Replace e1000 vmxnet3

I installed on vmware workstation to esxi, I want to change the change to vmxnet3 e1000 NICs

someone has an idea?

pls I want to change to ESXI not for the virtual machine.

hussein_mohson wrote:

I installed on vmware workstation to esxi, I want to change the change to vmxnet3 e1000 NICs

someone has an idea?

pls I want to change to ESXI not for the virtual machine.

Edit the virtual machine configuration file and Add (or change) these settings:

ethernet0.virtualDev = vmxnet3

Ethernet1.virtualDev = vmxnet3

ethernet2.virtualDev = vmxnet3

ethernet3.virtualDev = vmxnet3

...

Tags: VMware

Similar Questions

machine 2 crashed after update network adapter type E1000 VMXNET3

What is the reason why the machine is not booting with OS after update of E1000 VMXNET3 network adapter,
update is done via scripts

in this case, there is a solution that allows you

1 remove the adapter NETWORK adapter or remove the connection

2. adding another type of VMXNET3 adapter new

3. start Machine... If boot machine... Stop the machine

then. Remove the new card NETWORK adapter

and fix the old on or connect an old

hope it will work.

1 single device unable to access Internet from my WRT54g replaced e1000

I'm having a problem with 1 laptop as I installed my Cisco e1000. Here's my setup.

Cable modem-> BEFSR81 vs3-> E1000.

The BEFSR81 serves all my LAN wired connections and using DHCP. The E1000 is connected to a LAN to LAN connection (such as Internet to connect to the LAN does not work for all devices).

The E1000 has disabled DHCP (I turned it off to try to solve this problem).

All wireless devices get a good lease DHCP the BEFSR81. I am actually posting this from my laptop to work using a wireless connection between the e1000.

Work machine connection information:

Ethernet card 2 wireless network connection:

The connection-specific DNS suffix. : nc.rr.com
... Description: Intel Centrino Advanced-N 6200
AGN
Physical address.... : 00-23-14-D0-F1-28
DHCP active...: Yes
Autoconfiguration enabled...: Yes
IP address...: 192.168.1.104
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DNS servers...: 209.18.47.61
209.18.47.62
Lease obtained...: Friday, March 4, 2011 08:41:32
End of the lease...: Saturday, March 5, 2011 08:41:32

Non-working machine gets the same information, sauf.107 as the final byte in the IP. However, it may not:

(1) ping to gateway (router wired), partially once outside, partially inaccessible Destination address.

(2) ping any IP on wireless local area network - get the unavailable destination host.

I deleted and then recreated the network connection several times - the Setup is exactly the same Windows is concerned on both devices.

Until I get really pissed on a smash, the new router with non-working laptop wireless, anyone have any suggestions? Thanks in advance for reading/tent to help.

Have solved it after talking with support from Cisco. Apparently, the driver supplied with Windows Vista Atheros 5007 wireless card had problem with WPA2 encryption. I updated the driver from the site Web of the manufacturer of the PC and boom, I'm back online. My previous router was WPA, so I didn't know it was a problem.

Vmxnet3 in models?

Hello
We use again the E1000 driver for our Windows 2008 Server VM. We intend to change our master models and put the driver VMXNET3 inside. This will make each new virtual machine have the new network card.
What do you guys use? I read he had problems with VMXNET3 as not being only unable to use FT... well I can always use VMXNET2 which seems also more recent.
Guys tune the pilot, as to enable RSS in there?
To upgrade an existing virtual machine with driver E1000. Is the process:
-stop VM
-remove the E1000 NIC
-Add VMXNET NIC
-Start the virtual machine and reconfigure the IP address?
There is no quick path to upgrade?
TIA.

We use VMXNET3 on all possible virtual machines, it has significant performance win on E1000, we integrated it into the templates. Like the previous poster, we do not set the VMXNET3, we let them default and I recommend you do the same thing.

My recommendation for the E1000 VMXNET3 process swap is
1. Set E1000 IP dynamic
2. Shutdown VM
3. Remove the E1000 NIC
4. Add VMXNET3 NIC
5. Start the virtual machine and reconfigure the IP address
6. Open cmd.exe and run
"set devmgr_show_nonpresent_devices = 1".
"devmgmt.msc".

