Repetitive crashing on xp reload
Howdee people,
OK lets get the specifications of how first - it is a N200 0769 ECG-1 GB of RAM 160 G WD Scorpio
first to the high sound got the bios more strange rev - 2.03 (68ET31WW) - which doesn't seem to exist on the support site list
OK now to the aggro.
copy all the files requiring one record to another sata the OS partition format, fat32 part left in place.
YES AHCI mode is disabled b4 someone said...
With intel inf slipstreamed SP3 goes through all the motions and breaks down in the same place each time loading devices... 35 minutes to go etc...
Now, my logic dictates that its faulty RAM or the power reg, but I ran memtest for 8 hours without a glitch so that's also a passage in my book, the hard drive seems to check (new hirens - you name - I ran it) so I left scratching my head
Other pearls of wisdom people (b4 it gets a rock ' n roll out of my apartment)?
Tags: Lenovo Notebooks
Similar Questions
-
Windows Vista (32 bit) repetitive crashing
My Windows Vista Home Premium 32-bit (Dell Inspiron 531) has been crashing a lot lately. A picture of what is happening on my screen is here -http://pops23.blogspot.com/2010/06/anyone-have-this-happen-to-their-ms.html
I can restore the system to run again after a few tries. Then it will crash again do the same thing. This has happened for a month.
I have re-installed Vista (clean install) a week and a half. And I always have the same question. Any ideas out there?
Specifications - graphics card - 128 MB NVIDIA GeForce 8300GS
Monitor - monitor flat screen 19 inch SE198WFP Widescreen
Thank you! ~ Josh
Hello
When there is little specific information to direct the thrust of your approach it is often preferable to attack
with a wide range of methods. Use below thoroughly and please, I beg you, do not jump
around practically everything what could be the cause of the accident.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I had to reload my computer after a virus attack, but I lost my Photoshop Elements 9.
I lost my disc to reload then, how can I do this?
I have S/N
Can anyone help?
PSE 7, 8, 9 downloads - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
-
It seems that when I update my contacts or calendar, or email, or roughly 'something' that requires text input hold out. It's like hitting very was controlled and matched / duplicated elsewhere. I would prefer to allow me to do anything about it either, I have do locally and then do everything he does brings my camera stopped.
Try this and see - restart your iPhone, iPad or iPod touch - Apple Support
-
Laptop HP 2000-120CA crashed shortly after reloading software factory
I've had this laptop for less than two years. He was always 'freeze' etc, trying to access other MSE or perform any function, and finally, it wouldn't start up.
I got original software of HP, several weeks ago, and with the help of a hp technician, I reinstalled the software and it worked fine. This computer is only a spare part that I use ipads for my needs, as listening to the radio or news
Yesterday, while in ms Explorer, the screen went black. I restarted computer and when he arrived at the "WELCOME" it became black again.
I then restarted the computer in safe mode and it starts correctly.
I have used records of repair that accompanies the computer nothing works.
I then reinstalled the software and has spent 15 hours doing so and now it works now, but for how long.
I had this laptop windows 7 for less than two years and have had no satisfaction with it, he still never replied.
What is my recourse, the warranty is over. I should have brought the computer within the time required by Best Buy, that the problems were present from the beginning.
Detective Conan of OTC by HP amd me
pumpsie
-
I had a drive hard crash and have reloaded it... The computer I have is a HP that is 6 years old and "stale" so there is no help. All software provided with the computer are cong. I don't have the product key for Microsoft office 2002, but not the disk. Any suggestions
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246Never be afraid to ask. This forum has some of the best people in the world to help.
-
original title: crashing
My computer has been crashing. I reloaded Vista and deleted everything before that, but it still crashes. I get this message when it reloads:
More information about the problem:
BCCode: d1
BCP1: 0000003C
BCP2: 00000002
BCP3: 00000008
BCP4: 0000003C
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini080410-01.dmp
C:\Users\Leo\AppData\Local\Temp\WER-13429424-0.SysData.XML
C:\Users\Leo\AppData\Local\Temp\WER2F0.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
Does anyone know what I can do to fix this?
