HP ENVY m6-1117tx Notebook PC: System repair disc

Similar Questions

• error code 0 x 80070057 during a system repair disc

  error code appears when I try to do a repair of the disk system, how can we resolve this, steve.

  Follow the instructions mentioned in this article:

  Error (0 x 80070057) trying to make the system repair disc
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-0x80070057-when-trying-to-make-system-repair/2a7dfd00-6588-4cbb-9816-f40b13041da4

• HP Pavilion series p6000: Windows 7 system repair disc

  is it possible to get a repair disc without having windows 7? mine broke and I don't have an ERD. the boot sector crashed on me, so I kinda need a. im using right now it works on xp. not bad, but this computer is slow

  If you have a friend with Windows 7, a repair disc can be done.  There used to be a download for the system repair disc, but it was taken down, so you need a working Windows 7 PC group to make.  A Windows 7 installation disc can also be used - boot the disk and choose repair instead of the installation of the screen after the first screen.

• System repair disc creation

  Product: HP pavilion dv6-6145eo

  Operating system: W7 64-bit

  Error message: System repair disc could not be created. The setting is incorrect (0 x 80070057)

  Tried to burn the disc after installing Windows. What's wrong?

  Hello

  If your laptop will not create a system repair disc, here are a few other options.

  1. you can use an other PC 64 bit of Windows 7 to create a CD to repair.

  2. you can download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to properly burn the ISO to a CD.

  Concerning

  DP-

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Error code 0xc0aa0204 when creating a system repair disc

  I get an error when I tried to create the system repair disc. The error indicates that the media is upside down, (0XC0AA0204 error code). It is not upside down. How can I solve this problem?

  Hello

  With the publication of the description, I understand that you are getting an error code: 0XC0AA0204 while creating a system repair disk on your Windows 7 computer. I will certainly help you get this fixed number.

  Since the error itself says that there is a problem with the disc. While there might be a possibility of a few scratches on the disc, or it might not be readable by the optical drive.

  I suggest trying to use another drive or you can also try to use this same disc on any computer/computer to diagnose whether or not the problem is with the disc.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Failed to create the system repair disc receiving error code 0 x 80070057

  Original title: System repair

  When I try to create a system repair disc it gives me a message "the parameter is incorrect (0 x 80070057) '. In the same area every time I try to make a back-up, I get a message telling me the back-up was done, but without some missing files?

  No help available?

  Ray

  Hello Ray,

  Thank you for your response.

  I appreciate your time and your efforts.

  Please refer to the suggestions of Sharkbyter replied on 18 May 2011 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-create-a-system-repair-disc-0x80070057/66b208a9-CD48-447C-98C3-e59f3553c842

  Note: The use of third-party software and links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software and links can be resolved. The use of links and third-party software is at your own risk.

  I hope this helps.

  Thank you

• Format my laptop without installation disc, the system repair disc or the system image.

  I'm 15 and I need to clean my laptop HP Compaq because it's painfully slow; I have no disk Windows installation, without additional disks except the system (C :) and recovery (r :)) and I cannot create a system repair disc OR a system image.)) I lose my sanity in this laborious process, please help me!

  Have you ever run the Norton removal or the McAfee Consumer products removal tool?

  Did you know you can use the hidden restore partition to do a clean install of Windows? CF. http://support.hp.com/us-en/document/c01867418

• Create the system repair disc

  I can't do a Windows 7 system repair disc.  I get the following message:

  System repair disc could not be created

  The disc has no burn checking and may pass
  contain corrupted data or be unusable (0xC0AA0007)

  To work around the problem, I could use a system repair made on another computer disc, but I have some questions about it.

  Is a system of specific computer system repair disc?  Should be used on the computer that actually?

  A system 10 Windows repair disk can be used on a Windows 7 computer?

  A Windows 7 system repair disc can be used on a computer of 10 Windows?

  I'm stuck.  Help, please.

  UPDATE:

  II found the cause of my problem and now I want to pass the information to all those who encounter this problem on similar computers.

  The computer is a RC210G-old Sony Vaio VGC, which is a strange beast, indeed.