In device management
1. Select "Show hidden devices" in the Device Manager View menu
2. Uninstall the device removed e1000
I agree it is a bit heavy, but there has not, to my knowledge at least any more easy way.

http://v-reality.info

GROUP at the same time, almost every day... I am gettting pirate? NOOBIE needs help! Thank you!

In the last few days my Esxi server started to receive the GROUP at about 05:00 almost every day (thur, sat, Sun)... I have attached the screenshot of the GROUP... I tried to join vmkernal-zdump, but it is too big. I added the lines below that I found when searching for error or failed and ask yourself if I get hacked because the IP listed is one I'm not familiar with.
Error reading pending connection: Connection closed by remote host, probably due to timeout
(2016 04-12 T 00: 34:40.829Z cpu4:8770) MigrateNet:
NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124038cc000, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 06: 53:58.264Z cpu11:6020559) ScsiDeviceIO: 2331: Cmd (0x4124038cc000) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f2868f has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 06: 53:58.264Z cpu11:6020559) ScsiDeviceIO: 2331: Cmd (0x4124038cc000) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f28690 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 06: 53:58.264Z cpu11:6020559) ScsiDeviceIO: 2331: Cmd (0x4124038cc000) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f28691 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 07: 23:58.315Z cpu8:6020553) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124003b9100, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 07: 23:58.315Z cpu8:6020553) ScsiDeviceIO: 2331: Cmd (0x4124003b9100) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f2b7ca has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 07: 23:58.315Z cpu8:6020553) ScsiDeviceIO: 2331: Cmd (0x4124003b9100) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f2b7cb has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 07: 23:58.315Z cpu8:6020553) ScsiDeviceIO: 2331: Cmd (0x4124003b9100) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f2b7cc has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 07: 47:31.655Z cpu4:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 47:31.655Z cpu4:8770) MigrateNet: vm 8770:2147: dataSocket 0x410004569c30 receive buffer is size 562480
(2016 04-06 T 07: 47:42.655Z cpu4:8770) migrate: 208: read pending connection error: Connection closed by remote host, probably due to timeout
(2016 04-06 T 07: 47:42.756Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 47:42.756Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100046c8a40 receive buffer is size 562480
(2016 04-06 T 07: 47:47.704Z cpu2:8770) migrate: 208: read pending connection error: Connection closed by remote host, probably due to timeout
(2016 04-06 T 07: 47:47.806Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 47:47.806Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100047430b0 receive buffer is size 562480
(2016 04-06 T 07: 47:52.751Z cpu2:8770) migrate: 208: read pending connection error: Connection closed by remote host, probably due to timeout
(2016 04-06 T 07: 48:04.483Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:04.483Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x410004569c30 receive buffer is size 562480
(2016 04-06 T 07: 48:04.483Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:04.483Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100046c8a40 receive buffer is size 562480
(2016 04-06 T 07: 48:04.625Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:04.625Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100047430b0 receive buffer is size 562480
[(7 m 2016-04-06T07:48:05.051Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 1230262351. Waits for the message type INIT (0). [0 m
[(7 m 2016-04-06T07:48:05.153Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 1414745936. Waits for the message type INIT (0). [0 m
(2016 04-06 T 07: 48:05.494Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:05.494Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x410004569c30 receive buffer is size 562480
[(7 m 2016-04-06T07:48:05.494Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 16843542. Waits for the message type INIT (0). [0 m
(2016 04-06 T 07: 48:05.596Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:05.596Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100046c8a40 receive buffer is size 562480
[(7 m 2016-04-06T07:48:05.596Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 16843542. Waits for the message type INIT (0). [0 m
(2016 04-06 T 07: 48:05.913Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:05.913Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x410004569c30 receive buffer is size 562480
(2016 04-06 T 07: 48:05.915Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:05.915Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x4100046c8a40 receive buffer is size 562480
(2016 04-06 T 07: 48:05.968Z cpu2:8770) MigrateNet: vm 8770:2077: accepted connection from < 45.33.3.175 >
(2016 04-06 T 07: 48:05.968Z cpu2:8770) MigrateNet: vm 8770:2147: dataSocket 0x41000473f540 receive buffer is size 562480
[(7 m 2016-04-06T07:48:06.061Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 16843542. Waits for the message type INIT (0). [0 m
[(7 m 2016-04-06T07:48:06.164Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 16843542. Waits for the message type INIT (0). [0 m
[(7 m 2016-04-06T07:48:06.266Z cpu2:8770)] WARNING: Migrate: 262: invalid message for the new connection type: 1347375696. Waits for the message type INIT (0). [0 m
(2016 04-06 T 07: 48:25.595Z cpu2:8770) migrate: 208: read pending connection error: Connection closed by remote host, probably due to timeout
