Remove the old "dump" spfile settings after the upgrade to 11g?

Similar Questions

• Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

  I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

  Boot from the Windows Vista DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  or you can try this for Windows 7:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

• The upgrade from 11g to 12 c

  Hello

  We intend to improve our databases of 11g (11.2.0.3.11) to 12 c (12.1.0.2). We would like to know what are the steps that we need to upgrade the position.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Thank you

  Dietsch.

  Hi dietsch,

  My answers are online.

  (1) all 11 g AWs automatically updated to 12 c? or do we rebuild US 11g AWs on 12 c after the upgrade? (We had to rebuild AWs after upgrading to 10g and 11g)

  The upgrade from 11g to 12 c requires no AWs to rebuild.

  (2) are there accessories performance in 12 c, which will apply to only AWS built on top of the 12 c?

  He might have a few new optimizations that have been incorporated into the version of 12 c of the AW you will not have access to until you rebuild the AW, but that does not prevent you from using the 11g version of the AW of 12 c.

  (3) we have an AW 10 g 11 g-based. Is it still compatible with 12 c AW?

  Yes, 12 c is backward compatible with an AW 10 g.

  In addition, once you upgrade it has some new features that you can use for OLAP.  The display below describe some of them.

  OLAP roadmap

  Thank you

  Ken Chin

• Remove the upgrade of Windows 10 as an optional upgrade preselected

  I don't want to upgrade to windows 10 and withdrew the notification of upgrade of the taskbar and never asked the upgrade.  Now, he appeared as an optional upgrade screened in windows update and there is no visible way to remove it.  This effectively blocks the security updates without upgrading to windows 10.  How can I get rid of him?

  Terence Kelly

  Hello

  What you need to do here first, is to change the way you receive updates. The automatic updates enabled, the operating system will reinstall the nagware guest who is KB3035583 after uninstalling a step we will take in a minute.

  Then follow these steps:

  1. Right-click the icon of the center of the Action on the taskbar and go to "Windows Update".
  2. In the left menu, click on "change settings".
  3. Change automatic updates to "download updates but let me choose whether to install them".
  4. Click "Save Changes", then "Control Panel Home".
  5. Go to "Programs and features" and click on the link "View installed updates".
  6. Copy and paste KB3035583 in the high-field search right and when it appears below, right click and select "Uninstall". It's a great Setup uninstall can last several minutes.
  7. Then restart and then go back to Windows Update again.
  8. Since you now have different parameters of WU, click on the link if there is no waiting for your approval, which will bring you to the menu where you can decide what to install.
  9. If you see KB3035583 in the list, right click and select "hide update". The box you should checkmark to select an update will turn gray and when you exit WU, these files will be sent in the repository called "Restore hidden updates". You can restore the updates that have been hidden there at any time by clicking on the link, make your selection and click "restore".

  The next step is to edit a registry that will prevent Windows 10 download and installation.

  Press the Windows key + R to start the command run, type: regedit , and then click OK.

  Navigate to: HKEY_LOCAL_MACHINE--> SOFTWARE--> Microsoft-->--> CurrentVersion--> WindowsUpdate Windows--> AutoUpdate--> OSUpgrade

  Click the OSUpgrade key (which looks like a folder), and then in the right pane you should be able to see the four values respectively called:

  AllowOSUpgrade

  KickoffDownload

  KickoffSource

  OSUpgradeInteractive

  Part or all of them will have a value of 1. You need to change those to 0 as you see in the screenshot.

  

  To change a registry value, right-click and go to Edit. In the value field below, transform figure 1 0 a

  Click OK and Windows will add the 0x00000000 (0) itself.

  If it's already a 0 then you don't have to touch it.

  In addition, you must create a value. To do this, right-click on an empty part of the right pane, and then choose new DWORD with the name DisableOSUpgrade-->.  Windows will add REG_ DWORD early, after it is created.

  If inadvertently, you lose the highlight when you create the new value, right click and select Rename.

  Then, right-click of your new value and go to edit. Change the 0 value in a 1 in the value field. Click OK to confirm and exit.

  Reboot, then go to Windows updates. You will now be able to install updates 8.1 without being hassled by Windows 10.

  Credits:Xircal , from here

• How to remove the upgrade Windows 7 Professional of D:-drive?

  I bought Windows 7 Professional Upgrade from Windows Vista Home Basic. HUGE MISTAKE! On the Microsoft Store is a nightmare. Finally, I just received a refund. Now, how do the Windows 7 on my D drive where is where idiots to the Microsoft sortore had me download in the first place. now I have vista on drive c and one broke * windows 7 on drive d. HELP, apparently, not a microsoft support t know how?

