replace NULL values for not null values prior

Similar Questions

• Replace NULL values with 0 to Pivot

  Hi all
  
  I use a union query, I need to display 0 instead of NULL values. I tried various methods such as ifnull(), case; I could see in the table, but not in pivot of 0.
  I tried and succeeded in placing '-' instead of null. If I put a line chart the chart seems meaningless.
  Can someone suggest me this chart & pivot.
  
  Thanks in advance,
  Jerome

  Hi Leila,

  Hope this link helps you

  [http://total-bi.com/2010/10/replace-nulls-in-obiee-pivot-table/]

  By,.
  KK

• RTF model - replace null with 0

  Hello
  
  I created an RTF model for burst into BI Publisher. For specific fields I use COUNT/SUM functions, I find here where there is no value returned in a calculation does not return NULL (Blank). Is is possible to replace with 0 instead? I am also using a conditional region where point is equivalent to... and using a COUNT/SUM function to roll up the data.
  
  I just want to replace NULL values with 0
  
  Can anyone help?
  
  Thank you

  Were you able to solve this problem?
  If not send an email with your sample xml and RTF

• Replace negative values in multiple channels with "0'.

  Hello

  I'm calculating and then by creating a cumulative channel, multiple channels. Negative values in these channels aren't necessary, and I need a nice way to replace each negative value in these channels with a value of '0'.

  My current code is:

  Do
  Do
  If Data.Root.ChannelGroups (2). Channels (i). Values (II)< 0="" then="" data.root.channelgroups(2).channels(i).values(ii)="0    ">
  II = ii + 1
  Loop until the second > Data.Root.ChannelGroups (2). Channels (i). Properties ("length"). Value
  II = 1
  i = i + 1
  Loop until I > Data.Root.ChannelGroups (2). Channels.Count

  It works, but I don't like. He adds a few seconds when running my script, which was almost instantly. Is there a better way to do it?

  Thank you.

  Hello Kevin,

  The fastest way to go through a channel and check the values less than or equal to 0 is through the canal's calculator. The code below takes all the channel first channel group (with the exception of the first string that is be the weather channel in my example data set) and replaces the values<0 with="" 0="" through="" the="" iif="">

  Set Group = Data.Root.ChannelGroups (1)
  
  iMax = Group.Channels.Count
  
  FOR i = 2 to iMax
  
    Adjust the strings = Group.Channels (i)
  
    Formula = "= IIF (y '.<0, 0,="">
  
    Call to calculate (formula, Array("y"), Array (Channel))
  
  NEXT ' I

  In this example we overwrite the existing values of data channel with 0, but you can also copy the channels to make sure that your raw data is available.

  The calculator of channel is extremely fast for this type of operation because it does not create a loop to go if each line separately and check the values he...

  I hope this is useful,

  Otmar

• How to replace the value of a column in a table based on the value in the second column?

  Hi, I would like to find in a table 2D for values that meet certain criteria (for example, a column< 0.98).=""  based="" on="" which="" rows="" meet="" this="" criteria,="" i="" want="" to="" replace="" the="" values="" in="" a="" different="" column="" of="" the="" array="" (change="" to="" 'nan'="" so="" that="" the="" values="" will="" not="" be="" included="" in="" any="" calculations="" on="" that="" column,="" for="" example="" the="" finding="" the="" mean).=""  i've="" attached="" a="" sample="" .csv="" file.=""  if="" the="" values="" in="" column="" 3="" (index="" 2)="" are="" less="" than="" 0.980="" (or="" some="" other="" user="" defined="" value),="" then="" the="" value="" in="" column="" 2="" (index="" 1)="" should="" be="" replaced="" with="" nan.=""  can="" someone="" help="" out="" with="" this="" search="" and="" replace="">

  Thank you

  Keith

  (using LV 2009 SP1)

  A few quick hits.

  You can merge the two for loops

  You have not need one of the constants 1 and 2 in the index table.  They will solve automatically when you expand on the index picture, once you have wired to 0 in the column index.

  It seems a lot of handling additional table spent unnecessarily.

  See below.  I did not try to duplicate your code to see how it actually works, but I believe that I have attached will give the same result with less steps.

  

• Replace different values in different cells

  Hello

  I'm new to LabVIEW and work with a tool that retrieves its settings in an Excel file. I need to change these settings in Excel using LabVIEW. The Excel file is formatted as .xls (97-2003 version). The PC has Microsoft Office installed 2013.

  I'm using LabVIEW 2014 (64-bit).

  Task:
  I want to change the values in 3 different cells in an Excel worksheet and save the workbook (not save as).
  The main vi is saved in the library in the zip file, it is called 'change the 3 values in excel.vi '.
  The excel file is fixed separately.
  I don't think that it matters where these cells are in the Excel worksheet, Excel memory seems to remember the selection of cells in all cells but replaces the value with the last mentioned in the last under vi.

  Problem:
  (1) any change of cells to the same value that I set in the third sub vi.
  (2) Excel wonder SaveAs and does save not only on the existing file.
  (3) the Excel application is not closed, but I can't understand why.

  Please advice. Help on all these issues is highly appreciated.