(2016 04-06 T 07: 53:58.353Z cpu0:8216) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x412403965d40, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 07: 53:58.353Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403965d40) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f2e904 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 07: 53:58.354Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403965d40) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f2e905 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 07: 53:58.354Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403965d40) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f2e906 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 08: 23:58.396Z cpu7:8199) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x41240335d5c0, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 08: 23:58.396Z cpu7:8199) ScsiDeviceIO: 2331: Cmd (0x41240335d5c0) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f31a3f has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.
(2016 04-06 T 08: 23:58.396Z cpu7:8199) ScsiDeviceIO: 2331: Cmd (0x41240335d5c0) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f31a40 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 08: 23:58.396Z cpu7:8199) ScsiDeviceIO: 2331: Cmd (0x41240335d5c0) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f31a41 didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 08: 53:58.437Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x41240039d680, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 08: 53:58.437Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x41240039d680) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f34b79 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.
(2016 04-06 T 08: 53:58.437Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x41240039d680) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f34b7a has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 08: 53:58.437Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x41240039d680) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f34b7b didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 09: 23:58.482Z cpu0:8216) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124003aa2c0, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 09: 23:58.482Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124003aa2c0) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f37cb1 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.
(2016 04-06 T 09: 23:58.482Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124003aa2c0) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f37cb2 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 09: 23:58.483Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124003aa2c0) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f37cb3 didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 09: 53:58.523Z cpu10:6020552) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x41240426b100, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 09: 53:58.523Z cpu10:6020552) ScsiDeviceIO: 2331: Cmd (0x41240426b100) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f3adec has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.
(2016 04-06 T 09: 53:58.523Z cpu10:6020552) ScsiDeviceIO: 2331: Cmd (0x41240426b100) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f3aded has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 09: 53:58.524Z cpu10:6020552) ScsiDeviceIO: 2331: Cmd (0x41240426b100) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f3adee didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 10: 23:58.575Z cpu9:8201) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0 x 412404343800, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 10: 23:58.575Z cpu9:8201) ScsiDeviceIO: 2331: Cmd (0 x 412404343800) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f3df27 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.
(2016 04-06 T 10: 23:58.575Z cpu9:8201) ScsiDeviceIO: 2331: Cmd(0x412404343800) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f3df28 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 10: 23:58.575Z cpu9:8201) ScsiDeviceIO: 2331: Cmd(0x412404343800) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f3df29 didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 10: 53:58.620Z cpu8:8200) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124039fd340, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 10: 53:58.620Z cpu8:8200) ScsiDeviceIO: 2331: Cmd (0x4124039fd340) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f41060 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 10: 53:58.620Z cpu8:8200) ScsiDeviceIO: 2331: Cmd (0x4124039fd340) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f41061 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 10: 53:58.620Z cpu8:8200) ScsiDeviceIO: 2331: Cmd (0x4124039fd340) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f41062 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 11: 23:58.669Z cpu0:8216) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124011b6900, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 11: 23:58.669Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124011b6900) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4419a has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 11: 23:58.669Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124011b6900) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4419b has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 11: 23:58.669Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x4124011b6900) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4419c has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 11: 53:58.721Z cpu4:8196) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x41240117a5c0, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 11: 53:58.721Z cpu4:8196) ScsiDeviceIO: 2331: Cmd (0x41240117a5c0) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f472d4 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 11: 53:58.721Z cpu4:8196) ScsiDeviceIO: 2331: Cmd (0x41240117a5c0) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f472d5 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 11: 53:58.721Z cpu4:8196) ScsiDeviceIO: 2331: Cmd (0x41240117a5c0) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f472d6 