Rename the RAC Instances in 11.2.0.2
HelloI have two node RAC - Systems Version 11.2.0.2 on Linux Redhat 5.4 X 86 - 64.
+ Node names stb, dwh
+ Name of the database: RAC
+-The instance name 1: RAC1 on stb
+ Name of instance 2: RAC2 on dwh
After completing the following steps:
+ RAC2 Instance delete with dbca on dwh
+ Convert the RAC1 Instance in Instance RACONE_1 (a RAC node)
+ Move the Instance RACONE_1 to dwh
+ RACONE_1 of the Instance to convert (one RAC node) to RACONE (normal CARS)
+ Add Instance RACONE2 to stb
Since yesterday, after shutdowning the corresponding instance I tried in vain to rename the Forum RACONE2 phen. RACONE to previous RAC1 and RAC2 names with srvctl change on the node with the currently running instance.
Any expert can help me?
Thank you
hqt200475
Note: http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#i1009714 says:
srvctl change instance db_unique_name d-i InstanceName
{node_name n |-z}
Notes:
* You can not use this command to rename or move a running instance.
* This command is only available with Oracle RAC Oracle Clusterware.
Hello
+ srvctl stop instance d-i RACONE2
+ srvctl change instance d RAC RAC1 stb - n-i
Here, I have the problem:
I don't know how to change the name of RACONE2 in RAC1 and RAC2 in RACONE.
You know the answer?
Never tried to change the name of the instance of the RAC 11.2.
But in earlier versions, I always perform the following steps to update after OCR changed INSTANCE_NAME in the database (SPFILE).
Should be called SRVCTL to remove and re-add the database information to OCR.
e.g
*****before the rename*****
srvctl stop database -d
srvctl remove instance -d -i
srvctl remove instance -d -i
(repeat above command for each instance as needed)
*****and after the rename*****
srvctl add instance -d -i -n
(repeat above command for each instance as needed)
Kind regards
Levi Pereira
Published by: Levi Pereira on January 30, 2011 22:36
Tags: Database
Similar Questions
-
Unable to start the RAC instance
Hi all
When you start the RAC instance on the first node, I get the following error and my database is not open.
#######################################################################################
SQL > startup
ORACLE instance started.
Total System Global Area 608174080 bytes
Bytes of size 2058048 fixed
255854784 variable size bytes
343932928 of database buffers bytes
Redo buffers 6328320 bytes
Mounted database.
ORA-00313: open failed for the members of the Group of newspapers wire 2 6
ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
ORA-27037: unable to get file status
HP-UX-ia64 error: 2: no such file or directory
Additional information: 3
#######################################################################################
The redolog file "/ u01/redo_groups/logSLVMRAC26.ora" has been created in the local disk for instance CARS 2 in the second node to the cluster 2 knots. Like that, I created redolog file ' / u01/redo_groups/logSLVMRAC15.ora ' by RAC example 1 in the first node in the localdisk. When to start the RAC 2 instance in the second node get similar error.
#######################################################################################
SQL > startup
ORACLE instance started.
Total System Global Area 608174080 bytes
Bytes of size 2058048 fixed
264243392 variable size bytes
335544320 of database buffers bytes
Redo buffers 6328320 bytes
Mounted database.
ORA-00313: open failed for the members of the Group 5 of the thread log 1
ORA-00312: wire 5 1 online journal: ' / u01/redo_groups/logSLVMRAC15.ora'
ORA-27037: unable to get file status
HP-UX-ia64 error: 2: no such file or directory
Additional information: 3
#######################################################################################
Have tried to remove this redogroups, I'm not able to remove these. I get this error.
SQL > startup mount
ORACLE instance started.
Total System Global Area 608174080 bytes
Bytes of size 2058048 fixed
255854784 variable size bytes
343932928 of database buffers bytes
Redo buffers 6328320 bytes
Mounted database.