  The computer originally had Windows XP MCE on it and a BIOS that begins with PR94510J.04T.0096

  This computer has a few tricks RAID on the motherboard, and any settings in the BIOS or Windows, empty DVD players are not recognized.  So the solution to my problem is to put a disk used in the drive to DVD - RW and THEN launch the utility to do a system repair disc.  Once the drive appears and I am asked to put a blank disc in the drive, eject the disc used and put in a vacuum before clicking CONTINUE.

  If I followed the above procedure, the disc manufacturing process goes as it is supposed to.

  Thank you for your attention.

  To get all the features of a repair disc, you must create it on any machine with the same width (32 or 64-bit) bus and under the same version of Windows.

  Disks of repair carried out under different versions of Windows can also be used, but they offer reduced functionality. The work of the command but prompt the system restore will not.

• System repair disc does not work in repairing, it comes back indicating that the version of ERD is not compatible.

  Hello

  So tonight, I created an image of the system as I upgrade my hard drive then created a system repair disc and when I boot from the CD, it comes back indicating that the version of this repair disc is not compatible with windows installed even if the original drive has been deleted?

  Running Win7 Pro, SP1 new drive is a WD Black edition.

  Now!  I must inform you that I tried to upgrade to Windows 10 earlier this week and when it starts, he returned with an error xoxox and returned to Win7 but not the point of restoration I created before moving to 10 and the only way that I get using my system repair disc/image I created a week earlier weird!

  But this should not affect my image and the disc I created tonight, correct?

  Thanks for the help

  I have not installed Norton bloatware.  The easiest methods for backup are discussed in clean reinstall Windows Upgrade 10.

• Difference between the use of system repair disc and original media

  Hello

  I'm about to create a backup image of my OS, but I can see an option for a system repair disc, but in a previous question, I was told that the original install media will suffice.

  Should I create this image or only be concerned about the system.

  Thank you all.

  Just three days ago, I used a Windows 7 (without SP1) installation disc to restore a System Image of Windows 7 with SP1.

  If you want, you can create the system repair disc, but it is not necessary.

• Error code 0 x 80070057 - refuses to do a system repair disc

  There it is again!

  I tried to do a system repair disc on my hp ProBook laptop computer brand new with Windows 7. I have inserted a DVD r and hit all the right buttons but got the message "system repair disc could not be created: parameters are incorrect (0 x 80070057).» I tried with r blank CD, DVD r blank and rewritable DVD = all with the same result

  After reading a few reviews on this site, I ran CHKDSK but everything was fine. I also ran DEFRAG but get the message that it was not necessary. Then I went to Windows Live and attempted to run the CLEANING (Windows 7 version) - but, surprise, surprise - I got was a message 'we cannot install the scanner.

  What a complete and utter all my time loss is - WHY do I get error 0 x 80070057? WHY Windows Live Scanner does not install? WHY should I spend hours trying to solve this operating system, just to make a backup disk? Something I could do in 98, Me and XP with no problems at all?

  Someone has AN idea, what happens? I would really appreciate some help here to save what remains of my hair!

  If it was my computer, I would like to do a clean install now. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

• EliteBook 8570w system repair disc Windows 7

  Hi all

  I wanted to do a repair disc Windows on my Elitebook 8570w system. It's pretty easy because Hp has a program called Hp Recovery Disc Creator that accomplishes this task for you. It gives you a possibility to burn a Windows disc and a driver disc. What HP calls the Windows disk is the system repair disc.

  Now, my problem is that the Windows disk does not work correctly (no idea why). When booting from the DVD screen guard stuck to Windows is loading files... Also when I try to run the installer from the DVD, I get error messages that says 'F:\Sources\autorun.dll is not designed to run on Windows or it contains an error.' and after 'the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1]"because I had all of a sudden to make the drive I can't simply make another DVD.

  Then, I tried to let Windows do the repair system itself disc (help to create a system repair disc). However, I get a different error message: "the parameter is incorrect (0 x 80070057).» Some people suggest that HP Recovery Disc Creator has "hijacked" the function "Create a system repair disc" window and this is what causes the problem. If HP does not give me a second try, and it prevents Windows to give me a second try as well! Then, perhaps to remove HP Recovery Disc Creator would work. However, it does not list in programs and features and I can not find an uninstall file in its directory.

