Repair Windows XP

Similar Questions

• Cannot repair Windows 7 on the Satellite Pro C650 18U

  Since getting my new laptop Toshiba in October, I had endless problems. It's going to be big, but I guess that relevant to the cause of the problem.

  My first problem with him has come to uninstall McAfee. I was able to do a full restore (it was new so had nothing to lose but time) and got a tool to get rid of everything that McAfee.

  All very well for a while, using AVG free antivirus. It was December before when AVG does an update that causes Windows 7 crash, usually when you sign off the coast. I was not using the machine a lot like Christmas and it seemed to work ok if I turned off, went in safe mode, normally closed then loaded windows normally. At this point, I knew not that the problem was of moy. But due to start working again, I needed to make it work properly, so I spent some time searching online (on my PC) and discovered the problem of the AVG. He had a so bad I could do nothing even in safe mode. By clicking on any AVG associated icon or file crashed the entire system. I found a fix to keep AVG running by renaming a couple of exe.bak of exe files. It worked and the computer was working normally, but I had to get removed AVG that proved impossible because I still couldn't get everything what key of AVG to do anything at all.

  I installed a free trial of an uninstall program, RevoUninstaller. It took most of the day, but finally it has deleted everything. One of the steps is to run the uninstall program of the selected program where he stopped for hours and the next step in the list of all the remaining files showed thousands of hundreds of other files and registry files, so I guess that the uninstall program does not work at all and revo removed all.

  The next day, the computer went well. I installed avast and everything was going well with one exception - the product preinstalled toshiba update program.

  The day after BSOD. I tried startup repair, you have 20 minutes to a black screen with a blinking cursor, possibly a pointer of big white mouse and nothing else. Tried safe mode, when it is run through the list of files, just to stop for a while and had no further. Dug my disk to repair windows 7, put that in, start from it, has had the same problem with the Startup Repair tool, empty large needle on a black screen.

  So what do I do next? I have the windows XP restore disk came with the laptop. I try to boot from that? If I have TO I could still do an another factory restore but I have some files on there and I'm pretty p off would be constantly having to bother with this machine.

  It was suggested to me on another forum that the problem could be with the machine, such as Windows 7 should not have these problems with the antivirus. It is still under warranty.

  Many thanks in advance.

  Hello

  Yes, you can use the Windows XP disk to install Windows XP on your laptop, but then Windows 7 is removed and t, you can use it, you can expect you reinstall Windows 7.

  Did you create the Toshiba recovery disc to install Windows 7? Using this disk, you can restore Windows 7 to factory settings. This means disk HARD will be deleted and with all the tools and pre-installed Windows 7 driver will be installed automatically.
  Just check your manual for more information.

  But the problem is if Windows doesn't boot you are not able to create this disc
  You can use the recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  If not and you want to return factory settings you can order a new disc of Windows 7 here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Trying to repair Windows XP, I get a message that my product key is not valid.

  How can I get a new key as my invalid siad

  When you try to install the compatibility pack office my computer says that the installation service was not running so I went serivces and started and tried to new still siad that it did not work so I ask to technician in ICT windows help hw siad I need to recharge or repair windows, so I tried to fix it when he asked me my product key I put a button on my computer and it siad it wasn't valid CD key and now I can't use it as it not activated the computer scientist said if I ask for a new key microsoft

  When you try to install the compatibility pack office my computer says that the installation service was not running so I went serivces and started and tried to new still siad that it did not work so I ask to technician in ICT windows help hw siad I need to recharge or repair windows, so I tried to fix it when he asked me my product key I put a button on my computer and it siad it wasn't valid CD key and now I can't use it as it not activated the computer scientist said if I ask for a new key microsoft

  Keys are not given. The key on your computer is for Windows. You will need to find the key for your office.

• Repair Windows scam - cannot control panel access control or workstation "Windows Explorer has encountered a problem and needs to close."

  Original title: repair Windows scam - Can can't Access Control Panel or workstation

  My system has been recently infected with "Windows" repair"virus. I managed to delete using Super Anti-Spyware, but all my desktop shortcuts are gone (hidden) so I downloaded "Unhide.exe" and get all my shortcuts. Most of them seems to be working as before, but there are a few, such as 'My Computer', ' Panel, "My Documents", or even "Windows Explorer", which I can't access.» When I try to open them, I get this popup box saying "Windows Explorer has encountered a problem and needs to close" how much he out me of my office of kicks.

  Any suggestions?

  Thank you!