SQL >
SQL > select * from v$ logfile;
GROUP # STATUS TYPE
---------- ------- -------
MEMBERS
--------------------------------------------------------------------------------
IS_
---
2 ONLINE
/ dev/slvm_rac/rredo1_2
NO.
1 ONLINE
/ dev/slvm_rac/rredo1_1
NO.
GROUP # STATUS TYPE
---------- ------- -------
MEMBERS
--------------------------------------------------------------------------------
IS_
---
3 ONLINE
/ dev/slvm_rac/rredo2_1
NO.
4 BLAND ONLINE
/ dev/slvm_rac/rredo2_2
GROUP # STATUS TYPE
---------- ------- -------
MEMBERS
--------------------------------------------------------------------------------
IS_
---
NO.
5 ONLINE
/U01/redo_groups/logSLVMRAC15.ora
NO.
6 ONLINE
GROUP # STATUS TYPE
---------- ------- -------
MEMBERS
--------------------------------------------------------------------------------
IS_
---
/U01/redo_groups/logSLVMRAC26.ora
NO.
6 selected lines.
SQL > alter database drop logfile Group 6
2;
alter database drop logfile Group 6
*
ERROR on line 1:
ORA-01623: log 6 is the journal current for example slvmrac2 (thread 2) - can't remove
ORA-00312: threads of 6 2 online newspaper: ' / u01/redo_groups/logSLVMRAC26.ora'
Any help to get out of this problem or how to remove the roll forward group which is the newspaper online for the current instance.Well, then you have to reinstall both Redo Log files accessible from nodes.
-
Running the Single Instance and RAC on the same server of different homes.
Hi guys,.
I already have 4 node RAC12c installed on OLE 6.
I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.
Please correct me here if I am wrong...
My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.
Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.
Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?
2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?
Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.
K
Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.
See you soon,.
Brian -
How a RAC DB 'spreads' the only instance to multiple instances?
GI/RDBMS Version: 11.2.0.3
OS: Oracle Linux 6.3
File system: ASM
When a RAC database is created using dbca, manually, or restore RMAN, the DB is created in the first Node1 with cluster_Database = FALSE.
Then, you run the following (for 3-node RAC) commands to Node1
srvctl add the d o $ORACLE_HOME lmnprod +LMNPROD_DATA01/lmnprod/spfilelmnprod.ora Pei database
srvctl add instance d lmnprod-i lmnprod1 - n hwcarser290
srvctl add instance d lmnprod-i lmnprod2 - n hwcarser291
srvctl add instance d lmnprod-i lmnprod3 - n hwcarser292
Once the DB is created, mounted and open in Node1 and the above commands are executed, you define cluster_Database = TRUE and Instance2 startup and Instance 3 in Node2 and Node3.
I just want to know how Node2 and Node3 had knowledge of the DB and joined the cluster DB? What happens internally?
In General, registration in OCR is not required for the database to a cluster database.
Migration of database unique to the cluster instance consists of creation of redo and undo tablespace for the new instance newspapers and allowing this forum (thread). If the database is managed by the policy, this is done automatically for the new node.
-
Primary database is RAC and physical intelligence is the single instance
Hi all
I use Oracle RAC 11.2.0.3 as primary database, we will begin to use the Oracle Data Guard.
I am designing my infrastructure and planing to use single instance Oracle 11.2.0.3 my stand physical database.
My question is it possible to have my sleep as single instance database while the primary is RAC?
is it possible to build my Oracle database single instance ensures from the primary database to the RAC, RMAN backup?
Are there restrictions (or all of the points to consider) as my primary database is CARS while the physics of Eve is the only Oracle instance?
in the link below
[http://docs.oracle.com/cd/B28359_01/server.111/b28294/concepts.htm#i1039416]
It was mentioned that primary can be CARS or simple and even the day before, but my question is possible to have primary as CARS all on standby as single instance? or it should be like each other?
