Laptop HP 15 (r063tu): would replace drive HARD regular with SSD boost speed & performance significantly on my HP 15 laptop?

Similar Questions

• Replace drive HARD Y500 with SSD - 16 GB mSATA SSD disk cache is removed?

  Hello

  I have a Y500 IdeaPad and recently bought a 240 GB SSD 2.5 ".

  I want to replace the 1 to 2.5 "with the SSD 2.5 HARD drive" for best performance.

  Now that I have a drive high speed there is no advantage in order to maintain the 16 GB mSATA SSD disk cache?

  I need to remove the cache of 16 GB mSATA SSD drive after the instalation of the 240GB SSD 2.5 "?

  Thank you.

  Now that I have a drive high speed there is no advantage in order to maintain the 16 GB mSATA SSD disk cache?

  Answer: IMO, cache ssd is no longer since you already have an equal or faster ssd drive.

  I need to remove the cache of 16 GB mSATA SSD drive after the instalation of the 240GB SSD 2.5 "?

  Answer: You can deleted or you can format and use it as a data disc.

• Replace drive hard ze4900 with disk 5400 RPM?

  I am trying to replace the HARD drive on a ze4904US Pavilion Notebook, Phoenix BIOS F.15...  The original drive is a 40 GB 4200 RPM ATA drive.  I found a 5400 RPM 40 GB ATA HDD, rider that he is a slave, installed, but it is not editing as C:.  This laptop does support the 5400 RPM drives?  Should he be attached as master or slave?

  I can boot from the CD of the OS, which displays the C:\ > and complains that the path is bad.  Try to install Windows XP immediately fails with an IO error.

  If I start the recovery console, WFP, I can see the partition (\device\harddisk0\partition1), but it is not a drive letter assigned.

  If I drop in the BIOS, run the HARD drive test, it displays 'Diagnostics not supported' and 'Device No. IDE'

  The drive 5400 RPM came a Win Vista laptop and was initially cavalier as master.  If I leave it set as master boot, a CD of SystemSuite, he gripes 2-4 e/s, (ignored) errors, takes about 10 minutes to pass the time-outs of the IO error, but finally sees the old partition on Win Vista.  So I know that the equipment is in place OK.  Trying to do a trivial co-operation (volume set name) fails.

  I would like to reformat the drive and start with a file system clean, but format C:/FS: NTFS, fails with "drive not valid or not drive."

  I think I can build a bootable CD to update to e.16, the HP BIOS later.  That would support the drive 5400 RPM?

  Larry
  
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

  Fixed! Found a Hitachi Travelstar 60 GB HDD, 7200 RPM, IDE interface, was attached to CSEL, inserted in the HP Pavilion ze4904us, put under tension and it worked like a charm.  The car was seen by the BIOS/advanced/HDD/Diag and it test very well, at least through quick check of phase 1, then I released on bail.  Under BIOS/Palestinian territories occupied? / BootOrder the drive is detected correctly (displays the correct model ID).  Installed WinXP and on my way.

  I used the HP WinXP SP2 original installation CD.  Does not all of the HW (WLAN, VGA), video drivers.  Subsequently found most of these on the HP/Support/downloads page.  Lack yet the program Program Files/utility/One-Touch to change the definition of the buttons easy One-Touch access at the top of the keyboard, but the work of bindings by default OK.

• Replace drive HARD system with Samsung EVO SSD 1 TB of HP ENVY 17 - j005tx laptop computer

  Hi all

  Wanting just a few tips on how to migrate and replace the system drive without having to reinstall everything again.

  The Migration of Samsung tool work?  When I check my HDD in the laptop there 5 partitions...

  The HARD drive, I would like to replace a the following Partitions:

  400 MB (Recover Parition)

  260MO (EFI Partition)

  904 GB (drive c :) - NTFS)

  350 MB (recover Partition)

  25.5 GB (drive D: Recover - NTFS drive)

  According to the Samsung User Guide data Migration tool, he mentions the following:

  http://www.Samsung.com/us/support/owners/product/MZ-7TE1T0BW

  6 recovery OEM partitions, at the plant by computer makers, cannot be replicated. However, if the PC is manufactured by Samsung and SRS (Samsung Recovery Solution) 5 or 6 is installed, the recovery partition is automatically cloned. (Not supported in versions prior to SRS 5)

  How can I migrate all recovery OEM as well as partitions C: and D: partitions?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  If you burn the recovery DVD, you don't need the recovery partition... they hold the same data. I try the clone on the new drive and see if it works. If it isn't then you still have the original drive and nothing has been lost. Reported problems with the migration of Samsung software. Personally, I use Acronis True Image Home for cloning, and it is not.

