Internal matter on the placement of Vias on board four layers with TWO planes of Earth
My design is a four-layer Board. Surface upper and lower layers are for routing of traces and power. Two interior floor plans (the preceding the other separated by an insulating layer) are for all ground connections. Customer specifies that all ground connections to make for TWO inner floor plans. When I try to place a via that will connect a trace on the outer surface to the ground, I'm not allowed to connect to more than one internal plan.
I need to place vias completely through the Board of Directors and connect a trace in inner outer surface for TWO floor plans... Is it possible or assignment that will allow me to do?
Ultiboard V10.0.144 running.
Thank you
Solved my problem. Do inner Layer 2 the active layer, turn off all other layers. Internal stressed Layer 2, r/c on the Properties tab copper box, click connected to the Net, drop-down list, choose DGND, apply, OK. Now place a via. R/c, choose Properties, tab, click on assume net, drop-down list, choose DGND, apply, OK. via moment connects to the inner layer 1 so much inner Layer 2, b/c, the two are now associated with the net DGND.
Beautiful - thank you...
Tags: NI Software
Similar Questions
-
all internal matter on the manipulation of join.
Hello all;
I have these two different dataset below
second seriesID test A 20 B 9 C 3 D 8 E 14 F 9
Now I wish that this wholeID Fail_test B 1 C 1 E 1 F 3
I tried to use the join internal ID for both sets, but which will leave a and d... What type of join can use... Any help is appreciated. Thank you.ID Test Fail_test A 20 0 B 9 1 C 3 1 D 8 0 E 14 1 F 9 3
HI - try this:
select id, test, fail_test, (test-fail_test) as Pass from ( select s1.id, s1.test, nvl(s2.fail_test, 0) fail_test from first_set s1 left join second_set s2 on s1.id = s2.id; ) p
Thank you
-
Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.
No, but
I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...
The other annoying problem would be the user modifies the device name when they connect it iTunes...
- the %destinataire% email - address email (the EMailAddress attribute)
- first_name % - first name (FirstName attribute)
- full_name % - full name (attribute RealName)
- % of guid guid (GeneratedID attribute)
- last_name % - last name (the LastName attribute)
- the title of the post (the JobTitle attribute) %
-% mobile_phone % the number of mobile (laptop attribute)
- short_name % name run (the RecordName, generally the name of the account attribute)
The variables of the unit are:
- % BuildVersion % - full OS version on the device
- ICCID % - ICCID (from the SIM card)
- IMEI % - IMEI (International Mobile Equipment Identity)
- OSVersion % - common version number of the operating system of the device
- ProductName % - name of the product
- SerialNumber % - serial number
- % WIFIMAC %-MAC address of the WiFi interface
-
How to decode the Last_Date_ field visited in the places.sqlite db?
I opened the places.sqlite file in Firefox SQLite Manager plug-in. I can see the field of Last_Date_Visited and it's a very large integer. I must be able to decode the date and time out of the field for a matter of human resources. Thank you
Try to use this time converter.
http://www.esqsoft.com/javascript_examples/date-to-epoch.htm
Put this whole in Option 2 and hit so far -
Purpose and structure of the place
Hello!
I need help!
How can I do the following?
1.) set the new value here - make some changes takes effect the entire table, above and are effective for the 2. wire?
I tried to structure of the place without success.
The reason is the reason for which I would like to make is: I want to avoid the always use get - set even when I'm working with objects, typically the array of objects.
so my goal is, how do I don't see only 10 values in the two tables?
-----
My real problem is the following:
I have an array with objects. The order of objects is very important, cannot be changed. I use a battery - algorithm on elements. Randomly to push a lot of elements in the stack and jump randomly. When I pop, I want to use a set method on the object, (some thing/property indicator). So I want this view to be taken into account memory.
(If used an enable simle - indexing in the loop, I would have lost the true order of the original array).
(maybe I can calculate the index of the item that I want to update, but I think that there is an easier alternative to do and I have to use the GET - set again...)
The native implementation of LVOOP is de-val and not of ref.as in most implementations of OOP. If you come from a background of OOP, think like: whenever you plug in a wire, it creates a clone of the object on the thread (or all the objects in the table in your case). As a general rule, this is the desired behavior in about 80% of the cases (when you use a LabVIEW). So consider if you can't do it by using an implementation of val.
There are several falvours enforcement by reference, where you will have the same objects on the two wires:
* private data inside the SEQ (single item queue, not replaced by one that follows)
* private inside DVR (reference data value) data
being inside DVR
which application you choose is up to you. From your image/code, I put the object inside the RECORDER. You could create the DVR with the obj in the first loop. In the secend for loop index your items and International preliminary examination to obtain the obj off the DVR for your get - set operation and place it at the back.
Felix
-
dose Microsoft security essentials not to see the place but mcafee has always said he's here
dose Microsoft security essentials not to see the place but mcafee still says he's here, because of this I can't install or uninstall completely either.
What is your level of service pack? If you are unsure, check by simultaneously pressing the keyand of windows logo button pause newsletter.
BTW, please uncheck this as replied, if the matter is not resolved. Thank you
-
No visible internal location on the client form field
Hello
I'll put in place an internal customer for the purposes of the internal application process. However, I am not able to see the field internal location on the form on the site account.
What could be the reason for this?
Thank you
Look at the recipient site. The details of the order (including the internal customer reference) management are there.
Jessica
-
Figure of the place to the pasteboard
Hi all
I created a file named lebrary, "Library.indl". Because I have two figures named 'a', 'b '. Now I have to place this account in the my document editing table.
I use CS 5.
