Replace my hard shore on late 2009 iMac.

Similar Questions

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Using Late 2009 Imac as external display for PC with display port 1.2

  Hi all

  Thanks for your time.  I searched for a definitive answer to this question before I go ahead and make a purchase.

  I have a Late 2009 Imac 27 ".  I would like to use it as an external monitor for my new PC, which is a graphics card EVGA GTX 970 with a displayport 1.2 output.  I'll be able to use a DisplayPort / mini displayport cable to connect to my Imac to use as an external monitor for my PC.

  The Imac doesn't have the speed I need for photo editing but I like the contrast and the size of the screen offers.

  Any input would be appreciated!

  Discover > use your iMac as a display with the target - Apple Support Display Mode

  

  The way I read the article, target Display Mode only supports the Mac iMac connection.

• Restore default without disk late 2009 iMac

  Can HI anyone help? I tried to restore an iMac 2009 end to the factory setting but I don't have the original disc, apple support said I could try the disk of snow leopard on their Web site, but this may not work and he didn't now I'm stuck in the boot OSX disc and cannot remove the disc or do hard recovery by pressing the command and r at the beginning.  I managed to erase the drive hard all the time, were not able to reinstall OS x.

  Is it gone forever? Any answer would be great.

  Recovery of the Internet only is not supported on iMacs 2009. Snow Leopard retail disk should work as I believe version 10.6.3 and end of 2009 iMacs come with 10.6.2. What happens when you try to install from the disc of detail? Your last resort may be to call Apple, give them your serial number and order a set of replacement original discs.

• late 2009 iMac desktop computer - time to go?

  My desktop iMac computer has six years this month, [late 2009 model] and provided the fault all this free time. I have upgraded the RAM 12 GB of 8 GB a year ago.

  My iMac is linked to a Maxtor external drive old eight year which runs on Firewire 400 [Mac is up to 800]. External drives is full at 85%, while the internal drive of the Mac is only 10% full.

  The IMac is scrambling to run Photoshop elements 13. It's just excruciatingly slow in editing, but OK mode to the Organizer. It is also slow, but less than software image of Macphun so editing running creative Kit 2016.

  This slow performance is noticeable when I went to 13 items in Photoshop. I wonder if it's related to the lack of speed by updating the internal hard drive and make the Time Machine backups running every hour so at the time where he finished one, it's almost time to start over. Recovery from the external drive is OK.

  To get a new 2 TB external hard drive, to say I seem to need firewire 800 and Thunderbolt. LaCie is the brand only I found which is an external hard drive at once [Thunderbolt will be required when I buy a new IMac]. My IMac built in wifi is not compatible with the new Apple Time Capsule.

  The problem has a number of different options available. Who would you?

  I have 2 mid iMacs 2007 that work very well.

  You have been the victim of misinformation.

  There are well 2 t (and more) disks that use USB or FireWire available. No necessary crush.

  WiFi from your iMac is compatible with the new Apple Time Capsule.

• Late 2009 iMac Sierra gel & incomplete close

  Hi all

  I did a clean install of Sierra on my iMac late 2009, 3.60 GHz Intel Core 2 Duo, the 12 GB of RAM, a 1 TB drive, ATI graphics card. Everything seemed to happen. Now, I have two problems:

  1. at least twice daily than the iMac just hangs. The mouse moves, but can not select anything. Cmd - Tab will not pass applications. Keyboard does not respond. All I can say is that I always Mail, Safari, & Open Office 4.1.2 running. Have to hold the power button to turn off and restart.

  2. at the end of the day, when I stopped, the process is not finished and I just get a black screen (computer for desktop is black, but the items on the desktop are not visible), with the only docking station. Still, the only way out seems to be to hold down the power button to turn off.

  Anyone else having these issues? Is it that I can save for a clean install of Yosemite that worked perfectly before?

  Many thanks in advance,

  gimbers

  Hi aihometech,

  I understand that since the update of your iMac, you had some problems with the performance and the closure of your iMac. I know it's important to have a reliable work computer, so I'm happy to help you.