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 12: 23:58.764Z cpu0:8216) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x412404e93440, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 12: 23:58.764Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412404e93440) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4a40f has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 12: 23:58.764Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412404e93440) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4a410 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 12: 23:58.764Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412404e93440) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f4a411 didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 12: 53:58.807Z cpu5:8197) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0 x 412404336640, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 12: 53:58.807Z cpu5:8197) ScsiDeviceIO: 2331: Cmd (0 x 412404336640) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f4d549 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 12: 53:58.807Z cpu5:8197) ScsiDeviceIO: 2331: Cmd(0x412404336640) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f4d54a has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 12: 53:58.807Z cpu5:8197) ScsiDeviceIO: 2331: Cmd(0x412404336640) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f4d54b didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 13: 23:58.851Z cpu0:8216) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x412403a590c0, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 13: 23:58.851Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403a590c0) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f506ae has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 13: 23:58.851Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403a590c0) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f506af has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 13: 23:58.851Z cpu0:8216) ScsiDeviceIO: 2331: Cmd (0x412403a590c0) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f506b0 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 13: 53:58.893Z cpu2:8194) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x412403291cc0, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 13: 53:58.893Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x412403291cc0) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f537e9 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 13: 53:58.893Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x412403291cc0) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f537ea has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 13: 53:58.893Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x412403291cc0) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f537eb has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 14: 23:58.935Z cpu2:8194) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x4124003b3280, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 14: 23:58.935Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x4124003b3280) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5694e has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 14: 23:58.935Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x4124003b3280) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5694f has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 14: 23:58.935Z cpu2:8194) ScsiDeviceIO: 2331: Cmd (0x4124003b3280) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f56950 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 14: 53:59.206Z cpu7:9598) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x41240472b900, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 14: 53:59.206Z cpu7:9598) ScsiDeviceIO: 2331: Cmd (0x41240472b900) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f59a89 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 14: 53:59.218Z cpu7:9598) ScsiDeviceIO: 2331: Cmd (0x41240472b900) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f59a8a has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 14: 53:59.228Z cpu7:9598) ScsiDeviceIO: 2331: Cmd (0x41240472b900) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f59a8b has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 15: 23:59.270Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0x412401f31c00, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 15: 23:59.270Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x412401f31c00) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5cbc4 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 15: 23:59.270Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x412401f31c00) 0x4d, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5cbc5 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 15: 23:59.270Z cpu10:8202) ScsiDeviceIO: 2331: Cmd (0x412401f31c00) 0x1a, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5cbc6 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 24 0 x 0 x 0.
(2016 04-06 T 15: 53:59.607Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 85 (0 x 412403956400, 9487) to dev 'naa.600605b0064632501a0becd41125abe2' on the way 'vmhba1:C2:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO
(2016 04-06 T 15: 53:59.607Z cpu1:8193) ScsiDeviceIO: 2331: Cmd (0 x 412403956400) 0 x 85, CmdSN 9487 to dev 'naa.600605b0064632501a0becd41125abe2' world 0x8f5fd06 has no sense H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.
(2016 04-06 T 15: 53:59.653Z cpu1:8193) ScsiDeviceIO: 2331: Cmd(0x412403956400) 0x4d, CmdSN worldwide 9487 to dev "naa.600605b0064632501a0becd41125abe2" 0x8f5fd07 has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.
(2016 04-06 T 15: 53:59.683Z cpu1:8193) ScsiDeviceIO: 2331: Cmd(0x412403956400) 0x1a, CmdSN worldwide 9487 to dev 'naa.600605b0064632501a0becd41125abe2' 0x8f5fd08 didn't H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 5 0 24 x 0 x 0.
(2016 04-06 T 16: 23:59.722Z cpu4:6020549) NMP: nmp_ThrottleLogForDevice:2319: 0 x 85 (0 x 4124003 cmd
THANKS for any help you can give me!

