Rendered image using the library libimg or framework of waterfall

Similar Questions

• The file size of Photos library don't to shrink when I remove the images from the library

  Subject line pretty much sums up it.  Let's say I have create a library of Photos and import of 100 photos. The file "Library.photoslibrary Photos" grows to a certain size, as expected. But if I remove some of these pictures does not take the size of the file photoslibrary. If I import images more library file grows again, but it never reduces when I delete the images from the library. This happens with both a library of referenced files and images copied to the library.

  What happens here?

  You must either wait 30 days or go to the recently deleted album and remove not for the final to do deletion

  and note that Photos doesn't manage referenced good libraries, it was reported here that they can use more space than a managed library and they are not recommended

  LN

• I can't see the pictures in windows 7, the folder of the image in the library more images in my images. The few I managed to discover are red - terrible! Bring back the XP!

  I can't see the pictures in windows 7, the folder of the image in the library more images in my images.  The few I managed to discover are red - terrible!  Bring back the XP!

  Hi JenniferMaunder,

  ·         Did you do changes on the computer before the show?

  ·         What happens when try to view photos?

  ·         What is the format of the files?

  ·         You get the error message?

  ·         What application you use to see all the photos?

  Follow these methods.

  Method 1: Follow the steps in the article to see the photos with windows photo viewer.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Method 2: Update the latest display drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  Photo management

  http://Windows.Microsoft.com/en-us/Windows7/managing-your-pictures

• Stock Adobe watermark not removed after licenseing images in the library.

  I added several images for my first Pro CC project (2015).  The client likes to change it, so I went back to concede the images to remove the watermark. The licenses of images in my library just right and my monthly statement of image is reduced by one.  However, the image in my project still has the watermark.  Only way I can remove it is add the newly authorized version tot eh project, replace the images and then delete the original image of the water - a marked.  I thought that once I have a license of the image in the library of my projects were supposed to be updated automatically?  What I take this manual step for each image that I used in my project or I missed a button "replace or update" easy somewhere?

  Thanks for the reply from Brad!  I appreciate that I was not doing something "evil".  Help my sanity! It is therefore regrettable that most customers want to see the project as it will be no watermark, so its normal to the top on a white background and crop an image to fit a video composition and or corrections of color for a client.

  I found the work around others who seek to solve this problem in their own first Pro CC projects (2015):

  1. Make sure that when you add an image to your library project, it goes to your project folder.
     1. You can set the type via FILE | PROJECT SETTINGS | RECORDS OF WORK. Look for the entry CC libraries downloads and change it 'even in as project'
        1. This will create a "Libraries CC downloads" folder in your project file. When you add pictures/videos to your project, it will save them here.
  2. In your Premiere Pro library window, you can then add filigranées images to your project in Ctrl or right click on the desired image and selecting Add to the project.
  3. The image/video watermark will be added to your project window in Premiere Pro, in the file in your project folder and can be added to your mounting sequence / timeline (s).

  NOTE: This is the trickiest part.  In the Adobe training videos, they say everything you have to do is license then the image in the library and delicate images update automatically in your project, however, they did say not unless you directly change the image (i.e. of Chromakey, color correction, etc.) it will be is no longer auto-effacer the tattoo once licensed. (According to Brad Lawryk, you could potentially do all these things by using an adjustment layer, then move a license would be auto-updated your original unmodified image/video (I have not tested it yet).) If you do not use an adjustment layer, I found two solutions for updating your images to the new non-watermarked version.

  SOLUTION 1: Delete the original (watermark) image in your project folder and replace it through the 'library' agency CC window and then allow the Agency in question to the image/video non-filigrane

  1. These steps assume that you have changed not original filename watermarked for example, let's say the image watermark of origin you used recorded in your bin organization named "park bench". Assuming that you also set up the project to save added pictures/videos on your hard disk to the project, as described above. If you have changed the original name of the video, the following instructions will not work.
  2. Open your project from the body with delicate images.
  3. You use Finder on MAC or Windows Explorer, find the image or video that was recorded originally in the libraries of cc file downloads when you have added the watermark version and delete your file CC libraries download on the hard drive of your project.
     1. This will result in a missing/no related video/image in your Premiere Pro project window.
  4. In Premiere Pro, use the library to add the image now under license to the project.
     • This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
       • If the original image/video has been called "bench", you have now a new one called 'Park bench_1' or something similar so added to the location of project as the first picture in the body.
  • The original image "park bench" will always be that active in the sequence of project however and can now be stated as unrelated.
• Your hard project in the folder library CC download, you will have a new image or a video called "park bench".
  • If you did not remove the original in step 3, then it may be among the 'Park bench_1' as good and the rest of these steps will not work.
• In your project window, select the new 'Park bench_1' that you added (it is allowed without the watermark) and delete it.
• Now SAVE and CLOSE your Premiere Pro project.
• Reopen your project of the
  • Agency will now go and find the original image/video name in the folder downloads of CC library and Ottoman, each instance of "park bench will magically be replaced in your project with the new image and video non-filigrane.
    • Body may give you a message saying something has changed in this well, but it will allow you to charge it or link that he and you'll be ready to go.

