Laptop HP 2000-120CA crashed shortly after reloading software factory

Similar Questions

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• laptop HP 2000: drive hard short dst failed

  Can someone help me understand what that means? I have a laptop HP 2000. Windows 8.

  Test drive: 1
  SMART hard drive check: PAST
  Hard drive short DST: FAILURE

  Failure ID: 64M7SX-6GT7Q1-XD6X1F-60RS03
  Product ID: C2M21UA #ABA

  Hard drive 1

  DST: no way, the hard drive has failed and needs to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• VM crashes shortly after a VMotion

  I have a battery of ESX servers with 4 Proliant DL360G5 Dual Quad-core servers (all identical) with 32 GB of RAM. Data store is on a HP EVA and I have 30 VM is running currently. I just noticed that when I VMotion a machine from one host to another, everything seems fine after the VMotion. I can connect (or if I was already connected, I'm always connected. However, after about 2 minutes, the machine that I transferred crash and restart. The only indication of the problemis that there is a message in the virtual machine Windows event log, indicating that the last unexpected system stop. If I am connected to the Console, it becomes black just and restarts. Essentially, it's like I had reset the virtual machine.

  Also has anyone seen this type of behavior?

  I'm under ESX 3.5 Update 3 (build 123630)

  Virtual Center is 2.5 build 119598

  Thank you

  This is a bug that was introduced in ESx 3.5 Update 3. It occurs only if you have activated Virtual Machine monitoring. What is happening is that the heartbeat is screwed up during a VMotion, so after 2 minutes the VM monitoring think that the virtual machine is broken, so HA kicks in and starts the application on another server. We had the same problem just after "redevelopment" update 3. After VMM it never happened again.

  I was hoping that the new patches released today could solve the problem, but according to the changelogs this bug is not addressed. Incredible. I would have thought after the update 2 timebomb fiasco that quality control and tests would be important and that is something did pass through, a difficulty would come relatively shortly after.

• HP Pavilion 17 PC laptop: Hp Lap top - freezes wireless and computer crashes shortly after

  I have HP Pvillion Notebook 17 - screen touch, bought in 2015 - a laptop computer for years.

  In the past month the sign wireless turns off (and I'm offline) and the mouse freezes and laptop freezes forcing me to close the power button.  Then on switching on, the laptop is fine with wireless - however, it does not last long and this happens at least several times during the day.

  Can you please help me - why my wireless goes out suddenly, and also the mice and keyboards, including computer freezes?  Any solution?

  Help, please. Thank you.

  Malar

  Hi @Malar_Mano,

  Thanks for the quick response.

  Please check in your device manager and update the wireless network card driver, if it has a newer version on the link below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-17-F000-notebook-PC-series/6936220/model/7155684

  Also please update the chipset driver.

  This document can help too: HP PC - troubleshooting wireless network and Internet (Windows 10)

• computer keep crashing shortly after switch on

  I can't be sure, but this happened after I updated windows service Pack 3

  Source: System error

  Description: error code 000000f4, parameter1 00000003, parameter 2 82178528, parameter3 8217869c, parameter4 80604548

  First of all, you should have a backup strategy. After you get this all straightened out, start backing up regularly. Here are a few suggestions for this:
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  The data can be recovered even if you do not have Windows. I'll give you the methods at the end of this post. I will also say that if you're uncomfortable or unable to do anything, I suggest to solve this problem, you need to take the computer to a local professional with a good reputation. Do not use a type of BigComputerStore/GeekSquad of the place. If you do this, be sure to say the professional to recover your data first.

  That said, I do not understand why someone who says that it is not gifted in computer science would have downloaded/installed this particular program. What problems were you that you thought that the experience could be resolved with this program?

  To resolve the immediate problem to get into Windows, you can get in Mode safe? To do this, repeatedly press the F8 key as the computer starts. That you will get to the diagnostic menu where you can choose Safe Mode. If you * can * get in Mode safe, try to set the computer to do a clean boot, and then try to boot into normal mode. The program you have installed may have also installed drivers low level starting with XP. Or it may have been other problems with the computer that you have not mentioned.

