'cluster1. "

  My $cluster_view = Vim::find_entity_view (view_type-online 'ClusterComputeResource',

  filter => {"name"-online qr / ^ $cluster / I});
  {if ($cluster_view)}
  My $vm_views = Vim::find_entity_views (view_type-online 'VirtualMachine',

  begin_entity => $cluster_view.

  Properties-online ['name']);
  foreach {$vm_ref(@$vm_views) my
  print $vm_ref--> name. » \n » ;
  }
  }

  Hope that helps!

  Greetings, Chris

• Remove a NIC vCloud several virtual machines

  Hello

  I am a vCO and extremely raw newbie with JavaScript (a great combination).  My production environment consist of vCenter 5.0, 5.1 and 5.1 vCO vCD. I have the plugin installed vCD and running with Orchestrator.  I am trying to build a workflow that removes NIC1 (NIC 1) of a series of vCloud VMs.  I took a copy of the vCloud Director Library Workflow (remove a NETWORK adapter) and edited the virtual machines of an input parameter to be an array / vCloud:VM.  I modified the taks script so that it loops through the virtual machines in the array and returns their network adapters.  It seems that the network cards are returned as a UID (I have this return to the screen via a System.Log).  This UID is obviously not with that I entered to the workflow runtime - I said "NIC 1" and my workflow will fail with an error "no primary network connection exists; majorErrorCode = 400; minorErrorCode = BAD_REQUEST; vendorSpecificErrorCode = null; (Workflow: remove a NIC 1 / remove the NIC (item0) #22) " Here is the code I use: .

  If (vm. Status! = VclVMStatus.POWERED_OFF.value) {}
  throw "VM is not off."
  }
  var found = false;
  var len = vms.length;
  for (var i = 0; i < len; i ++)
  {
  var VM = vms [i];
  network var cards = VM.getNetworkCards ();
  System.log (NICS);
  var newNics = new Array();
  for (i = 0; i < nics.length; i ++) {}
  If (. itemResource.elementName.value NIC [i]! = nicName) {}
  newNics.push (nics [i]);
  } else {}
  found = true;
  }
  }
  If (! found) {}
  throw 'Invalid NIC name';
  }
  task = VM.updateNetworkCards (newNics);
  }

  As I mentioned earlier, I am a complete newb to vCO\JavaScript and would be really grateful for some input\advice.  If there is a better method to remove the NIC 1 to a litany of vCloud VMs, or if someone has already developed a workflow for this, I would be very grateful for your help.

  Thank you

  
  

  Try this:

  var section = vm.getNetworkConnectionSection();
  System.log("Primary card was NIC : " + section.primaryNetworkConnectionIndex);
  section.primaryNetworkConnectionIndex = 1;
  task = vm.updateSection(section);
  

  He's worked here.

• Support ESXi 5.0 host FC connected tape drives in the virtual machine running symantec backup exec 2012

  Dear Experts,

  We recently purchased C0H19A: StoreEver HP 1/8 G2 6 - LTO Ultrium 6250 CF TapeAutoloader. The purpose is to backup of VMS data, I mean selected data in virtual machines, as for the exchange of data bases email for server accounts database SQL server etc.. We have a full VM backup plan, so using symantec backup exec software.

  We have this configuration:

  -TWO DL 380 Gen8 servers (running UPDATE2 Esxi 5.0), both servers have not all SCSI ports

  -One SINGLE HP P2000 G2 MSA FC Dual Cntrl storage

  -TWO HP SN6000 12 - pt Windows Pwr FC switch

  -HP ADF

  All them above are related to the CF. Symantec backup exec 2012 is also installed on Windows 2008 R2, which is a virtual machine.

  But now, we are unable to see the tape library autoloader through the virtualization layer in the device of machine Manager virtual backup exec. Reading on internet, I also found some details that connected FC tape drives are not supported by the Esxi hosts. We are really stuck in this situation, all the solutions to this. I also read the article from vmware saying configuration for Esxi 4.0 FC tape drives and later versions

  Installation of a physical server windows with Backup Exec 2012 and HBA and connected to above switches FC is the only way to see the ADF? Even after reading articles on the internet, I'm not clear, please guide what solution I have now to get this thing going, I really need to find solution to this.