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• replace drive hard kaput?

  When my computer was unable to reboot and chkdsk and the following disk repair utility would not work, I paid to have the laptop looked at by a pro. It turns out that the HARD drive has failed. So the question is: can I replace the drive hard when all I have to work with are the recovery disks that I made when the computer is new? (Door NV57H) The OEM of Windows 7 will be on these discs, which allows installation pretty simple hard drive and recovery? Can I go with a SSD? As a smart enough DYIer with some knowledge of computers, but limited reparations experience can handle such a task?

  SSD become cheaper these days for sure

  They may fail, as any player, as you've seen personally.

  System images are the best way to retrieve install lost hdd or ssd, but they must be on other devices / hdd before they are viable

  But Yes if the recovery cd creation took place all you have to do is install a new drive and the boot CD #1

  Follow the prompts.

• replace drive hard dv6

  I need to replace the hard drive of my 3225 dv6 dx, but the hp spare part is too expensive (hp # $ 603676-001-219). Y at - it another option that works with this model, but cost much less? (preferably under $100) I would appreciate any suggestions you may offer. If possible, a few options would be great, in the case where one or more is not in stock. Thank you!

  Happy that power will help you

  Thank you

  PLEASE CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.

• S1620CDS: replace drive HARD 4 GB by a 20 GB

  Hi all

  How to replace the HARD drive? I heard that it's located below the keyboard. HOW can I remove the keyboard, then?
  Thank you year hlp.

  [email protected]

  Hello

  You are right. The HARD drive is replaced under the keyboard.

  If you want to remove the keyboard to on this way:
  1 remove the cover of the band. The status indicator panel aims to snap
  in place. Please do not use excessive force to remove or replace. You can't lose this part of both sides.
  2. when the cover of the band is removed, remove the four screws now the keyboard in place
  3 lift the keyboard

  If I remember just the HARD drive fixed with two screws.

  Good luck!

• replace drive hard macbook pro 2008

  Where could I find an instructable how to replace the hard drive in my macbook pro 13 "mid-2008 (unibody)? Or should I bring to an authorized Apple service center here in Malaysia?

  Here is a guide of ifixit.com. I'm not sure of the exact model of your computer, but this site is a good starting point. They are deep in their step by step guides.

  https://www.iFixit.com/Guide/MacBook+unibody+model+A1342+hard+drive+replacement/ 1670

• Replace drive hard hp pavilion dm3 after failure of hard drive test.

  All,

  I have a HP Pavilion Dm3. Windows 8 Beta. My error messages included: drive hard Test failed. Hard disk 1 (303) fast. Hard drive 1 full (395). Most recent upload has itunes. From what I see I need to replace my hard drive.

  My question is this; is there a manual or a guide on how to, 1. physically, replace the hard drive and 2. record information that may exist on my hard drive crashed? Thank you in advance for your help!

  Hello:

  There are many models of dm3.

  I pulled a repair of the dm3-2000 series. I hope that this layout is the same.

  Read Chapter 4 of the procedure on the removal and replacement of the hard disk. Do not throw the old hard drive.

  You will need to the caddy, the connector and screw to transfer to the new.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01893277/c01893277.PDF

  Before you remove the hard drive, you can see if you can copy your files on a USB portable hard drive by downloading, burn it to a CD (using the ISO burning method) and make a the Kapersky rescue CD bootable CD. This will allow you to see the folders on your C:\ drive using the method of the graphical interface of the program execution.

  Then you can copy and paste your files on your portable hard drive.

  If the rescue CD can not see your hard drive, there's probably nothing you can do anything to the drive for recovery.

  http://support.Kaspersky.com/FAQ/?QID=208282173

  Paul

• How do I synce my family photo'sfile on my drive hard exeternal with wihe even name on a usb flashdisc

  How do I synce my family photo'sfile on my hard drive of exeternal with a file of the same name on a usb flashdisc

  Hi AllanGrace,

  -You try to use any sync software to synchronize the file?

