Replace the bookmarks with bookmarks Safai

Similar Questions

• I need to replace the bookmarks on my 2nd computer with those of my main computer.

  Original title: replace bookmarks

  I need to replace the bookmarks on my 2nd computer with those of my main computer.  How can I remove those on the 2nd without having to remove a folder at a time.  If I don't have and I install the bookmarks of the computer main I get two sets of records on computer 2.

  Don Jacobs

  Thank you for your resjponse.  Sorry about the omission of browser.  I use IE 8.  I don't know about the sequence of import and export.  I need to know, what I can erase the bookmark.htm file before I import without which performs the import just puts a second series of folders on the laptop...

  Don. I guess that I'm missing something here because I do not understand what it is you are trying to say.

  First of all, let's say that computer 1 to the desired favorites. Computer 2 is where you add the Favorites. Go to the computer 1 and save (export) your Favorites. Go to computer 2. Remove all Favorites (C:\Users\Owner\Favorites.. Please be advised that your path may vary). Now on computer 2, click on the ' import '. Navigate to the file htm to computer 1. Your Favorites from computer 1 are now in place.

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• How to replace the paragraph with a space mark

  Hello

  I received the contents of a manual in raster format, but each line of text ends with a paragraph mark. How to replace the paragraph with a mark space otherwise than by hand?

  In Word, this is pretty easy, but I don't see not any provision for it in the search box on 7.2 Frame.

  Yours,

  Michael F

  ========

  \p = end of paragraph

  \P = beginning of paragraph

  See: Help > keyboard shortcuts > keys for the search and replace

• Replace the hyphen with line break

  Hello
  In my application, I want to replace the hyphen with line break
  . I use APEX4.0
  I use the following javascript code:
  
  < html >
  < script type = "text/javascript" >
  function test().
  {
  var visitorName = "< br / > ';
  var myOldString = "& P2_SI.";
  var myNewString = myOldString.replace (/-/ g, visitorName);
  }
  < /script >
  < / html >
  
  I have no idea how the get executed and make javascript work... can anyone help?

  Suzi,

  I changed the code for page 1:
  I don't know that is what you want, but it works :)
  That's what I did

  1. deleted tags
  2 P1_RESULTS element created to keep results
  3. $x_Value ("P1_RESULTS", myNewString) occasion; to fill a new element

  You cannot set the value P1_S2I in dynamic Action (onchange) - it looks like the code calls herself and kills the browser

  Lev

  Published by: the on August 27, 2010 11:49

  Published by: the on August 27, 2010 11:53

• replace the characters with accent with their basic letter

  Hello
  
  I need to replace the characters with an accent with their basic letter
  
  a = > has
  n = > n
  
  I use classes of equivalence as [[= n =]] in regexp_replace, but then I need to call it for each letter. Is there a simpler way?
  
  Concerning
  Marcus

  Given that I only have the names to convert INITCAP

  It seems that you can use the binary case-insensitive or accent sorting to get the results you want so:

  SQL> with t as (
   select 'ñÉäßÑéàâ' str from dual
  )
  --
  --
  select str, utl_raw.cast_to_varchar2((nlssort(str, 'nls_sort=binary_ai'))) str2 from t
  /
  STR      STR2
  -------- ---------------
  ñÉäßÑéàâ neassneaa
  1 row selected.
  

• Replace the spaces with a sign +.

  Hello
  
  On of my items, I have a text... I want to replace the spaces with a plus (+) sign... something linke this
  
  
  Select
  text_field,
  Function_replace (text_field, "", "+") new_field
  Of
  table_A

  Like this?

  select regexp_replace('Please replace, me','[ ,-]+','+') replaced_txt from dual;
  
  REPLACED_TXT
  -----------------
  Please+replace+me
  
  Elapsed: 00:00:00.00
  

  HTH,
  Prazy

• Import bookmarks from another computer firefox file will add to or replace the bookmarks firefox on the receiving computer?

  I know this has been asked before but similar issues has been shown to me before were over a year old and the users were still on v3.n and since we are now on v16.n I thought I should probably ask just in case anything has changed. It seems that if I use a bookmarks HTML file then must be added instead to crush the bookmarks on the destination computer. Is this always the case? Thank you.

  Import of bookmarks in a HTML file will merge bookmarks in HTML file in your existing bookmarks; you lose nothing, but it may result in bookmarks double if even the bookmark is already in your bookmarks and is also in the HTML file.

  The restoration of a JSON file bookmarks won't replace your existing bookmarks.

  See - http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox#Difference_between_restoring_and_importing_bookmarks

  Other - you should check and update your plugins

  1. Check the Plugins - https://www.mozilla.org/en-US/plugincheck/
  2. Shockwave Flash 11.4 r402
     • https://support.Mozilla.org/en-us/KB/install-Flash-plugin-view-videos-animations-games
     • https://support.Mozilla.org/en-us/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  3. Adobe Shockwave for Director Netscape plug-in, version 11.5 (not the same as Adobe Flash or Flash Player)
     • http://KB.mozillazine.org/Shockwave
     • Download, save, close all browsers, run the Setup program that you just download- https://get.adobe.com/shockwave/

• How can I move booksmark to another machine without replacing the bookmarks on the new machine, IE combine a number of bookmarks files

  I'll put up a laptop and you want to have all the bookmarks from my desktop machine to be moved there from different accounts, but in the end upward in a single file so that I don't have to have loads of separate accounts.

