replace the original shape

Similar Questions

• Text editor ' Save as... '. "broken - replaces the original file as well

  ' Save as... '. "removed some sort items of menu standards a long time ago, but I used this http://osxdaily.com/2012/08/27/enable-save-as-os-x-mountain-lion/ to restore a just as long. This addition of shortcut recently stopped working properly. Creates the new file, it also replaces the original file. Good OOP...

  I removed the keyboard shortcut and discovered that if I open the file menu, hold the Option key to activate twice in save Sub... than that STILL not work correctly. It seems something within the modified OS and buggered how to save under... anything works.

  Does anyone know how to save under... work again? Please do not respond if your answer is to use two copies. This isn't an answer as duplicate is a replacement of several wrong step of the simple and easy as... backup function.

  OS X El Capitan: save documents

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• Replace the original audio track

  I imported a movie like asset for Premiere Pro and created clips in a sequence of it. Several parts of the original film are in different places on the timeline, they are trimmed etc...

  When the video is almost over, I realized that the original contained in the original film audio is incorrect and I replace it with another audio file, which is of length the same and already imported into the project. But I don't see an option to replace the audio source to an audio track.

  I know it is possible to break the link video and audio, but this does not solve the problem. Then right click on a single item (after having to separate, it's only an audio track of a clip) in the timeline and choosing Properties, path that points to the original movie file. I would change the file path so that it points to my new current audio file.

  Is it possible to do more than to remove all existing audio tracks in the timeline and create them from the beginning, using the new audio asset as a source and do it manually any changes that were made to the original video?

  Well, you'll have to do the hard

  After you import your audio track of replacement, load it in the Source monitor. Then, by pressing the Alt + Shift key, drag the audio to one of your instances of clip with the sound 'bad '. Audio of the movie clip instance will be replaced (it's done Alt), and it will retain the same point (what's Shift). You will need to do this for each instance of a clip in the timeline; Unfortunately, you can not select them all and it in one pass - points in are not met then.

  The easy way would be to get a new copy of your original movie with replacement audio multiplex. All you have to do is then right click on the item in the project Panel, select replace sequences and navigate to the new replacement clip. The original main item will be replaced, and this will be running continuous down to all instances of the clip in the sequence of your project. If you can multiplex the original video with the audio again, it's the way to go (especially for a complicated editing); However, you said that you are using the video "m4u" (which I assume you meant "m4v") so this creates a little more difficult.

• I created a new administrator user account that has replaced the original one. Now I can not access my old files. What can I do?

  Windows XP Professional

  I found that will help you solve your problem, the original instructions have been written by Shenan Stanley   Posts: n/a

  Re: Main administrator account appearing not If you can connect with the new account that you created (which should be an administrator account as well) then go directly to step 2 below. I suppose that you use the administrator account as your main account (bad idea anyway) and that means that you probably have Windows XP Professional * and *. somehow enabled the guest account or create a new account - or installed some patches that created a new account - as .NET. I guess also that (since you say "appear") you also use the 'Welcome' screen opening of session instead of the classic logon. (1) restart the system. Press CTRL + ALT + DELETE twice on home screen. Type in "Administrator" (without the quotes) as the username and do not put in any password and logon. Work? (2) or follow the instructions below to add the administrator account of the Welcome screen * or * download/use TweakUI to choose that is visible on the screen of welcome and even set automatic logon if you want. How to add a user to the Welcome screen logon page: ------ 1. start regedit.exe (start--> RUN--> REGEDIT--> OK) 2. navigate to: HKEY_LOCAL_MACHINE NT\CurrentVersion\Winlogon\SpecialAccounts\UserLis t. 3. on the Edit menu, select new, DWORD value. 4. type administrator as the name, and then press ENTER. 5 double-click on the new value it the value 1 and click OK. 6. close the registry editor. The administrator account will now appear on the Welcome screen. You can use These same steps to control other accounts listed on the welcome screen. The value of the registry value to 1 to display an account or account 0 for hide an account. For example, to hide the user Bob account, add a value named "Bob" in the registry key identified in step 2, then set the value to 0. You can do the above with the Microsoft TweakUI PowerToy. http://www.Microsoft.com/windowsxp/d...PowerToys.mspx ------ Automatic logons: ------ Method of Microsoft: http://support.Microsoft.com/kb/315231 Method 2 of Microsoft: TweakUI for: http://www.Microsoft.com/windowsxp/d...PowerToys.mspx control userpasswords2 method: (1) go to the Start Menu and run the box. (2) type the following: Control userpasswords2 Now click on OK (3) in the new Windows that appears select the account you want to make the opening main session. Now, uncheck the box "users must enter a user name and password... ». (4) hit apply and a dialog box will appear asking you to confirm the selected user password. Click OK when you have finished... ------ I hope this gets you where you are wanting to be. It's a * good * thing in the field of the user to: (1) have strong passwords. (2) have more than one account to administrator (with strong passwords). I know - you are the "only one who lives there, the only person who uses your. computer'... etc. Large. When your House is burgled and computer