  Clean boot in Windows XP -http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advancedhttp://support.microsoft.com/kb/316434

  Let me know if you can get in Mode safe and what happens when you perform the clean boot.

  To recover data without being able to get into Windows, the easiest way is topull the drive and put it in a box of USB drive or use a USB car adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive.

  MS - MVP - Elephant Boy computers - don't panic!

• InDesign CS6 crashed shortly after opening a file

  Hello

  I searched the web to answer this but have had no luck. I recently opened a file that was working fine but suddenly does not open. I opened the file INDD CS5 and decided to try the CS6 to see if it would work.

  Here's my process.

  1. I open the file
     
  2. 7 seconds after the file opens, I get the message "Adobe InDesign CS6 has stopped working"
     

  I am sure that it is a matter of link of image or a police problem, but he invites not to replace fonts or find the images.

  Any suggestions?

  
  

  Peter

  We tried to open on the other two systems. Both open the file and Indesign falls down after about 7-8 seconds. Do you have a recommendation for a font manager that might help my situation?

• Firefox crashes even after a clean install of Windows

  Hey!

  My Firefox keeps crashing. It starts up ok, but still crashes shortly after. I do not see a pattern in accidents, it seems random. Strange thing is that I had this problem before with Win7 and now he persists after installation clean full of Win10. The two hard drives formatted, no old files or anything left... It crashes in safe mode, too. On Win7, I could get locked out of the browser. Sometimes he would start crashing whenever I started the browser. A reboot has allowed me to once again successfully launch Firefox, but it would soon break without worrying. He crashed on the clean install of Firefox and crashed after that I installed Adobe Flash.

  The crash began perhaps a few days previously, I think not that a lot of it initially. Now, however, it drives me nuts; It is basically impossible to navigate. Firefox browser my go-to for years and I would rather go to another.

  Here are a few crash reports: 4b05df7c-24d3-49e3-a13f-c9d57aca3cf0 bp-775561fc-4d6c-48a5-8c6b-e3af42161108 43d377a7-ea92-4c37-b717-84a562cd2d36 bp-09b21c04-8640-44ed-a261-a98f12161108 bp-9726e46d-d041-4fba-b905-f92682161108 fb6d8a28-79c6-4cab-b4c1-096778ca49e8

  You will appreciate all help to the problem.

  Seems that the problem is solved by itself. Not a single accident today. I don't have any idea of that which could have fixed, or what caused it in the first place. Curious, but no matter, I'm a happy camper now. I wish all support forums it was effective.

• My laptop screen is blackened or shaded, but to work. Something is darkening up shortly after departure. What should I do?

  My laptop screen is blackened or shaded, but to work. Something is darkening up shortly after departure. What should I do?

  The backlight that run on the screen is burned.  This isn't something that you can fix because it involves disassembly of the computer and parts are not generally available.  It's a hardware problem.  You need to take your computer to a repair store to fix this problem.  If the computer is in power saving mode, that there is no display at all, shines a flashlight on it would reveal a slightly glossy, empty, black screen.

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• HP laptop 2b29WM 2000 startup issues 8

  my laptop 2b29WM 2000 motorized on charge for always leave HP screen and gives the blue screen "A PROBLEM OCCURRED' error Oxc00002e3 then go to auto repair, which then leads to a black screen. All I see is my cursor on the screen. Windows or my password screen appears. I did the Diagnostics by pressing ESC and gave me Hard Drive DST short check failed. Failure, ID 64KQ1W - 6 H MFGK1F-60QL03 DRIVE HARD 1 - 6784 - I contacted HP and they said I might have a virus, and they can help with restocking fees to zero/restoreing computer at an earlier date. I don't have a recovery HP or USB disk. I really need the computer for my children and cannot afford to pay. Someone at - it solutions as if get a RECOVERY of HP USB download or knows how to solve my problem. WINDOWS 8 THANK YOU

  LosGlen wrote:
  so I have to download all the drivers? and windows? If I do not replace the hard drive

  If you do not plan to buy a recovery media (which contains everything a package including all the programs that came provided when you purchased the laptop),

  You can try an INSTALLATION CLEAN of Windows 8 x 64 OEM (Original Equipment Manufacturer)-

  Download, save & burn/mount the following file OEM ISO of Win 8 x 64 on DVD / or copy ISO to a USB vacuum using the ISO tool like burning Imgburn (ISO OEM download link has a daily download limit, have to try several times, also I don't know if it's even downloadable).

