Rename items when a conditional loop

Similar Questions

• case structure: to run once when the condition is true

  I have a case structure in my program. I use this to count the number of cycles in my experience. I have a knot of feedback (image of the program here attaced) within a box structure. I want the case structure to run only ONCE when the condition is "TRUE". Each "TRUE" represents each cycle. The problem that I'm facing here is that the box structure is permanently running as long as it is 'TRUE' instead of running once and wait for the next 'TRUE '.

  Temporaritly I use a timer inside (as you can see in the picture) to contain the program for the next 'REAL' to come. I hold as by case so I know exactly the time. Is it possible to make the case structure running only once when the condition become ' TRUE and wait for the next "REAL"?  OR is there any other loop that case structure that make this work?

  Hi aneps,

  PtByPt_BooleanCrossing is your friend!

  You really need to work on the analysis/description of your problem: you don't want to run the case as long as the entry is set to TRUE, but you want to run the case at the entrance of the past from FALSE to TRUE!

• / Start differed only in a conditional loop.

  Hello

  I want to use a delay (or some kind of timer) in my program. I intend to use for it in a conditional loop. Specifically, if a certain condition is true, then I want to wait for 50ms and then check out some other condition, which, if true, I want to stop my program.

  I used wait vi in the calendar section. But this vi stops my entire program. Specifically, when the above condition is met, I want the late vi to run along with my acquistion of data vi. At present, when the late vi runs, any (acquisition of data, detection of crete, pointing etc.) in program breaks. I guess its correct functionality to wait vi, but it does not fit my need.

  Do you need an alternate suspension loop condition (self-timer) an individual without affecting the other parts of my program? Specifically, only delays in parole for awhile then loop than other features as for the acquisition of data, detection of crete, pointing etc excute normally.

  This is because the timer of waiting (ms) contains the code to wait too long before continue execution.

  You want to use is the Express VI of elapsed time.  It stores the time in a shift register and returns a true that after the specified time interval has elapsed, it doensn can't say anyting to Wait.  Make sure you read the help about it.  It has multiple inputs such as Reset and Auto-Reset, you'll want to pay attention to, if it is a function that you need to run a series of measures of elapsed time.

• Conditional loop does not work correctly.

  Hello
  
  If you look at my code, its all about the analysis of a dictionary. IM check the dictionary for the word 'aardvark '. It gives me wrong all the time. When "aardvark" is the first word of the table, IE my_dictionary [0] is "aardvark". I wonder why the conditional loop does not work very well. IM checking if the user string aardvark is == my_dictionary ; he should give me the true value.
  
  Is there an error in the code? Can someone explain to me where im going wrong?
  
  PS-> put everywhere traces gives me the right output. Except for the result of the if() function.
  
  Best regards and many thanks in advance.
  Roshan Kolar

  Hi Raymond,

  Thanks for the reply. I had the problem, actually the conditional loop was perfect, the analysis was not. The reason is, a few words in the dictionary had a return of cart/jump of line/space to the index of the last after the word. It was randomly, so some words have been taken, but some were not as "vicious" == "vicious" - gives the INVALID WORD.

  So I was thinking about the parser, where I removed the unwanted last tank - now the condition has worked well. Thank God I worked even after the publication of the request.

  Thank you very much Raymond.

  Kind regards
  Roshan

• Bug for State assets on a Menu item when an anchor its placed on the Page of masters as a footer...

  Hi, I think I found a bug with Adobe Muse CC 2015.

  As I said on a previous question to myself,

  I have observed the following

  -Created a Page in the House of master (House - A-master) which is actually a unique site of scrolling down

  -Use the masters (A template) to display the section "Contact us" on the footer

  -Created a menu across the top for the user to navigate to all sections of the site, just on the scrolling page

  -Finally place the pegs on the menu and indicates where status = Active, a horizontal black line is placed under the menu item

  So, for the content of the footer, I have created some social media links,

  The problem is that when I used the anchor point in the menu to go to the footer,

  even if an anchor was placed on the page of masters (A-master).

  the menu item was not as I wanted in the active state (with a horizontal black line).

  He was placed on the section of the site, even if I was transferred to the content of the footer.

  So I tried the following:

  -Copy the contents of the footer on the main and placed my anchor Home Page here.

  It works well.

  So, if I'm not mistaken, there is a bug for the active on a Menu item, when state his place on the

  Page of Merlin as a footer...

  You can see the question on

  nektariostest.BusinessCatalyst.com/index.html

  and you can make the change I describe, and the problem is solved.

