Rename the name of a file in Sansa Clip +.

Similar Questions

• Rename the name of the file without updating the metadata

  Hello

  I'm new to LR and would like to know if it is possible to rename the name of the file in LR 5 (after the import of images) without changing the name of the original file in the EXIF metadata? For example, the name of the original file is DSC_1234.NEF and I would like to rename it to "Hawaii_1234.NEF" in the catalog, as well as the name of the file on the HARD disk, but woud like to keep the original "DSC_1234.NEF" in the metadata.

  It seems that LR also renames file name in metadata if I read earlier rename after import (through the library - option Rename pictures) will not change the name of 'original' file in the metadata.

  Thank you.

  André.

  Hmm - confusing...

  I mean, Lr going to keep "DSC_1234.NEF" as the piece of metadata named "Original file name", after you rename the file "Hawaii_1234.NEF". The 'current' file name, in the metadata, will of course be the new file name (Hawaii_1234.NEF).

  Did you want something different?

  Rob

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Jobs recording under the name of temporary file

  Hello fellow Scripting Guys!

  //  Save the open file to the new direct to print folder as EPS with artboard enabled.
  
  #target illustrator-19;
  
  
  var newName = prompt ('enter in the new file name', "DJ", "Saveing to STE with new name");
  
  saveFileToEPS();
  
                 var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close();
  
  function saveFileToEPS() //  saves the file to the server as a .EPS document.
  {  
      var thisDoc = app.activeDocument;
      if ( app.documents.length > 0 )
      {
          var saveName = new File ("folder location" + newName);
          saveOpts = new EPSSaveOptions();
          saveOpts.compatibility = Compatibility.ILLUSTRATOR13;
          saveOpts.generateThumbnails = true; 
          saveOpts.preserveEditability = true;
          
          saveOpts.artBoardClipping = true;
          saveOpts.saveMultipleArtboards = true;  
  
          var currentArtboard = app.activeDocument.artboards.getActiveArtboardIndex();
  
          saveOpts.artboardRange = currentArtboard + 1; // artboard # of the currently active artboard
          thisDoc.saveAs( saveName, saveOpts );
      }
  }
  

  I got the code above and when she runs 2/3 of the time, it runs great but the other 1/3 of the time it fails to rename and files are saved under the name of temporary file A1 #.  Is it possible to add a fail safe module to this?  Maybe do create the new file in a folder, make sure that the file has the file, and THEN move the file in this folder into the right pair?

  I annotated the popup code section and I don't see the problem more.  Something in the code below was he locked up and renaming does not...  Good times with the scripts!

  appreciate your help Silly-V.

      /*           var w = new Window("palette","Saved To STE Printer",undefined,{closeButton:false});
                      w.add("statictext",undefined,"File has been saved to STE Printer");
                      w.show();
                      $.sleep(100);
                     w.close(); 
  
  */
  

• It seems that FFv.12 does not allow Scandinavian letters in the names of downloaded files, but gets stuck all by contacting the localhost?

  I do a fileupload page and it seems that FFv.12 does not allow for Scandinavian letters in the names of downloaded files, given that the browser gets stuck trying to communicate with the local host. Fix? This behavior differs from that of other browsers (IE, Chrome, Opera and Safari).

  That are Unicode characters in the name of the file or the characters in the top 0 x 80-0xFF range?

• Cannot use fax function after rename the name of the printer

  I have an MFP HP LaserJet M1536DNF connected by network.  I have run the full setup package by the CD of the product, or on the web, complete update install the driver package.  The problem is the default printer name after installation as like "HP LaserJet 1530 MPF Series PCL 6" and can not be changed through the installation.  When I tried to change the printer name on the windows 'Printers and faxes', he managed but the fax doesn't work anymore after that.  It says probably 'impossible to find or connect the printer' after I click the fax or print the document to the fax printer.  However, I can still use the printing function after the name change.  The only way to solve now is to uninstall all and reinstall again, even I tried to rename back the name exactly for the name of the printer.  I use Window XP Pro SP3 with .net Framework 3.5 already up-to-date.  Thanks for the tips.

  Hi Cheetah12,

  Sorry to misunderstand.  I mean there is no option to not rename the printer when you run the complete package installation wizardfirst, but not the fax configuration wizard.

  In fact, I must mention once again that I have can print and scan even I renamed the printer.  Things I can't do the HP Send Fax or fax HP Setup Assistant and so, which means my fax machine was not working properly.

  Therefore, I follow the document from HP that you post step by step and of course the diagnosis by downloaded HP Print result and doctor Scan for both printing and scanning are in good health, all in green light!  But cannot always solve the problem of the fax.

  However, I finally found my way to solve the problem, which is just rename back the original printer name in the registry.  As a result, the printer in "Printers and faxes" which always shows the famous name, but actually running with the original name of the printer.

  In any case, thank you for your kindly help and fast track.  But I suggest there should be a direct way, like having an option to rename the name of the printer while the first installation wizard on your next updated version.  This will certainly help users who have to install 2 or more of the same model printer, to indicate which printer works easily.

• Clicking or stutter during playback of the audio file on Sansa Clip

  I'm having a problem similar to that described in the following thread:

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&message.ID=2785&query.ID=219379#M2785

  Only I have the problem on a 4 GB Sansa Clip.

  The audio file is a DRM WMA to NetLibrary, 165MB, 32 Kbps and 11:48:01 in length.

  I am currently at 05:21 mark in the file and the stuttering arrived at a point where it is difficult to listen to the file.

  I had filled the files of devices (especially the music, a few podcasts) and then deleted, filled again, etc., so there may be some fragmentation that is either the problem.

