Removing data with .dvsdata file store

Similar Questions

• Attempt to add a new data with a script store

  I have an interview put in place where I remove a store of data once a week and he re-clone of our SAN.  I'm stuck with the script to add to the store of data back.

  I try to get the LUN ID of the new store of data to add.

  What I have so far is:

  I have remove the vSphere data store and delete the SAN volume.

  Then for a list of the currently available SCSI LUN:

  Get-VMHostStorage - RescanAllHba

  Get-ScsiLun | Select CanonicalName | Out-file c:\scripts\Before.txt-largeur 120

  $Before = get-Content c:\scripts\Before.txt

  I have it dumped to a file to make sure, that it was not truncated at all.

  Then, I create the new volume on the SAN and get the new list LUNS:

  Get-VMHostStorage - RescanAllHba

  Get-ScsiLun | Select CanonicalName | Out-file c:\scripts\After.txt-largeur 120

  $After = get-Content c:\scripts\After.txt

  Then to set the variable to the new LUN ID:

  $LunID = compare-object $Before $After

  The problem I have is that the $LunID variable is set to

  @{InputObject = eui.0134d870bf1f182f6c9ce90064ee16c5; {SideIndicator == >}

  Instead of the value eui.0134d870bf1f182f6c9ce90064ee16c5 that I need.

  Is there a way when I set the variable or run the object - compare to select only the part of this line?

  The result should be in $LunID.InputObject.

• ODI - reverse the data of the file store?

  Hi gurus,
  
  I'll put up the ODI for plainning application
  
  I have installation topology and have creatred models.
  
  Our requirement is to load the Member of Dimension Plannig of flat files.
  
  So I have to the templates in the designer of... One for the flat file... one for planning.
  
  I did the opposite of the planing model succesfull, and she filled with all dimensions.
  
  Now, I want to do the opposite for the file also.
  
  But when I'm walking back on the model of file it says... cannot reverse the file template, go to the columns in the data source tab and then do the opposite.
  
  I created a server manulayy Say for accounts Dimension data, went on the colum tab, then did the revere, he succeeded.
  
  But the problem is that the columns are like c1, c2, c3... so on.
  
  They do not have to come from the way the data store was filled when I reverence for data store planning.
  
  If anyone can suggest me a good way to make this event for that datasource is properly filled with the correcct names,
  
  
  Also is there a way to fill (reverse) model of file data source... for all files (say 15) and not individulally one by one.
  
  
  Suggestions would be much appreciated
  
  Thanks in advance

  If your file as header records make it sure in the files tab set heading 1 then when you reverse the columns that it must pick up the column headings

  Reversal of several files you can watch http://odiexperts.com/rkm-file-jython/

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Remove data with null value

  Hello

  I'm using Oracle 11 g. I have a table with an id of 3, node, the value column. Combination of the column id and node, that must be taken account for deletion on the registers.

  Here, I need to delete lines with the NULL value in the value column. If for a combination of id and node with non-null values, then I need to delete rows with a null value for this combination.

  If the combination of id, node is not null value then this records should not delete.

  Below table, I need to remove the second row, for which is a value not zero VOICE CAL '10' is there, so I need to delete the row with null values. (VOICE, CAL, NULL)

  Network, FL, there is no value is non-null then I should NOT delete this line.

  This table is to have 100 s of this association, we can delete data in a single delete query?

  Or how I can delete rows with nulls for this combination.

  Tab1

  VALUE OF THE NŒUD ID

  VOICE CAL 10
  VOICE CAL NULL
  NETWORK NULL FL

  Thank you

  Hello

  oradba11 wrote:

  Hello

  I'm using Oracle 11 g. I have a table with an id of 3, node, the value column. Combination of the column id and node, that must be taken account for deletion on the registers.

  Here, I need to delete lines with the NULL value in the value column. If for a combination of id and node with non-null values, then I need to delete rows with a null value for this combination.

  If the combination of id, node is not null value then this records should not delete.

  Below table, I need to remove the second row, for which is a value not zero VOICE CAL '10' is there, so I need to delete the row with null values. (VOICE, CAL, NULL)

  Network, FL, there is no value is non-null then I should NOT delete this line.

  This table is to have 100 s of this association, we can delete data in a single delete query?

  Or how I can delete rows with nulls for this combination.

  Tab1

  VALUE OF THE NŒUD ID

  VOICE CAL 10
  VOICE CAL NULL
  NETWORK NULL FL

  Thank you

  You can do this in a single DELETE statement (it is not a request), using an EXISTS or IN the subquery.  For example:

  REMOVE table_x m

  WHERE the value IS NULL

  AND THERE ARE)

  SELECT 0

  FROM table_x s

  WHERE s.id = m.id

  AND s.node = m.node

  AND s.value IS NOT NULL

  )

  ;

  If you would care to post CREATE TABLE and INSERT instructions for the sample data, and then I could test it.

