Replace the link display the basket with an image

Similar Questions

• Replace the film with Jpeg to end

  Hello

  I have a simple animation in flash on a Web page.

  At the end of the film, I would like the player to disappear and be replaced by an image.

  For example, imagine clicking on play and watch a movie on Disney, and then when the film ends the player are replaced by an image that is a good one to use at Disney.

  Ideas or direction would be greatly appreciated.

  Thank you for your time,

  Tim

  Put the image and the link in flash or use getURL() or navigateToURL() to post a link to a page with your image/link html.

• Replace the spaces with a sign +.

  Hello
  
  On of my items, I have a text... I want to replace the spaces with a plus (+) sign... something linke this
  
  
  Select
  text_field,
  Function_replace (text_field, "", "+") new_field
  Of
  table_A

  Like this?

  select regexp_replace('Please replace, me','[ ,-]+','+') replaced_txt from dual;
  
  REPLACED_TXT
  -----------------
  Please+replace+me
  
  Elapsed: 00:00:00.00
  

  HTH,
  Prazy

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• How to replace the paragraph with a space mark

  Hello

  I received the contents of a manual in raster format, but each line of text ends with a paragraph mark. How to replace the paragraph with a mark space otherwise than by hand?

  In Word, this is pretty easy, but I don't see not any provision for it in the search box on 7.2 Frame.

  Yours,

  Michael F

  ========

  \p = end of paragraph

  \P = beginning of paragraph

  See: Help > keyboard shortcuts > keys for the search and replace

• Replace the hyphen with line break

  Hello
  In my application, I want to replace the hyphen with line break
  . I use APEX4.0
  I use the following javascript code:
  
  < html >
  < script type = "text/javascript" >
  function test().
  {
  var visitorName = "< br / > ';
  var myOldString = "& P2_SI.";
  var myNewString = myOldString.replace (/-/ g, visitorName);
  }
  < /script >
  < / html >
  
  I have no idea how the get executed and make javascript work... can anyone help?

  Suzi,

  I changed the code for page 1:
  I don't know that is what you want, but it works :)
  That's what I did

  1. deleted tags
  2 P1_RESULTS element created to keep results
  3. $x_Value ("P1_RESULTS", myNewString) occasion; to fill a new element

  You cannot set the value P1_S2I in dynamic Action (onchange) - it looks like the code calls herself and kills the browser

  Lev

  Published by: the on August 27, 2010 11:49

  Published by: the on August 27, 2010 11:53

• replace the characters with accent with their basic letter

  Hello
  
  I need to replace the characters with an accent with their basic letter
  
  a = > has
  n = > n
  
  I use classes of equivalence as [[= n =]] in regexp_replace, but then I need to call it for each letter. Is there a simpler way?
  
  Concerning
  Marcus

  Given that I only have the names to convert INITCAP

  It seems that you can use the binary case-insensitive or accent sorting to get the results you want so:

  SQL> with t as (
   select 'ñÉäßÑéàâ' str from dual
  )
  --
  --
  select str, utl_raw.cast_to_varchar2((nlssort(str, 'nls_sort=binary_ai'))) str2 from t
  /
  STR      STR2
  -------- ---------------
  ñÉäßÑéàâ neassneaa
  1 row selected.
  

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• is it possible to replace the wifi with another card?

  Hello

  I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.

  problem is that mac os is not detecting the 5100 series of wifi card and I would like to know if it is possible to replace the current model 5100 with an old series?

  Is there any Center of service authorized in Uppsala in Sweden / Sweden for this?

  Thank you

  Limited wireless cards Lenovo Lenovo units certified to work with the brand machine. This is done through a white list in the system BIOS. Recently, I disassembled the last BIOS of T500/W500 (version 3.14 - 1: 06) and discovered the following picture of the white list. It's raw hex big endian joined with what I found by searching for the device ID's are redundant entries to change supplier codes.

  86803 B 428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] network connection

  86803D 428680111200 Corporation Intel WiMAX/WiFi Link 5150

  868036428680111000 Intel Corporation ultimate N WiFi Link 5300

  868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  8C161C008C16350000 Atheros AR5007EG

  EC107281EC1020E000 Realtek RTL8191SEvB (yuck, Realtek!) I wouldn't want one of these...)

  86803 8086:423D 428680161200 Corporation Intel WiMAX/WiFi Link 5150 D

  8680840086801513 corporation Intel Centrino Wireless-N 1000

  Your T400 comes from the same range and has probably the same list. Don't forget, you can buy a Lenovo brand unit.

  Also look for a PM with additional information.

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• Measures of software right for remove mSata 32 GB drive cache to replace the HDD with SSD.

  Hi, does anyone have instructions, or so point me to an article, to remove the disc from cache mSata original 32 GB configured to speed up drive HARD etc so the office strictly from the HARD drive boot can drive alone. I know that this implies the RST and possibly the BIOS settings. I'm looking for the exact steps that I had bad experiences removal (and adding) 32 GB mSata led cache in the past. System does not boot... Note I didn't need no guidance on physically remove the disk and for the curious once I have a clean boot of the only HARD disk I will clone the SSD (2.5 which I already have) so the 32 GB mSata is redundant and I would remove it completely. I am also interested by your experiences and/or complications in doing this. Thank you.

  These instructions may be of any Dell desktop, the office in question is a Dell XPS 8700.

  Hi all

  Here are the exact steps I used to replace a HARD drive accelerated with an SSD without any problem. It will probably work on most laptops and Dell desktop computers. In my case a Dell XPS 8700 running Windows Pro 64-bit 10.

  1 rapid Storage Technology, performance-> Disable Acceleration tab-> makes available.

  2. use DISKPART to CLEAN the drive 32 GB mSata.

  3. run msconfig.exe to set the mode to boot without failure, a minimum.

  4 stop.

  5. press F2 at startup to enter BIOS. Change to AHCI RAID. (probably not necessary, but I wanted that you never know what SSD tools may need).

  6 mine starts in Mode safe very well and it has changed Windows 10 AHCI RAID drivers automatically.

  7 run msconfig.exe to change normal startup.

  8 re-boot (started fine normal start-up).

  9. I then stop and removed the 32 GB mSata reader (you probably do this stage 4)

  10 success, XPS 8700 AHCI HHD boots without any problem.

  11. I then used Acronis True Image HD provided for free with the 1050 GB Crucial SSD to clone the 2 TB drive (650 GB used). Important do not use Acronis in Windows mode but create and boot from a bootable USB key. Community.crucial.com/.../172487

  12 put the SSD in a basket of 3.5 and swapped the HHD with the SSD. Now, it starts in a few seconds and not minutes after a Windows 10 update!

  It worked for me, but obviously not guaranteed to work for you...

• How to replace the HDD with SSD for Inspiron 15R 5521?

  Hello

  I have the Dell Inspiron 15R 5521 Intel i7 with Windows 8 is installed. I would like to replace the hard drive with the Samsung SSD 840 EVO series.

  http://www.Amazon.com/Samsung-Electronics-Evo-Series-2-5-inch-MZ-7TE1T0BW/DP/B00E3W16OU/ref=cm_cd_al_qh_dp_t

  First of all, this SSD will be compatible with my laptop? Second, I don't know how to install the Windows 8 and all the necessary drivers for this laptop works again.

  I have very little knowledge of operating system installation. Can someone help me with step by step instructions please?

  Thank you.

  Hi Daniel Hong,.

  This drive should work fine. I have a link below an operating system for your reference installation guide.

• How to replace the iPhone with iCloud contacts contacts

  I see a lot on the other hand... but I need help.  I spent hours on my reductive duplicates of MAC (2-3 each) and out Hung old addresses, etc..  I've narrowed my list of contacts from 1200 to 458.  Once I did, I have archived my new list of contacts "just in case."  When I go in iCloud on my computer, I see 458 contacts.  Large.  However, my iPad and iPhone are always a mess.  I thought that this was happening in iCloud would replace the junk on my devices.  I have read articles that said disable contacts in iCloud and it will ask you what you want to do with contacts - delete.  Yes, I did.  It has eliminated about 90 contacts and that's it.  Also, I went to all my e-mail and accounts disabled using contacts from gmail, yahoo, outlook etc.  Who does nothing either.

  Summary: What's in my account iCloud, 458 contacts, is correct.  Now, how the hell do I clean my iphone and ipad and load these 458 contacting them and get rid of the 1200-1500 in each device now?  Waaaah.   Very frustrating that there is not a global deletion that I can find.

  Please help a rookie.  MM

  Turn on the iCloud contacts for all devices