Repair installation do not work

Similar Questions

• Repair disk Vista not working does not and cannot correct the disk error

  Hello. I have a disc error and my vista repair disc does not work and I do not know why.

  I tried "repair disk" in the start menu F12 and it will not work.

  Does anyone know an alternative solution for fixing windows disk repair?

  Anyone know why they would stop work?

  I too, have a mysterious GLOW RED on my screen and do not know if this is related to repair disk does not?

  It is originally the screen system 'black '.  My main screen simply vanishes in the dark and I have to restart the computer and go through everything new; checked the Direct X (up to date) and running hard drive Diagnostics, but the diagnosis breaks down due to the error of hard disk (disk repair-related?)  What is the 'RED' light on my screen?

  Thank you!!! for any input or advice!

  
  

  Hi Nansye,

  Until solve us the problem we need more information about the problem you are experiencing.

  • What is the exact error message you receive on repair disk?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • Are you able to boot to the desktop?
  • You have a Windows Vista installation DVD?

  In the monitor that you receive the red glow due to various reasons like failure to display drivers, hardware problem or if there is any what interference of electronic gadgets.

  I suggest you update to download display drivers the latest drivers on computer manufacturers site and check if it helps to solve the problem of the red light on the screen.

  You can access the link below and follow the steps to update the drivers to display on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Make sure that you do not have other electronic items kept around the screen and try to keep few away from the computer.

  If the update of the pilots is not enough, you can contact the computer manufacturer to check if there are problems with the material of the monitor and if it needs to be replaced.

  You can also run the memory diagnostic tool on your computer and check if it helps. Access the link below and follow the steps to run the tool from WinRE Windows Memory Diagnostic.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem 

  Postbacks with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

  Double post please see also /questions/925441 #answer - 326583

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• My Windows Installer does not work and I want to reinstall Windows. How can I do this?

  original title: Windows install

  My windows installer does not work. How can I reinstall my operating system?

  You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

  Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

  Hello Monica and DuaneWolfe,.
   
  
  Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
  
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-the-Windows-Installer-service-could-not-be/354c393e-CCCA-42AD-9952-4aa70bfdb336
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.

  
  Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Minoru 3d webcam installation does not work

  Why Win7 pro 64-bit. not allowing minoru 3d webcam installation wizard not working

  Hi guys I am here because I get no response from minoru and there is no forum there either. I've d/load the latest version of the driver. They installed ok but when I try to Setup Wizard I get a message saying something like the unit has stopped working. Then he ask me to close. I can use the camera as a normal but that beats the purpose of a 3d camera. Also, in the properties, he is listed as a Vimicro PC camera (Venus). Any help to solve this problem will be greatly appreciated.

  You will need to download the 64-bit drivers

  http://www.voipvoice.com/downloads/Minoru/DRV_UVC_20100202_WHQL.zip

  Best regards

  Steve Jamieson

  (Minoru)

• Free trial of Adobe Pro DC installation does not work why?

  Free trial of Adobe Pro DC installation does not work why?  The installation proceeds very slowly and simply makes anywhere between 11% and 40% before I get either a general "Error" message or one that says WebGet failed.

  I use Mac Yosemite and download of Firefox.

  You have downloaded the installer at the bottom of the link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• CF 9 installer does not work on Mac OS Lion

  So I'll try to setup CF 9 on my Mac under OS X Lion and, surprise, surprise, the installer will not work. I meet this wonderful problem on windows before, but can't remember how I solved it or I know it would be the same problem. Just to be clear, it is not an installation process has failed. The process is not yet start, Setup does not work. I know that maybe they do not support Lion, but even so, something should happen in the installer saying that the OS is not taken in charge or something.

  I checked the logs from the Console, and this is the error that is coming:

  MacBook com.apple.launchd.peruser.501 [94] ([0 x 0-0x2a6ba69]. (ColdFusion 9 install [96113]): posix_spawn ("/ users/tmessier/downloads/ColdFusion 9 Installer.app/Contents/MacOS/adobe_cf",...): permission denied

  No idea what it really means, I always run facilities in this same directory and never had a problem. I'm guessing that maybe it is trying to copy the installation files to archive somewhere and execution of this directory and fails, but do not know how to fix this problem.

  Any help would be appreciated.

  I installed ColdFusion over 100 times on many operating systems and do not remember ever having a problem. So, I find your difficult bitterness. I get as frustrated with people who get immediately outraged a problem like this, especially when trying to make something that is clearly not supported.  CF9 is not compatible with the Lion, so try not to get so frustrated with Adobe when you try to do something they never claimed that you should be able to do.

  That said, I'll try to help.

  First of all, are you aware that the Lion does not come with Java?  Have you installed it?

  Second, have you check the permissions on the installer execute. Who owns the file? It does not matter if you have run the installer from the directory before, files can have their own authorization. Maybe something with your got buggered. Worst case, you could just put it to 777 (remember that a .app is a package, you must recursively process the file permission changes.  chmod - rf 777 ColdFusion\ 9 Installer.app).

  You can always try to download the file again.

  Hope that helps. If it is not could you also want to check this out: http://superuser.com/questions/361475/com-apple-launchd-com-apple-launchd-peruser-error

  Jason

• Windows VISTA BIT missing Modules! Updates to the installer will not work.

  MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

  Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

  Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

  Thank you, DRC

  Hi DCassie,

  1. Have you tried the 940520 full KB?

  If you have not completed the Ko 940520 try the full article and check if it works.

  If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows will not start and repair functions do not work

  Hello!

  A few days ago when I turned on my laptop, it said 'unable to start Windows. A recent hardware or software change might be the cause. «I tried to solve the problem through the installation and repair of computer disk, but the startup repair does not seem to do anything be said "Startup Repair couldn't fix your PC (it ran four times), System Restore cannot find a restore point (sometimes he says that I have to specify which Windows installation to restore the good I don't have one) and refresh your PC says that the» drive is locked. Furthermore, each operation in the repair of your computer takes really long, on one or two hours. It's Windows 7 Ultimate x 64, I'm talking about.

  In addition, I can not in safe mode as button by pressing f8 (or f5) ends with a sound signal and guest starts with x:\sources instead of c:\windows so minimal safeboot / network does not work.

  I also tried to use explorer.exe to copy the most urgent files to a usb flash drive, but it does not display the files in c:.

  Any ideas?

  Thank you and best regards.

  I suspect that you need to perform a destructive factory restore. Here are a few options to recover your files:

  • From your external backup. If you do not have an external backup, then this is a great time to review your backup strategy.
  • By starting the machine Mode of repair of Windows, and then using the console commands to copy your files to a flash drive. Post again if you need help with these commands.
  • By starting the machine with a boot of Ubuntu CD, then drag your folders to a flash drive.
  • By removing the hard drive and plugging it into another PC. Use a SATA cable if it is a drive 3.5 "or a USB enclosure so it's a 2.5 drive".

  The above methods are much more time that executing regular backups on a backup drive GByte 1 costs about $60.