  If the Visa is still functions (you can load a running Vista), then install EasyBCD and follow the instuctions for EasyBCD listed below. When you are finished with the removal of Windows 7 in the boot (according to instructions) menu, then you can reformat the D: partition, which is where you said Windows 7 was installed.

  ================================================

  EasyBCD - how to remove the invalid entry:
  http://NeoSmart.NET/DL.php?id=1

  When you run EasyBCD, you will see the following great tabs/buttons on the left.

  (1) the display settings: displays the number of entries (bootable version valid and is no longer valid to Windows). The one marked 'default' in the version of Windows that starts if you sit and wait 30 seconds without making a selection using the keyboard. The entrance of remaining are classified by 'Name' (unless renamed all entires will call Windows 7). Drive letter represents the partition that version. If everything that you installed multiple copies of Windows 7 and Vista the path "Bootloader" will always be the same.

  (2) menu of Boot edit: four options 'Up', 'Down', 'Rename' (is very convenient if you want to see a significant name when you first start (I have 5 versions of Windows on one of my test systems, so I reamed the plain jane "Windows 7" "Windows 7 Pro 64-bit" and "Windows 7 Home Premium 32 - Bt, etc." ").)
   
  The last option is "Delete", click on the entry of is no longer valid (for highlight), and click 'delete '.

  You will also see a check mark in the "default" (when 30 timeout expires) version of Windows (vista in your case), the computer will start to place a check mark to one you want to keep.

  Located at the bottom of 'edit Boot Menu' page is the time-out value, if you want automatically to your only remaining version of Windows just place a check mark in the box "Skip boot menu."

  When your done with your changes, be sure to 'Save Settings'.

  J W Stuart: http://www.pagestart.com

• the upgrade to 11g of 10.2.0.1.0

  first of all, let me say that I am new to the role of dba and oracle.
  
  We have a hp win runing with 10.2.0.1.0 2003.
  We have a runing vista 11g for apex applications.
  
  what I want to do is upgrade HP to 11g with apex and move the DB vista in hp., so I can simplify some procsses of EDI file. and save the company money.
  
  I tried to:
  
  install new 11g to the ch, but get the error EM on the creation of ports at the end. I think that the 10g is there?
  
  Use the DBUA in the start menu of 11g. but it crashes.
  
  Thanks for your time.
  
  JP

  Hello

  You can have just a glance in the Upgrade Guide :-)
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28300/upgrade.htm#BABGAGAE
  If you have not already put your existing databases to the file version of zone 4 (patch 5632264 - TZ V4 file), you must do so before upgrading to Oracle Database 11 g Release 1 (11.1).

  This means: for all SOURCES database releases with the exception of 10.2.0.4 you will need to apply the DST time zone fixes to the definitions of patch in V4 base time zone. with catupgrd.sql or DBUA upgrade will fail with ORA-1722 - if you experience what you have not run utlu111i.sql to check your current database - he would have said to patch time zone before upgrade.

  You can consult:
  Note 414590.1: FAQ and questions
  Note 413671.1: zone V4 - check and links to patches
  359145.1 Note: links to download utltzuv2.sql
  396387.1 Note: explanations
  ........................ The timezone.dat and timezlrg.dat files will be applied
  ........................ Script used to recognize and convert data from utltzuv2.sql

  Concerning
  Mike

• menu icons is displayed is not after the upgrade to 11g

  Hi all

  I have this problem I am trying to solve and I need help for form you guyz.

  I have upgraded my custom applications, oracle forms 10 g 2 oracle fusion middleware 11 g 2 with success, but a few icons on the menu bar does not appear. Please if someone has been confronted with these and was able to resolve it should please help me.

  Thank you.

  Hi sfr.farhan.fani,

  I managed to solve the problem after having to deal with all the images in the directory/forms/java, I stopped all processes and even restart the server.

  Fortunately, it worked perfectly.

• Remove the downloaded update

  Upgrade Windows 10 has been downloaded somewhere on my hard drive. I do not want to install it. How can I know as to where it has been downloaded so that I can remove the upgrade?

  I advised my clients to doing what I've been dreading for years - disable automatic update of Windows.

  The problem is compounded by a continual road by Microsoft to install Windows 10 on your computer with your permission.  They keep re - install KB3035583 (this is the activation code) on your computer, even if uninstall you it.  The result is a huge download and then constantly nags without a way obvious to say no.

  So I advised my clients to stop WU.  Once a month the 2nd Tuesday, they will have an email to advise me to turn on the WU, then to reject specific updates as KB3035583.  After update, they will turn the automatic updates again.