Have you identified virtual machines with virtual network E1000e and replaced by VMXNET3 as described in the following KB: KB VMware: VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx

ESXi 5.5 craching every time that a specific server is running

Turn Dell 710, running 5.5 from a few days ago. He had been running 5.0 for a time before that. I have three VM, two are 08 R2 and one is a 12 R2. I've implemented a new is 12 R2 and will replace one of the VM 08. When I start the new virtual machine, it can operate for 5 minutes, he can walk for an hour, but it seems that when I try to copy all data from the old vm on the same host to the news that it will happen in a minute or two:
Can someone me idea in what I want here?

Looks like you are facing this problem: VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx (2059053)

Find the virtual machine with virtual network E1000 card and replace with VMXNET3.

guestScriptManager error: "guest authentication that is used doesn't have sufficient permissions to perform this operation.

Hello
I tried several days create a workflow to automatically remove the E1000 adapters on a virtual machine and its replacement by Vmxnet3 while maintaining the configuration of the network adapters.
Everything works fine with Linux VM (as the configuration is automatically preserved) but I have an error on the virtual Windows computer where I have to run a Powershell script (tried with batch also script) with guestScriptManager package.
Every script I try to run on a Windows 2008R2 VM does not reach the same step: create a temporary file in the comments. Error: "guest authentication that is used doesn't have sufficient permissions to perform this operation (workflow: create a temporary file in the task (item1) invited / Scriptable #8)"
Strangely, I am able to run a script, one or two times to just after a VM deployment and then I'm stuck with this error.
I tried with the local and domain administrator with no luck. I have no other description or log on to the error...
Any help would be appreciated
Thank you

For those who are wondering, I just updated my 5.1 ESXi Update 2 and the problem is solved.

Thanks to this thread: https://communities.vmware.com/thread/403326

Lost random network in the 2012 Windows file server

Hello
As usual, I'll start by saying that it worked front
The problem has occurred Monday morning.
The file server in 2012 randomly loses network connection.
This can happen after 2 hours as after 30 minutes.
The file server also have the role of print server.
Le virtual Server with 8 GB of RAM et 3VCPU on ESXi 5.1
All others servers on the same switch does not work have This behavior.
Et the Cup did not last long between 1 et 3 minutes generally.
When I Look in newspapers Je have absolutely no Warning ou error and no event tonight Warning last happened yesterday and I have summer full of problems today deco.
FYI j’ai IPv6 activated as well as the domain controllers (2012 + forest and domain).
During the This rupture the net et DNS resolution is ok on computer.
I also tested by deleting the the virtual network adapter e1000 by replacing un vmxnet3.
Suite un VMware et Microsoft KB I also have permit RSS which was not the default value.
I also have reinstalled the VMware Tools.
I've seen on the net as possible resolutions by turning on the Server """side received scalling" network or " Checksum Offload" but I'd rather have a notice card before you act. "
TrendMicro Antivirus, FileZilla Server et Backup Exec Agent 2012 are installed on this server.
No other software.
I checked everywhere but then I do not understand all the where it can come.
Thank you in advance for your return because then I stuck serious.

Hello

Thank you for your response.

Finally I have not updated it is a network route in the linux server causing a file server IP IP spoofing.

(It's a bit complicated and not logical, but when I remove the wrong it works better).

I see on the net that VMXNET3 are better support aggregation and much more...

Hosts in Cluster randomly crash and reboot

We have 4 guests in a cluster and once from time to time they restart unexpectedly causing all restart. I looked at the newspapers and the only thing I can find is the following
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu0:33441) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu0:33441) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu0:33441) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu14:33429) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu14:33429) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
VMkernel.18:2015 - 08-27 T 10: 08:11.809Z cpu14:33429) WARNING: E1000: 4469: E1000VMKDevParseProtoHdrs failed.
The hosts are all dell poweredge R810 connected to a Dell's SAN network. Does anyone know what are these mistakes? ESXi 6.0

We changed the network adapters in E1000 VMXnet3 and that solved the problem. E1000 drivers are not good.

Network bridge in VMware Workstation 11 connection problems

I have bridged network connection problems in VMware Workstation 11. So far I have tried:

Re: Windows Pro/Ent 8.1 Overview invited - stop Windows Net Performance, away from work

Re: Flow very slow network-> Guest host, but no comments <-home

So far, none of the solutions worked. I turned off "Large Send Offload" on each adapter that I could find on the host and the guest. Nothing. Restore these settings in any combination with other out does not work either. I edited the .vmx file and replace by vmxnet3 occurrences, and that no longer works. So far nothing I've tried has worked. I disabled all firewall and antivirus. Still nothing. When I run Guest OS Windows Network Diagnostics, I get the "your modem broadband has connectivity problems." However, I know that this is not the case. I also used the "Virtual Network Editor" to force the bridge connection to select the correct network card (in my case, it's the Intel Centrino Wireless - N 1030 wireless card), but still no luck. Any help would be much appreciated.