Thank you
Leo
If you reloaded Vista and that you always get the question, it's almost certainly some kind of hardware problem. Take the computer to a repair shop of computer with a good reputation for service (or to return to the manufacturer for repair - compare the costs, guarantees, calendar, reputation, effort and any other factor that you consider important and make a decision). If you can, I suggest you backup your data before you send it that there is a good chance that they will wipe the drive in the service process.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Can not get sound to work since the reload of Windows Vista
Original title: my computer crasheds had to reload Windows Vista. dowloadeds the disk windows drivers. still no sound. all say sound card diagnostics works
my computer crashed. HADS reloads of windows Vista. I downloaded the audio driver of windows disk, still no sound. all say sound card diagnostics works
Try to download the drivers on the support site for your computer manufacturer. You will need to provide the model number of your computer.
-
TaskHost.exe crash, repeating the dllhost.exe crashes (Win7 x 64 SP1)
It has been that rampant in me for over a week. I login and immediately taskhost.exe accidents, then repeat accidents of dllhost.exe. The fault for both module is always esent.dll.
Not to mention that repetitive crash dialogs, there are also other problems:
-Windows Help does not work correctly. After opening, I repeatedly to shut the windows of error just so that he could respond and whatever whether in the search returns 0 results.
-CHM files have the same problem of response as above and also will not show the embedded images or style sheets (like if it cannot access its own embedded files).
-Internet Explorer won't display certain content, IE: YouTube videos, some .webm files.I tried a variety of things and had no chance to solve the basic problem.
-J' did a full scan with MalwareBytes and Avast antivirus - no viruses and no malware.
-J' tried to manually replace the (dllhost, esent) files to another Windows 7 system - no change.
-J' tried SFC/scannow - no files don't need replacement - no change.
-J' tried to start in safe mode - no change.
-J' tried a "clean boot" - system running unbearably slow and no change.
-J' tried to delete/uninstall 3rd party codecs - no change.
-J' uninstalled and reinstalled IE11 (a chore in itself) - IE had disappeared, the accidents stopped, but after reinstalling it is back to crashing (and leaving aside other issues caused IE).The only thing that stops the constant error dialogs must remove dllhost.exe or esent.dll. Of course, none of these options is acceptable because it does not fix the other issues and other causes. And now I get a notification that my Windows think more that it is authentic, and when I tried to validate, the page threw a bunch of script errors me (perhaps because IE does not work correctly).
My next step and the last resort is to reinstall Windows, unless someone here can help. Below is all the information I can think to provide at the moment, I look forward the responses and thanks for reading so far.
Great big giant info dump:
Speccy system specifications:
-------------------------Operating system
-Windows 7 Home Premium 64 - bit SP1
CENTRAL PROCESSING UNIT
-AMD Phenom II X 6 1090 t.