Kind regardsThe primary database can be either a single-instance Oracle database or an Oracle Real Application Clusters (RAC) database. Similar to a primary database, a standby database can be either a single-instance Oracle database or an Oracle RAC database.
http://docs.Oracle.com/CD/B28359_01/server.111/b28294/rac_support.htm
-
convert the single RAC instance
What measures are necessary in order to convert the database unique instance to the CARS?
Thank you to
Published by: user11977218 on February 26, 2013 17:00To convert single DB instance to several failure (RAC set up)
1 met the full backup of the source DB system
2. install the binary oracle clusterware binary on target m/c
3 Add the cluster environment settings to m/c source pfile*.cluster_database = TRUE
*.cluster_database_instances = 2
* .undo_management = AUTO
.undo_tablespace = undotbs (undo tablespace which already exists)
.instance_name = RAC1
.instance_number = 1
.thread = 1
. LOCAL_LISTENER = LISTENER_RAC1 4 open the node 1 m/c (source m/c)
5 'run $ORACLE_HOME/rdbms/admin/catclust.sql to create '.
cluster database from the points of view within the existing instance.
"
6 "recreate the control file if you set maxinstances to 1 when creating
the single database. »
7 "add specific in theinit .ora for the second instance parameters
instance on the second node and set the appropriate values for it:
The names may need to be changed
.instance_name = RAC2
.instance_number = 2
. LOCAL_LISTENER = LISTENER_RAC2
.thread = 2
.undo_tablespace = UNDOTBS2
.cluster_database = TRUE
.cluster_database_instances = 2
==> where LISTENER_RAC2 is an entry in the file tnsnames.ora as:
LISTENER_RAC2 =
(ADDRESS = (PROTOCOL = TCP) (HOST =) (PORT = 1521))"
8 mount the database (from 1st instance)
9 ' edit the database
Add logfile thread 2
Group 3 ('/ dev/RAC/redo2_01_100.dbf') size in the 100M.
Group 4 ('/ dev/RAC/redo2_02_100.dbf') size 100 M; »
10 change a public wire turn on database 2;
11 create an Undo Tablespace second from the existing instance
'CREATE THE UNDO TABLESPACE UNDOTBS2 DATAFILE '.
' / dev/RAC/undotbs_02_210.dbf' SIZE 200 M;
"
12 set ORACLE_SID variable ORACLE_HOME environment and on the second node.
13 start the Second Instance.
startup*****************************************
Best regards
Shishir Tekade.
My Blog: http://shishirtekade.blogspot.com -
connections user to the RAC/standby instances
Before you configure client failover practices, I tested the user login to my RAC instances.
1 I have a case of stop, of course all the connections go to body remaining.
However, when both CARS are running, any new connection goes to instance 1.
Is this normal? Is this the way supposed to be?I got a good MOS score for you... Useful power
Check * how to set up a listener to SCAN and the customer for the TAF and Load Balancing [Video] [ID 1188736.1] *. -
Disable the auto reboot of Rac instances.
Hello guys,.
We can use the disable SRVCTL command disable a particular ASM instance or instance of database Rac clusterware restarting manually if we are performing maintenance activities. but in oracle databases 11 GR 2 RAC databases can be managed or managed the policy administrator. still, there are two automatic and manual strategies. automatic with automatically restart instances. Here, if we define politics in the manual the clusterware cannot restart the database instance.
1. now, we have a RAC database with 5 cases and and defines us as manual policy. This means that, after a reboot of the system the clusterware is no longer able to restart all instances of database automatically... is that accurate.
2. we can change the current policy to another strategy using the SRVCTL change database management_policy RAC y - d... here, the management policy can be just right either automatic and manual...
help guys...Hello
Point 1 and 2 seems to be OK for oracle 11g databases rel2.srvctl y {AUTO |} The database management policy MANUAL}.
1 *. If AUTOMATIC
(default), then the database is automatically
in his previous running state (started or)
stopped) when the database host computer is restarted.
If MANUAL, then the database is never automatically
restarts after a restart of the database host computer.