  Waiting for answers.

  Kind regards

  Hello, I'm a Backup Exec support engineer and yes the method supported is only by connecting the tape drive to a server of physical media. See the introduction in the Backup Exec HCL on Configurations of http://www.symantec.com/docs/TECH175582 and http://www.symantec.com/docs/TECH146293 alternative

• In the virtual machine running to vCenter

  Hi all

  We plan to install vcenter in a virtual machine. It will be connected to a SQL Server that will also be a virtual machine.

  Everything is looking for attractive about this config but we have some questions about VUM and other patches and upgrade which will take place.

  My question are as follows:

  -If the vCenter and AUVs are virtual, what will happen during a deployment of patches for these servers?

  -Si SQL is also virtual, what will happen during the correction of the virtual server?

  Thanks in advance for any suggestion or answer

  Michel

  Uh, excuse me, but I can't quite follow your 2 questions.

  Execution of vCenter with VUM in a virtual machine is a fully supported configuration where you can enjoy features such as HA for increased availability, instant etc..

  I'm running a vCenter virtual with VUM and other optional packages of a virtual machine, 8 host management and 130 machines virtual too without any problems.

  This guide is for vCenter 2.x, apply but to 4.x for the most part too: http://www.vmware.com/pdf/vi3_vc_in_vm.pdf

• After you import the virtual machines in LM, can I remove VC

  Hello

  I had a couple of machines to import the configuration of another admin... After you import the virtual machines in LM, can I remove the virtual machines, I imported VC? I now have more need to fight them with VC. LM depends on of these always after import?

  I do not believe, but you can rename the folder and see if something is complaining.  If it isn't, it is probably safe to delete.

• IP address on the virtual machine windows endangered endangered after the importation of the data store.

  I'm gaving a problem with the IP on windows vm disappear after having mounted the snapshot to restore. Here's what I do.

  Mount making LUNS to the esx host area

  I have eyebrows outside the data store to find the vm I want to right click and click Import the vmx file.

  Imports of the virtual machine and when I start it up I wonder if I've moved or copied the VM. I have tried both moved and copy but when I connect to the virtual machine is missing all its IP info.

  Any way to avoid the losting vm sound IP info when I import to the host from a LUN outlet?

  Hello

  Installs on the forum of the Virtual Machine and the guest operating system.

  The MAC of a virtual computer is based on the UUID/name of the virtual machine so if you are not using a static MAC (one that recognizes VMware) and it will change the IP address might also change if you are using DHCP. So I suggest to use a static MAC in the VM configuration.

  Another way is to set up the guest operating system in the virtual machine with a static IP address instead of a DHCP function.

  But if you are unable to remove the virtual machine or the copy in the virtual machine, there may be something locking these files would be an another running virtual machine. If you need to find this VM and kill him. In this case, "vmware-cmd - L" and 'vmware-cmd - l' host in question can be useful to find where the 'hidden' VM is running.  Ultimately you can use ' vm-support - x "to find a list of the virtual machines running by how the hypervisor lists. Then use 'vm-support - Z' to suspend the offending virtual machine that should unlock everything.

  Yes, the use of these commands is command line.

  However, before using these commands determine if you can find the place where life VM incriminated.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Unable to start the virtual machine after Migration - ESXi hosts

  Last night I wanted to move a virtual machine to a host of test to a production cluster.  All hosts (test and production) have shared access to the same LUN, so I usually am able to simply remove the virtual machines of the inventory in the test environment and add them to the production environment by accessing the .vmx on the data store file.  Two of the 3 hosts migrate perfectly and are running in the production environment.  However, the third server, while the migration starts.

  First he gave me errors that it was missing some files.  The only thing I did was different to rename the folder for the virtual machine on the data store.  It was called 'New Virtual Machine' for a reason, so I renamed it to "Antivirus."  However, something strange happened.  Instead of renaming the folder, it seems was created a new folder named "Antivirus" and the old folder 'New Virtual Machine' was still there.  In addition, the renamed folder 'Antivirus' had only SOME of the files needed.  So I just copied from the old folder in the folder "Antivirus" and he hung up the virtual disk of 20 GB file.  So I closed the VI client and checked the vdmk 20 GB folder and back this morning is in the folder with other files.  However, when I try to start the virtual machine, I get the "cannot access a file because it is locked" error message.