  We will have reset you the SMC on your iMac, which can often help with performance problems:

  Reset the management system (SCM) controller on your Mac - Apple Support

  If you still have questions thereafter, do this test in a new user account and view the results:

  How to test a question in another account on your Mac - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Update late 2009 iMac 21.5 "GPU

  I have a 21.5 "iMac, 3.06 GHz Core 2 duo with a SSD and 8 GB of RAM. The video card is the NVIDIA GeForce 9400 with 256 MB of VRAM. Is it possible with this model, to level or replace the GPU at all? May not deal at all with Final Cut Pro. I use El Capitan.

  Otherwise, I'll continue to use my MacBook Pro with Radeon R9, but I would if it had a better GPU.

  Thank you in advance,

  Luke

  It is not possible.

• What is the best method/app to remove the old files on a late 2009 iMac?

  Want to clean and remove some old files, on which some I don't even know.  What is the best method, and or the app? I have airport time capsule as back up.

  Look at and think are the best, there is no app that comes already to know your preferences.

• Late 2009 iMac Memory Card Slot Gone Bad?

  My memory card seems to have stopped working. Is there a way I can tell if it's the memory real slot hardware vs whether software or my SD card.

  I have reset PRAM and SMC. I had to reset the PRAM periodically to retrieve my startup chimes. I was wondering if they can be connected.

  I did first aid utility disk on the map and it seems to be OK, for what is disk utility is.

  It started with my card being ejected unexpectedly. If I reinsert the card, the card is not recognized.  This would solve usually solve the problem until the next time.

  Any help appreciated.

  First thing to do is clean

  a thin long brush, blower, vacuum.

• IMac late 2009 - 5 yellow bars on the screen - sometimes...

  Hi all..

  I recently bought an iMac late 2009 really nice second hand.  It worked wonderfully for a few weeks and I was about to become a mac convert.

  All of a sudden things have changed.  I pulled to the top of the machine first thing the morning only be greeted with lines to the bottom of the screen and a stall on a white screen.  The next day, it worked fine for a while.  Then the problem comes back for an hour or two.  Then back to yellow bars.

  I pulled up to my PC and started researching and found suggestions that this could be a graphics card problem.  After some time of reading and discovery, I pulled the top of AHT, and he advised me that there is actually a problem with the machine, and it's a sensor on the HARD drive.  Then, I would expect an additional error that could somehow link to the screen and absolutely nothing.

  Now, I know that historically the 27-inch late 2009 iMac screen / GPU has been examined by several different sites and forums but it is now an old machine and I don't know what to do.  What is a HARD drive failure?  Seems very unlikely but the only error listed... The flaw is GPU displayed on AHT down?  If this graphics card has received a "reformatting of oven" at a given time in its life and Ive been sold a dunce?

  Any advice would be great.  I don't have an Apple store near me and I don't know if they would even look at a machine this old.

  Help, please... My brief relationship was positive that ended quickly in tears!

  Alan

  Take it to an Apple authorized Service provider in your area, click on to start Apple authorized Service Provider Locator to find one near you.

• New RAM cards are in the slot on the iMac 27 "late 2009?

  does anyone have experience that new RAM cards does not match the slot to the iMac 27 "late 2009?

  The computer has been identified as an iMac 27-inch late 2009 model correctly?

  In the affirmative - download of database http://mactracker.ca feature - specs are:

  Introduced October 2009

  Abandoned July 2010

  Model identifier (Core 2 Duo) the iMac10, 1 iMac11, 1 (Core i5, i7)

  Model number A1312

  EMC 2309 (Core 2 Duo) - EMC 2374 (Core i5, i7)

  MB952LL/A order number (3.06 GHz), MB953LL/A (2.66 GHz)

  Memory maximum 32 GB (Core i5) or Core i7 real16 GB (Apple)

  Memory slots 4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • Installation of memory in an iMac - Apple Support

  Read carefully this ^ support article since there are several different model iMac features listed.

