reorder layers

Similar Questions

• reorder layers in 2014 of the Muse

  Is it possible to rearrange the layers in 2014 of the Muse? I read in the help file I need to select the layer with the little box little from the layer name in the layer panel and then drag the whole layer to the new position. Unfortunately this does not work - if I drag the layer any content of the layer will be moved to a different layer, but the layer itself remains at the old position.

  Example: We will think we have three layers with objects inside:

  Layer_1

  Layer_2

  Layer_3

  How these layers re-arranged including objects inside, for example

  Laver_1

  Layer_3

  Layer_2

  I missed something? Someone has an idea?

  Simply by entering the layer with the mouse and drag it to the desired location.

• I can't reorder the layers in Muse even if they are not locked.

  I've seen videos where people can rearrange the stacking order of layers in the layers panel. Yet when I try they just don't move. They are not locked, and I tried the master page and a normal page. Someone at - it ideas about the reason why others seem to be able to, but I can't.

  See you soon

  Ian

  In fact, I found the solution was to restart Muse, then the option becomes available - it seemed just 1 time. It works fine now.

• How do I Center Align a group of layers?

  0 down vote favorite

  I work with Photoshop and make a java script file to automate Photoshop. But I can not find a method to center align the layer according to a document. For example I have a psd file in which layer five are horizontally side by side to side, I remove the third layer now there is an empty space against this layer, now, I want the fourth layer comes to the third place and the fifth to fourth place and all these four layers of center line according to a document. What is the shortest and simplest solution to this problem?

  Here's a script that are contiguous and centre of a group of layers. This script has no error checking, if you need to add that, if you wish. To use this script, you must have all of the layers that you want centered and aligned in a group. You must have this selected group when you run the script. The layers will be aligned in the order that they are in the the layer stack, so if you want to rearrange the positions, you must reorder the layers. You must either create a user interface to set the vertical height (in percentage) or you need to modify the script and enter the desired value. You can also modify the script so that it aligns all layers to the first layer. Right now it aligns the layers to 20% of the height of documents.

  #target photoshop
  
  var doc = activeDocument;
  app.preferences.rulerUnits = Units.PIXELS;
  
  var vertPos = 20;// percent location top of layers to top of document
  var layerArray = new Array();
  var layersTotalWidth = 0;
  var layerGp = doc.activeLayer;
  var docCenter = doc.width/2;
  
  for(var i=0;i		   

• How to choose among the layers

  I created a Keynote slide with several layers. Because the layers overlap or cover each other, how can I select a layer that is under one or more other layers if I want to organize or edit? Is it possible to see all the layers included on a given slide in order to choose the one I want to work on?

  I use Keynote 7.0 on macOS Sierra on a MacBook Pro.

  Thank you!

  option 1

  Click on the top layer of the set of objects to select, then press the button SHIFT and then on the tab on the keyboard to move to the bottom of the layer, press the tab key to move the layers

  option 2

  If your objects have an attached building you will see the object selected in the build order list

  If there is no attached effects, temporarily add an effect (blur has the least to impact on objects or melted)

  Inspector > animate > build order

  Click the object in the list of construction required to select:

  

• How to reorder the icons in the app on iPhone 7?

  When I hold down the app icon now, I get a pop-up menu. It's great practice. Which is also used to be how I rearrange and remove applications. How to reorder apps now?

  shmb wrote:

  When I hold down the app icon now, I get a pop-up menu. It's great practice. Which is also used to be how I rearrange and remove applications. How to reorder apps now?

  The same way, you just need to organize on the app slightly until it wiggles.

  Hold on the soft to hard, and it allows tactile 3D...

• How to reorder the pages in boat launch

  How to reorder the pages in boat launch?

  Hello Bob,

  Thank you for being part of the community of Apple!

  Looks like you want to change the order of the pages both in Launchpad.  If it is not possible to change whole pages at a time, you can click and hold on an application and drag it to where you want it to be.  If you want to move it to another page, drag the app to the edge of the screen, and the page will change which allows you to place it on another page.

  You can find more information about Launchpad here:

  The basics of the Mac: Launchpad is the quick way to find and open your applications

  Have a great day!

• Is it possible to choose the layers a light affect?

  Hello

  I want to make two different lighting configurations for two different texts in Motion 5. The problem is that all the lights affect on the two texts, even if I hold the texts to have their own lights. So is there a way to select which layers a light has an effect? Or is there a way to block fires to hit the other text?

  Toni

  ... not really.

  If you convert your texts in 3D, then you can use their individual lighting (without adding additional lights) controls to the 'light' them differently. You can make a 3D text look 2D taking depth to 0 and flatten the parameters 'Edge '.

• Bezier Motion 5.0.7 masks appear in the timeline panel, but in the column of layers only. This started happening yesterday. The query projects previously do not have this problem. I can't change if masks appear in the timeline panel.

  Motion 5.0.7 memory 8 GB, processor 2.93 GHz intel Core i7, ATI Radeon HD 5750 1024 MB graphics

  Bezier masks do not appear in the timeline, preventing me from editing. The masks appear in the column of layers only. The problem just started yesterday. The query projects previously do not seem to be performed.

  In the upper right corner of the canvas, there is a view menu. Check if the 'lines' are checked in the section view overlays.

• Satellite L350 - stolen between the layers of the screen

  Hey

  I have a Satellite L350-16A, and I just noticed that there is a dead fly between the multiple layers of the screen. It's really very annoying.
  Is there anyway for dead fly out of here? I don't think that it is guaranteed, however, the guarantee says nothing about the dead flies...