SOLUTION 2: Use the REPLACE WITH CLIP function in the body

1. Open your project from the body with delicate images.
2. In Premiere Pro, use the library to ADD the image now under license to the project.
   1. This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
      1. If the original image/video has been called "bench", you have now a new one called 'Park bench_1' or something similar so added to the location of project as the first picture in the body.
         1. Original image "park bench" will always be that active in the project sequence.
      2. Your hard project in the folder library CC download, you will have a new image or a video called 'Park bench_1' or similar as well since the hard drive project or the project itself likes to have two the same exact file in the same place at the same time name.
3. In your project window, select the new 'Park bench_1' that you added (by simple click on it) (it is allowed without the watermark).
4. Then, Ctrl or right click on the image/video in your sequence/project schedule and select REPLACE WITH CLIP | OF THE TRAY.
   • Repeat this step for each instance of the image in your timeline.
   • Check watermarks went to each instance of your sequence.
5. Now you can remove the old watermark image/video original of your project window and your record CC download library on the hard drive of your project.

I hope that these steps will help other people who found themselves in my bind even in that I was.

• Images of the library

  Whenever I have put an image in the library, she's dating a unwanted clipping mask.  I do something wrong or is this a "feature"?

  I used to save those bits of library to the library of symbols until someone decided it was a good idea to delete libraries of symbols of the user during an update and all lost.

  Try Opt (Alt) - by dragging the elements of the document library you.

• Highlight an image in the library in a dynamic field

  Here's what I have:

  * In the library, I have a movieclip that has a dynamic field.  The MC which we call: "Foo" and the field "BlahField".

  * In the library, I have 3 graphics of the little ball that I'll call "IconA", "IconB" and "IconC.

  I read data from an external file and depending on what I find, I'll use ActionScript to add a movieclip Foo to the scene.  Now, I want a text in the BlahField, but - depending on the data - I also want to put one of the icons in the field as well.  In the sake of this example, let's say I need IconA

  ActionScript using how to place image IconA in Foo.BlahField.text (remembering I want to pull the image of the library).

  Foo.BlahField.text =? + < data from file >;

  Thank you

  -Damian

  You must use a multiline textfield and it must be large enough to display your image.

• Deleting images in the library!

  Hello, I have an image, and it of a large sheet with the series of postures for a character (like a sprite sheet) and tried out them to be animated and turn them into individual video clips.  I did successfully, but I went to delete the original image, however, video clips have become red fills.

  Is there a way I can get rid of the original without affecting the clip?

  -If not-

  I wanted to do this because I thought that it can save memory, but I don't really know if it will affect the memory since the leaf itself does not go on the stage, is there a chance that this sheet of full sprite in the library doesn't effect the size of the .swf file?

  And if she does, if I turn into a chart, or a video clip, which will not compress it?

  I use Flash CS3!

  I'm not the last word on this, but here's what can offer... If you have an image and use Break Apart to acquire parts of it, I'm sure that each piece is always a representative of all... carrying the weight of the image file you have imported.  If you delete the file from the library, you remove the reference of each piece.  However, if you take that same image and drag a copy of it on the stage and then use Trace Bitmap... you then have a graphical version of the image you can select different texts and use as you like... and you can remove the image from the library without losing parts.

  What all or part of this fact in terms of file size can be something that you can do some experiments gradually to learn... I personally don't know that the deal is here, and if I needed to know I would try just that.

• Cannot change the image of the library in Photoshop =)

  I just installed Captivate 2
  
  After recording my first demo, I tried to change the slide (the image of 'background' in the library by using the command EDIT in. This command opens MSPaint (gahh! what a horrible program!). There is no way I can see to tell him to open Photoshop.
  
  Furthermore, in the tutorial on the edition of your program that comes with the program, the film shows Photoshop being opened.
  
  In this Online Article , there is a "note" that the external program is defined during installation, but offered no such configuration.
  
  Please, help me make my editor PHOTSHOP. Thank you! = D
  
  

  Hi Monoxylon,

  I'll jump here where Rick is offline. You need to right click on the name of the image in the library, not the button Edit with. Once you do a right click on the name in the library, you will see a menu option "Edit with...". ».