  Windows 8 x 64 ISO

  Tool ISO Mount/burn - Imgburn (choose the smaller 4 x or 8 x write speed to burn ISO on DVD)

  Additional drivers can be downloaded from the pilot site, I have mentioned in my previous post, save on an another USB & installed from it after the installation of Windows.

  NOTE: A CLEAN WINDOWS INSTALLATION WILL BE DEVOID OF ALL HP & THIRD PARTY PROGRAMS/SOFTWARE THAT WAS DELIVERED WITH YOUR LAPTOP WHEN YOU BOUGHT, BUT ALL THE NECESSARY OS PROGRAMS DRIVERS WILL BE INSTALLED FOR THE PROPER FUNCTIONING OF THE OPERATING SYSTEM. ADDITIONAL FOR YOUR MODEL DRIVERS MUST BE INSTALLED ON THE SITE OF THE PRODUCT.

  Windows 8 would be automatically activated during installation usually - as the product activation key is integrated into the chip for the BIOS of your motherboard for laptop.

  Concerning

  Visruth

• Microsoft Comfort Curve Keyboard keys malfunction after reload of software Windows 7 64 bit.

  Microsoft Comfort Curve Keyboard 4000 and 2000 models both have swapped the functions to shift 2, shift of single quotation marks, backslash shift and shift 3.  Each keyboard seems to have the same problem.  Occurred after having to reload the software 64-bit Windows 7.  RELOADED software for keyboards and still does not help. Had to reload windows and keyboard software after that caused windows crash errors.

  Hi Jon,

   
  Please contact Microsoft Community.
   
  I suggest you to consult the article below and check if it helps.
   
  Troubleshoot wired keyboards that do not or only the erroneous characters category;
  http://support.Microsoft.com/kb/258826
   
  Note: If the problem persists, I suggest you to consult the article below.
   
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01
   
  Answer us with results, so we can help you further.

• Problems of replacement of Windows 8 with Windows 7 on a laptop HP 2000-bf69WM

  I just bought a laptop HP 2000 - bf69WM during the Black Friday at Wal-Mart last night sale. This morning, I pulled and he went right to the trying to repair right out of the box. I managed to get him to stop and I went to system restore and managed to get it started. Needless to say, I'm not at all impressed with Windows 8. I've heard of all the problems users have had with it. I tried to install Windows 7 on it, but it will not be installed. The BIOS shows Windows 8 as the operating system. How can I dump this CRAP of Windows 8 and install Windows 7 on this computer. It is not a bad machine, I wouldn't get rid of him during another screw up Microsoft.

  try to remove the disc of windows 7 on reboot and put it back in after the windows 7 logo too good luck finding the network always in trouble with drivers.

• Why my iPhoto has started 'quit unexpectely' shortly after I click on the info button to access information on a particular photo?

  Why my iPhoto has started "leaving non-response" shortly after I click on the "info" button in order to access information about a particular photo?  It happens with all the photos in my iPhoto.

  I assume you are using v9.4.3 on 10.8.5

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

• Laptop HP 2000: user password screen forgot lock

  I forgot the user password screen on laptop from HP running windows 2000 8, just after the adjustment for the first time.  There is no option to log in as administrator (only the personal user appears).  There is no personal data / files on the PC.  Need instructions step by step to retrieve or reset the password.  OR another option would be to default factory reset and start again, but once again need directions to do so.

  Hi there @cgoslin,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you forgot the password to connect to your laptop HP 2000.

  Please follow all the instructions in the document what to do when you forgot your password to login (Windows 8) .

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!