RAM
-8.00 GB Dual-Channel DDR3 @ 803 MHz (11-11-11-29)
Motherboard
-Gigabyte Technology Co., Ltd. GA-990XA-UD3 (Socket M2)
Graphics
-2047 MB NVIDIA GeForce GTX 770 (EVGA)
Storage
-Unit of disk SATA 1863 GB Western Digital WDC WD20 EARS-00MVWB0 (SATA)
-117GB SanDisk device (SSD) SATA drive SDSSDP128G
-465 GB Seagate ST350041 8AS device SATA (SATA) drive
Optical drives
-Ring road. CdRom TSSTcorp CDDVDW SH-S243D SATA
Audio
-Realtek High Definition Audio
-------------------------Each process dumps:
-------------------------
TaskHost.exe https://www.sugarsync.com/pf/D7279007_05454644_6291585
Dllhost.dll https://www.sugarsync.com/pf/D7279007_05454644_6291587
-------------------------Application event viewer errors:
-------------------------
(taskhost.exe crash)
Name of the failing application: taskhost.exe, version: 6.1.7601.18010, time stamp: 0x50aee9f3
Name of the failed module: ESENT.dll, version: 6.1.7601.17577, time stamp: 0x4d79bfba
Exception code: 0xc0000005
Offset: 0x000000000000994e
ID of the process failed: 0 x 700
Start time of application vulnerabilities: 0x01d2205f6e7f6485
The failing application path: C:\Windows\system32\taskhost.exe
Path of the failing module: C:\Windows\system32\ESENT.dll
Report ID: b326cd88-8c52-11e6-83c3-010101010000
-------------------------
(crash dllhost.exe)
Name of the failing application: DllHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca54
Name of the failed module: ESENT.dll, version: 6.1.7601.17577, time stamp: 0x4d79bfba
Exception code: 0xc0000005
Offset: 0x000000000000994e
ID of the process failed: 0x1d30
Start time of application vulnerabilities: 0x01d220659e679891
The failing application path: C:\Windows\system32\DllHost.exe
Path of the failing module: C:\Windows\system32\ESENT.dll
Report ID: dc1e9382-8c58-11e6-83c3-010101010000
-------------------------AppCrashView (from NirSoft) details:
-------------------------
(taskhost.exe crash)
Version = 1
EventType = APPCRASH
EventTime = 131202933512950376
ReportType = 2
Consent = 1
ReportIdentifier = b326cd89 - 8 c 52-11e6-83 3-010101010000
IntegratorReportIdentifier = b326cd88 - 8 c 52-11e6-83 3-010101010000
Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = TaskHost.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 6.1.7601.18010
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 50aee9f3
GIS [3]. Name = name of the Module fault
GIS [3]. Value = esent.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value = 6.1.7601.17577
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 4d79bfba
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 000000000000994e
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.1.7601.2.1.0.768.3
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 4105
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 85f4
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = 85f4492f4d29dd658d223aa949c9df0d
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = 2157
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = 215786c06e468ad885bd834325a4b91b
UI[2]=C:\Windows\system32\taskhost.exe
UI [3] = host process for Windows tasks has stopped working
UI [4] = Windows can check online for a solution to the problem.
UI [5] = check online for a solution and close the program
UI [6] = check online for a solution later and close the program
UI [7] = close the program
LoadedModule[0]=C:\Windows\system32\taskhost.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\msvcrt.dll
LoadedModule[5]=C:\Windows\system32\ole32.dll
LoadedModule[6]=C:\Windows\system32\GDI32.dll
LoadedModule[7]=C:\Windows\system32\USER32.dll
LoadedModule[8]=C:\Windows\system32\LPK.dll
LoadedModule[9]=C:\Windows\system32\USP10.dll
LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
LoadedModule[11]=C:\Windows\system32\OLEAUT32.dll
LoadedModule [12] = C:\Windows\system32\IMM32. DLL
LoadedModule[13]=C:\Windows\system32\MSCTF.dll
