Repair disc command

Similar Questions

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Create the system repair disc

  I can't do a Windows 7 system repair disc.  I get the following message:

  System repair disc could not be created

  The disc has no burn checking and may pass
  contain corrupted data or be unusable (0xC0AA0007)

  To work around the problem, I could use a system repair made on another computer disc, but I have some questions about it.

  Is a system of specific computer system repair disc?  Should be used on the computer that actually?

  A system 10 Windows repair disk can be used on a Windows 7 computer?

  A Windows 7 system repair disc can be used on a computer of 10 Windows?

  I'm stuck.  Help, please.

  UPDATE:

  II found the cause of my problem and now I want to pass the information to all those who encounter this problem on similar computers.

  The computer is a RC210G-old Sony Vaio VGC, which is a strange beast, indeed.

  The computer originally had Windows XP MCE on it and a BIOS that begins with PR94510J.04T.0096

  This computer has a few tricks RAID on the motherboard, and any settings in the BIOS or Windows, empty DVD players are not recognized.  So the solution to my problem is to put a disk used in the drive to DVD - RW and THEN launch the utility to do a system repair disc.  Once the drive appears and I am asked to put a blank disc in the drive, eject the disc used and put in a vacuum before clicking CONTINUE.

  If I followed the above procedure, the disc manufacturing process goes as it is supposed to.

  Thank you for your attention.

  To get all the features of a repair disc, you must create it on any machine with the same width (32 or 64-bit) bus and under the same version of Windows.

  Disks of repair carried out under different versions of Windows can also be used, but they offer reduced functionality. The work of the command but prompt the system restore will not.

• HP ENVY m6-1117tx Notebook PC: System repair disc

  I don't have a system repair disc and I can not creat, because it seems I've lost the media player.

  I need help please

  

  I'm sorry that you misunderstood me. Follow the steps please: -.

  Step 1: Download iso Windows 10 from here:- https://software-download.microsoft.com/pr/Win10_1607_EnglishInternational_x64.iso?t=fd790faf-0310-42fa-bf0a-dc805df3451f & e = 1476504729 & h = 08a437b43cf3af38579673435bb13ce0 (ASAP link valid only for the next 12 hours)

  Step 2: Rufus open (or img burn if the dvd is used)

  Step 3: drag your iso page

  Step 4:-click Start

  For your convinience, here are some links for reference:-https://www.youtube.com/watch?v=QC_qKKFYAcc (Rufus)

  IMGBURN LINK:-https://www.youtube.com/watch?v=lizhzDX7-AI

  Click on Bravo or accept as solution if happy.

  Happy to help you @AmreenSanhotra

• error code 0 x 80070057 during a system repair disc

  error code appears when I try to do a repair of the disk system, how can we resolve this, steve.

  Follow the instructions mentioned in this article:

  Error (0 x 80070057) trying to make the system repair disc
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-0x80070057-when-trying-to-make-system-repair/2a7dfd00-6588-4cbb-9816-f40b13041da4

• HP Pavilion series p6000: Windows 7 system repair disc

  is it possible to get a repair disc without having windows 7? mine broke and I don't have an ERD. the boot sector crashed on me, so I kinda need a. im using right now it works on xp. not bad, but this computer is slow

  If you have a friend with Windows 7, a repair disc can be done.  There used to be a download for the system repair disc, but it was taken down, so you need a working Windows 7 PC group to make.  A Windows 7 installation disc can also be used - boot the disk and choose repair instead of the installation of the screen after the first screen.

• IMicrosoft 'Repair disc' has 'uninitialized' my external hard drive

  will have a problem of audio distortion and hit 'Repair disc' for my external hard drive, thinking it could be the culprit.  The program at a standstill.  When I rebooted, my external hard drive would not appear on my computer.  In disk management, it has marked as "not initialized".  It is full of critical data.  What should I do?  I am running Windows XP Service Pack 3 32-bit.  My external hard drive is a Maxtor One Touch II (now Seagate).  Thank you!

  Hi TimYX,

  This problem may be caused by the hardware failure or a bad hard drive configuration. You can try initializing the hard drive and everything should be good. If the problem comes from the configuration or failure, you will lose data and will need a 3rd party program data recovery.

• System was a dell, but everything has been changed. Should recovery/repair disc what I do?

  Original title: I need to run recovery on my xp

  I need to run a recovery/repair on my family computer for my windows xp cd, but all I can find is a for a dell xp home recovery disk. My computer was originally from dell, but we changed rooms (motherboard, CPU, ram, video card, etc.) and told me that now I can't launch an inside dell recovery disk. Is this correct? If so should what type of recovery/repair disc I do?

  That is right. The Dell recovery disk will work only on the original Dell equipment.  You will need to purchase a retail license, either a generic OEM license without brand that has never been used.

• System repair disc creation

  Product: HP pavilion dv6-6145eo

  Operating system: W7 64-bit

  Error message: System repair disc could not be created. The setting is incorrect (0 x 80070057)

  Tried to burn the disc after installing Windows. What's wrong?

  Hello

  If your laptop will not create a system repair disc, here are a few other options.

  1. you can use an other PC 64 bit of Windows 7 to create a CD to repair.

  2. you can download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to properly burn the ISO to a CD.

  Concerning

  DP-

• Failed to create the system repair disc

  When I click on 'create a repair disk' in 'Back up or restore your files', a window (insert a blank disc) flashes for a moment followed by the message "Windows repair disc has stopped working, check online for a solution and close the program or"close the program"under"view problem details"I see APPCRASH, recdisc.exe.»  I restarted the computer, but the problem persists.

  This is a new 660 Inspiron; I'm just going through the installation process.  OS is Win Home Premium, 64-bit.

  Thank you

  Peggy

  How do you have it work? This has been driving me crazy! Please, any ideas would be appreciated

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Repair disc

  When I try to create a system repair disc, I get "system repair disc. could not be created. The parameter is incorrect. (0 x 80070057). I'm running Windows 7 Pro and try with a CD - R disc.

  Why not use an image of the system which will also give you the system optionally restart tool

  Do the basics with an image utility reliable free system on a completely separate hard disk,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Macrium-reflect-by-Britec/349cfe40-3481-4F90-a20c-43c9815a2d3b

• Download the system windows 7 64 bit repair disc

  can I use my windows HP 10 PC to download the system windows 7 64 bit repair disc. If so, HOW.

  Hello

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• Format my laptop without installation disc, the system repair disc or the system image.

  I'm 15 and I need to clean my laptop HP Compaq because it's painfully slow; I have no disk Windows installation, without additional disks except the system (C :) and recovery (r :)) and I cannot create a system repair disc OR a system image.)) I lose my sanity in this laborious process, please help me!

  Have you ever run the Norton removal or the McAfee Consumer products removal tool?

  Did you know you can use the hidden restore partition to do a clean install of Windows? CF. http://support.hp.com/us-en/document/c01867418