  If you see the Windows flag in the bottom right of your screen, the chances are pretty high that your computer already has the Win10 file. Even if you do not, it can be on your computer now anyway.  Here are the instructions on how to get rid of it:

  It is likely Win10 has already downloaded on your PC.  If you are using windows 7 and have not installed win10 and do not, here is a procedure that I've used several times and it works.

  1. Remove Windows Update Auto - never tick

  2. Task Manager, processes, find and put an end to GWX.exe

  3. Control Panel, uninstall a program, see installed updates, WAIT until you see the green bar ends its long journey to the right

  4. Now, look for KB3035583, uninstall it

  5. Restart the PC

  6. Disk Cleanup, step 2 for system - it takes some time

  7. You should find a file which is anywhere between 4 and 8 gigabytes.  It's the downloaded Win10 file. Put a check mark on this point.

  8. OK, delete files

  9. Restart

  10. The start-up will take a while as he finished cleaning

• How to remove the repository 11g CAD

  Hi gurus,

  I did a new DAC 11 g install and after that, I realized that I have to install DCA 10 g and then switch to the DAC 11 g, but now I am not able to connect to the DAC as it says.

  FAULT INFO: QServer stops because of the incompatibility of version of repository: repository you connect to

  is an incompatible version. The system shuts down.

  MESSAGE: the repository, you connect to

  is an incompatible version. The system shuts down.

  EXCEPTION CLASS: com.siebel.etl.upgrade1.VersionMismatchException

  Now how to remove the repository of 11g CAD already created on the side of the database so that while you connecting via DAC 10g, it creates the repository again and I can do a upgrade/fusion.

  Thank you

  Amit

  Hey Chick,

  I am not able to connect to the DAC, it throws me error

  The repository to which you are connecting

  is an incompatible version. The system shuts down.

  How to remove the repository of 11g CAD without connecting.

  Thank you

  Amit

• Disable the upgrade to the latest version of Windows through Windows Update.

  I am running Windows 7 Home version.

  In Windows Update, how do I remove the upgrade option to Windows 10?

  Thank you!

  Hello

  What you need to do here first, is to change the way you receive updates. The automatic updates enabled, the operating system will reinstall the nagware guest who is KB3035583 after uninstalling a step we will take in a minute.

  Then follow these steps:

  1. Right-click the icon of the center of the Action on the taskbar and go to "Windows Update".
  2. In the left menu, click on "change settings".
  3. Change automatic updates to "download updates but let me choose whether to install them".
  4. Click "Save Changes", then "Control Panel Home".
  5. Go to "Programs and features" and click on the link "View installed updates".
  6. Copy and paste KB3035583 in the high-field search right and when it appears below, right click and select "Uninstall". It's a great Setup uninstall can last several minutes.
  7. Then restart and then go back to Windows Update again.
  8. Since you now have different parameters of WU, click on the link if there is no waiting for your approval, which will bring you to the menu where you can decide what to install.
  9. If you see KB3035583 in the list, right click and select "hide update". The box you should checkmark to select an update will turn gray and when you exit WU, these files will be sent in the repository called "Restore hidden updates". You can restore the updates that have been hidden there at any time by clicking on the link, make your selection and click "restore".

  The next step is to edit a registry that will prevent Windows 10 download and installation.

  Press the Windows key + R to start the command run, type: regedit , and then click OK.

  Navigate to: HKEY_LOCAL_MACHINE--> SOFTWARE--> Microsoft-->--> CurrentVersion--> WindowsUpdate Windows--> AutoUpdate--> OSUpgrade

  Click the OSUpgrade key (which looks like a folder), and then in the right pane you should be able to see the four values respectively called:

  AllowOSUpgrade

  KickoffDownload

  KickoffSource

  OSUpgradeInteractive

  Part or all of them will have a value of 1. You need to change those to 0 as you see in the screenshot.

  

  To change a registry value, right-click and go to Edit. In the value field below, transform figure 1 0 a

  Click OK and Windows will add the 0x00000000 (0) itself.

  If it's already a 0 then you don't have to touch it.

  In addition, you must create a value. To do this, right-click on an empty part of the right pane, and then choose new DWORD with the name DisableOSUpgrade-->.  Windows will add REG_ DWORD early, after it is created.

  If inadvertently, you lose the highlight when you create the new value, right click and select Rename.

  Then, right-click of your new value and go to edit. Change the 0 value in a 1 in the value field. Click OK to confirm and exit.

  Reboot, then go to Windows updates. You will now be able to install updates 8.1 without being hassled by Windows 10.

  Credits:Xircal , from here

• The upgrade of database 10g to 11g with minimal downtime?

  Hi all

  We want to improve our 10.2.0.4 RAC database for 11.2.0.3 linux linux RAC. We have two different servers, where one is the production server (10.2.0.4) and another is the 11.2.0.3 Server.

