Replace Windows XP with Linux Mint in a Win 7 Multiboot system.

My current setup is a system to multiboot with three partitions on my drive system 0). D/Windows XP, Partition partition E / Data Partition and Partition C/Windows 7. My secondary drive, which is not really from this dialog box has 4 partitions for backups, system, system, and application paging areas and free space. This system works perfectly, with Windows 7 the initial boot process management.

My main goal and the basis of this announcement is to find the best way to replace my Windows XP with Linux Mint partition. Which of the following statements is the most logical, or is it yet another less dangerous path?

1 install Linux over XP?
Should I clean just format the current XP partition and install Linux Mint top, leaving the windows 7 partition in tact? Will be the start menu still works even if it is Windows 7 really think it offers a startup XP option which in reality would be Linux.

2. approach Ground Zero?
Should I reformat the drive and set up the three partitions Virgin followed of a clean intall (ouch) of Windows 7, followed a new Linux installation, and then, I'm guessing that installation of Grub to manage the startup process. ? I don't think I can use an image backup file of windows 7 (image for dos) since it will wait for a XP startup option. Windows 7 does not save/restore Win 7 without Win XP.

Help

You ask in the wrong place... Have a look here...

http://itsfoss.com/Guide-install-Linux-Mint-16-dual-boot-Windows/

Tags: Windows

Similar Questions

  • How to replace Windows 8 with Windows 7 on a Compaq CQ58

    Hello!

    Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

    1. it is posible to change 06:52 on my laptop CQ58?

    2 and if so, can I have programs default HP on this subject?

    3 and if so, how?

    When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

    2 and if so, can I have programs default HP on this subject? NO.

    3 and if so, how?

    WARNING *.

    HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

    Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

    You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

    After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

    If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

    In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

    I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

    From the top...

    (1) turn on the computer and immediately start typing the key "ESC".

    (2) when the MENU is displayed, press "F10".

    3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

    4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

    5) press "F10" and click "YES" to "Exit Saving Changes".

    (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

    (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

    (8) to turn on the computer and immediately start typing the key "ESC".

    (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

    (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

    11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

    (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

    (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

    (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

    (15) download and install the drivers from the support page for your computer.

    After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Can I replace Windows Vista with Windows 7 on my laptop which has a 32-bit platform?

    Replace Windows vista with windows 7

    Sam50

    Check the requirements below and run the Windows Upgrade Advisor to see.


    Then my computer run Windows 7?

    Basic system requirements are listed below.  Features have additional requirements.

    • 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

    • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

    • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

    • Graphical device DirectX 9 with WDDM 1.0 or higher driver

    Run Windows Upgrade Advisor to see if there are known problems that might affect installation and if you need to install the 32-bit or the 64 bit version of Windows 7.
    http://Windows.Microsoft.com/UpgradeAdvisor

  • How can I transfer Favorites from my XP PC to a new laptop with Linux Mint?

    I am currently using a laptop with Windows XP 7 years. I bought a new one and I intend to install Linux Mint. Follow the same instructions for transfer between computers when they have different OS?

    Copy bookmarks

    Press Alt or F10 to bring up the toolbar. Then select
    Bookmarks. Access key is < Control >(Mac: < command >)< shift > B.
    Once the window is open, the top of the page, press the button
    Import and backup. Select export bookmarks to HTML and follow
    prompts and save it in a HTML file. Copy the file to another computer.
    Repeat the above instructions, BUT select Import Bookmarks in HTML,

  • Return to Windows Vista to Linux Mint

    Hi, for some reason my son decided to install Linus mint on a borrowed laptop computer that had Windows Vista installed. Is it possible to regain the Widows Vista laptop and the removal of Linux Mint. Unfortunately, we do not have a startup disk or one for Vista recovery disk. Any help would be appreciated. Thank you

    The first thing you'll need to do is to contact the manufacturer of your laptop and
    see if there is a recovery mode which can be used without the DVD.