  Processor: Intel Core 2 Duo (E7600, E8600), Core i5 (750) or Core i7 (860) ('Wolfdale, Lynnfield')

  Processor speed: 3.06 or 3.33 GHz (Core 2 Duo), 2.66 GHz (Core i5), 2.8 GHz (Core i7)

  Architecture: 64 - bit

  Number of cores: 2 or 4

  Cache memory: 3 MB (3.06 GHz) 6 MB (3.33 GHz) L2, 8 MB (2.66, 2.8 GHz) L3

  System bus: (3.06 GHz Core 2 Duo) to 1066 MHz or 1333 MHz (3.33 GHz Core 2 Duo)

  -2.5 GT/s (Core i5 and Core i7) or Intel Direct Media Interface (DMI)

  Graphics Card ATI Radeon HD 4670 or Radeon HD 4850

  Graphics memory 256 MB (Radeon HD 4670) or GDDR3 512 MB (Radeon HD 4850)

  Where did you get the RAM and what are the specifications and the brand name?

  • Memory specifications for 'late 2009 iMac 27-inch model' of OWC, macsales:

  http://eShop.MacSales.com/shop/memory/iMac/DDR3_21.5_27

  Two sellers of quality focused on the Mac are OWC, macsales and Crucial.com. You would still be

  to identify the model of computer generation exactly & get quality RAM for them to work.

  And notice the shape of the keyway of the memory chips that they need to be oriented correctly

  in order to fully and properly inserted into the slots. If they are the correct specification for your iMac.

  Good luck & happy computing!

• What SSD for early 2009 imac?

  Hello

  I have a question to choose the good ssd for my imac 7y/o (9.1) since early 2009.

  I found a few good SSD as the samsung 840 BX100 or critical, but I've also read several times that a ssd sata3 will use sata1 when installed on a sata2.

  And that is why it is better to install a sata2 ssd.

  IS that still the case today? Given that these messages are coming from 2013.

  Or is that I can put in an ssd sata3 and it will run on sata2?

  Kind regards

  Ivo

  SATA III drives that use the Sandforce controller will come back to SATA I speed if installed on a computer that uses the Nvidia MCP79 SATA controller. Samsung does not Sandforce. My Macbook in early 2009 with a Samsung 840 (pre Evo, not Pro) negotiates the SSD SATA II speed, connected to the MCP79.  OWC also still sells SATA II disks, I have one in my late 2009 iMac. I chose this drive, even if it was more expensive because OWC insisted that my model should have the Nvidia controller but in reality it has controller Intel 5 series. I didn't take my iMac except more than once.

  Confused? Yes I know...

• How much would it cost to replace the video card on an imac 27 "late 2009

  I have an imac late 2009 27 "with an ATI Radeon HD 4850 512 MB video card. He made rare as small squares on the screen and stuff of course freeze everything. Sometimes when it starts, vertical lines if poster and nothing else can do. I have to restart the computer several times. I know that is the video card, how much would it cost to replace it in the apple store?

  The computer is too old for Apple to watch. you will need to find a place to third party to look at.

  Vintage and obsolete products - https://support.apple.com/HT201624

  "Vintage and obsolete products.

  Owners of iPad, iPhone, iPod or Mac can get services and Apple parts or service providers for 5 years after the product is no longer manufactured (or longer when it is required by law). Apple has stopped support for certain technologically obsolete products and vintage.

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• Can I put a Seagate FireCuda drive in my iMac late 2009?

  Apple Hardware Test (AHT) says that my SATA drive, 1 TB in size, has a problem.  Nothing specific indicated. The code given is: 4HDD/11 / 40000000:SATA (0,0)

  I was testing because of the prob trying to get a good download of macOS Sierra.  Looks like I need to replace a hard drive first.  I have an iMac late 2009 with a Core i7 quad core, 16 GB DDR3 1067 Mhz ram and ATI Radeon HD 4850 graphics card.  I can put a SSD in this unit or am I stuck with the Barracuda drives.  I'm looking for FireCuda readers and like what I see and read about them.

  If you want an SSD, then I highly recommend:

  • Samsung 840.
  • OCZ ARC100 and other models.
  • OWC 3 G SSD.

  The foregoing is all compatible and should work well. Your model only supports SATA 3 Gb/s speeds due to the controller, so don't waste your money on more expensive discs of 6 G or 6 Gbps because they work faster than a car of 3 G. If you decide on a 6 GB drive, however, they must be compatible as they work on the slower bus of 3G.