  Here, we want to minimize downtime of the production database.

  Our db size is close to 1 TB. If we turn to the traditional method of upgradation as given below, then it will take nearly 15 hours:

  1. take RMAN 10 g bkp.

  2. transfer to server 11 g.

  3. restore the db.

  4. set at the database level.

  I had two methods to minimize the downtime that arise as follows, but I'm not sure that these means are feasible or not...

  1st method:

  Our server of db source here is 10.2.0.4 and target db server is 11.2.0.3.

  1. create a DR on the target server. (10.2.0.4)

  -Here we have installed the software (stand-alone) db to 10.2.0.4 on the target server, but also some 11.2.0.3 rac linux.

  -All data of Dr. files will be filesystem (not on ASM).

  Synchronize the database of production with the Dominican Republic.

  2. break the DR and turn it on.

  3 close the db and move the datafiles of the DR to ASM storage (11.2.0.3)

  4. start PB with option upgrade and update.

  It will take nearly 5 hours.

  2nd method:

  -Install the software grid 11g and 10g and 11 g db Server db software target.

  -We set up DR as first method but the grid HERE home will be 11 g and db House will be 10 g.

  -Now we will synchronize the DR with data base of production.

  -to activate the 10g database (target server)

  -will restart the database 11g House and then we will modernize it.

  Here I want to know that is it possible to create a DR with the following configuration?

  Production DB is 10.2.0.4 and DR is configured with 11g grid and g 10 db House.

  Kindly give your entries...

  Kind regards

  Andy...!

  Hi Srini,

  Thanks for the reply.

  I have the following document for the upgradation to 11g with minimal downtime, and it seems good. We make this POC...

  Upgrade to transitional assistance rolling logical Standby database: Oracle DataGuard 11g.

  Thank you all for your suggestions.

  Kind regards

  Andy...!

• kb310441 microsoft fixed it does not remove the old username of the process after removing the name of the pc.

  Microsoft fixed that it does not remove the name process after removing the name of the pc. How to make an old username of the process?

  Fix, he changed the name and organization... just not their process attached like taskmanager, explorer.exe, iexplore.exe, wuauclt.exe, and much more.

  Thank you

  Charlie

  Hi charlezim,

  Target article does not username, but the information stored on the computer.

  If you want to change user names, you must create a new user account.

  How to create and configure user accounts in Windows XP

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• After removing the Dual Boot, I can't delete the old partition

  Some time ago I installed an SSD and I have Windows 7 installed in Dual Boot with the Windows 7 system.
  So, I had two versions of Windows 7, which worked well.

  Now I no longer use the old system, I disabled the function of Dual Boot. I want to format the old drive, but it does not work because Windows still sees it as active system partition. In addition, I can't delete the partition.

  How can I format or delete the old partition?

  

  I already tried Msconfig, Bud that did not help. Default Msconfig begins with 'selective startup' and an operating system that is displayed in the Startup tab. When I select 'Normal Startup' there are two operating systems that are listed in the Startup tab. When I delete the old and reboot, it is back again...

  Who has the solution?

  (1) create a system repair disc (if you do not have an installation disk for Windows 7 for the version of Windows you have installed).
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  (2) then remove the hard disk you want to format. Now try to start the remaining version of Windows. You should see a missing bootmgr message. Proceed to step #3.

  (3) Bootmgr is missing, message or black screen with cursor flashing
  (See method #2 in this Wiki article)
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/Bootmgr-is-missing-message-or-black-screen-with/73fef5b7-5a7f-4910-a2b0-7219e9ec1646

  (4) after you have created the BCD store on the remaining drive (to step #3 above), it should start up on Windows and also be the partition 'Active'.

  (5) shut down the PC and set the old drive, turn on a load Windows and then delete all the remaining partitions on the old disk.

  J W Stuart: http://www.pagestart.com

• How to remove the old Windows and Windows Old.000 files in my C drive after reinstalling windows?

  I just reinstalled windows and I now have in my C drive a Windows.old and a Windows.Old.000 folder that is developing a massive 65GB of space, I really need, but when I try to delete it it says I need administrator permission to continue and I support on continue but it just comes back to the top again and I even tried to change the owner for me but it always happens with this message. How can I remove them?

  Hello

  After you are sure that you have copied all the files you want from this folder, use the Disk Cleanup Wizard to remove the folder.

  1. click on Start, type Disk Cleanup in the box start the search . In the results, click on disk cleanup right-click and select run as administrator option.

  2. in the Disk Cleanup Options dialog box, select the drive where Windows 7 is installed, and then click OK.

  3. click OK to analyze the C: drive.

  4. Click to select the previous Windows installation check box and any other files you want to delete.

  5. click on OK.

  Concerning