    Their web site can also have details on this process and will be easier and
    faster access.

    It is possible, there is one but when your son installed the second operating
    system, he deleted this ability, so you will need to order a replacement set
    the installation discs for the manufacturer.

    wrote in message
    News: * e-mail address is removed from the privacy... *

    Hi, for some reason my son decided to install Linus mint on a loan
    Laptop computer that had Windows Vista installed. Is it possible to return the
    computer laptop back to Widows Vista and the removal of Linux Mint. Unfortunately, we don't
    not a starting disc or a Vista recovery disk. Any help would be
    appreciated. Thank you

  • Please HELP replace Windows 8 with Windows 7?

    Hi all. Replacing Windows 8/8.1 with Windows 7 on my father-in-law's cell phone.

    I have no problem removing Windows 8 and Windows 7 installation. I have some comes to find the proper drivers.
    News of the machine:
    HP Pavilion G7 series (Intel based)
    Model # C5E41UA #ABA
    [Edited by Moderator] Serial No.
    Thanks in advance!

    Hello:

    You should be able to use all the W7 x 64 drivers and this model on your software.

    Your model uses the Ralink wireless network card driver and the Intel HD graphics driver.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311#n701

  • Hello from Firefox with camera backwards (with linux Mint 17)

    Hello, I am running Firefox 36.0.1 and I tried the new addon from Hello. Unfortunately, my camera is displayed upside down. It was the same problem I had using Skype and I had to update libv4l and that worked. It still works now for Skype, but Hello the problem is back. (I use linux Mint 17)
    Any suggestion?

    Skype and Gtalk for linux are 64-bit by default, but Firefox is a 32-bit program (for now). LD_PRELOAD = /usr/lib/libv4l/v4l1compat.so will not solve this problem in Hello because it is a 64-bit library.

    Using /v4l1compat.so is the right idea, but that error "cannot open shared object file" comes from the kernel and not from Firefox. "Cannot open shared object file" means that the file is not there or that your user name is not allowed to read. Verify the path and permissionsv4l1compat.so (after checking that the library is there and that it has the appropriate permissions) and then try to run: LD_PRELOAD = / usr/lib32/libv4l/v4l1compat.so/usr/bin/firefox

  • Replace Windows 8 with Windows 7

    Original title: Windows 8

    I bought a computer last week which of course has Windows 8.  I had nothing that trouble and would like to to replace it with Windows 7, however, I don't think not that I would have to pay to replace.  Can you send me Windows 7 or I can download it without having to buy it.  Windows 8 is horrible!  Just get a reply or sending an email to the Microsoft Community appears as an act of Congress.

    Seems like you should dial the computer number of supporting manufacturers.   To talk to them.   They are responsible for solving problems with windows 8 software on the computer, they sold to you.  OEM take responsibility for support in order to get great prices good.

  • Replacement windows blown with beautiful background

    Hey people

    I have a few images of a person doing yoga inside and the windows are completely blown. I thought I could fix this by replacing the windows with a bottom. However, I have some difficulty making it realistic!

    Does anyone have any suggestions: -.

    windows blown out.JPG

    ultra key.JPG

    Insulate windows with opacity masks

    And drop the background in V1.

    But if the Lady moves on the window, you'll have to animate the mask.

    Bette made in AE with Rotoscoping.

  • Replace windows 7 with XP on a Sony Vaio

    Have 2 PC Sony Vaio.  One with another XP with Windows 7.

    You want to load XP on more recent (June 2011) computer instead of windows 7.
    Cannot go back to dealer to the United Kingdom where we bought it because we are long term on a sailboat to the Panama.
    Dick & Jennifer Blamey

    XP is an old operating system and will not work on new computers, especially those designed for windows 7.

    It's like install an old volkswagen beetle engine in a new hummer.

    at best, you might virtualize xp on windows 7, using a program called virtual pc from microsoft.