  I'm reformatting of the clip using the internal format of the device function and allows you to copy only the audio book on the device at the beginning to see if the problem goes away (this * should * minimise, if not eliminate the fragmentation).  Then I resync the rest of the music files to the player using Windows Media Player, and then see if the problem comes back.

  I'll post my results here.

  Reformat the device worked very well.  The audio file sounds fine and the file is read immediately when you rewind or fast forward through the file (before it should pause a few seconds once you wanted to before play).

• Why windows media player displays only the names of original files?

  Windows Media Player only shows the original file names that can be confusing if I changed the name of a file. The name of the file (usually audio files) is correct in Windows Explorer, but in the component list of WMP, it's often the old file name. Why is this and what can I do about it? Advice would be appreciated. TA. Kevin.

  What the file type of these music files (MP3, WMA, WAV...)?

  WMP usually displays the title tags of the music file, which is independent of the file name. However, WMP always displays the current file name in the path column of the file, which can be activated by right clicking on a column header and select choose columns.

• Rename the name of Module e/s in M1000e

  Hi friends, is it possible to rename the name of Module e/s in M1000e? For example, in SLOT A1 in the name field displays the switch model and I would like to configure to display the name of switch´s.

  Concerning

  Hello

  There is not a way to rename the switches, only the server slots.

• To-do bar display of the names of open files

  In Windows Vista, it used to display my documents open in the taskbar with all instances of applications (such as IE) and the names of open files. Windows 7 is not that. Is it possible to restore that? I find it really useful to the click on the right app or the document I want to open.

  David

  Anchorage Alaska

  Right click on the taskbar-> properties-> Taskbar Button :-> select never combine-> Apply-> OK

  See if that helps.

• Rename the name of the BPEL process

  Hello
  
  We are working on JDeveloper 11.1.1.5.0 and created a BPEL process in composite and wired it.
  
  Can someone tell me how to rename the name of the BPEL process which is given earlier.
  
  Sidonie

  It is a long process, but you can try this...
  https://blogs.Oracle.com/middleware/entry/renaming_bpel_process_names

• Impossible to display the names of HTML files in the HTML Files (topics) folder in the project manager

  RH8, I want to see the names of the HTML files instead of topic titles in the project manager.  I chose the button toggle project manager and the name of the folder is passed to "HTML Files (topics)" of "Project Files".  However, the folder of files HTML (topics) lists topics with subject titles, rather than the names of HTM files.  I was expecting to see the topic list in the Manager component of project with HTM file names.

  What should I do to display topics by names of HTM files in project manager?  The rocker is not working properly, or I do not understand what the toggle button?

  This occurs for each project, we have - all of which have been improved from RoboHelp X 5 to RH8.

  Thanks for your help.

  Susan

  You switch between the new view and the classic view. Try the view menu.

  See www.grainge.org for creating tips and RoboHelp

• Renaming of documents by adding an annex of the commune for the names of existing files on several files in a single folder

  Is it possible to add an annex to the town (for example "-file BL ') existing file name (for example"daily reports1) to several (selected) files in the same folder?  (The example given could therefore be renamed "daily reports - comes from the BL file").  I need to do this to identify the source of documents folder when they are copied into a common folder: to compare with the similar files in other folders for various purposes.  There are a lot of documents in many files, I need to transfer and compare.  A rough estimate, it is that I need to add an annex to the town of 200 files named differently in a single folder and repeat this process for 30 files: with my existing knowledge of XP, this means that I would have use the rename individually on 6000 documents, and if the additional annex has been say 5 characters which would be a minimum of 30 000 key strokes : If adding appendages common to several document names selected in a folder is possible, this might reduce the name change to close to 150 list.

  PLEASE NOTE the multiple rename function where each selected file is the same thing with a renamed after the index number in brackets should not be - the original file name should be kept.

  Hello

  Refer to the link below and check if this may help:http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/1b0deaf4-8416-4e03-aa9c-e3ce1259866b

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm looking for the name of a file that I downloaded four months ago.

  I downloaded a file, either the 15th or 16th. Embarrassing, I lost the file, simply by forgetting his name. I need to be able to find my download history, by date. Does anyone know how to do this? I know that history is retained as long, and that I have not erased from history. Find the date that I visited the Web site was easy using the history and an approximate date, but the download history is less intuitive.

  And, no, don't help not revisit the site; the only way to find the name of the file it (it's an e-book) is to buy it again, which is NOT what I want to do.

  It is in Windows 7 Home Premium, with FireFox v. 28.0 (Yes, I know that it is outdated; I have not used this computer a lot lately). I don't know which version of FireFox has been installed at the time of download - everything that was more common at the time, as I usually make a practice of installing updates.

  You can click on view history to open the library.
  You should see the downloads folder in the left pane between the record of history and bookmarks.
  You can also click on the download icon (down arrow) on the Navigation toolbar, and click Show all downloads.

  If you renamed the file then you will not be able to open the file and may also not be the containing folder where you saved the source of the file, but at least it means that you always have this file download history.

• I've renamed the images in a file and now they are all out of control, how to make their return to the original order

  I opened a drive with my camera phone, then renamed the photos with brief descriptions, and now they are all out of order. How to make back in the original order they appeared.

  Dennis

  Renamed files are apparently to be sorted by alphabetical order.
  It is the normal behavior of Windows.

  If you open the folder in question and go to... View / details... and
  Select the column that says: "Date picture taken", she should use
  photos.

  Also you can drag and drop photos to change position.

  Once you have pictures in the order you need... you can re-
  Number them in a batch to maintain order.

  Just go to... Edition / select all... right click on the first file name and choose...
  Rename... Enter the next number...

  .jpg (10001)

  Press Enter and the remaining files will be named in the order.

  You can also add a word if you want to identify the group.

  Summer vacation (10001) .jpg
  (Yes, there is a space between the letter n and the first parenthesis)