My codes are like this:
App.Open ("C:/Documents and Settings/velprakashk/Desktop/Library.indl");
lib = App.Libraries.Item ("Library.indl");
doc = APP.activeDocument;
var img1 is lib.assets.item ("a");.
var img2 = lib.assets.item ('b');
img1.placeAsset (doc);
img2.placeAsset (doc);
I put the numbers in the document. but I did not have to be placed in the mount table.
Please provide me with friends in the right way...
Thank you and best regards,
K.Vel.
Hi John Hawkinson.
I'm really happy you appreciate... You are right... Now it works is very well...
Thanks much hawkinson...
My script is,
var x = app.open ("C:/Documents and Settings/velprakashk/Desktop/Library.indl");
lib = App.Libraries.Item ("Library.indl");
doc = APP.activeDocument;
var img1 is lib.assets.item ("a");.
var img2 = lib.assets.item ('b');
var a1 = img1.placeAsset (doc);
If (a1.length > 1)
{
var g1 = doc.groups.add (a1);
G1. Move ([-100, 0]); or for that matter
G1. Ungroup();
}
on the other
{
A1 [0]. Move ([-200, 0]); or for that matter
A1 [0] .fit (FitOptions.contentToFrame);
}
var b1 = img2.placeAsset (doc);
If (b1.length > 1)
{
var g1 = doc.groups.add (b1);
G1. Move ([-100, 0]); or for that matter
G1. Ungroup();
}
on the other
{
B1 [0]. Move ([-200, 200]); or for that matter
A1 [0] .fit (FitOptions.contentToFrame);
}
Thanks again verymuch Hawkinson...
With the best regards,.
K.Vel.
-
Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Apple has not renewed the contract with Google to access Google servers.
If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging. Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.
There is more support for iPhoto from Apple. You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
It is very likely. If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.
-
Internal error in the server on seinding a tweet
because of the "internal server error", I've resorted to EI to send the next twit. Of course, it was the Mozilla servers and not Twitter or Google
It is... uh... between puzzling and painful for me, personally, given the content twit:
CodeRush4SL: a long long time in a galaxy far, far away a group of hackers was a great idea... The rest is history.
Projekt CodeRush with slovene subtitles
Nothing big to do, except (?) honestly say to the user who has server is having hiccups.
There was a little problem with Firefox and Twitter last Thursday, but I don't know the details. Twitter support wire is rather vague: https://twitter.com/Support/status/378257740054798336
I do not use enough of Twitter (extremely rarely) to know how to assess the blame for any failure in question.
-
get a HTM document to open up the place on which it was last closed
When I opened a HTM document that I recorded on my pc, it opens at the beginning of the document. Is it possible to tell Firefox to open the document in the place on which it was last closed?
Maybe this extension:
- Bookmark text: https://addons.mozilla.org/firefox/addon/book-text-mark/
-
Since I downloaded Firefox 4, April 30, 2011, the previous button did not list that she used to give when you hovered above him, of all the places that you had been to travel to where you are on this tab. That we gave the opportunity to directly back at the beginning of his cyber-travel on this tab, or choose any other port of call on the way. Now I must return to my starting point, or to an earlier point, laboriously click after another. Hope that enough information for you to give the image.
The arrow to open the history tab of the previous buttons and following was removed in Firefox 4.
Use one of the following methods to open the tab history list:
- Right-click on the back or next button
- Press and hold the left button of the mouse on the active back or forward button until the list opens
You can watch this extension:
- Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/
-
Re: Portege M800: driver WebCam does not support the internal mic on the 64 bit OS
Hi all!
I have the problem that the internal mic in the webcam (Chicony) does not work in 64-bit (Vista or Windows7).
Does anyone have a solution for this?Best regards
SvenHello
How did you test it?
Have you checked the settings in the software assistant webcam? -
Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?
I can only have my Bluetooth speaker on or my internal speakers on my outings Sound System Preferences.
Is it possible to have both of them at the same time?
Thank you for your patientTo my knowledge, no.
Barry
-
How can I remove the Place in my application of Photos?
Hello, I come from Germany, my English is not so good, sorry:
I'm using the new Apple Fotos App. In some pictures, I give the Place name in the Drop Down field. But now I'll use this field of Information. How can I remove this field? He returned each time. Do I delete a special file or perform a backup of a few Photos, the entire file?
Thank you
What version of Photos/Fotos do you have? In the new version 1.3 of Photos in El Capitan you canremove a location in the Image menu:
Image > location > remove location.
In some pictures, I give the Place name in the Drop Down field.
I do not know which field drop-down you meant.
The kannst're auch Deutsch imagine in like.
Maybe you are looking for
-
Hello! I was wondering if Linksys offers a software that could minitor the bandwidth of each computer connected to a router. I saw a few posts asking this same question and the answers are not, but they have been since 2008. Has anything changed in t
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messagesjglhdgkljhrt gtgphsurhgklds rghe slirgh dtoghusiluhtdslhg srfhgilsdfh gdhi glt hfd slghzi l
-
PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not
Hello I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I
-
What is the difference brtween CS6 Dreamweaver and Dreamweaver CC?
What is the difference between CS6 Dreamweaver and Dreamweaver CC? It seems that the CC version is a a license, while CS6 is for life. Is this correct? If I buy the CC of Dreamweaver, it will expire after one year if I don't renew it? Will I still ge
-
submitForm - improve on it?
There are a few things I don't like about the submitForm method:(1) no way to configure the sender via javascript's e-mail account information(2) message is marked as "draft" - no option to send immediately; requires users to hit the button SEND(3) n