  IHTH

  Best,
  Aaron

• Editing images in the library.

  
  
  Hello
  I am very new to Captivate and myself teaching on the fly. I watched the little available in Captivate tutorials and one mentioned that you can use the library for editing images in photoshop, and then automatically update in this slide in the Captivate project.
  
  When I open my library said edit edit with ImageReady. I tried and saved the image, but it won't let me save it as a PNG so I can't import into the library. I ended up opening the image in ImageReady, use it to send the image to PhotoShop, save is a GIF just remove the background of the slide, and then add the picture to the slide.
  
  This slide also had one click on the button with a text message to hover and a text message of failure that I had then to move to the front to show when you click on the page or hover the click button. It was a pain that I had to drive the background image, then use make before then bring the background again image and selecting all three components (click the 2 text boxes and the box) has not been easy.
  
  There must be a better way. Any ideas?

  Hi Nikki@work and welcome to our community

  When you right-click on an image in the library, that he opens with is often unknown. In my view, that the actual image file type determines which editor is used (assuming we have already been assign├⌐, which it can). But normally, you see "Edit with...". "as the only option you have. And once you choose that, you choose the editor desired. So even if ImageReady is already there, you should also be able to right click and choose "Edit with...". "even if she has been associated with. Then, open the image in the application of your choice.

  I've seen where once the change has been made in the other application and that you close the application and save the changes, the image is unable to automatically update in Captivate. But if it happens, it's pretty easy to image right click and choose update... from the context menu to synchronize the changes.

  It also points to something else that you should be aware. When you update the images that have been added since your hard drive, you probably think that you change only the images that are in the. CP file. But what you do really updates the image to the location where you inserted go! So if it is important that you maintain a pristine copy of the image, make sure you that you first save under a new name of file if you keep the original!

  Hope this helps a bit... Rick

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• How to make an image using the camera on my pc

  I want to take a picture of my laptop but cannot find the button

  Hi carolewyne

   

  1. What are the brand and model of the laptop?

  2. you have software installed for the camera to use?

   

  If you want to take a photo using the camera in the phone, then maybe you should use a utility support for the device that is provided by the manufacturer. It will help you get the image using the camera. You can visit the manufacturer's Web site and download the software for the device is functioning correctly.

   

  I hope this helps.

• How to use the library of Extension VPN

  Hello!

  I'll expand VPN enforcement using the library of Extension VPN. I already tried some time ago, but had no direct mechanism to develop and libvpn_ext library is not available on a simulator.

  I will use the library to open the VPN connection with a solution programmatically open source vpn, OpenVPN probably at the beginning.

  So question is, can I develop some app using this library for this application and then publish app on AppWorld?

  Thank you.

  I looked into the available VPN API, and they are not sufficient to set up your own VPN client.  So it is not possible to do what you describe.  I am not sure why we have listed what we do on our developer site.  They do not seem to offer enough to do something useful and probably just would induce in error the developers, as has happened here.  They may eventually be removed.  If I find more is coming I'll respond here, but it doesn't seem anything is imminent.

• How can I get rid of the background yellow when I display an image using the photo viewer?

  Original title: Windows Photo Viewer

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  Hi Ed

  See the following for the patch thread.

  Windows 7 photo viewer shows images with an orange and yellow tint:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/window-7-photo-viewer-shows-pictures-with-orange/e5d31c5e-ae84-4EBD-bbe9-9428f410560b

  Concerning

• Problem with copy paste function (for images) using the TinyMCE editor

  Can not copy paste images (a document - text Copies OK) to the tinyMCE editor in Windows 8. Seems to be the specific question of operating system.

  Use the tinyMCE editor for info on the download Web site. Copy-paste function works very well on a Windows7 machine

  Hi Anand,

  I would be grateful if you can help me with the following information related to the TinyMCE editor:

  1. What is the Web browser that you use to copy and paste images via the application editor TinyMCE?
  2. What exactly happens when you try to copy and paste images using the editor? You receive an error message?

  This problem may occur because of the compatibility of the browser with the TinyMCE editor.

  Check out these links and check if the suggestions help you to solve the problem:

  http://www.TinyMCE.com/forum/viewtopic.php?PID=34916

  http://www.TinyMCE.com/develop/bugtracker_view.php?id=6075

  If the problem is specific to the TinyMCE editor, you can also contact the support of TinyMCE:

  http://www.TinyMCE.com/enterprise/support.php

  Please let us know if you need more help on this issue. Otherwise, feel free to ask for more queries on Windows.