  Thank you!

  Here is how I could do this.  I would use the Report Generation Toolkit (which is included in LabVIEW 2014).  This example is a simplified version of your task-you are given the name of an Excel workbook to change, the index of the worksheet to be used, the cell address Excel (in format Excel, for example, A1, for example) and the value of the cell that you want to insert here.

  

  The first function is the new report, which is a slight misnomer, as we use it as 'Report to replace' wiring on behalf of the State existing and specifying that we hear an Excel report (it opens Excel - if you don't want the workbook to be visible, open it reduced).  We then call get Excel spreadsheet (which is not necessary if we use the first worksheet...).  We use Excel table easy to put the value of the cell in the Excel cell chosedn.  To do this, we first use Excel Excel get a location to convert, say, B3, line/column indexes (B3 = 1, 2) and this group in a Cluster.  We also need to convert the value of the cell in a table 2D what we do by passing through two functions of table build.  Then save us report to the file using the original Excel workbook path and finally alienate us report goes out Excel.

  If you had multiple cells that you want to update, I would like to consolidate Excel cell and cell value in a cluster, build an array of clusters, then put the Excel easy table function in a loop, and do the updates one at a time.

  It should work very quickly - the whole process should take a fraction of a second.

  Bob Schor

• Replace a value to the last value that

  Hi all.

  I'm a LabVIEW' relatively new er and I have a problem that perhaps for some people is easy to solve.

  I need to replace a value in a table when it exceeds a given threshold it replaces the value exceeded with the last natural not to exceed value. Make sense?

  I try to integrate a case Structure and so far I think I got right with the situaiton TRUE but I need help with the WRONG situation.

  Thank you!

  
  

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• How can I replace the value of the column with a particular value in SQL

  Hi all
  
  Is someone can you please tell me how can I format my output with the replacement of a column value with a specific value that really depends on the current value of the column
  
  I am executing the following SQL statement
  
  Select state, count (id) from < table_name > where composite_dn = < composite_dn_name > Group by State;
  My current performance is:
  
  State Instance number
  1 3
  3 28
  
  I want to replace the value in the State column as follows
  
  No.OfInstances State
  3 filled
  28 faulted
  
  I want '1' to be reppaced of 'Done' and '3' is replaced by 'Faulted. '
  
  Is is possible with SQL or PL/SQL, if it is then how I can achieve this required. Help, please!
  
  Thanks in advance!
  
  Published by: Roshni Shankar on October 27, 2012 12:38 AM

  Hi Claude,.

  I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
  See - http://www.techonthenet.com/oracle/functions/decode.php

  select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
  from  t2, (select state,count(id) count_id
   from 
   where composite_dn= 
  group by state) t1
  where t1.state = t2.state_id;
  

  HTH
  Vanessa B.

  Published by: Vanessa B on October 27, 2012 14:02
  -link added

  Published by: Vanessa B on October 27, 2012 14:19
  -added code sample

• How can I replace a value

  Hi guys,.
  
  Maybe, you can help in this query,
  
  SELECT crm where the project = Br: P2_Project
  
  : P2_Project: is 'point a value in a list of values' that contains X, Y, Z
  
  Only if the value of 'X' is selected, then it should be replace another value such as 'A'; It should then be compared against the values of the project column.
  
  How can I do this...? I hope that my question is simple...
  
  Best regards
  Fateh

  Hello

  What you posted is equivalent to:

  SELECT distinct
       br
  FROM      crm
  where      project = CASE
                 WHEN  :P2_PROJECT IN
                      ( 'ET-H'
                      , 'ET-B'
                      , 'ET-C'
                      , 'ET-D'
                      , 'ET-E'
                      , 'ET-F'
                      , 'ET-J'
                      , 'ET-K'
                      , 'ET-M'
                      , 'ET-L'
                      )
                 THEN  'ET'
                 ELSE  :P2_project
             END
  ;
  

  It's a little less coding, and (I think) clearer.
  In Oracle 10 (and more) you can do this, too:

  SELECT distinct
       br
  FROM      crm
  where      project = CASE
                 WHEN  REGEXP_LIKE ( :P2_PROJECT
                             , '^ET-[HBCDEFJKML]$'
                             )
                 THEN  'ET'
                 ELSE  :P2_project
             END
  ;
  

  but, if the list of values never changes so that it follows such a clear trend, then it might be more difficult to maintain.

• Clone error: warning: could not replace the variables for message ADX RC-50004

  Hello
  
  We are cloning 11.5.10.2 Prod environment in the DEV environment.
  The structure is as follows:
  Node 1: DB + competitor Manager
  Node 2: Application Apache (forms and reports)
  
  We run the adcfgclone.pl successfully on the nodes of the db and apache
  We received the following error message when it is applied on the concurrent Manager node
  
  ERROR: creation of context not completed successfully
  
  Check the log file and found the following:
  Database utility - ADX finished-
  
  WARNING: Could not replace the variables for message ADX RC-50004
  
  
  StackTrace:
  java.lang.NullPointerException
  to oracle.apps.ad.tools.configuration.CVMHelper.getDBInitParameters)
  Compiled code)
  at oracle.apps.ad.tools.configuration.CVMHelper.getDBName (Compiled C
  ODE)
  at oracle.apps.ad.context.CloneContext.setDatabaseName (Compiled Code
  )
  at oracle.apps.ad.context.CloneContext.doClone (Compiled Code)
  at oracle.apps.ad.context.CloneContext.main (Compiled Code)
  
  
  Unsuccessful creation of context files
  
  
  
  Also, we checked the alert log database (9.2.0.7) and found the following error:
  ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [],]
  ], [], []
  
  
  We follow action plans in the notes:
  Note 726509.1
  Note 304037.1
  
  Again, we have the same error and can not clone concurrent Manager node.
  