A MANUAL setting does not prevent the Restart Oracle
database monitoring during operation and
restarting if an error occurs.srvctl change option
* 2.Enables allows you to change the configuration of the instance without deletion and addition
Resources of Oracle Clusterware. Using change preserves the environment in OCR
configuration which would otherwise have to be entered again. The configuration
description has been changed in the OCR configuration and a new Oracle Clusterware
the profile is generated and saved. The change takes effect when the application is
then rebooted.
For example:
srvctl change asm
Change the listening port used by Oracle ASM, the Group of disk discovery string used by
Oracle ASM or the SPFILE used by Oracle ASM for a single instance database or a
the cluster database.
Hope it answered your questions.Best regards
Rafi.
http://rafioracledba.blogspot.com/Published by: Rafi (Oracle DBA) December 2, 2010 21:39
-
Instances impossible to log into the ASM instance RAC &; ASM low-
Hello Experts,
The environment is as below:
Operating system is RHEL 5
The Oracle 10 g 2 EE database
RAC and ASM
Node2 suddenly broke down and down. The Node1 has worked very well for a few days.
But yesterday also went node1 down.cluster services are healthy and beautiful. We want to remove the archivelogs but
When we try to start the ASM instance, following error occurred:
SQL > startup force
ORA-27504: create context of OSD IPC error
ORA-27300: OS dependent operating system: if_not_running failed with status: 0
ORA-27301: OS Error Message: error 0
ORA-27302: an error occurred at: skgxpvaddr6
ORA-27303: additional information: asked the eth1 interface is not running. Output of the ifconfig command control
Please suggest any solution.
Thank you
Edited by: LazyDBA10g may 1, 2010 23:51All you have to do is to restart the surviving node. She's. Read your first post please check if eth1 is running.
By the way: eth1 cannot be the interface... vip vip interfaces like eth1: '0' - they are virtual interfaces. I´d guess eth1 is your
cluster of interconnection... If it's not available (regardless if the other node is still available or high) will refuse the ASM instance
to start.But as I have found your answers here tried to drop the node crashed so uncontrolled, which makes it worse?
If so there is a high possibility you messed up your configuration. But i´d start by checking your interfaces. If this is not
help I recommend opening a SR with Oracle.--
Ronny Egner
My Blog: http://blog.ronnyegner-consulting.dePublished by: Ronny Egner on May 3, 2010 14:10
-
Performance of the Datapump API work on a specific instance of the RAC
I'm under that DataPump matter using the DBMS_DATAPUMP API in a CCR environment. DBMS_DATAPUMP. START_JOB (handle) occasionally fails with ERROR ORA-31626: there is no job
Note metalink Doc ID: 758228.1
says "It is not possible to start or restart Data Pump jobs on a single instance of a RAC, if there is use of data pump running on other instances of FCAC."
It recommends that these jobs running on a regular instance using the DBMS_JOB. Procedure of the INSTANCE.
I am unable to do this. I tried to call DBMS_JOB. INSTANCE after I made a DBMS_DATAPUMP. OPEN to get a handle to the job, and before I called DBMS_DATAPUMP. START_JOB. The DBMS_JOB. Call the INSTANCE returns an ORA-23421: job XXX number is not a job in the job queue.
I wonder if the DATAPUMP jobs enter a different working mechanism and therefore is not accessible with the DBMS_JOB package. Would be recognizing all of the ideas on the issue.
Thank you
EMCreate a DATAPUMP service that points to one and only one of your nodes.
Then, connect to the service not to the database, instance or sid.
-
Exports off the coast of a RAC instance the same as for a regular?
Hello
I was asked to do and the export of a schema on a database instance located on a 3 RAC node.
With a common case, you simply can log on to the box, run export (or the new version of datapump)... and there you go.
However, with a RAC... I assume that since all nodes are oriented in the same datasource... it is any node log... t - it?
Simply choose export... and there you go?
Does this work if you import all back?
Thanks in advance,
CayenneHello
You can export to go and import them into any node of the RAC.