  Trying to transfer the file manually using the copy / paste operation.

  You can also check:

  Step-by-step guide to migrating files and settings

• Replacement X 220 HDD with SSD?

  Hi people,

  1 can you replace the built in hard drive on a X 220 with a SSD?

  2. If possible, where can I find instructions on how to do it?

  3. If possible, should be a tiny philips screwdriver - where can we got such a tool?

  TIA,

  SD

  1 Yes
  2 x 220 guide on the Lenovo site. No problem to install the new 7 mm or 9 mm ssd
  3. Yes, you will need a small scredriver

  I replaced the standard hard drive with ssd Intel 320 Series. The only thing you will need is tool of s/w for transfer system and the date on the new SSD. Another tool is to tweak Windows for the use of SSDS. Nothing tool you will need to charge Windows 7 install direct on the ssd.

• Replace drive HARD laptop computer HP ENVY 15 t-j000 Quad Edition SSD

  I would buy a HP ENVY 15 t-j000 Quad Edition Notebook PC and HP v300a 120 GB SATA Solid State Drive with Upgrade Kit.

  Now, the SSD has a thickness of 7mm.

  My question is if I can replace the HDD with that SSD? The thickness is the HARD drive Bay in the laptop.

  If it is greater than 7mm from the DSS moves inside?

  Thank you

  Hello

  The old HDD on your machine is a little thicker, but at least 4 screws I do not think that new SSD will circulate in the case. I have actually put new SSD in one of my laptop (not HP) and no problem, BUT I don't move this laptop. If so, blue tac can help.

  Kind regards.

• Replace drive HARD laptop HP bf69WM 2000

  Hello

  I recently acquired the dead laptop HP 2000 model bf69WM with a hard drive (error in the log of BIOS: 03F0). I studied a replacement and found gaps in the Service Guide. He says that the supported drive has an RPM of 5400 in section 7200 in another. The drive 5400 RPM is 9.5 mm. The 7200 disk is 7mm. The HARD death drive is a Toshiba 320 GB model MQ01ABD032.

  If I replace with another Toshiba 5400 RPM, 9.5 mm drive all should be well, (I assume apples to apples). If I replace it with the 7200 RPM drive 7 mm: has) the highest ROTATION speed will cause more heat and perhaps premature? (b) will it be should I buy another drive Assembly to support the drive of 7 mm?

  I'm looking to a Western Digital drive. In addition, this particular model does not support larger capacity drives or SSD?

  Thanks in advance for any information.

  Is a license for your laptop to Windows 7 or Windows 8? Can't help much with Windows 8, but if you have Windows 7 Home Premium 64 bit here is a link to an .iso that is a legal copy of the operating system that you are naked.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO

  This will work only if your laptop came with Windows 7 installed. If it is Windows 8, you will have recovery media order of HP.

• replace drive HARD w / Win 8 with the new drive HARD w/Win 7

  Just bought a laptop HP Pavilion 17-e067cl of COSTCO. I want to remove the factory installed HDD with Win 8 and the factory load on it and replace it with a new HARD drive and load Win 7 on it

  Is there something in the BIOS that would prevent me from doing this? If so, the parameters can be modded to accomplish my plan?

  I intend to use a same naked drive and load Win 7 on it.

  Will be a new copy, the retail sales of Windows 7 Home Premium SP1 64 bit Full System Builder License and media, 020250 GFC (1 machine, 1 license) be installed the correct version of the operating system. I want Home Prem

  My intention is to keep the original HDD with Win 8 warranty questions arise in the future or will be the wedding of the motherboard is a problem?

  Details for laptop:

  Prod #: F9L64UA #ABA

  HARD drive: ST750LM0 22 HN-M750MBB SATA (Samsung)

  BIOS: F.22

  Sys Board: 1984 01.13

  Memory: 8GB Samsung 1600 MHz SODIMM

  CPU: AMD A8 - 5550 M APU with graphics Radeon (TM) HD

  WARNING: my last cert has been on Win XP, so I'm way behind the curve on 8 to win.

  Thanks in advance!

  hardwired56,

  Please indicate if you have some problems to get into the BIOS or open Bay hard drive of the computer...

  For hard removal and replacement please see page 49 of the HP Pavilion 17 TouchSmart Notebook PC HP Pavilion 17 Notebook PC Maintenance and Service of Guide.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation