RTF model - replace null with 0

Similar Questions

• Replace null with another field field

  DW CS3 - ASP

  Is it possible to use VBScript to check and replace a field with another field null in the cell of the table of the region a repeat?  I had very little experience with VBScript.  I did experiences but cannot get anything to work yet.

  Not all pets have a name, but all pets have a code.  If the petname field is null, so I want to replace it with petcode.  Is - it closer?

  < %

  If (rs_pets. Fields.Item ("petname"). Value) = IsNull Then

  Replace (rs_pets. Fields.Item ("petname"). (Value), (rs_pets. Fields.Item ("petcode"). Value)

  End If

  % >

  Post edited by: christinett

  > Is this closer?

  Sort of. Test you NULL values by using the IsNull function. The function takes the value of the recordset as a parameter. In addition, you would not use the function replace. Replace is good to replace a portion of a string.

  <>

  var petID

  If IsNull ((rs_pets. Fields.Item ("petname"). (Value)) Then

  petID = (rs_pets. Fields.Item ("petcode"). Value)

  ELSE

  PetID = (rs_pets. Fields.Item ("petname"). Value)

  End If

  %>

  Or, since you will eventually the output value, you don't need the variable, just output the correct value (petname or petcode) using response.write in the appropriate location.

  <%

  Si IsNull ((rs_pets. Fields.Item("petname"). Value)) Then

  response.write (rs_pets. Fields.Item("petcode"). Valeur)

  ELSE

  response.write (rs_pets. Fields.Item("petname"). Valeur)

  End If

  %>

• PivotTables - replace null with 0

  Hello
  
  I created a PivotTable in summarizing the values against certain categories of responses. There seems to be several blank values summarized, I used the IFNULL expression on both the column in the answers and also layer MDB, I changed the phrase to include IFNULL on the fact column. It has not taken effect, is there another way to fill in NULL values with 0?
  
  Thank you

  Hello

  IFNULL won't work in Pivot.You can use this workaround by Kishore on the link below

  http://bischool.WordPress.com/

  Thank you
  Sandeep

• RTF model for XML with two lines

  Hello
  
  I have an XML where the data comes from two sets of lines. The XML example is given below:
  <? XML version = "1.0" encoding = "UTF-8"? >
  -< ListBillingAccounts >
  -< CutInvoiceSubAccounts >
  < BillingNumber > 23232 < / BillingNumber >
  Dinesh < name > < / name >
  -< ListPaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 4444555566667777 < / AccountNumber2 >
  < / PaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 4444555566668888 < / AccountNumber2 >
  < / PaymentProfile >
  < / ListPaymentProfile >
  < / CutInvoiceSubAccounts >
  -< CutInvoiceSubAccounts >
  < BillingNumber > 12345 < / BillingNumber >
  Jayesh < name > < / name >
  -< ListPaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 44445555222255555 < / AccountNumber2 >
  < / PaymentProfile >
  -< PaymentProfile >
  < AccountNumber2 > 44445555666699999 < / AccountNumber2 >
  < / PaymentProfile >
  < / ListPaymentProfile >
  < / CutInvoiceSubAccounts >
  < / ListBillingAccounts >
  
  I want to show data from two sets of lines into a single line in a table. for example: Dinesh has two AccountNumber2, 4444555566667777 and 4444555566668888.I want to show in the table with two lines. Something like this:
  Dinesh 44445555666677777
  Dinesh 4444555566668888
  Jayesh 44445555222255555
  Jayesh 44445555666699999
  
  How can I achieve this with an RTF?
  
  Please notify.
  
  Thank you!!

  Put a loop on the paymentprofile

  
    - 
  
  

• Replace white with hyphen in rtf model

  Hello

  I'm working on a RTF (BI publisher) model, in which I want to replace empty values with - (dash). Not sure how the conditional region code will look like.

  I tried..? xdofx:If TOTAL_ARREARS = "0 end if? > to replace empty with 0. It worked well and displays 0 for empty values in pdf report.

  I tried to use the same with little change (see below)

  <? xdofx:If TOTAL_ARREARS = "-complete if? >. But when downloading at APEX > he could not display in pdf report. I can't even open the pdf document. Indications will be useful. Thank you

  -It worked because 0 is considered as a numerical value

  -It has failed because that - is a string and you need to enclose it with quotes like below

• BI Publisher RTF model - fill a cell with a group without line breaks for each element

  I have a fairly rigid rtf model with multiple cells. A cell in particular just display a value of a single group.

  I want to display all the values of group in the cell, but instead of display each value on a new line of the

  cell and cell resizing, I need a way to repeat the values (we hope) without resizing the cell.

  Thus, for example, given a simple group such as < GROUP > < VALUE > where the GROUP contains the VALUES 1, 2, 3, 4 and 5.

  a normal <?-foreach: GROUP? > <? VALUE? > <? end foreach? > product

  CELL
  OUTPUT: 1 2 3 4 5

  What I would like is to be able to output the following (assume the slot size cell is not resized one appears exactly as it does in the rtf)

  CELL
  OUTPUT: 1 2 3 4 5

  The tricky part is that I'd love to be able to have the text wrapping, once he arrives at the edge of the cell. Is there a simple way to do this?

  After a search in a dozen of nets beforehand of course, I find the answer, about 10 minutes after the announcement.

  Knew it was something simple!

• Problems with highlighting of the rows of the table through RTF-model

  Hello!

  Peace im new in the world of BI Publisher. For the moment, I try to create and RTF-model with the Office AddIn for Word Bi-editeur (2010). I want to create a table based on a table of a pdf document existing already. I have all the data in the right format and order and just worked fine - until I wanted to change the background color of some specific lines.
  If I add that a statement such as

  <? If: Variable = "Expressionstring?" > <? attribute@InContext:background-color;' #FFFF80 '? > <? end if? >

  the context of the evolution of the entry. But the fact the line height. It develops. The expressions more that I use more it grows. That of not good, because the table is so great that it only fits on a single page with fine lines... I tried to apply a height specified in the line through the word, but it does not work.
  I searched a couple hours and still didn't find anything regarding this problem. I appreciate any ideas how to solve this problem.

  Tounsiiaa in advance

  Gabriel

  To help those who have a similar problem: it's just like sfr.farhan.fani wrote. I try to give you a general expression:

  
  

  <? If@row:ROWNAME=VALUE? > (this should work with = > etc do not forget the ' ' for strings etc..)

  < xsl: attribute name = 'background-color' xdofo:ctx = 'incontext' > lightgray < / xsl: attribute > (lightgray can be changed to hexa% and %valeurs)

  <? end if? >

  Hello

  Try the following expression

  5000? >

  LightGray

• Problem with RTF model with columns &gt; 63

  Hello

  We use the XML editor in Oracle EBS 12.1.3.

  I have a relationship with more than 100 columns, for which I created an RTF model with going out to Excel. I fell on the boundary of Word of 63 columns in a table.  To get around it, I created a table with 2 columns and each column insert a table of columns about 58.

  Well, it seems to work 90% of the time.  But at the end of the excel sheet the last 20 or if data lines have sometimes 58 columns in the column in the external table empty.  The second cell of the outer table is a large cell empty.

  The issue seems to occur when there is a lot of data in the report.  If I run the report on specific lines containing questions the data is displayed correctly.

  Everyone has faced something like this?  Or have any ideas on how to debug what is happening?

  Thank you

  -Johnnie

  Hopefully the new XSL - FO model is selected in the Options tab, when you submit the request. Output XML code usually means - an error (if the program terminates with an error) or the mapping of model not done correctly (if completed normally).

• RTF model. body with two loops and custimized footer

  Hello.
  I have a rtf model with a body and a custom footer. The body has two loops. The first loop x cheques and the second for loop for x elements of each control.
  The footer must be individually for each control. Is there a possibility of variable access from the first loop of the body in the foot?
  
  the structure of my rtf file:_
  header: vacuum
  body:
  <? for-each: Scheck? >
  An asfdfadsfasdf: <? One? >
  
  
  
  Article price
  <?-foreach: point? > <? name? > <? price? >
  <? end foreach? >
  
  Summe: <? sum (price)? >
  
  <? model: footer? >
  <? One? > does not work*.
  <? end model? >
  
  
  <? split-of-page-break:? > <? end foreach? >
  
  
  
  footer:
  empty space
  empty space
  empty space
  empty space
  empty space
  empty space
  empty space
  empty space
  empty space
  <? Call: Footer? >
  
  
  
  
  
  
  an excerpt from my xml file:_
  < root >
  < Scheck >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < item > < name > Kunststoffe < / name > < price > 22000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 100000 < / price > < / item >
  < item > < name > Holz < / name > < price > 6000 < / price > < / item >
  < item > < name > paper < / name > < price > 100 < / price > < / item >
  < Payment > HUNDERTACHTUNDZWANZIGTAUSENDEINHUNDERT < / payment >
  < a > Firma1 < year >
  < / Scheck >
  < Scheck >
  < element > < name > end < / name > < price > 2000 < / price > < / item >
  < item > < name > Metalle < / name > < price > 10000 < / price > < / item >
  < item > < name > Holz < / name > < price > 600 < / price > < / item >
  < item > < name > paper < / name > < price > 10 < / price > < / item >
  < element > < name > end < / name > < price > 2000 < / price > < / item >
  
  
  Thank you for helping me!
  
  Edited by: user12052573 the 19.05.2010 02:00

  Hello

  change your main loop shape

  This will create a new page with a section break for each change in 'Scheck. You can remove your split sentence of page break.

  -Karine

• With regard to the RTF model: enter the commands in your RTF model

  Hi all
  
  
  
  I read the Oracle Documentation saying: "entry of the orders in your RTF model."
  
  
  I tried to look at this one, I have a requirement.
  
  Really how can I enter the commands in RTF model. I didn't get this one a lot.
  
  Any help is very appreciated as always :)
  
  Thank you
  Xavier

  Well, my OPE user's guide did not have the mentioned pages but I watched this guide: http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188.pdf

  and given the documents, you need just to include controls in a form field in the foreach loop for the element you want to split the document by... You could insert a form field and then double-click the field, go to the properties of Word-> add-> the status bar help text and change the code following the instructions in the guide.

  Hope that helps.

  Bipuser

• Replace NULL values with 0 to Pivot

  Hi all
  
  I use a union query, I need to display 0 instead of NULL values. I tried various methods such as ifnull(), case; I could see in the table, but not in pivot of 0.
  I tried and succeeded in placing '-' instead of null. If I put a line chart the chart seems meaningless.
  Can someone suggest me this chart & pivot.
  
  Thanks in advance,
  Jerome

  Hi Leila,

  Hope this link helps you

  [http://total-bi.com/2010/10/replace-nulls-in-obiee-pivot-table/]

  By,.
  KK

• RTF model and parameters

  Hello
  
  I am a new user of ad BI and I had a few problems.
  I'm trying to insert the parameters in my RTF model to list only the project I want.
  
  I made my request SQL two lists of values, one for the project and another for the Department.
  My RTF is to show me, for a project and a Department, a list of the people who work there.
  So, for now I am able to view a list of each project and the Department with users, but I can't chose just one project.
  
  I saw on several thread I should use <? parameters@begin:RELPARENT? > and so when I want to use it I have to write <? $RELPARENT? >.
  Could you help me and give me some tips like where I put my settings start or things like that.
  
  
  Here's my RTF model structure.
  
  Group of LINES by RELPARENT
  project: 'RELPARENT'-> projects I want to show only
  ASGNROLE group
  role: 'ASGNROLE'-> departments I want to show only
  Record name
  F REVNAME FRSTNAME LASTNAME E
  completed by ASGNROLE
  end of LINE by RELPARENT
  
  Here is my request on Bi Publisher:
  
  
  SELECT distinct VTMM_PERSON. LASTNAME,
  VTMM_PERSON. FRSTNAME,
  VTMM_STAFF. RELPARENT,
  VTMM_PERSON. REVNAME,
  VTMM_STAFF. ASGNROLE
  TO THINK. VTMM_STAFF, THINK. VTMM_PERSON
  WHERE (VTMM_PERSON. REVNAME = VTMM_STAFF. RELCHILD)
  and not (VTMM_STAFF. RELPARENT = 'Society')
  and not (VTMM_STAFF. ASGNROLE = 'SysAdm')
  
  Here is my request for a single list
  
  SELECT distinct VTMM_STAFF. RELPARENT
  TO THINK. VTMM_STAFF
  WHERE (VTMM_STAFF. RELPARENT! = 'Company')
  
  
  
  
  
  
  Kind regards
  
  Published by: user11869055 on 7 September. 2009 13:27
  
  Published by: user11869055 on Sept. 8. 2009 08:26

  Hello

  If you try to get the user to pass a parameter which will then limit the resutls in the output, you can use a parameter in the SQL for example (assuming that relparent and asgnrole are the columns, you should limit by):

  SELECT distinct VTMM_PERSON. LASTNAME,
  VTMM_PERSON. FRSTNAME,
  VTMM_STAFF. RELPARENT,
  VTMM_PERSON. REVNAME,
  VTMM_STAFF. ASGNROLE
  TO THINK. VTMM_STAFF, THINK. VTMM_PERSON
  WHERE (VTMM_PERSON. REVNAME = VTMM_STAFF. RELCHILD)
  and VTMM_STAFF. RELPARENT =: RELPARENT
  and VTMM_STAFF. ASGNROLE =: ASGNROLE

  You can then create two parameters in the definition of BI Publisher report called RELPARENT and ASGNROLE, create LOVs for them (sounds like you already have) and there you go. When the user selects the parameters, they are replaced in the SQL and you get limited results.

  You can also add a specific logic of db around settings to handle NULL values so that you get all values when a setting is selected.

  Kind regards

  Matt

• Replace white with "-" in the BI Publisher

  Hello

  I'm working on a RTF (BI publisher) model, in which I want to replace empty values with - (dash). Not sure how the conditional region code will look like.

  I tried..? xdofx:If TOTAL_ARREARS = "0 end if? > to replace empty with 0. It worked well and displays 0 for empty values in pdf report.

  I tried to use the same with little change (see below)

  <? xdofx:If TOTAL_ARREARS = "-complete if? >. But when downloading at APEX > he could not display in pdf report. I can't even open the pdf document. Indications will be useful. Thank you

  Please this post in the correct forum: BI Publisher

  This isn't a specific question regarding the APEX...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• code xdoxslt:Sum does not not in the RTF model: method not found "sum".

  We get the error when you run a RTF model customized using the application (Oracle HRMS) below and in Office BiPublisher for a particular set of data (1 employees check data). Format RTF model code which seems to be the cause of the error is the cumulative total code which is supposed to sum YTD_HOURS for all elements in the DataSet xml AC_EARNINGS:
  
  Problem code: <? xdoxslt:sum(YTD_HOURS_[.!_=''])? >
  
  The error message below it seems to be having trouble with the sum
  
  HRMS Oracle concurrent Manager error:
  
  java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:39
  )
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl
  . Java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate (TemplateH
  Elper.Java:5936)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate (TemplateHelp
  St. Java:3459)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate (TemplateHelp
  St. Java:3548)
  at oracle.apps.pay.core.documents.DocGenerator.process(DocGenerator.java:521)
  Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: method
  not found 'sum' to the oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
  at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
  at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
  at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
  ... more than 17
  
  HR_6882_HRPROC_ASSERT
  LOCATION pyjavacom:2
  APP-PAY-06882: Assertion failure detected at the location pyjavacom:2.
  
  Cause: an internal error has occurred at the location pyjavacom:2.
  
  Action: contact your Oracle customer representative.
  
  
  
  Note: The RTF check model works ok most of the time, but there is a problem with the model of XML data below. In this scenario, there is no YTD_HOURS and only one line of data for this employee, unlike the data second example of another audit below.
  
  The data that the code does NOT work with:
  
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  revenues of < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 58423 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10511197 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 1200 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 1584.8 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 25698.88 < / YTD_AMOUNT >
  Normal salary < REPORTING_NAME > < / REPORTING_NAME >
  < CURRENT_HOURS > 80 < / CURRENT_HOURS >
  < YTD_HOURS > 1312 < / YTD_HOURS >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL > 19.81 < / RATE_MUL >
  < RATE_RET / >
  < / AC_EARNINGS >
  
  Data that works with the code:
  
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  revenues of < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 58423 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10511197 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 1200 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 1584.8 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 25698.88 < / YTD_AMOUNT >
  Normal salary < REPORTING_NAME > < / REPORTING_NAME >
  < CURRENT_HOURS > 80 < / CURRENT_HOURS >
  < YTD_HOURS > 1312 < / YTD_HOURS >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL > 19.81 < / RATE_MUL >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  < ELEMENT_CLASSIFICATION > attributed gains < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 58444 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10511222 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 3250 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 1.46 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 25,51 < / YTD_AMOUNT >
  Life term for the Group < REPORTING_NAME > < / REPORTING_NAME >
  < CURRENT_HOURS / >
  < YTD_HOURS / >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  Additional gains < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 58431 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10511205 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 2500 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 9.6 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 163,2 < / YTD_AMOUNT >
  < REPORTING_NAME > dental CB < / REPORTING_NAME >
  < CURRENT_HOURS > 0 < / CURRENT_HOURS >
  < YTD_HOURS > 0 < / YTD_HOURS >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  revenues of < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 64614 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10518109 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 1526 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 0 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 1571.12 < / YTD_AMOUNT >
  < REPORTING_NAME > TOWP < / REPORTING_NAME >
  < CURRENT_HOURS / >
  < YTD_HOURS > 80 < / YTD_HOURS >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  revenues of < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 57863 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10510820 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 1200 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 0 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 937,2 < / YTD_AMOUNT >
  Holiday < REPORTING_NAME > < / REPORTING_NAME >
  < CURRENT_HOURS / >
  < YTD_HOURS > 48 < / YTD_HOURS >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  < ELEMENT_CLASSIFICATION > attributed gains < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 63592 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10517244 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 3250 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 0 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 285.07 < / YTD_AMOUNT >
  < REPORTING_NAME > F90 SVEU DIST < / REPORTING_NAME >
  < CURRENT_HOURS / >
  < YTD_HOURS / >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  -< AC_EARNINGS >
  < DATE_DISP_FLG > N < / DATE_DISP_FLG >
  Additional gains < ELEMENT_CLASSIFICATION > < / ELEMENT_CLASSIFICATION >
  < ELEMENT_TYPE_ID > 67074 < / ELEMENT_TYPE_ID >
  < PRIMARY_BALANCE > 10520289 < / PRIMARY_BALANCE >
  < PROCESSING_PRIORITY > 2500 < / PROCESSING_PRIORITY >
  < CURRENT_AMOUNT > 0 < / CURRENT_AMOUNT >
  < YTD_AMOUNT > 85.24 < / YTD_AMOUNT >
  < REPORTING_NAME > other Tx RRs < / REPORTING_NAME >
  < CURRENT_HOURS / >
  < YTD_HOURS / >
  < RATE / >
  < CURRENT_DAYS / >
  < YTD_DAYS / >
  < ATTRIBUTE_NAME / >
  < ORIGINAL_DATE_EARNED / >
  < EFFECTIVE_START_DATE / >
  < EFFECTIVE_END_DATE / >
  < ELEMENT_CATEGORY / >
  < JURISDICTION_CODE / >
  < RATE_MUL / >
  < RATE_RET / >
  < / AC_EARNINGS >
  
  
  If anyone has any ideas as to what is necessary to resolve the issue we have in our company can you please let me know? I appreciate your time. If you need more information please let me know and I'll post it.
  
  Thank you
  
  Greg
  
  Published by: gtruta on November 20, 2012 16:20
  
  Published by: gtruta on November 20, 2012 16:21

  xdoxslt sum allows us to avoid the issue while fields sum with the value null. as you already now the condition with the field u do not need xdoxslt

  is - enough try this

  you are able to get a preview of the template with the code of the sum.

  Send me your model and xml. I can try at my side
  E-mail: [email protected]

• Satellite U840W - replacement SSD with current hybrid HARD drive

  I have this model U840W with a hybrid HARD drive (500 GB + 32 GB SSD cache), I would like to replace it with an mSATA SSD. My warranty is left about 2 months... I understand that if I open the bottom cover, the guarantee may be cancelled.

  Read the following thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68779

  What I don't understand is the "live in the mid under foot rubber", what is the best way to remove it? This seems to be the real challenge. A directive (preferably with photos)?

  Thanks in adv!

  Hello

  I wouldn't recommend allows you to replace the hybrid HARD drive on your own even if hand warranty isn't valid anymore.
  Why?
  Because the after replacing a drive HARD or SSD, RAID and TSRI (quick start of Intel technology) mode will not be available.

  To rebuild the factory RAID mode and allow the TSRI, special tools are needed and this can be done by the authorized Toshiba maintainer.

  So even if you would be able to remove the bottom cover and hybrids of HARD drive, the new inserted SSD would not be able to achieve the best performance.