Thank you
Dave

My Stats:

Host:
OS: Windows 7 x 64
Processor: Intel Core i7
Installed memory (RAM): 16.0 GB (15.9 GB usable)
Wireless adapter: Intel Centrino Wireless - N 1030
Router: Netgear AC1200 Smart Wifi router. Model: R6200v2 (default settings)

Comments:
OS: Windows 7 x 64

So I finally the solution look. BitDefender firewall was blocking all traffic on the connection Bridged in VMware Workstation. I have disabled the firewall completely Bitdefender and Bridged Networking worked perfectly. I'll probably create another topic more precisely around Bitdefender firewall configuration to allow traffic network through Bridged from VMware.

Nested with 2 management cards workstation + ESXi5.5 = not to ping requests

Hello community,
I recently stumbled upon a bug (?) strange:
I needed to install several 1331820 ESXi5.5 in my computer and noticed that the management interfaces are not to ping/accessible queries if more than one NETWORK adapter is used for the management network. As soon as I remove/disconnect ping NIC begins work and the server is accessible.
Have not tested multiple ESX versions yet but Workstation 10/09/11 suffers from this.
Yet several descriptions of this question, but not solutions. A suggested workaround has been upgrading manual driver interface NETWORK of E1000 vmxnet3 but nothing is in my case.
Someone has any idea how to solve this problem?

The cause was found to be using linked clones.

I reinstalled all my guests individually and separately, do not use any cloning and they work like a charm.

Change the type of vNIC

Hello!

Anyone who uses a workflow change vNIC a VM of E1000 VMXNET3 or vice versa? The MAC address must remain the same.

Thanks in advance!

Kind regards

Hi t.,.

Here's a js code that changes all network cards not VMXNET3 a VMXNET3 network card and also if a MAC address is manually set, it will define the same MAC address of the card VMXNET3. But inside the virtual machine, the custom of network settings are affected by this js. You may need to set the prompt in the settings of the network by hand.

You must build a scriptable job, put VirtualMachine like variable of type entry: VcVirtualMachine and copy/past the code inside.

var myNetworkCards = new Array() ;

for each ( var myDevice in VirtualMachine.config.hardware.device )
{
  if ( myDevice instanceof VcVirtualVmxnet
   || myDevice instanceof VcVirtualVmxnet2
   || myDevice instanceof VcVirtualE1000
   || myDevice instanceof VcVirtualPCNet32
   || myDevice instanceof VcVirtualEthernetCard )
  {
  myNetworkCards.push( myDevice );
  }
}

var myVirtualMachineConfigSpec = new VcVirtualMachineConfigSpec() ;
var myDeviceChanges = new Array() ;
var myVirtualDeviceConfigSpec = new VcVirtualDeviceConfigSpec() ;

for each ( var myNetworkCard in myNetworkCards )
{
  // Build an operation to remove the attached Network Card
  myVirtualDeviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.remove;
  myVirtualDeviceConfigSpec.device = myNetworkCard;

  myDeviceChanges.push( myVirtualDeviceConfigSpec );
  myVirtualDeviceConfigSpec = new VcVirtualDeviceConfigSpec() ;

  // Build an operation to add a new VMXNET3 Network Card
  myDistributedVirtualSwitchPortConnection = new VcDistributedVirtualSwitchPortConnection() ;
  myDistributedVirtualSwitchPortConnection.switchUuid = myNetworkCard.backing.port.switchUuid;
  myDistributedVirtualSwitchPortConnection.portgroupKey = myNetworkCard.backing.port.portgroupKey;

  myVirtualEthernetCardDistributedVirtualPortBackingInfo = new VcVirtualEthernetCardDistributedVirtualPortBackingInfo() ;
  myVirtualEthernetCardDistributedVirtualPortBackingInfo.port = myDistributedVirtualSwitchPortConnection;