  Enjoy a quick answer because we are in the middle of the execution of the project.
  
  Thank you

  Salvation;

  Check Please Note: run perl./adcfgclone.pl appsTier ORA-00600: internal error code, arguments: [ttcgcshnd-1] [263298.1 ID]

  It may be useful

  Respect of
  HELIOS

• a configuration of VM for not using independent, no persistent record

  I am configuring a Virtual Machine ESXI5 VMX file for not using independent, no persistent record.

  When I add the Keywork and value:

  scsiX:Y.mode (X and Y > = 0) = "persistent".

  in the vmx file and add it to the inventory, the virtual machine is not valid.  I have to either delete the keyword or # line birng the system back online.

  Is it supposed to be a value for X and Y or a different key word to use?

  
  

  x and is the abbreviation for controller and port

  If you want to set the mode of
  scsi0:0 - you would use
  scsi0:0.mode = persistent "independent-no.
  or
  scsi0:0.mode = "independent-persistent."

  or

  scsi0:0.mode = "persistent".

  Also - where have you found the trick to do? -C' is quite missguiding.
  I suggest take you a look at the vmx directly - then you'd have you seen what must be entered

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.

• REPLACEMENT-E06C - fan does not work, need a replacement.

  Hello.

  I have a laptop REPLACEMENT-E06C. It seems that my CPU fan no longer works.

  Before I've had my laptop apart, I would like to prepare with the right components. I would like to ask what is the code of product FAN, so I'll be able to order a replacement fan?

  can you also provide me with a few REPAIRS, which will help me to disassemble the laptop in good condition.

  Replacing the fan should not be any problem for me, so I'm really counting on you, guys

  Thanks in advance.

  Hello:
  
  Data sheet: http://support.hp.com/in-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5048664/model/5095878/document/c02776678/
  
  Page 30 - Manual:
  http://h10032.www1.HP.com/CTG/manual/c02842252
  
  You need HP 640426-001 part number
  
  http://m.Newegg.com/product/index?ItemNumber=9SIA3DY1S03974
  
  http://www.Amazon.com/GP/AW/d/B008H69A8W/ref=redir_mdp_mobile/180-6986731-6083948
  
  http://m.eBay.com/ITM/new-for-HP-Pavilion-640426-001-cooling-fan-with-heatsink-640426-001-/321643463885
  
  http://m.eBay.co.UK/ITM/genuine-new-HP-dv7-6099EE-DV6-6154ea-heatsink-and-fan-640426-001-original-/371140007537
  
  How to replace on Page 90-95
  
  Concerning
  
  Visruth

• With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  With Windows XP Professional X 64 expire, what is the replacement? Windows 8 not compatible.

  Windows XP 64-bit is one of those odd elements that does not quite fit in.  It is based on the code of Windows Server (hence why it only goes back to the SP2 not SP3 as Windows XP did) so it is - upgrade (for purchase in any case) options are limited.  Frankly - Windows XP 64-bit is one of these products, most people should have just skipped (in my opinion) - and with this in mind - the replacement for those running it should be to get Windows Vista 64 bit or Windows 7 64-bit or 64-bit Windows 8.  It there just will be no discount to do on monetary incentive plan.

  My suggestion - if your system is good enough, compatible, etc. and you actually * needed * to upgrade (it's not like YOU all just because Microsoft will stop their support extended to it in 2014 - big deal?)  Download Windows 7 Professional 64-bit and clean install.  You can use the free Windows XP (32 bit) MOU to run many older programs, you have * if * you have one that cannot be run under Windows 7 or with the compatibility mode.
   
  In addition - get an unknown computer (for you).  You can find a lease one or something with Windows 7 64-bit, probably for the same amount you'd pay for a version non - OEM Windows 7, pay a little more and you'll probably have a machine that could handle Windows 8 - If you wish.  ;-)

• replacement HARD drive for dv7

  I have a Pavilion dv7 and I need to replace the HARD drive, I searched online for a replacement hard drive for her but I'm not sure of the good replacement of hard drive I need. service number is .theres dv7 - 1237cl a lot of picks and I used to make sure that I get the good Hdd but I don't want something cheap. what I have now, it's 500 gb Hdd and 4 GB ram upgrades I can do would be helpful too. I have 5 Hps and this my favorate a .i woild be thankful for any Hiep.

  Thank you very much for yor assistance I'm buyin the hybrid drive today and I will continue the ram as is for now and upgrade later. Once again thank you