Concerning
Published by: OrionNet on May 20, 2009 16:46
-
How to rename the primary database instance after passage in the
Hi people,
To make the passage, intend to do following steps:
Connect to OEM, go to the Prdinfo DB home page, select the backup drinfo database and click switch.
Waiting for it to complete successfully. My question is that, when the transition is complete, how should we are plan to rename the DRINFO to PRDINFO? Request should still know the DB connection to PRDINFO and not DRINFO (after switchover). Can you get it someone please let me know what means this requirement and procedure to rename Drinfo to Prdinfo and PRdinfo to Drinfo (after switch)?
Thanks in advance(SERVICE_NAME = DRINFO) is a SERVICE not a SID. All you have to do is to start this service with DBMS_SERVICE. START_SERVICE after the passage or tipping. You can even do this with a trigger.
Please read this book - http://www.oracle.com/technetwork/database/features/availability/maa-wp-10gr2-clientfailoverbestprac-129636.pdf
Larry
-
Hi all
12.1.3
I am cloning 2nd instance as the UAT, but still I can't perfect it
I still have another different error even, I followed the procedure, this time, the appstier:
[APPLY PHASE]
AutoConfig could not successfully run the following scripts:
Directory: /u02/appuat/UAT/apps/tech_st/10.1.3/perl/bin/perl-je /u02/appuat/UAT/apps/tech_st/10.1.3/perl/lib/5.8.3-je /u02/appuat/UAT/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /u02/appuat/UAT/apps/apps_st/appl/au/12.0.0/perl-je /u02/appuat/UAT/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/u02/appuat/UAT/inst/apps/UAT_erp2/admin/install
INSTE8_APPLY 255 txkExecSetJaznCredentials.pl
Fate of automatic configuration with State 1
RC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyApplTop
ERROR: AutoConfig completed with errors. Check the logfile at /u02/appuat/UAT/inst/apps/UAT_erp2/admin/log/ApplyAppsTier_12111734.log for more details.
ApplyApplTop completed successfully.
# Check the race situation AutoConfig of ApplyApplTop
WARNING: The autoconfiguration service has completed with errors.
Please visit the auto configuration section in the log file. If necessary, you can rerun AutoConfig command line after you fix the problem
As we always say, please look in the log file for the defective script (which is txkExecSetJaznCredentials.pl this time) and you will find more details about the error.
Thank you
Hussein
-
Bug with renaming the tabs (4.0.0.13.80)
Hey all,.
I noticed a bug to rename tabs of the query results. If 2 or more tabs with the same name, the content of the window does not change when you select a different tab with the same name.
To reproduce:
Open a spreadsheet
Run query "select 'test' from dual;
Rename the "Query results" tab to "test".
Race explain the plan on the above statement
Rename the "Explain Plan" tab to "test".
Click on the first tab of the test, the content will still display the content of plan to explain.
If this is not the right place to post this bug, please let me know where I should post instead.
Thanks for reporting this. We recorded bug18106727 to draw it. Thank you.
-
Hi all
11.2.0.1
AIX 6.1
I restore the database backup of PROD1, PROD2.
My original db name was PROD2, and now it became PROD1. I want to rename the PROD1, PROD2 in dbname.
I googled and found DBNEWID utility.
This process is correct?
===========
Only change the name of the database
The following steps describe how to change the name of the database without changing the DBID.
- Ensure that you have a recoverable full backup.