    Virtual PC will allow xp run on windows7 desktop computer, as if it were a regular program.

    but a virtualized xp does not exactly a performance, as if we're the bones of the man on an old computer.

    a virtualized xp can run old programs designed for xp, but cannot run hardware / devices designed for win7.

  • ES1-311-C82S with Linux Mint 17.3 is not turned off properly


    For anyone having the same problem: upgrading the kernel 4.4 solved the problem.

  • WLAN controller for nc8430, Linux Mint 14 and WIN 7 update

    Hello

    I want to upgrade my nc8430 (EM741AV) to the Standard WLAN n. is possible to do?

    What card is accepted by my Board?

    Thanks in advance,

    amkern1

    Hello:

    Without hacking (modify) the BIOS (which I do not know how), you can install one of the adapters listed in the service manual for your laptop wireless.

    There is no card n wireless supported for your model.

    You must buy an external USB Wireless N adapter if you want faster connection speeds.

    Installing an unsupported card will cause the laptop to put an end to started until the card is removed.

  • Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

    I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

    It may be possible that the upgrade to Windows 10 gets no success.

    I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

    Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

    Part links can be resolved. By using the links to third party is at your own risk.

    You can also check:

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • HP3521: HPLIP install not on Linux Mint 18 with XFCE

    I try to install HPLIP on a laptop Dell Latitude D510 with Linux MInt 18 with freshly installed XFCE.  Towards the end of the HPLIP installation, I get the following error message:

    Printer driver HP HPLIP installs not entirely:

    RE-CHECKING DEPENDENCIES
    ————————
    error: a required dependency "libtool (libtool - library support services building)" is still missing.
    error: Setup cannot continue without this dependence.
    error: Please manually install this dependency and re-run this installer.

    How 'manually install' this dependence and continue installing HPLIP?  The printer will print with the usb cord but I can't print or scan wireless. The hp-setup 192.168.1.117 command no longer works...

    Thank you.

    apt - get install libtool-bin

    It worked.  HPLIP now installs fine.  The problem is perhaps hplip - 3.16.7.run.  You can check...

  • Hi, I am from india.i Riou bought a laptop with linux and I wanted to install windows 7. is this possible? If Yes, then HOW?

    I recently bought a loptop computer notebook Acer Gateway for NE56R in India, in which linux is preinstalled. now, I want to have windows installed too, either by installing windows symaltaniously with linux or uninstall linux and install windows.

    in both cases, I need to buy windows OS.

    Where can I purchase and none to take care

    your response will be appreciated

    Thank you

    Riou

    Hey riri,.

    Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

    According to the description, you have purchased a new laptop with Linux installed on it and I wanted to install Windows 7. To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

    You want to install Windows 7 in dual boot with Linux or clean install Windows 7?

    In case you want to uninstall Linux and I want to just install Windows 7, then you can follow this article.

    Installation and reinstallation of Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

     

    Note: All data on the Linux partition will be deleted if you perform a clean installation of Windows 7. We recommend that you backup before formatting or installing Windows.

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

Maybe you are looking for

  • TROJAN

    Dear, I have problem with my iPhone backup 6 for the local computer when the backup process from the local antivirus installed on my computer by setting the Trojan virus hide the file name/calling (order details specification.exe). Whereas the iTunes

  • After standby mode Satellite L300 cannot connect to the internet

    Hello I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.The only way I can connect again is to restart my laptop. Can so

  • Gel - MS Security Essentials Scan complete and during backup

    HelloVirgin of forum here! My machine is freezing during the full analysis using Microsoft security essentials and everything by making a backup.I tried to make a backup to make sure that if I had a failure while setting the security essentials that

  • Strange problem with LAN on Satellite P10 connection

    Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))I wonder is this a hardware in my laptop pro

  • A security update (KB9771165) installed this update at least 30 times this past week...

    Whenever I'm on my computer, it wants me to install... Yes, I did! and I have also shut my computer down and has the update 'installed '...