LoadedModule[14]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[15]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[16]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[17]=C:\Windows\system32\uxtheme.dll
LoadedModule[18]=C:\Windows\system32\dwmapi.dll
LoadedModule[19]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[20]=C:\Windows\system32\MsCtfMonitor.dll
LoadedModule[21]=C:\Windows\system32\MSUTB.dll
LoadedModule[22]=C:\Windows\system32\WINSTA.dll
LoadedModule[23]=C:\Windows\system32\WTSAPI32.dll
LoadedModule[24]=C:\Windows\System32\PlaySndSrv.dll
LoadedModule[25]=C:\Windows\system32\wininet.dll
LoadedModule[26]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
LoadedModule[27]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
LoadedModule [28] = C:\Windows\system32\shlwapi. DLL
LoadedModule[29]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
LoadedModule [30] = C:\Windows\system32\version. DLL
LoadedModule[31]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
LoadedModule [32] = C:\Windows\system32\normaliz. DLL
LoadedModule[33]=C:\Windows\system32\iertutil.dll
LoadedModule[34]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
LoadedModule[35]=C:\Windows\system32\USERENV.dll
LoadedModule[36]=C:\Windows\system32\profapi.dll
LoadedModule[37]=C:\Windows\System32\HotStartUserAgent.dll
LoadedModule[38]=C:\Windows\system32\slc.dll
LoadedModule[39]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
LoadedModule[40]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[41]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l2-1-0.dll
LoadedModule[42]=C:\Windows\system32\ESENT.dll
LoadedModule[43]=C:\Windows\system32\psapi.dll
LoadedModule[44]=C:\Windows\system32\SHELL32.dll
LoadedModule[45]=C:\Windows\system32\WINMM.dll
LoadedModule[46]=C:\Windows\system32\dimsjob.dll
LoadedModule[47]=C:\Windows\system32\taskschd.dll
LoadedModule[48]=C:\Windows\system32\SspiCli.dll
LoadedModule[49]=C:\Windows\System32\netprofm.dll
LoadedModule[50]=C:\Windows\system32\NSI.dll
LoadedModule[51]=C:\Windows\System32\nlaapi.dll
LoadedModule[52]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[53]=C:\Windows\system32\rsaenh.dll
LoadedModule[54]=C:\Windows\System32\npmproxy.dll
LoadedModule[55]=C:\Windows\system32\pautoenr.dll
LoadedModule[56]=C:\Windows\system32\WLDAP32.dll
LoadedModule[57]=C:\Windows\system32\certcli.dll
LoadedModule [58] = to C:\Windows\system32\ATL. DLL
LoadedModule[59]=C:\Windows\system32\CRYPT32.dll
LoadedModule[60]=C:\Windows\system32\MSASN1.dll
LoadedModule[61]=C:\Windows\system32\certenroll.dll
FriendlyEventName = Stopped Working
ConsentKey = APPCRASH
AppName = host process for Windows tasks
AppPath=C:\Windows\system32\taskhost.exe(crash dllhost.exe)
Version = 1
EventType = APPCRASH
EventTime = 131202959849153989
ReportType = 2
Consent = 1
ReportIdentifier = d4eda68e - 8 c 11e6-58-83 3-010101010000
IntegratorReportIdentifier = d4eda68d - 8 c 11e6-58-83 3-010101010000
Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = Dllhost.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 6.1.7600.16385
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 4a5bca54
GIS [3]. Name = name of the Module fault
GIS [3]. Value = esent.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value = 6.1.7601.17577
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 4d79bfba
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 000000000000994e
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.1.7601.2.1.0.768.3
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 4105
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 70e1
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = 70e1120d63c5115671330951716cace5
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = c36e
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = c36e6674224141161a525e685bbfbad1
UI[2]=C:\Windows\system32\DllHost.exe
UI [3] = COM Surrogate has stopped working
UI [4] = Windows can check online for a solution to the problem.