  I've done some detective and I noticed that in my second datastore where was the other folder vdmk, the file was now .40kB in size.  Looks like I've lost my other vdmk folder.  What happens here?

  It looks that the virtual machine was still running when you tried to change the name, so the old folder could not be renamed because of the lock. That's why a new folder has been created instead, and why your vm hung on the vmdk file until the lock has been released. Don't know what happened to the 2nd vmdk file, but the file vmware.log in virtual machine directory must have some info as to why does not start the virtual machine. If the 2nd vmdk is gone, this might be a reason.

  -KjB

  VMware vExpert

  Post edited by: kjb007: changed vm in vmdk

• virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  When I start this virtual machine, it prompts: unable to find the 0001.vmdk, this disc is my shot, has been deleted by mistake.

  How to restore this virtual machine.

  You need help with a revival of the 000001.vmdk deleted or do you want to repair the virtual machine so that it works without the snapshot?

  The last option, follow these steps:
  remove the virtual machine from the inventory and edit the vmx file so that it uses the basedisk. Then add the virtual machine to inventory.
  If you need data from the snapshot call me through Skype "sanbarrow" - I may be able to help

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• Delete the virtual machine to the specified date

  I'm trying to write a script to remove a virtual computer on a certain date.  Currently, I want people to add this in the name of the virtual machine "VMname_Delete-/ 1/1/14", I then search for the virtual computer with:

  Get - VM | where {$_.name - cmatch "Delete-\d\/\d\/\d"}

  With that, I'm sure that the correct VM is selected, and I tested it with virtual machines to make sure.  Now comes the hardest part (at least for me), I want to take the date to which belongs the VM name, convert it to a DateTime and then compare it to the current date.  If they match, I want to remove the virtual machine.  I tried something in the sense of:

  Get - VM | where {$_.name - cmatch "Delete-\d\/\d\/\d"} | foreach {$_ .name-split "-"}

  Which of course divide the table edge, and on tests, I had an output similar to:

  VM_Delete

  01/01/14

  Of course, now I don't know how to finish the rest.  I thought that the script would be something like:

  Get - VM | where {$_.name - cmatch "Delete-\d\/\d\/\d"} | {foreach}

  If (($_.name-split «-»)-[DateTime] - game (get-date-format ' MM/dd/yy'))

  {Remove-VM - VM $_ - DeletePermanently}

  }

  I don't see the logic in my head, but of course, I just can't write they way I think it should go.  Any help is appreciated.

  Perhaps you could do something in this direction

  $now = get-Date

  Get - VM | where {$_.name - cmatch "Delete-\d\/\d\/\d"} | {foreach}

  $dt = [datetime]($_.) Name.Split('-') [1])

  If ($dt - lt $now) {}

  Remove-VM - VM $_ - DeletePermanently

  }

  }

  With the use of the index ([1]), we select the date part of the name of the virtual computer.

  Then we have "cast" the string into a DateTime object.

  Note that typeface could cause problems, depending on the culture settings you use.

  Worse, divide you the date on the character string ' / ' and then generate the DateTime object as follows

  $now = get-Date

  Get - VM | where {$_.name - cmatch "Delete-\d\/\d\/\d"} | {foreach}

  $dummy, $year $day, $month = $_. Name.Split('-') [1]. Split('/')

  $dt = get-Date-day $day - month $month-year $year

  If ($dt - lt $now) {}

  Remove-VM - VM $_ - DeletePermanently

  }

  }

• Service mgmt-vmware restart causes the virtual machine downtime

  I'm looking in the configuration of SNMP on our ESX for Solarwinds alert guests, and is the last step I have to restart the service mgmt-vmware.

  I looked around online and have been unable to find confirmation that it will not have all the time with the virtual machines running on those hosts, as production machines.

  
  We run ESX v4.1.0

  Thanks in advance.

  Hello and welcome to the Forums!

  Restart management agents will have no negative impact on your guests.