  Friend
  And i'm sorry for the typos in my typing. I'm not used to typing in English.

  Hello!

  If you are sure that you should go to an ASP and ask a technician for this laptop. They can tell you if it s a guarantee case or not.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Layers of abstraction appropriate to the system of standardized tests

  Hello, I am working on Standardtised test system designed for functional testing of manufactured products.

  Material, a part of the consinsts system of:

  1. system test unit, which provides the power, charges, generating functions, etc. and a PXI chassis with some devices.

  2. everything is related to a test set-up through a mass at the interface of interconnection.

  3. test contains all the material customized to the DUT.

  The goal is to have several units to test systems that could be easily interchangeable and can accept any test set-up. Any test ficture should be plug-and-play capable on any unit test system. In addition, any component of the system must be interchangeable with a component identical to SW without modification and with different components (different provider, different series, different interface etc.) with the least amount of modification to SW. This requires a hardware abstraction layer. What is not clear to me, what is the recommended strategy and how the software layers should be split between TestStand and LabView.

  Assuming that the usual layers of the Test Application-> Application specific layer-> specific to the software device - plug-in-> drivers, what should go where and how it should be implemented?

  Currently, all layers are implemented in TestStand with ASL and DSSP layers more often intertwined. TestStand sequences directly access LV hardware drivers. Adding new hardware needs to edit these two layers, but exits Test Application intact, but it is clear that this approach is not well dimensionnera.

  Plase advice.

  Thanks in advance!

  IVI is a well established and documented standard. You would have to take design decisions less and less code to write. It is easy to use MAX to assign class-specific drivers. You have existing steps on TestStand to IVI. I don't see where it's more complex than from scratch.

  If you went with IVI, I would use the types of step TestStand place class functions in LabVIEW. If it was me, and using lvoop, I would create a step customized for each class type.

• I can't get rid of the layer names in the general properties tab layers PCB Ultiboard

  A bunch of DXF layer names have been concluded by Ultiboard 10.1 error a few years during a DXF for import operation. I have recently updated to 12.0 and hope that the old layers would be eliminated. I wanted to get rid of them for a long time. I tried to delete the file ub_config in AppData, but it didn't remove them. Is that all you can think to extract them from the clutches of the program? Thanks, Tod

  Hi Tod,

  I suspect one of your design files is the cause.  If you go to Options > CFP properties > general Layers, you see here DXF layers?  If you see the layers, you can select it and then press the delete button?

• Internal matter on the placement of Vias on board four layers with TWO planes of Earth

  My design is a four-layer Board.  Surface upper and lower layers are for routing of traces and power.   Two interior floor plans (the preceding the other separated by an insulating layer) are for all ground connections.  Customer specifies that all ground connections to make for TWO inner floor plans.  When I try to place a via that will connect a trace on the outer surface to the ground, I'm not allowed to connect to more than one internal plan.

  I need to place vias completely through the Board of Directors and connect a trace in inner outer surface for TWO floor plans... Is it possible or assignment that will allow me to do?

  Ultiboard V10.0.144 running.

  Thank you

  Solved my problem.  Do inner Layer 2 the active layer, turn off all other layers.  Internal stressed Layer 2, r/c on the Properties tab copper box, click connected to the Net, drop-down list, choose DGND, apply, OK. Now place a via. R/c, choose Properties, tab, click on assume net, drop-down list, choose DGND, apply, OK.  via moment connects to the inner layer 1 so much inner Layer 2, b/c, the two are now associated with the net DGND.

  Beautiful - thank you...

• How to remove imported layers to ultiboard layers General property

  I imported several. DXF layers in a project some time ago and now they always appear in the default configuration of each new project. I tried in vain to deselect them and the value by default, but they always appear again. How can I remove them when there is no possibility to do so in the properties page?

  Thanks, Tod

  Hi Tod,

  I think what happened is that you have imported DXF layered into a project, then saved the PCB properties as default values, who then saved DXF imported as default layers. To remove these layers, you must remove your config file, which is where the default settings are saved. This will also reset your user interface and all of the default settings, you have already stored.

  Just follow the instructions here: http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

  I also created a defect (D116800) because it should be possible to remove these layers custom without resetting your configuration.

• How to remove the layers 'recovered' Ultiboard design

  I designed a 4-layer Board and later, he had to change a number of prints of the parts.

  Before, I annotated the new data of Multisim and lost two inner layers of the design (or so I thought).

  I rebuilt the two inner layers from scratch, registered and closed design.

  Open the file the next day, I discovered two extra layers "recovered." My drawing has now 6 layers.

  I tried to remove the layers recovered, but I can't do it without losing information of drilling as well.

  Is there a safe way to extract recovered segments of the design without losing the drill news?

  Thank you very much, Tod

  Hi Tod,

  "Recovered layers" is created on opening a file if Ultiboard find objects that refer to layers that do not exist in the Council. As a general rule, it should be safe to remove these layers in the dialog box properties of PCBS, because these objects are usually copper coins. First of all, you need to remove all the objects of these layers. An easy way to do it is:

  1. Right-click and hold, dragging the mouse over your design (similar to the way you would normally select with the left button of the mouse)
  2. Release the mouse button, and displays a context menu
  3. Click Select objects on layers specified...
  4. Select one of the layers 'recovered '. Click OK.
  5. Edit > delete

  (I feel like I could be missing here and if so, let me know).