  myVirtualDeviceConnectInfo = new VcVirtualDeviceConnectInfo() ;
  myVirtualDeviceConnectInfo.startConnected = true;
  myVirtualDeviceConnectInfo.allowGuestControl = false;
  myVirtualDeviceConnectInfo.connected = true;

  myNewDevice = new VcVirtualVmxnet3() ;
  myNewDevice.key = 0;
  myNewDevice.backing = myVirtualEthernetCardDistributedVirtualPortBackingInfo;
  myNewDevice.connectable = myVirtualDeviceConnectInfo;
  myNewDevice.unitNumber = 0;

  if ( myNetworkCard.addressType == "manual" )
  {
  myNewDevice.addressType = "Manual";
  myNewDevice.macAddress = myNetworkCard.macAddress;
  }
  else
  {
  myNewDevice.addressType = "Generated";
  }

  myVirtualDeviceConfigSpec.operation = VcVirtualDeviceConfigSpecOperation.add;
  myVirtualDeviceConfigSpec.device = myNewDevice;

  myDeviceChanges.push( myVirtualDeviceConfigSpec );
}

myVirtualMachineConfigSpec.deviceChange = myDeviceChanges;

try {
  myTask = VirtualMachine.reconfigVM_Task( myVirtualMachineConfigSpec );
} catch ( ex ) {
  System.warn( "Could not reconfigure VM. Error: " + ex );
}

Kind regards

Chris

Diagnosis purple 5.5 ESXi host screen: 14 PF of Exception in the world 335026

Hello
I am having several problems with my VMWare ESXi 5.5 server.
My server is a Dell PowerEdge T320 with RAID 1 (2 disc 1 to) contains 3 Virtual Machines (2 x Windows Server 2012 Standard and Windows SBS 2011).
Server:
Model: Dell PowerEdge T320
Processor: Intel Xeon 1.90 E5-2450 MHz CPU
Memory: 32 GB of memory
The host runs sometimes for several hours or 30 minutes to receive the purple diagnostic screen: PF 14 of Exception in the 335026 world.
I tried everything, I've updated the BIOS, iDRAC, BIOS configured as shown in the technical and the problem persists.
The server has 1 month and does contain any sort of material error.
I'm desperate, already studied various forums without success and carried out various procedures without success as well.
Can you help me? Anyone?

Thanks for the reply.

Yes, both had.

I changed network cards in Windows Server R2 E1000E VMXNET3 2012 and disabled the RSS with the command:

netsh int tcp set global rss = off

Also found a reference on issues between Windows Server R2 2012 and Notepad ++ (!):

https://communities.VMware.com/message/2298732 # 2298732

I ended up uninstalling.

Now, Let's pray that does not appear any more purple screen.

More suggestions that I need to know?

'No operating system found' when you create the new machine virtual de DVD

Hi, I had problems with the creation of a new machine virtual (Server 2008 R2). After the initial creation, I turn on - then starts immediately to the network. I tried to change the boot order in the BIOS and even removed the NIC via Virtual Machine properties. I built VMs repeatedly using this method. I use an ISO DVD that I know, I created works. I select "connect to E:\. "that is my DVD drive on my laptop and have restarted (loses connection every time the DVD player). I even changed the type of E1000 VMXNET3 network adapter - makes no difference.
I feel good and truiy perplexed!
Any ideas?

You can connect the ISO remote only when the virtual machine is running.

I suggest you set a delay (or get into the BIOS), in the property of the VM, press ESC during POST to enter the Boot Menu, select CD but wait to confirm.

Connect the ISO and now start to begin.

André

Change to VMXNET3 E1000 VMnic

Hi all
We have a requirement where we need to change the E1000 VMnic to VMXNET3. But the client VM implementation related to the Mac. Can we remove the E1000 and add new nic (VMXNET3) and always use the same Mac address (keeping the nic Mac manual type and deal with the same MAC address)?
Kind regards
Vikram.

Hello

Yes.

Turning off the existing MAC address

Remove the adapter

Add the new VMXNET3 adapter

Change MAC address manual and paste the copied in the first step MAC address.

I've tested this and the MAC address is accepted by the new adapter.

Assign points if you find the answer useful

Replace e1000 vmxnet3

Similar Questions

Maybe you are looking for