UI [5] = check online for a solution and close the program
UI [6] = check online for a solution later and close the program
UI [7] = close the program
LoadedModule[0]=C:\Windows\system32\DllHost.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\msvcrt.dll
LoadedModule[5]=C:\Windows\system32\ole32.dll
LoadedModule[6]=C:\Windows\system32\GDI32.dll
LoadedModule[7]=C:\Windows\system32\USER32.dll
LoadedModule[8]=C:\Windows\system32\LPK.dll
LoadedModule[9]=C:\Windows\system32\USP10.dll
LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
LoadedModule [11] = C:\Windows\system32\IMM32. DLL
LoadedModule[12]=C:\Windows\system32\MSCTF.dll
LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[14]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[15]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[16]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[17]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[18]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[19]=C:\Windows\system32\rsaenh.dll
LoadedModule[20]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[21]=C:\Windows\system32\uxtheme.dll
LoadedModule[22]=C:\Windows\system32\wininet.dll
LoadedModule[23]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
LoadedModule[24]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
LoadedModule [25] = C:\Windows\system32\shlwapi. DLL
LoadedModule[26]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
LoadedModule [27] = C:\Windows\system32\version. DLL
LoadedModule[28]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
LoadedModule [29] = C:\Windows\system32\normaliz. DLL
LoadedModule[30]=C:\Windows\system32\iertutil.dll
LoadedModule[31]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
LoadedModule[32]=C:\Windows\system32\USERENV.dll
LoadedModule[33]=C:\Windows\system32\profapi.dll
LoadedModule[34]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
LoadedModule[35]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l2-1-0.dll
LoadedModule[36]=C:\Windows\system32\SHELL32.dll
LoadedModule [37] = C:\Program may Explorer\sqmapi.dll
LoadedModule[38]=C:\Windows\system32\ESENT.dll
LoadedModule[39]=C:\Windows\system32\psapi.dll
FriendlyEventName = Stopped Working
ConsentKey = APPCRASH
AppName = COM Surrogate
AppPath=C:\Windows\system32\DllHost.exeHello
We recommend posting your query to Microsoft TechNet for advanced troubleshooting.
Thank you.
-
Repeatable crashes on properties >; additional metadata (mac)
Hi all.
New user here.
I just bought CS5.5 at my local Mac store and am running Acrobat Pro 10.0.0.
I'm working with pdf metadata but I get repetitive crashes on a file > properties > additional metadata (click once or twice) on my pdf /all/. This is regardless of the source of the pdf file and it was repeated after the removal of several Adobe plists as reproducible on a Test account. It also happens on my MacBookPro and my Mac Pro. I am running Snow Leopard.
Apparently advanced technical Assistance is supposed to get back to me in the next day or so. Did anyone had this problem and/or has an idea of where to go to fix this? Is someone using this feature on Mac with success?
Thank you
J
Adobe does not confirm the dates of any future bugfixes to the public. Each bug is prioritized based on severity and complexity, as well as the calendar is constantly evolving. Thank you it's frustrating.
Properties > additional metadata into force button takes you to the XMP library, so as much metadata is not encrypted any other software that can manipulate XMP will see it too (like Adobe Bridge, and there is a whole list of things here). In Acrobat X, if you want to see (but not change) the XMP tree, you can use Preflight (it's a bit messy but it will show you the data):
Open the preflight tools > Print Production Panel, then choose something out of the list of profiles or audits that isn't a fix (i.e. has no key symbol). All you want is to run something without making any changes, you are looking for in the results window. Click on analyze, then on the result window, open the overview > Document information tree - all your metadata are there.
-
P7 USB controllers, 1414
HP P7 1414, the system crashed, and after reloading Win 7, do not work USB 3.0 ports. Device Manager indicates miss me the SM USB bus conctrollers! USB 2.0 ports are working fine.
Device PCI AMD Hudson - 3 FCH - USB 3.0 xHCI controller
Hub & AMD USB 3.0 host controller root
Hardware ID:
PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03Driver for Windows 7 32-bit and 64-bit
File name: hmua01ww.exe
Size: 99 MB
Driver version: 1.0.0.66
http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/hmua01ww.exe
http://www.mediafire.com/download/3pscpd94591apog/hmua01ww.exe
MD5: 27005940DA3C575B6BF50506AE5AF60F
SHA-1: 7B16974DFA7E3C95EA7D7D955B94A55CE42970E1
SHA-256: 105E3BFEDD25C318274AE94A8A3E485FED3F0E73F6C4E39117D701E7757B1E5B -
Why my test application ends (disappear) during testing?
Hello
I wrote the application of test using CVI2009 under WinXP. The application works fine but when I repeat test, the application closes around the 9th or 10th repetition. When I reload and run the application he'd leave again around the 9th or 10th repetition. I have not the slightest idea of what is going on. I joined A80428Error.bmp and A80428ErrorLog.bmp error logs. Could someone please help?