  You must export the Favorites to an HTML file and then import this file. For more details on this see bookmarks Firefox export to a HTML for backup or transfer Favorites and bookmarks to an HTML file import.

  If this is likely to create duplicate bookmarks, you can check for them and delete them using the add-on CheckPlaces .

  If you want to keep the bookmarks in the laptop and desktop in sync, you can use the add-on Firefox Sync . Firefox Sync will be integrated with Firefox 4.

• Measures of software right for remove mSata 32 GB drive cache to replace the HDD with SSD.

  Hi, does anyone have instructions, or so point me to an article, to remove the disc from cache mSata original 32 GB configured to speed up drive HARD etc so the office strictly from the HARD drive boot can drive alone. I know that this implies the RST and possibly the BIOS settings. I'm looking for the exact steps that I had bad experiences removal (and adding) 32 GB mSata led cache in the past. System does not boot... Note I didn't need no guidance on physically remove the disk and for the curious once I have a clean boot of the only HARD disk I will clone the SSD (2.5 which I already have) so the 32 GB mSata is redundant and I would remove it completely. I am also interested by your experiences and/or complications in doing this. Thank you.

  These instructions may be of any Dell desktop, the office in question is a Dell XPS 8700.

  Hi all

  Here are the exact steps I used to replace a HARD drive accelerated with an SSD without any problem. It will probably work on most laptops and Dell desktop computers. In my case a Dell XPS 8700 running Windows Pro 64-bit 10.

  1 rapid Storage Technology, performance-> Disable Acceleration tab-> makes available.

  2. use DISKPART to CLEAN the drive 32 GB mSata.

  3. run msconfig.exe to set the mode to boot without failure, a minimum.

  4 stop.

  5. press F2 at startup to enter BIOS. Change to AHCI RAID. (probably not necessary, but I wanted that you never know what SSD tools may need).

  6 mine starts in Mode safe very well and it has changed Windows 10 AHCI RAID drivers automatically.

  7 run msconfig.exe to change normal startup.

  8 re-boot (started fine normal start-up).

  9. I then stop and removed the 32 GB mSata reader (you probably do this stage 4)

  10 success, XPS 8700 AHCI HHD boots without any problem.

  11. I then used Acronis True Image HD provided for free with the 1050 GB Crucial SSD to clone the 2 TB drive (650 GB used). Important do not use Acronis in Windows mode but create and boot from a bootable USB key. Community.crucial.com/.../172487

  12 put the SSD in a basket of 3.5 and swapped the HHD with the SSD. Now, it starts in a few seconds and not minutes after a Windows 10 update!

  It worked for me, but obviously not guaranteed to work for you...

• How to replace the iPhone with iCloud contacts contacts

  I see a lot on the other hand... but I need help.  I spent hours on my reductive duplicates of MAC (2-3 each) and out Hung old addresses, etc..  I've narrowed my list of contacts from 1200 to 458.  Once I did, I have archived my new list of contacts "just in case."  When I go in iCloud on my computer, I see 458 contacts.  Large.  However, my iPad and iPhone are always a mess.  I thought that this was happening in iCloud would replace the junk on my devices.  I have read articles that said disable contacts in iCloud and it will ask you what you want to do with contacts - delete.  Yes, I did.  It has eliminated about 90 contacts and that's it.  Also, I went to all my e-mail and accounts disabled using contacts from gmail, yahoo, outlook etc.  Who does nothing either.

  Summary: What's in my account iCloud, 458 contacts, is correct.  Now, how the hell do I clean my iphone and ipad and load these 458 contacting them and get rid of the 1200-1500 in each device now?  Waaaah.   Very frustrating that there is not a global deletion that I can find.

  Please help a rookie.  MM

  Turn on the iCloud contacts for all devices

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• Model: G6-1D98DX, refurbished: renovated pavilion laptop g6, replace the fan with what?

  When I powered my laptop Pavilion G6 refurbished, it gives a disturbing message on the fan turns not and the processor of cooking and automacially stops in 15 seconds. OK, replace the fan.

  By the? appropriate? HP 'Maintenance and Service of Guide' (Doc PN 649111-002), I took part BUT Guide HP, the processor heat sink is held by 7 screws... only it renovated its heatsink is a model of 4 screws, and the motherboard was ever available for 7 screws.
  How to order the appropriate and/or fan-with-heat sink fan? the fan-with-heat sink seems to be a unit

  use data created on the fan or radiator Assembly to try to find a part on google or ebay.

  http://www.eBay.com/ITM/new-OEM-HP-Pavilion-G6-G6-1000-series-cooling-fan-with-heatsink-641024-001-4-pin-/251637960612?hash=item3a96ca8fa4:g:dTsAAOSwq5lTmneN