  My previous thread was: Question about the menu item is displayed does not correctly on the 'Active' State

  BR

  ARIS

  Please check whether or not the active State for the anchor links is enabled, go to Site Properties > advanced

  Thank you

  Sanjit

• How to write a procedure for setting Out when the condition fails

  Here's my query, it works very well when the condition is fulfilled with the valid user ID and password
  
  create or replace
  PROCEDURE ISVALIDUSER / * this is procedure created to validate the connection information to users created on 09212012 by Charbonneau * /.
  (
  pUSERID IN VARCHAR2,
  Ppassword IN VARCHAR2,
  pUSERTYPE OUT NUMBER
  )
  AS
  tmpUSERID VARCHAR2 (30);
  tmpPASSWORD VARCHAR2 (150);
  tmpIsative VARCHAR2 (10);
  BEGIN
  SELECT Userid, PASSWORD IN tmpUSERID, tmpPASSWORD FROM USERMASTER WHERE USERMASTER. USERID = pUSERID and USERMASTER. PASSWORD = Ppassword AND isactive = "Y";
  / * Check ID USER Existed or not * / / * PASSWORD verification is Existed or not * /.
  IF tmpPASSWORD = AND tmpuserid = pUSERID THEN pPassword
  USERTYPE of SELECT INTO pUSERTYPE FROM USERMASTER WHERE USERMASTER. USERID = pUSERID and USERMASTER. PASSWORD = pPassword;
  ON THE OTHER
  BEGIN
  1 SELECT INTO pUSERTYPE FROM DUAL;
  END;
  END IF;
  END;
  
  
  Here I am facing a problem when I get invalid user or password ID it is failed - 1 in pUSERTYPE which is OUT setting
  Please suggest

  You need to read about the exceptions - {message identifier: = 9360013}

  create or replace
  PROCEDURE ISVALIDUSER /*This is Procedure created to validate Login users information Created on 09212012 by Chakravarthy*/
  (
  pUSERID IN VARCHAR2,
  pPASSWORD IN VARCHAR2,
  pUSERTYPE OUT NUMBER
  )
  AS
       tmpIsative VARCHAR2(10);
  BEGIN
       SELECT USERTYPE INTO pUSERTYPE
       FROM USERMASTER WHERE USERMASTER.USERID=pUSERID
       and USERMASTER.PASSWORD=pPASSWORD AND isactive='Y';
  exception
       when no_data_found then
            pUSERTYPE := -1;
  END;
  

  You store your password without encrypting? One who is to have access to your table will see the password...

• Rename-Item

  Is it possible to put a variable in a system path? Here is my example:

  Rename-Item - path "c:\powershell scripts\$variable\file1.txt" - NewName test.txt

  I get an error that the item does not exist and I think it's because the $variable is not evaluated to right. I put single quotes around the path due to the space inbetween powershell and scripting. Is there another way to do this?

  The trick is in quotation marks, apostrophes = no substitution of variables, double quotes = substitution of variables.

  But there are other ways to do it as well.

  You can use the concatention operator, such as

  Rename-Item -path ('c:\powershell scripts\' + $variable + '\file1.txt') -NewName test.txt
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• What are the supported items when you use multiple suites?

  Hi all

  I created a plugin that sends the current path to a url,

  his work very well with debugging in Visual studio 2005 and then it is added to the Adobe Illustrator work only once.

  Its transmission, the path is that for a single file. While I was trying for the second time its does not work

  I use more costumes in my plugin

  AIDocumentSuite

  AIFilePathSuite

  AIActionManagerSuite

  AIUnicodeStringSuite

  AIURLSuite

  I use the "'AIURLSuite ' to call the url and calls the url several times while its used only and its only works once with multiple suites. "

  What are the supported items when you use multiple suites? It is necessary to release all the variables and the suites after completing the task?

  Should they come out in the same order in which they are acquired?

  Thanks in advance

  Farida kaid

  As far as I know, there is nothing forcing you to unleash in the same or in front of the order in which you have acquired in. Frankly, in our plugin gain us once, then lock the plugin to prevent it from unloading and don't release suites when we finished. That said, as far as I know, you should be fine to learn/work/output several times.

• show/hide the button with the icon enabled when the condition is met

  Hello
  
  I created a B button with an icon of a sign of the green check mark.
  It must appear next to another A button when a condition is met.
  
  How can I better get this working B key, without using something else than the APEX.
  
