Windows XP hangs at the splash screen, safe mode does not work either

Similar Questions

• Vista start not only restored at the factory and safe mode does not work

  Hello

  I have experience blackheads on the dell splash screen, then it continues to the f1 f2 to Setup because I don't have a floppy drive, it is okay to continue. On this screen but I have blue dashes experience everywhere in this moving around every 20 seconds or more. When I hit f1 I get a low quality graphics Windows load bar and then a black screen after 5 to 10 seconds. Followed by a blue screen of death with the code 0x0000008e. Then restart. I then tried the F8 key and restored in a last known point that worked, does not solve my problem. Tried to boot in SafeMode (normal) and I get the blue wheel scrolling as it's almost here, and then a reboot without explanation. Also, I tried to move the cards gfx and switching of slot machines, this is not having an effect. But I noticed when using a card, I get a quick 5 beep at startup, then using the other card it works fine. Is a card? This would have an effect on my boot because of the missing material? Help, please!
  Data sheet:
  Dell XPS 630i
  Quad Core - 2.4 ghz
  4 GB RAM
  Dual Nvidia 9800gt
  I have known 3 hard disks
  Windows Vista 32-bit sp1

  Hello

  Looks like a graphic problem

  beep codes are normally related material

  read below

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• I hae a Trogan Virus to also keep a large number of viruses, too... from Windows Security Alert. The Microsoft malicious software tool does not work on Vista 64. I need another product.

  I wouldn't not viruses. I ran scans all time th. My Windows Security Alert was for a few hours and I can't ge to do anything. He keeps asking me to run the installation and then refuses, saying that all ready I have. I ran about three virs scan as this has been posted yet and I didn't have a virus. He said that maybe it's a thing.

  I tried to run th malicious Malware tool, just in case the virus were real, but he came upward and sad for a Vista 64 bit it was not compatible and I need another product. Is this one?

  E-mail address is removed from the privacy *.

  Judging strictly from your post it looks like you have too many malware scanners installed which can decrease your overall protection in the end.

  No matter what scanners you used, please follow the instructions below. Reply back with the results and include a list of all malware/antivirus scanners software that are currently installed on your computer.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose whether to remove anything found. Once completed click HERE and download Superantispyware Portable. Perform a quick scan again remove anything found.

• Applications Windows 8 not opening not and windows store hangs on the splash screen

  Basically, none of the applications opens and when I click on the store it will open the screen green spash and then crash.

  I used the troubleshooter of app windows 8, which he says he has solved the problem and asks me to restart, which I do and the apps don't always work.
  I deleted all my recent programs, but this has not fixed it.
  I have now uninstalled my antivirus and firewall, but they still do not work
  Could someone help me solve this problem?
  Thank you

  Hi Tom,

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand from the description of the issue, that the store Windows and applications do not work on your computer Windows 8.

  1. do you receive an error message when you try to launch applications?
  2. is it works much earlier?
  3. using a proxy connection?

  Here are a few methods, we can try that these measures could help set the question of the application.

  Method 1: Please change the resolution and check if that helps.

  a. press Windows + x, click or tap command prompt (Administrator).
  b. navigate to the command prompt, type desk.cpl.
  c. Please change the resolution of the screen 1366 * 768.

  Method 2:

  
  Since you aren't able to access the Windows store I suggest you turn off the proxy connection, and check again.

  a. click the gear box in the upper right corner in internet explore.
  b. click on tools and then click Internet Options.
  c. click on the Connections tab, then click LAN settings.
  d. Select the use a proxy server for your LAN check box.
  e. in the address box, type the address of the proxy server.
  f. in the Port box, type the port number.

  Method 3:
  

  I suggest you to reset the cache to store and check if you are able to open the store.

  To do:
  a. press the Windows key + R
  b. Type wsreset.exe and press to enter.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Blue screen on reboot. Safe mode does not work...

  When I try to start my computer, it displays a blue screen, no matter what I boot (hard disk, safemode, Recovery Manager). It still crashes and I get this message:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error message. Restart your computer. If this screen appears again. Follow these steps:

  Check to make sure any new hardware or software is installed correctly. If this is a new installation ask your hardware manufacturer or software of windows updates you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as the capture or the shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000C1F5 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000).

  I was using automatic updates.  Shut down the computer after the installation of updates and I have had this problem since.

  Hello

  You can try these fixes in XP, they could be the same and I have more a XP machine to test it on.

  XP experts:

  -Meets - even if this can help you to XP back here, it seems
  http://answers.Microsoft.com/en-us/Windows/ee318395.aspx

  Discussions at the Microsoft.public.windowsxp.general
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General&cat=en_us_0cc55ed7-e23e-4264-97e8-eb7d5a162b12&lang=en&CR=us

  Google search on the error in Windows XP
  http://www.Google.com/search?hl=en&q=Windows+XP+0x0000C1F5&LR=lang_en&AQ=f&OQ=&AQI
  Search the Knowledge Base Microsoft on error in Windows XP
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000C1F5&spid=1173&catalog=LCID%3D1033&1033comm=1&Res=20

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I want to use the print SCREEN key, but does not work.

  Using Vista, I want to activate my key on my keyboard screenshot to capture what I have on my screen at the same time.  When I press it, nothing happens.  Is there something that I need to program to operate?

  You must stick somewhere after you press the button.

  http://www.SeoConsultants.com/Windows/print-screen/

  Often abbreviated Prt Scr, print screen key is a useful key supported by most of the PC. On the BACK, by pressing the print screen key causes the computer to send some images and text are currently on the screen to the printer. Some graphics programs and Windows, use the print screen button to get screenshots.

  Now, how to see the screenshots or maybe even send them to someone? The fastest and most effective method is to have a practical graphic editing program. If this isn't an option, you can open your favorite word processing program and create a new document. Place your cursorat the beginning of the document, or wherever you want the screenshot to appear.

  Using your keyboard, press Ctrl + V which will Paste the screenshot in your open document

  http://graphicssoft.about.com/cs/General/HT/winscreenshot.htm

  How to capture a screenshot of your desktop or window Active in Windows

  http://www.ibiblio.org/virtualcell/Tutor1/TandR/PrtScr.html

  http://www.ehow.com/how_4682072_use-print-screen-laptop.html

  How to use the print on your laptop screen

  See you soon.

  Mick Murphy - Microsoft partner

• Aid (BSoD) safe mode does not work

  Hello

  I have an old PC with the blue screen of death and safe mode won't help how can I get through it?

  Hello

  Please go to the Microsoft Community Forums.
  From the description of the question, we understand that you get error blue screen of death on the computer.
  Let me go ahead and help you with the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. What is the full error message?
  2. don't you make changes to the computer before the show?
  3. What is the brand and model of the computer?
  4. which version of the operating system is installed on the computer?
   
  If you use Windows 7, follow the steps in the article, and the check.
  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  Note: When you restore your computer from a system image, the contents of your hard drive is replaced by the content of the image of the system. This means that any changes you made, you have it installed, or you saved after the creation of the image of the file system will be probably lost, unless you have a recent backup of your data.
  Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.
   
  Hope this solves the problem. If the problem persists, please email us with the exact details of the question and the answers to the questions above so that we can better help you.

• the spell checker button is dimmed and the fate that you write does not work either. I'll have to use microsoft word, then copy / paste.

  See the question

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

• Tracking of movement on the first 10 elements mode does not work.

  I am trying to attach the words of a moving object in first 10 elements. I already follow an object and has an orange box around him that travels with the object. Now I want to join him the words, but when I drag a title on the box, nothing happens. I managed once before with this, and it seems that you need to get the box orange to be blue by clicking on it in a certain way. However, I was not able to get this box to be blue, so I can't join him words.

  Thank you!

  As I said, this feature may or may not work with these images.

• the poster of the Bookmarks window is too big (suddenly occurred with the new version). I can't figure out how to get the smaller screen. Zoom does not work on the display of the menu bookmark.

  I have the 4 version, just download and a Mac OS 10.6. w. 7.
  Display the bookmarks (when I pull to the low "bookmarks") is far too broad. I can't understand how to reduce the display size. The window is not persistent, so I can't yet get you a screenshot.
  Thank you, Sara

  It seems that there is a change in Firefox 4, where the width of the drop-down list is now determined by the length of the longest bookmark name in the displayed folder. Versions previous of Firefox would be to shorten a long name like this and add an ellipsis to indicate the name has been truncated.

  Sorry, I don't know how to change it otherwise that you advise to change the name of this long bookmark name and make it less wordy. Just scroll to the bottom of the list of bookmarks in this vast folder until see you the culprit, then right click on that bookmark and open properties and change the line of name at the top of this dialog box.

• Windows 8.1 on the function Fn + Z510 keys does not work and I see no Lenovo so that they work again

  This computer came with FreeDos and I had to buy a windows at retail, so it was not a custom set for the laptop and when I page driver Lenovo for Z510, the only touch pad driver and keyboard page is the touchpad drivers.

  Nothing for the keyboard.

  So what don't understand me? Where can I go to activate the additional function keys?

  Furthermore, I checked in the BIOS and access keys is enabled.

  Apparently, I had a problem of motherboard and its now fixed thanks to the repair center, that I went.

• RAW files will not open of d610 in cs6 once installation on new laptop need the .dng 8.3 update does not work either

  I installed cs6 on a new computer, but I can not open my raw even files with the dng converter have the 8.3 update raw file?  You pay over $ 600 for a program, it looks that the software company would keep all updates online.  Is that I can copy the folders on my another computer in the folder of adobe on the new cs6?

  You don't need the DNG Converter. CS6 is compatible with Camera Raw up to version 9.1.1 (the latest version with CS6 is compatible).

  Update Camera Raw to 9.1.1 via help > updates in Photoshop or download the 9.1.1 zip file of

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  Once you have completed the installation 9.1.1, you will be able to open files Raw D610 in CS6.

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.