  When you try to find a solution I came across a guide to create a boot Windows 7 Installation USB drive (http://www.sevenforums.com/tutorials/2432-usb-windows-7-installation-key-drive-create.html). She is to copy the files from the installation of the USB disk. Step 21 details the files that are on the installation disc. They are the same as on my system repair disc.

  Download an image of the installation disk so the same as downloading an image of the system repair disc? (I download an atm file but don't know if that makes sense) If not, are there other options to create a new system repair disc? Maybe somehow Uninstall HP Recovery Disc Creator or he fool into thinking I have not yet tried to do a Windows disc? Where can I download a disk image of the repair system somewhere online (I found most of the links are dead)?

  Please let me know if additional information is required! Thanks in advance!

  Michael

  TLDR: burned a disc repair system, the disk is not working properly, HP and Windows will not let me try to burn again. Other options?

  Hello:

  You can probably make an ISO file of the version of W7 Pro you must go to the link below.

  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Use the W7 Pro from the bottom of the laptop product key to activate the installation.

  This tool allows to transfer the ISO to a flash DRIVE or a DVD drive.  The tool also performs the bootable file.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Your other option would be to order a series of W7 for your PC recovery discs, by contacting HP for the country that you live in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• Using HP Diagnostic and Win 7 HP PC system repair disc to another, even 0 s?

  A friend who has a more recent with Win 7 HP, HP nor his family know little about the period of the PC, has it completely messed. He asked me if I could fix it, to make a long story short, I can't access a large part of what. I couldn't find any Active safety system. Norton 360 trial expired, Windows Defender is disabled.  I can't access Windows Explorer or the control panel and Windows Update does not work... The list goes on and. I believe there is a major Virus in the machine by the way he told me he started acting about 2 weeks, he started when he was on the opening page after page line.

  It's funny, he thinks really that Microsoft took his machine and since he was on a Government web site (?) they are both after him!

  I told her that I need to run Recovery, probably destructive if I can't back up its files.

  I tried restoring the system to a point more a month, has not helped. I know that the first step is to get rid of the Virus, I was able to get Windows Defender working and updated, quick scan revealed nothing, and I had to start a full Scan him before I left.

  I know that if a mouth full, but here is my question... Can I try to use HP's Diagnostics and Win 7 HP system repair disc I created from my PC on his PC (same OS)? Just to see if it helps so I can get a security software installed and running before you run the recovery.

  Thanks Risingsun

  BORN OF NEW AMERICAN

  Hello

  You can certainly use the Windows 7 repair disc as long as it's the same version (IE 32-bit or 64-bit).  However, if there was a large number of malware on the PC, I would say that your suggestion to restore PC to factory settings may well be the best option as this reformatted the hard first of all - this way, you can be sure that everything has been cleared until the operating system is reinstalled.

  To perform a factory reset, there are 2 main ways. Either process will erase the data private so. 

  1. If your friend has created a set of recovery disks, insert the first and reboot the PC to start the process.

  2. Another way is to first shutdown the PC, and then tap away at f11 as soon as you press the power button and this should access Recovery Manager, which then allows you to reinstall the operating system.

  Kind regards

  DP - K

• Create a system repair disc?

  Hello:

  RE: HP Pavilion DV-7-4270us Windows 7 64-bit

  Recently, I replaced an internal hard drive on the pc that is referenced above. I have re-installed the drivers and software I want.

  My next step would be to create a System Image disc?

  (I created a restore of the system or the rescue disks while the computer is new, but it would not be installed on the new hard drive, so I'm cautious in doing that, once again, because it wasn't before).

  Thank you

  Hello:

  Yes, I use Windows 7 backup tool and do a system image and a system of disc repair, so you can access the system image.

  I recommend that you use a portable hard drive, and then you can boot from this CD to repair windows for you, select restore backup image option and have your portable hard drive connected when you are recovering.

  Windows will look for the image on your drive hard laptop usb and restore.

  You can keep the image for the new installation, that you just did, or you can keep up to date and create a new image whenever you want.

  Just know that Windows will overwrite any previous system image, you created on this portable hard drive for the PC.