  Brian

  The best way to solve this maybe just create a new user account, transfer your personal data to this account, and then delete the old account. Make sure that you perform the system restore after you did the new account and everything works fine. To purge the system restore, simply disable it then again. Be aware that the creation of a new user account is not the means to get rid of malware. But it is perhaps the best way to get rid of some of the after effects. However, I recommend you scan with Malwarebytes before running these instructions. After scanning you may not create the new account.

  In addition, Jose is correct. Good number of new forms of malware prevent the start in safe mode. Trying to force booting in SafeMode with msconfig, you end up with a boot loop.

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• Stop error 0x000000ED (0x82A89850, 0xc0000006, 0x00000000, 0x00000000) try to repair windows from the installation cd

  I get this error for "unmountable _Boot_volume.  I read all the tips and suggestions.  I tried to repair Windows using my Windows installation CD.  And it does not work.  Any suggestions?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/297185

  It will be useful.

• I have a fake virus "Repair Windows" on a user account, how do I get rid of him?

  HI - one of my user accounts has a false /virus program called "Repair Windows", which is ruining the PC, turning a drive off frag and asking me to purchase a service?

  How can I get rid of him?

  Download malwarebytes then update then do a full scan. First turn off System Restore

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• repair Windows XP file system, some files lost

  How to restore my version of XP?
  repair Windows XP file system, lost files, and the sound card does not even if the drivers are installed. Themes are absent and some programs don't is not loading, connection WI - FI will not charge. System Restore does not work.

  tonythesiskolee,
  I would like to get some clarification.  When you say 'repair Windows XP' what talking you?  Did you run the System File Checker or that you are trying to make a repair to a XP disk installation?  You get an error when you try to run the system restore?

  There are two ways to restore your system.  If you have set up and run a backup utility, it would be the best way to restore.  Or you can reinstall XP.  This article covers the different installation options available.  Or if you have an OEM drive or restore partition, you can then follow the instructions to do a factory restore. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Repair Windows Vista Home Basic

  My laptop cannot install Windows updates and recommended corrections have failed. The final recommendation is to repair Windows Vista. However, the version of Vista on the disc of the operating system provided by Dell has only the possibility of a complete reinstallation. I had already made the mistake of thinking that I can do a repair and ended up with a complete re - install which of course erased everything on my drive. Anyone know how I can repair Vista when that option not on the disc?

  Hello

  You will need to borrow a Microsoft Vista DVD from a friend to do a repair upgrade installation.

  Recovery discs are generally not those 'repair' options on them.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

  whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

  Hi leonardhurley,

  Since when are you facing this problem?

  You did changes before this problem occurs?

  What is the exact blue screen error message you received?

  Method 1

  I suggest that you perform the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

  Method 3:

  I suggest you to follow the article below for the Blue error screen.

  http://support.Microsoft.com/kb/958233/en-us

• Windows 7 starts but I get repair window

  When I ask Microsoft to download the ISO image file I tells me you have a preinstalled windows 7 ask the manufacturer and Builder ISUS said if it does not buy a new windows 7 CD... All laptops are preinstalled without discs is so why saying MICROSOFT can't stop... My laptop is a bit more than 2 years and I can enter the BIOS and windows repair window but he asks that the windows 7 CD... I just need to open to get my docs and photoos and .pst files... Where can I download files from windows boot 7. Please Urgent... ;-)

  You can use Chrome and this process for the iso version whatever Windows you need

  http://www.gHacks.NET/2016/02/17/download-Windows-7-and-8-1-ISO-images-from-Microsoft/

  Then follow this procedure for a painless as possible install

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  To retrieve the files, you might be better to use a live linux install flash

  http://www.SevenForums.com/software/198909-lucid-puppy-way-recover-files-non-bootable-computer.html

• Start loop repair, Windows 7, RebuildBcd said that no Windows installs?

  Windows 7 - ASUS G50 Vt - X 1 - after an uninstall of big, Windows will not go beyond the start screen. Given the possibility of using the Startup Repair, the console tells me that it cannot solve all the problems. Windows asks me if I want to use SuReP Console, it starts everything straight through. After using my installation disk to use other tools to repair, the function RebuildBcd tells me that there is no installation of Windows. I need this computer to work. WHAT I DO?

  Hello

  Start with a Windows disk.

  At the command prompt (press on enter after each)

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Very often, after the foregoing (and similar methods of bottom) you need to run
  Repair system TWICE - then run beboot towards the Windows disc and run again.

  ===============================================================

  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.