- Make sure that the target database is mounted but is not open, and it was to stop systematically before mounting. For example:
SHUTDOWN IMMEDIATE STARTUP MOUNT
- Call the command line utility, specify a user validates with the
SYSDBA
privilege (you will be asked a password). You must specify both theDBNAME
andSETNAME
parameters. This example changes the name oftest_db
:% nid TARGET=SYS DBNAME=test_db SETNAME=YES
DBNEWID performs validations in the headers of the control files (not the data files) before attempting I/O files. If the validation is successful, then DBNEWID prompts, changes the name of data base in control files, the database stops and leaves. Here is an example of what the output for this would look like:
. . . Control Files in database: /oracle/TEST_DB/data/cf1.dbf /oracle/TEST_DB/data/cf2.dbf The following datafiles are offline clean: /oracle/TEST_DB/data/tbs_61.dbf (23) /oracle/TEST_DB/data/tbs_62.dbf (24) /oracle/TEST_DB/data/temp3.dbf (3) These files must be writable by this utility. The following datafiles are read-only: /oracle/TEST_DB/data/tbs_51.dbf (15) /oracle/TEST_DB/data/tbs_52.dbf (16) /oracle/TEST_DB/data/tbs_53.dbf (22) These files must be writable by this utility. Changing database name from PROD to TEST_DB Control File /oracle/TEST_DB/data/cf1.dbf - modified Control File /oracle/TEST_DB/data/cf2.dbf - modified Datafile /oracle/TEST_DB/data/tbs_01.dbf - wrote new name Datafile /oracle/TEST_DB/data/tbs_ax1.dbf - wrote new name Datafile /oracle/TEST_DB/data/tbs_02.dbf - wrote new name Datafile /oracle/TEST_DB/data/tbs_11.dbf - wrote new name Datafile /oracle/TEST_DB/data/tbs_12.dbf - wrote new name Datafile /oracle/TEST_DB/data/temp1.dbf - wrote new name Control File /oracle/TEST_DB/data/cf1.dbf - wrote new name Control File /oracle/TEST_DB/data/cf2.dbf - wrote new name Instance shut down Database name changed to TEST_DB. Modify parameter file and generate a new password file before restarting. Successfully changed database name. DBNEWID - Completed successfully.
If validation is not successful, then DBNEWID ends and leaves the database intact target. You can open the database, fix the error, and then resume the DBNEWID operation or continue to use the database without changing the name of the database. (For an example of what looks like the output for an unsuccessful validation, see step 3 of "changing the DBID and database name").
- Define the
DB_NAME
initialization parameter in the settings file to initialize (PFILE) to the new database name is . Note: The DBNEWID utility does not change the server settings file (SPFILE
). Therefore, if you useSPFILE
to start your Oracle database, then you must recreate the settings file to boot from the server settings file, delete the file from the server settings, change itDB_NAME
in the initialization parameter file and then recreate the server settings file. - Create a new password file.
- Start the database and resume normal use. For example:
STARTUP
Because you have changed only the name of the database and not the database ID, it is not necessary to use the
RESETLOGS
option when you open the database. This means that all previous backups are still usable.==========
Thank you
pK
These steps are quite right. Please follow the steps carefully. And special attention to step 4. concerning
Maybe you are looking for
-
iCloud newbie. You want advice
Hello Apple and Iphone are new to me. I'm scared, I lost all my photos. I was running from storage space to decided to turn on iCloud for the first time. He asked me if I wanted to sync my photos, I said yes. I'm now thinking this wasn't a good idea
-
HP Z800: Intel 750 1.2 to SSD AIC &; HP Z800 patch of compatibility
I am installing a processor Intel 750 1.2 to PCIe add to the card in a HP Z800 workstation. The HP Z800 workstation uses PCIe 2.0 and the 750 Intel PCIe 3.0. According to Intel, the 750 is actually compatible 2.0 and should work, but Intel is saying
-
Outlook express 6.0 will not remove messages from my Inbox
Quite suddenly OE will not delete messages in my Inbox after that I read the using the button Delete 'X' some but it will be no more. They can be removed by using ctrl-alt-delete. My boxes of sent and deleted items are almost empty. This has only
-
General Protection Fault encountered when reading the ARINC429 data
My program is configured to read data using a Ballard ARINC Board and write the data to a log file. It works well if no data is received, but the arrival first of valid data, the program meets "General Protection Fault... "and stops at the entrance t
-
Hello TPM is available on the HP 13-c077nr flow model? Thank you.