Replace the message in edit mode does not delete it

Similar Questions

• Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disk is write protected

  original title: write protection

  Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disc is write protected is displayed. What I can do to undo the write protection?

  Try this
  Go to disk management in administrative tools of the control by just one panel right click on the icon my computer on the desktop and select manage and then try to format your USB

  OR

  Try this
  http://www.ehow.com/how_5187399_format-write-protected-disk.html

• My computer just watched run so slow & then the message continues to come does not, I use Vista Home Premium 32 bit on a Sony VAIO

  This just started about 2 weeks ago and it starts as soon as I opened my browser and it does matter not what browser I use. I have also a lot of page up latch and do ctrl alt del out of there because it crashes my cursor and we can do it all. I ran Microsoft Security Essentials to search for viruses and it came back clear, I did a disk cleanup and I cleaned my computer with a program I have and none of it helped. So if someone has something they know who can help, I would be very grateful.

  Hello

  No security program finds all so do a thorough check of the malware.

  You say you "cleaned up my computer with a program I have.

  We recommend that you use that you use a registry or a program of cleaning/TuneUP/utilities, because they can do more harm to your any good operating system that they claim to be able to do.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• The name of the file in offline mode does not appear.

  For a while after the first pro start, it shows me the message that I currently have out material, but it shows me what material is in offline mode. The name of the file does not appear. Does anyone know why? I always start the project and then find the file that it was.

  I work with CS 6 and OS X 10.11.

  Open the display of metadata and properties in offline mode to find easily in the project window.

• When stopping down to the EXP get the message "rundll.exe program does not ' and computer does not turn off. How should I do?

  Can't stop it to exit the mode and get the data message may not be saved.

  Hello

  Windows operating system you are using?

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For reference:

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Let us know if that helps.

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• Value of the element after replacing the automated process of line does not?

  Greetings!

  I have a standard process of line automated filling in the fields on my current form after the header. Certain values that I need to replace by calculations from the data in other tables. If right after the line, I inserted another process for this. The results are actually stored in the database, but does not reach the customer. Why? Somehow it seems, once the line is completed, the html elements are not affected more during the processing of the page.

  So I resolved to set certain values with a call ajax after the page is loaded, but which actually is not the best way to do this.

  In coordination with the question: what is the difference between the headings of before and after? I looked in the documentation, but wrong in details. Myself I havn't found no difference between the two.

  I hope you can help me get clarity on who and how to implement the calculation as well as the shape of line.

  Thanks a lot and best regards,

  Tobi

  Hi TobiP,

  If your item has as the Type of Source database column, and I think you do since your using an automatic process of line Fetch, in the properties of the element, you'll find a region called 'Source '. If the Source value or expression is not null and the Source is set to "Always replace the value that exists in the session state", then the value of the source will be taken from what you put as the source and ignore session state values defined by other processes. Assign to this "only when there is zero current value in session state" to use the session as a source value.

  Kind regards

  Joni

• Replacing the hard drive T60 - Windows does not recognize the hard drive

  Hello all, new to the community of Lenovo. I have a T60, but also the latest Lenovo Edge. HD crashed on the T60 and it will boot is no longer. I just bought a 500 GB WD without doing a lot of research. When trying to install Windows 7 (I had already updated the T60) it will not recognize the new drive - Windows does not drive at all. Is there a way to get the Lenovo to recognize the WD drive? Thanks in advance for any help.

  Looks like you're doing something wrong, if the drive is a SATA it should work, install it and boot from your windows installation DVD and it will be the installation drive and shaped for you, or you can optionally set the partitions manually when you are prompted to do so. If you try to do something unusual such as transfer windows on the old drive then you will need to explain exactly what you did because I see no reason it should not work. Infact I did it several times myself.

• Vista start not only restored at the factory and safe mode does not work

  Hello

  I have experience blackheads on the dell splash screen, then it continues to the f1 f2 to Setup because I don't have a floppy drive, it is okay to continue. On this screen but I have blue dashes experience everywhere in this moving around every 20 seconds or more. When I hit f1 I get a low quality graphics Windows load bar and then a black screen after 5 to 10 seconds. Followed by a blue screen of death with the code 0x0000008e. Then restart. I then tried the F8 key and restored in a last known point that worked, does not solve my problem. Tried to boot in SafeMode (normal) and I get the blue wheel scrolling as it's almost here, and then a reboot without explanation. Also, I tried to move the cards gfx and switching of slot machines, this is not having an effect. But I noticed when using a card, I get a quick 5 beep at startup, then using the other card it works fine. Is a card? This would have an effect on my boot because of the missing material? Help, please!
  Data sheet:
  Dell XPS 630i
  Quad Core - 2.4 ghz
  4 GB RAM
  Dual Nvidia 9800gt
  I have known 3 hard disks
  Windows Vista 32-bit sp1

  Hello

  Looks like a graphic problem

  beep codes are normally related material

  read below

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

• Replaced the HDD with SSD and does not start?

  I replaced the original HARD drive in my Latitude E5500 with a new 240 GB SSD. I can't the computer to boot. Blue lights above the blink of keyboard on and out and nothing else happens. Is there a sequence of keys that need to be pushed? I have the boot CD in the DVD player, but can't even get it to work.

  Is there a place to find written instructions?

  Thank you.

  Hi ran61a,

  Click here to find out what you say the flashing lights.

• Cannot get rid of the message of paper jam. Not delete or print from computer. Print manually.

  I have an old all in a 1200 Series printer that I have attached to my new laptop, Microsoft Pro 3 Surface.  It was working OK, but now I have a message of paper jam that will not disappear.  What can I do?

  Thank you very much help to return so soon!  What I did to restore my computer to an earlier time, and it worked!  The printer works and now is not an error of "Paper Jam."  Thanks again.

• Do not replace the motherboard, XP installation CD does not start even

  First: I am a complete Windows user no, I program and works exclusively with Linux, so I have little experience with issues licenses and the WGA behavior.  This is probably going to be long, and I apologize.

  The computer of my mother, about 7 years old with less than 500 MB of memory reported and a 1 GHz AMD x86_64 processor, took too long to do something, and I could hear the beating of disc on almost any operation, so at Christmas, I suggested that she order some upgraded hardware.  I checked with her that she had the original installation media, used by the person who set up your computer, and then we ordered a new combination of mother/CPU card and 4 GB of memory.  The new processor is always x86_64 and has an EIDE interface.  The IDE HDD is the master on the IDE one bus, and the CD/DVD device is the slave.

  I followed the instructions to the: http://support.microsoft.com/kb/824125

  The first thing that happened is that he told me that this installation media is older than the installed operating system, so it would not be able to perform the 'upgrade', only a new resettlement, which clearly, we do not do so because all the data from my mother is on the single partition on this IDE drive it.  Is it because that is not the original installation disc, or it means that something (perhaps a network-downloaded 'service pack'?) changed software installed to the point that the original install CD doesn't know what to do?  If this is the last, means that install CD are useful that as long as no significant changes are made to the system?

  So, then, I decided to Exchange material anyway and see what happened.  I removed the old motherboard and put in the new, hung the Ribbon IDE and started.  The machine went into a loop of reboot by which it would ISSUE, begin to read the hard disk, flash may be a bit of a boot image from Windows (a fraction of a second, in fact less than a cycle of vertical refresh complete as part of the screen should be painted before disappearing), then a bluescreen with multiple lines of text appeared for a fraction of a second then it should reboot again.  My father suggested sitting in front of it with a camera and try to photograph the text screen so that we can read, but that seemed likely to end in frustration.

  Then, I tried starting the original installation, CD, based on the assumption that I could follow the second set of instructions in this page of Microsoft above and pretend the old motherboard had not experienced a catastrophic without any possibility of preparation failure.  The installation CD, a disc with a holographic surface that is called 'Windows XP Home Edition' and includes the number of '2002' on the face, could not start exactly the same way (the display text could have been different, as both were illegible, but it was about the same amount of text and blinked on the screen in the same a short way until the computer resets).

  I thought that maybe the power supply was insufficient for the new machine, so I tested the material with a Linux boot CD, which started perfectly.  Now, the Linux CD was burned in 2008, not in 2002, it has the advantage of having been written with new hardware platforms in mind.

  I now swapped the old motherboard, and start-up of the computer again to the old, slow down the behavior.  I told her that I have no way to proceed, and that she would have to take all the pieces to a specialist in Windows to do things again.  I have the opportunity to make another attempt in a week, if anyone can tell me how to do this job.

  So, what could I do, or ask him to do, to solve this problem ourselves?  Is it possible to create a CD that can be used to upgrade the old motherboard to the new?  I understand that Windows XP is no longer supported, so I fear that a registered technician may be contractually forbidden to get the job of the computer.  I don't want to put an end to the removal of all of its installed software or lose its settings, bookmarks WWW and so on.

  If I do a fresh install of something, I think that perhaps it would be better just to go in a different way.  I could install Linux on the machine, then set up a KVM virtual machine and install Windows XP in this.  No doubt the virtual material presented by KVM is generic enough that the old CD would be happy to install it, and it would give the advantage of being able to point its Windows State control so that she could always relax while problems due to infections by malicious software or a sloppy software upgrade/installation.  However, I don't know the legality of it.  My mom had a Windows XP computer and this procedure would end with always have a Windows XP computer, but I think that this could still be banned.

  This is the story.  Thanks for the solutions, or some clarification of misconceptions that I could express my very limited experience with Windows-based.

  EDIT: the replacement motherboard is this one: http://www.newegg.ca/Product/Product.aspx?Item=N82E16813138195

  With more that 3 GB of physical RAM installed may or likely to cause a condition of bluescreen when you try to install or repair Windows XP.  It would be wise to limit the amount of installed RAM 3 GB or 2 GB.

  Additional information:

  Support of memory and Windows operating systems

  How to perform a repair of Windows XP installation

  Change a motherboard or moving a hard drive with XP installed

  Carey Frisch

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• The 'Search' under Edit function does not work. I can enter a search word, but nothing is selected, even if the word is on the wepage.

  I can open the function "Search" under Edit and enter a search word, but nothing has been highlighted, even if I see that the search word IS in the text on the website.

  How can I make this work again (he did until recently)?

  Firefox 3.6.17 on Windows XP SP3

  You have good match case selected in the search bar?

• Tracking of movement on the first 10 elements mode does not work.

  I am trying to attach the words of a moving object in first 10 elements. I already follow an object and has an orange box around him that travels with the object. Now I want to join him the words, but when I drag a title on the box, nothing happens. I managed once before with this, and it seems that you need to get the box orange to be blue by clicking on it in a certain way. However, I was not able to get this box to be blue, so I can't join him words.

  Thank you!

  As I said, this feature may or may not work with these images.