  The condition is that some data has been inserted by clicking A button or simply exist in the database table.
  
  I tried conditional display of point with conditiontype "PL/SQL Expression.
  but could not make it work.
  
  TNX to tide me over.
  
  Cara

  Hello

  If you use the condition EXISTS (SQL query returns at least one row)?

  This could give idea how
  http://Apex-SMB.blogspot.com/2009/05/How-to-determine-if-user-can-view-apex.html

  BR, Jari

  Published by: jarola 18 November 2009 16:07

  Oh,.
  I paste the wrong link and can not find more good.
  Well anyway in this link is also example to condition EXISTS

  To meet this requirement I can add a condition (SQL Exists) to the Report 2 region on Page 2:
  

  It takes something similar and your table selection

• Conditional loop

  Hello
  
  I thought it was a simple conditional loop to search for every occurrence of a string of serach in a variable. Basically by train to find the occurrence, he notes, then go. If findnocase isn't an accident, it should return 0, to end the loop:
  
  < cfset findvar = 1 >
  
  < Cfloop condition = "findvar GT 0" >
  < cfoutput >
  < cfset findvar = #findnocase("#form.searchterm#","#searchfile#",#findvar#) # >
  Position in the file: #findvar # < br >
  
  < / cfoutput >
  < / cfloop >
  
  This does not at all. Everything rotates forever and never returns a result.
  
  ... help? Thank you!

  
  
  Position in the file: #findvar #
  
  

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now

• Set the value of items when the box is checked

  Hello
  
  My requirement is when a checkbox is clicked it should set the value of an element such as 111111 and clear the values of two objects in a page of the apex.
  I used the java script onClick event to set the items using document.getElementByID ('Item_Name') = ";
  One element that needs to be eliminated is a type of conditional.
  When the element condional, java script works very well. But if it is not present.
  code works, but it displays "error on page" for a few seconds.
  
  Is it possible to erase the element only when the element is present in the page.
  
  Thank you
  Ravi

  Hello

  Yes as for example

  if($x("ITEM_NAME")){
   $s("ITEM_NAME", "");
  }
  

  Kind regards
  Jari

• Why say iCloud "download items" when nothing new appeared?

  I bought more iCloud storage so that could import the pictures lost; Mac and iPhone say "download items", but nothing new appears.  My app Photo on Mac says that he had been waiting for the import of 15,000 pictures that my sotarge was full.  I bought more storage and since then he has been telling me that it is x amount of the 'elements', import taking the original 15 000 to about 12,000 currently.  It is a positive reaction to buying more storage, however no new pictures or videos are appearing in the library while the numbers decrease. Need HELP, my pictures are just ghosts?

  Same thing happens on the iPhone itself so.

  Pictures will start the download of iCloud, once it has finished downloading. It will be first merge the element that it downloads in the iCloud existing photo library in iCloud and then download lack of news.

  You see new elements in the Photos.app to www.icloud.com, when you look directly through the web interface for iCloud?

• Rename pictures when they are imported

  I was unable to respond to your message on a script that this batch changes the title of image files in pictures for the date and time, they have been taken. I used the script above, but when I try to run it now, I get an error. The error that says: "Photos has been an error: Manager AppleEvent has failed. ' number - 10000

  Not sure why it doesn't work. Very important for me to be able to rename pictures during their import.

  Thank you.

  < object edited by host >

  As demonstrated in this thread: Download Extensions for Photos and A Better Finder Rename and do it in Photos!

  Re: Photos of bringing to a pro level

  and more OS &... Photos of Mac discussion.

• FPGA timing when compiling PID loop error

  Hello.

  I'm using Labview 2011 card FPGA PCI-7833R.

  My problem is that whenever I try to integrate FPGA designed screws in my code, I get an error of timing.  See the photos displayed below.

  In this case, I have an express VI PID which I use in a used while loop (not even timed!) in my FPGA code, but when compiling, I get an error saying that the possible maximum clock frequency is the 43 MHz.

  I have a lot of loops, a few running at 80 MHz.  Is there a way to slow down a specific while loop, so that it runs at 40 MHz and not 80 MHz, as others?  The compiler does not seem to meet the simple addition of a timer loop...

  Thank you

  Orel.

  PS the same thing happens when I try to add a lowpass filter VI of the FPGA code.

  Is it possible that you set the level above 80 Mhz clock?  This is what it looks like to me.  In Explorer, right click on the FPGA target, select Properties, then go to the category "first level clock.