Than you.
Robert Mensah
If you see Help "Input queue size" Control Panel on OpenComConfig multi-function, you will see an explanation on this subject.
Serial driver Microsoft dictates a minimum of 4 096 bytes to the input queue.
So even if you specify 512 you get 4096.
This is why you have more than 512 bytes in your queue for entry.
Hope this helps,
-
How to pin software camera assistant to start menu or the taskbar?
Original title: reinstall the software
Laptop crashed. Restart/reload deleted all the data, including the camera Assistant toolbar. It is an attempt to re - activate the camera. Download Camera Assistant Software for Gateway laptop and placed it in the office. How to enter in the start menu or the taskbar? HM
Hey, Montgomery,
Here's how you can pin the application to the Start Menu.
(a) right click on the exe of the program or the shortcut for the program.
(b) click on Pin to the Start Menu.
For more information, see:
Customize the start menu
http://Windows.Microsoft.com/en-us/Windows-Vista/customize-the-start-menuThis should be it.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Impossible to delete or move some files because of the property with Administrator removed after upgrade to vista
I tried to upgrade to Windows 7 & and pc crashed couldn't reload so went for new install this left an unknown error account.Hi all
I was having the same problems and this message is used to solve this problem
(1) the correct syntax for the activation of the Administrator's
NET user administrator / Active: Yes
Notice, there is no space after the slash
(2) that works, I logged as administrator.
I could just go in the folder, click on security, to change users, to remove the
(3) now, I did run in which inherit permissions errors, here's what I did to get around that
In the Security tab, select ADVANCED security features, find the user to EDIT the PERMISSIONS
Highlight all users, EDIT, all DENY options to checked, will APPLY, you receive a warning about using the DENY option, just OK, OK OK, return to the Security tab. NOW, come on in, user of the IDE and you should be able to remove this(4) another thing, make sure that the
is not owner on any of the folders. I've changed them all to someone else, but be careful, that could spoil you Hope this helps
Happy holidays from cold, wet PHX, who would have thunk it!
Lost_N_Arizona
-
My computer died so I need to know how to deactivate and reactivate my Adobe Acrobat 9 Pro?
So I have the original disc, but I think I need something more because I wasn't able to disable the program, when my computer crashed. I reloaded Windows from scratch and lose my files.
Hi thewmejr,
If please see Activation & deactivation help - if you need to disable Acrobat, but is no longer to have access to the computer that it has been activated, you will need to contact customer service for assistance.
Best,
Sara
Maybe you are looking for
-
Firefox does not display properly and is very laggy on sites with Protection DDoS CloudFlare
Since 35.0 and especially I get odd behavior on sites with CloudFlare DDoS protection. When I open the site in a new window, it really takes a lot of time and sometimes nothing appears and gives me a blank page. and now that she just started saying '
-
Satellite 2400-103 shows no BIOS or Boot Menu
I want to save this beauty that I found but I have a problem: after entering the Bios password Windows XP starts immediately, no JOB nothing. I tried the method that theoretically works: "ESC" key while Toshibe logo appears and then 'F1' at the promp
-
Thread and class with no thread
Hi everyone , hope you can help me with this... I have two classes, extends a Thread and the other extends screen. My problem is that the screen needs all the information that the thread has had, but I do not know how to make the screen show upward w
-
How to remove the .dat files
Hi all I recently updated my Surface Pro and I noticed that during the update, there is a Windows.Old folder that contain data from before the update. However, when I tried to remove this folder as the update seems to be normal, I am unable to remove
-
Unable to understand the result of the loop
Hi allI got the tracking code:CodeSet serveroutput ONDECLARETYPE IS VARRAY months_array (12) STRING (3 CHAR);MONTHS months_array: = months_array ('Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec');BEGIN< < list_month