• get the name of the data with scsi CanonicalName store

  Hello

  I need name of data store that we define when adding LUN... I have that... with the same canonical name scsci in need of the cluster name, host name, and virtual machine running on this Lun.

  This sample script:

  Get-data-center "testdt" | Get-cluster "tstclu" | Get-Vmhost | Get-ScsiLun - CanonicalName * 6006016010122900 *.

  Try like this

  New-VIProperty -Name lunDatastoreName -ObjectType ScsiLun -Value {    param($lun)
  
      $ds = $lun.VMHost.ExtensionData.Datastore | %{Get-View $_} |         where {$_.Summary.Type -eq "VMFS" -and            ($_.Info.Vmfs.Extent | where {$_.DiskName -eq $lun.CanonicalName})}    if($ds){        $ds.Name    }} -Force | Out-Null
  

  I've updated the code on VIProperties as well.

  Thanks for finding this 'feature '.

• (of) data of the console store?

  Hi all

  I was wondering if there is a command that you can run / script to remove data from the console store? and if it is if it can be done in ESXi as well?

  Hello

  The answer depends on the data store. If it is a store of data NAS (NFS), you can use esxcfg-nas or nas vicfg to achieve your goals. If it's something else then there is no real way to disassemble the data store of in ESX short of dropping the pilot. You have to manage the presentation in your SAN/iSCSI server to do this or zoning in your switches fibre to achieve this purpose.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• How to remove a store of data with force

  Last week we did a migration of old data spinning again spinning. After in the opposite direction of all the virtual machines to the new file server, we made all virtual machines online since the new file server. Now the thing is, I can't delete the existing data store (old spin). When I tried to delete the VC data store, it throws an error:

  

  Y at - it a command/tip to remove the store of data with force?

  

  Thank you

  Ganesh

  See this thread:

  http://communities.VMware.com/thread/89271

  André

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }

• Find the store of data with more free space.

  So I'm trying to build a script to configure the virtual machine.

  I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.

  Where I have questions, how can I

  find the data store less used, based on a particular data store naming scheme.

  I want to say is:

  Hypathetically, I for example named data warehouses:

  store data-prod-01 200 GB free

  store data-prod-02 500 GB free

  free data-prod-03 10 GB store

  free data-qa-01 200 GB store

  free data-qa-02 1000 GB store

  I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)

  I guess I want to know if it is possible?

  I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.

  This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.

  Hello, drivera01-

  You should be able to do this with a very small amount of code.  Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one.  As:

  ## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1
  
  ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
  

  The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis.  How does this look?

• Move all files with the file hard, in two data warehouses

  You can move these files from the data through VC or WinSCP3 store? You have on the eve of vm? There is that one disc and files are on two separate data stores.

  Please move configuration files to the same data as the vmdk files store to ensure an appropriate server recovery. I ran a backup because it is now, but in this State, I can't assure you that I will be able to recover properly. ProdVMLUN1A3/CO01 (configuration files) ProdVMLUN4A22/CO01 (vmdk files)

  Thank you

  D

  If you're on ESX 3.0, you can do a few things.  We could be to stop the virtual machine in question, and then choose migrate.  In the wizard you will be asked if you want to 'keep' or 'move', choose move.  Another way would be to use VMware Converter

  If you ran 2.5 and ESX 3.5 vCenter, you could do it live with sVmotion.

• I have more than a single file for Mozilla in Windows Explorer. Can I delete the one with the dates of older files?

  My current version is 14.0.1 and show like Mozilla in Windows Explorer. Dates of the files are up to date. The second file in Windows Explorer is listed as Mozilla (2) and has files from 2010. The window add or Remove Programs page shows only a single installation. Can I safely delete the Mozilla (2) from the widows Explorer?

  My operating system is Windows XP - SP3.

  In this case, I'll try renaming the Mozilla (2) and make sure that everything works. If so, you can delete it.

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• WHAT DID YOU DO WITH MY FILES AND EMAIL NOT OPEN? Email removed for privacy. Answer NOW.

  WHAT DID YOU DO WITH MY FILES AND EMAIL NOT OPEN.  E-mail address is removed from the privacy *.  Answer NOW.

  It is just a forum for helping hand in hand. Nobody here touched your records or by mail.

  A question of Hotmail or Windows Live Mail?
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/00015cf4-4654-4296-8aa6-b88ae3bcbde1

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Conversion: Can I use Corel WordPefrect 8 data with Windows Vista files?

  Can I use data files Corel WordPefrect 8 with Windows Vista?

  On Friday, June 11, 2010 17:03:40 + 0000, grandmadfs wrote:
   
  > Can I use Corel WordPefrect 8 data with Windows Vista files?
   
   
   
  The issue here is not one of which version of Windows you are using.
  It is one of what you have installed applications.
   
  The answer is Yes, if you have WordPerfect (or some compatible)
  program) installed on Windows Vista. The answer is no, if you do not.
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake