Rendering of Web page for IE9 and mode creation in CS5

Hi all

I'm working on a Web page just to add a form. Before that I added the form on the page rendered fine in all browsers as an html tag. I created the contact component in a php file and copied it the code and css in the HTML file and changed for php.

The form is running well and renders perfectly in firefox and chrome but it moves to the left of the screen in IE9 and there are problems with the style. The main problem is the dislocation of the page. I have not tested in older versions of IE that I can't install with the IE9 already on my computer.

The link is: http://www.theonlineenglishclass.com/inicio_test.php

In addition, mode creation in dreamweaver cs5, the view is shifted to the left.

I have run it through the W3C validator and while it does not throw questions to the I don't think none of them are related to this issue. I know it could be any number of issues, but if someone could point me in the right direction, I would be very grateful

Thanks in advance.

James

Alamshar wrote:

Sorry, I re-read my original post and I was not to explain the problem very well. The entire Web page moves to the left in IE9. The issue is not with the form.

My entire page is supposed to be centered with equal left and right margins.

Remove these two lines of code to the beginning of your page:

Tags: Dreamweaver

Similar Questions

  • Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?

    Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers?

    Concerning the best and warm
    Adrian Wainer

    Hello

    All Toshiba drivers for European notebook series can be found on the European driver Toshiba page:

    You can find it here:
    http://EU.computers.Toshiba-Europe.com-> support Download Center &-> Download drivers

    You will find all the latest drivers published by Toshiba

  • Help! HP Dv6 Envy - I visited Hp Web site for drivers and I found many, if you please I will...

    Good day Forum of Support Hp
    I need your help...
    I visited Hp Web site for drivers and I found many, if you please I will install all the drivers that I've seen out there?
    Thanks to you all.

    You should check whether the installation file downloaded is for the device you have - of Device Manager.

    Chipset depends on what processor you have.
    Utility Intel chipset needs, etc. management interface.
    AMD needs AMD graphics driver

    If yours is a switchable graphics system (you will be able to note the two devices in the section display adapter in Device Manager), you must install the discreet dedicated graphics driver & it integrated one (in the case of Intel being integrated) - from the download page.

    Rest you can download and try.

  • but wireless connection can't get all web pages for display on any browser

    connected to a wireless connection but can't get all web pages for display on any browsersit is connected with good strengh but does not connect

    Hello

    What happens when you connect to the router via a wired connection?

    Method 1: Reset the Internet (TCP/IP) Protocol:

    One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you are unable to connect to the Internet, TCP/IP can be causing it.

    TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility. Reference:

    Reference:

    How to reset the Internet (TCP/IP) Protocol:

    http://support.Microsoft.com/kb/299357

    Method 2: Reset the default Hosts file

    The "hosts" file is an important Windows system file which maps hostnames to IP addresses. Its a simple text file that is stored in the folder "%windir%\System32\drivers\etc\" in Windows NT, 2000, XP, Server 2003, Vista, Server 2008 and Windows 7 32-bit editions. In the 64-bit editions, it can be also stored in the folder "%windir%\SysWOW64\drivers\etc\".

    Structure of the hosts file is very simple. It contains lines of text containing the IP address, followed by the host name.

    Sometimes this hosts file is hijacked by viruses, adware, spyware or Trojan software and is changed to redirect your browser to various websites containing malicious code. It could also block security Web sites and the Windows Update Web site in your system so that you can not install virus definitions and security updates in your operating system.

    Reference:

    How can I reset the default Hosts file?

    http://support.Microsoft.com/kb/972034

  • Laptop will not load web pages for a few minutes after sleep

    HP M6-1045dx, Windows HP 64, SP1

    After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

    I've tried to follow several times:

    Disabled/enabled wireless adapter

    Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

    Did a clean install of the operating system.

    I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

    Thank you.

    Download and install the latest Intel Wireless driver

    Intel Wireless Driver version 15.2.0.19

    I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

  • How can I set a certain web page automatically start and open when I connect Windows?

    How can I set a certain web page automatically start and open when I connect Windows?  My company as a "Home Page" that I would like it to appear when I connect Windows.

    Hello.

    Yes, you can do it. The only way to do this is to create a startup items.

    STEP 1- Make sure that the home page is set correctly

    Second STEP- Creating a startup items

    How to create a startup items:

    1. Right click on the shortcut of browser (Internet Explorer, Mozilla Firefox, Google Chrome), then click on copy.
    2. Open the start menu, click all programs.
    3. Right click on the startup folder, click Explore.
    4. Right-click on an empty area of the Windows Explorer, click Paste shortcut.

    STEP 3- Restart the computer to apply the changes and see the effect

    Response to see if it helps.

  • Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

    Hello

    I ve a problem with Muse.

    Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

    Any ideas?

    Stefan

    Hello Stefan,

    Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

  • Web page in English and German

    Hello together

    Can someone help me please?

    I would like to create a web page in English and German. Is this possible with Adobe Muse?

    If Yes, can someone help me? Can you give me some instructions how do I proceed?

    Thanks in advance and best regards

    A few similar topics on the creation of multilingual multi Web sites that would give you an idea on how to do it.

    http://forums.Adobe.com/message/5063429#5063429

    http://forums.Adobe.com/message/4784235

    http://forums.Adobe.com/message/4511839

    Thank you

    Vinayak

  • Why did my web page jump down and search for programs and files on my computer analysis at the same time? This happens on a regular basis.

    I ran scans for malware with malwarebytes and microsoft windows defender and all have developed negative. Also did a clean reinstall of the windows operating system. With the help of a new mouse that works fine on another computer. Am not touch anything on the keyboard when it arrives. It is really strange, when the web page I'm on (the fact on any web page) jumps down. When it happened, I reduced to a minimum the web page and notice that, down to left, research programs, and cursor files under windows 7 is quickly back and forth its own. When this behavior ceases web pages stay normal.

    "When it happened, I reduced to a minimum the web page and notice that, down to left, research programs, and cursor files under windows 7 is quickly back and forth its own. When this behavior ceases web pages stay normal. "

    What that looks like?

    Have you tried safe mode?
    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • I can't save complete Web pages for newegg.ca

    Hi Mozilla, when I try to save complete Web pages below in Firefox 42 it fails. It creates a folder for each of them, but not the .html file. When I click on the download arrow in Firefox, it says failed. I refreshed Firefox, but it does not solve the problem.

    I can however save complete pages below in Internet Explorer 11 but I did shorten the file name. I have included the Web pages below. My card Alienware M14XR2 i7-3630QM, 8 GB of RAM, NVIDIA Geforce GT 650 M, Windows 7 Home Premium Service Pack 1 64-bit.

    http://www.Newegg.ca/product/product.aspx?item=9SIA7RD3E65538
    http://www.Newegg.ca/product/product.aspx?item=N82E16834232777
    http://www.Newegg.ca/product/product.aspx?item=N82E16834232564
    http://www.Newegg.ca/product/product.aspx?item=N82E16834232793
    http://www.Newegg.ca/product/product.aspx?item=34-232-769

    Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Web pages for e-mail will not display on my user profile

    The we page for our email appears on the side of my husband, but not on my own user.

    What e-mail program?

    Did he ever appear on your web page?

    If so:

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    See you soon.

    Mick Murphy - Microsoft partner

  • Saving as a single .html does not include the full web page (with images and properly formatted) as it did before! What happened here?

    First of all I must emphasize that I keep always up-to-date as soon as a new version of Firefox will appear.

    Now, a few months ago Firefox was able to save complete web pages as a single .htm file (including images and styles). Proof of this is that I have done it then. But now, after a few Firefox updates (sorry, but I can't identify exactly which of them might have been the one that messed up for me), while he was trying to exactly the same thing on the same website it is no longer possible. What happens is that now to choose the option 'Save the Web as HTML' (which I think is that I used to select before) it will not save the images and styles of web page, only the basic text and the home page anchors while he primarily save!

    I still have the old .htm files, I saved before (I can give them to you) and they work again properly on any PC (I tested), so it means that it is not a .htm file using the cache on my PC to render the images links to the file.

    I am aware that I can choose the 'Full page' option, but it creates a folder that I don't want to, so I'd rather have the old option to export the web page in a unique and properly shaped file that includes images!

    Thanks in advance!

  • Highlighting of certain parts of the Web page for printing

    I have a problem highlighting items to save to a file for printing of Web pages (specifically the text). If I pressed the left mouse button to highlight the text, the page is not auto scroll where the text is off the screen. An example is here:
    http://sonalacant.blogspot.com/search/label/agenda

    Ideas please, because it means I have to go back to IE for certain pages?

    Click on the first letter of the syntax you want to save (you will see nothing appear on the screen), then scroll down to the last letter of the sentence or paragraph, hold the SHIFT key and click on it. This will highlight everything between the two. Then CTRL + C to copy.

    Works in any browser or document.

  • OfficeJet 5740: 57 40 HP won't print Web pages - Internet Explorer and Microsoft edge

    I can not get the HP office jet 57402 printing Web pages. I tried with Internet Explorer and Microsoft Edge. Both recognize the printer in their printed menus. There is no printing problem of Microsoft Word or Microsoft Outlook. The printer is brand new. Would be grateful for any advice.

    Hey @Nigel2,

    Welcome to the Forums of HP Support!

    I see that you have problems with your 5740 e-all-in-one printer Officejet printing 10 Windows PC. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. If your printer is connected to your PC via a USB cable, remove it.
    2. Close any programs you have open.
    3. In your search type in printers bar and open devices and printers.
    4. Right-click on any icon of your printer listed.
    5. Click on remove the instrument.
    6. Repeat for all other icons of your printer listed.
    7. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

    Please let me know the results after following the above. If you are able to print properly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Web pages load slowly and also get an error: Web page not available.

    Original title: Asus router problem.

    Hello

    I have the ASUS RT-N66U router and a computer laptop 64 bit of Lenovo Ideapad Y500 Windows 8. I also have a bespoke of desktop running Windows 7 64 bit, but I think that this router supports Windows 7 and not 8, unless you download and update the firmware. So, using my laptop, I've recently updated it by going to the downloads section of the router on the ASUS website support. I used Windows 8 64 bits like BONES, uploaded the firmware updated on the Web site of router using the firmware file and manually restarted the router. Once again, all these have been done on my Windows laptop, 8, with the exception of restart manually. However, YouTube is still sometimes the videos loading slowly. Sometimes, when I type in a website and press ENTER, it would be just the load very slowly with a blank white screen, up to the point where he sometimes displays something like "cannot load the Web page" or something like that. Other times, the site is displayed correctly, but the Web site tab (I use Google Chrome) would always indicate that it still load. And other times, when I type in a website and press ENTER, it would load slowly. I press on enter again and it would go on the site. It's really weird. Any ideas on how to fix it?

    Thank you.

    Hello

    I try to determine if the problem is with the web browser or through the network. Check if the experience, the same question when you work on Internet Explorer and let us know the status of the issue.

    If the problem is specific to Chrome, then you will need to contact Google Chrome support for assistance.

    https://support.Google.com/chrome/?hl=en

    Hoping to hear from you soon.

Maybe you are looking for

  • How can I verify that my laptop contains a 32 GB SSD Cache?

    Just today, I received my portable Quad dvt-7000 and overall I am very happy with it.  However, my configuration must contain a 32 GB WSSD acceleration Cache on the hard drive. I can't confirm this by Speccy or even of the HP product information.  Ho

  • Pavilion DV7 Prod # B5R46UA #ABA: remove windows 7 after upgrading to windows 10

    Hello I've updated my machine to Windows 10 months ago and want to remove all the old Windows 7-64 related things that are no longer useful or necessary for Windows 10.  Is this possible?  If so, what is the process to do this? Also the partition HP

  • VISA series 2012

    Hey all,. I worked with LabVIEW 2011 to develop a program to drive a motor via the VISA series block. I've updated since for 2012, and I had problems to get the LabVIEW program to reward the engine. I have a 3rd third-party program installed that I c

  • enable all controls without property nodes

    On my FP, there are controls/indicators that are in the hidden state.  I know that I can make them visible with the nodes properties.  However, I was wondering is there a way to do it with just a few clicks?

  • Pavilion DV6137ea: Missing base system device drivers

    Device Manager reports 2 missing base system device drivers. Hardware ID are: PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C & REV_0APCI VEN_1180 & DEV_0592 & SUBSYS_30BB103CPCI VEN_1180 & DEV_0592 & CC_088000PCI VEN_1180 & DEV_0592 & CC_0880 and PCI VEN_