  
  stolen (physically or virtually)<- you="" may="" be="" thinking="">
  Another thing, like ' all my (the only person who lives here, the only person who).
  Use this computer) documents, pictures, e-mails, financial information, updated in cache
  Passwords, contacts, etc... are on this computer. »

  But it's an individual choice. You get to evaluate risk. =)

• replaced the original HD, PC guy has no partition, damaged BONES now, how do I reinstall the OS?

  Compaq Presario SR1511NX desktop PC

  Windows XP preinstalled, no software disc.

  I did all of the recovery disks, pc tools disk, over such implementation suggested by the Troubleshooting Guide.

  (A neighbor) PC Repair guy replaced the hard drive, it did not include a drive partitioned and first attempt (mirror) as he called it, the old drive with the OS on the replacement drive is not ended, he had to try a second time, he seems to be ok, but got progressively worse and recently acted as he hada virus or more , all scans were clean, and now every attempt to "fix" it killed instead. I tried the recovery disks, but wasn't smart enough to know that they would not work on a different hard drive. Can I wipe the hard drive and reinstall the XP operating system, all my files were backed up before the hard drive replacement. How to re - install OS with no disc?

  QUOTE: "I tried the recovery disks, but wasn't smart enough to know that they would not work on another hard drive."

  This is not true. But the hard disk must be the same size (GB) or more.

  How do you come to this conclusion?

  This link will guide you in the proper procedure with these discs

• What is the next step after the replacement of a hard drive corrupted/dead, I replaced the original HD.

  After realizing that my original on the G56 - 118 CA hard drive died, I bought a new 'Seagate' Momentus 320 G SATA 16 MB 7200 RPM drive.  However, after swapping, install the new disk and using the recovery disk, I create the purchase of the computer... still does not work.  What is my next step... Please help, I'm out of ideas, I copied the drivers on the HP site, but it does not help.  Anyone think of buying a HP recovery disk will do something?

  Hello

  If you are in the United States, click on the link below.

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  If you are in another part of the world, link below.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Replaced the original product key Windows 8 accidentally.

  Hi all

  I have a SONY VAIO laptop which came with pre-installed Windows 8. Yesterday I ran MS Toolkit Activator, just to help my friend to get a product key and accidentally removed my original and disabled product key my Windows 8.

  Now when I try to activate my Windows it says that Windows cannot be activated, KMS is not found.

  Is someone can you please tell me how can I reactivate my genuine Windows 8.

  Thank you and best regards,

  Rahul

  KMS server is for Volume licenses and is not resolved by the Activation of normal phone users at home.

  https://TechNet.Microsoft.com/en-us/library/ff793434.aspx

• A url in an e-mail message opens in the firefox window and then open a new (replacing the original window.

  Using Safari, when I click on a url in an e-mail message, it opens in a new window. Using Firefox, clicking on a url in an email replces the firefox window opened by a new one. I want that they open both.

  Is the email in Firefox and this page is accessing the linked page, or is the e-mail message in a separate program, and it launches the URL in the last active window of Firefox?

  If the problem is an external link, you can check your settings for the following preference:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste link.open and make a pause so that the list is filtered. Then look for that and if its value is not 2, change it to 2.

  Browser.Link.open_newwindow.override.external

  -1 = open_newwindow applies to external links (default)
  
  3 = open external links in a new tab
  
  2 = open external links in a new window
  
  1 = open external links in the active tab

  Edit: Probably a good idea to check this one, too, and set it to 2 or 3, as you prefer.

  Browser.Link.open_newwindow

  3 = divert new window into a new tab (by default) (checked *)
  
  2 = allow the link to open a new window (uncontrolled *)
  
  1 = new power window in the same tab

  * First check box in the Options > tabs (on Mac, preferences > tabs)

• Is it possible to replace the original keyboard Aspire 572 E1 with a backlit (illuminated) a?

  I have a laptop of E1 - 572 as my main and most of the time, I use it with grey environments clear configured. In order to have a keyboard backlit would be nice.

  Is any E1-572 support backlit keyboards available?

  Not a chance.

• HP laptop G71 - 340US SSD instead of the Original HARD disk replacement

  Looking for a replacement for an original HDD SSD in a laptop HP G71-340US.

  I am told that the interface in this laptop is a 3.0 GB/S (SATA II).

  What I am curious to know is whether or not improving impact of performance will be probably quite noticeable to replace the original HDD (standard) w/a SSD.  Just try to spend my money.

  Thanks in advance.

  Hello

  You can see a different big during startup and shutdown. Time to open programs will be shorter, and if you use applications that do a lot of entries, you can also see you machine runs faster.

  I hope this helps.

• Replacing the drive system of IQ770

  My IQ770 system disk is defective and must be replaced.

  Anyone know where I can find details on replacing this drive?

  Easy,.

  Take a SATA on your preferred provider. 30 GB - 10 000 tb

  Example of 500 GB = £30

  Better yet to catch one in a basket, then you get a caddy for an extra 10 or 15 dollars.

  But 3.5 "disk right!  You can use a notebook drive, they work too, but perhaps not as well.

  Find an imaging tool to perform disk to disk cloning (ghosting).

  Remove the current disc, connect to a shopping cart.

  connect new drive to a shopping cart

  Connect to a working machine and clone.

  I don't think that you can clone an active (System) drive, that's why I said remove.

  But there may be other methods around to clone the disks these days.

  Maybe start on OS linux on CD, with a disk in the machine and the other in the caddy.

  There are always several ways to peel a Banana.

  In any case, cloning the drive will ensure that you keep your intact recovery partition.

  Once cloned infact it will be just plug and

  the machine will be exactly how it was, but a new drive.

  Ahhhh... the disk location... ??

  Raise the screen,

  You will find the release in the central section, the top of the front façade.

  (above the crack CD and scale, below the joint)

  This will push down (not in) and the rear is going to jump off.

  Loosen the two lower screws of caddy, remove the two more top of the page.

  To replace the back cover just hold against the contact surface

  and press the release button again, do not try to break all just come back on!

  If you just bend the metal tabs to the original shape once you fail.

  The rest should be simple veil.

  Hope that helps.

  HV.

• I would replace the menu bar 'Print' icon-is it possible?

  Hi people,
  I've been a user of Firefox/fan for several years now, and with my theme dark gray "Print" icon in my tray of the menus just look good. How can I create a substitute and then replace the original?
  While I ask... is it possible to create a "Print preview" icon and how/where would I have the link for it?
  Thanks in advance... Mark

  Hello

  Try this add-on from https://addons.mozilla.org/en-US/firefox/addon/universal-print/ , it uses its own icon with the color that should be better visible then the default dark gray print button.

• Screen flashing horizontal lines after replacing the RAM

  Hello world

  Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

  I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

  I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

  I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

  I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

  Any idea of what is happening and how to fix it?

  Thank you in advance!

  That could be the problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

• Z440: Z Turbo - replace the m2 SSD?

  I bought a HP Z440 (G1X59EA) a year ago and it came with a HP Z Turbo 256 GB card installed as the OS drive.

  Now, I want to replace the stick M.2 256 GB on a stick of 512 GB m2 Z Turbo PCIe card and wonder if I can just buy a Samsung MZ-V5P512BW standard and simply replace the original m2 stick on my HP Z Turbo card. (The original m2 stick is Samsung).

  Purchase of a new Turbo Z 512 GB card PCIe is too expensive, that s why I want to just buy a new m2 paste and replace the old. I am aware that I have to reinstall my OS.

  Or, to simplify, the m2 on the Turbo Z cards are a standard m2 card?

  / Roger

  Use Crystal info disc to find out what is installed and then you know what you need when you replace the 256Go. Crystal disc will tell you which interface is used.

  http://CrystalMark.info/software/CrystalDiskInfo/index-e.html

  The Samsung PCIE device you mentioned is not viable as a direct substitute in the HP Turbo Z card.

  It uses a NVMe interface instead of the MLC nand which uses theTurbo Z M.2 SSD .

  Here is an article that will give you a sone preview what I mean.

  http://www.ComputerWeekly.com/feature/MLC-vs-SLC-which-Flash-SSD-is-right-for-you