Replaced GPIB with VISA now in data loss

Similar Questions

• play sounds temporary and file of your choice when reading data with VISA functions?

  Hello.

  I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

  now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

  Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

  I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

  altougth I use an another while loop for his apartment because I want to save time CPU.

  Thank you.

  

  I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

  Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

• I recently updated my iPhone to iOS 9.3 6s and now my data and wifi are in place. Now I can't open the apps and send messages with data and barely on the wifi. I've tried everything, and it still does not work.

  I updated my iPhone to iOS 9.3 6s today and now my data and wifi are in place. Whenever I try to open an app or send text messages with data it does not at all. And with wifi, it just works. I tried just like turn roaming off and off and other lte but nothing seems to work at all. Can someone please?

  I have this same problem too, it really gets me upset

• TDMS replace specific fields with the new string data

  Hello

  Wonder if someone could advise a more easy, more clean solution or I may end up making a big mess on my diagram!

  I use DaqmxConfigureLogging.vi to write data in the .tdms and this file everything works. Unfortunately, this vi affects physical names such as Dev1/ai0 channel names in Journal of root and group of tdms files.

  I would like to read individual fields where they are written and replace them with the names of channel. The location of these channel names is fixed on the tdms file.  However, I noticed using file i/o functions, such as file open/close/set position could not work, because these files do not seem to recognize the .tdms file. And it is not all fields tdms functions you want the value of the positions on sheets of root/channel files tdms and read fields desired as string data.

  Any suggestions? I can miss something quite simple!

  crossrulz wrote:

  k waris wrote:

  "In fact, it uses some names you give the channels and groups.

  I use Dev1 / ai0:15 connect all 16 channels. Unfortunately if using 'name to assign' entry will not do the job in my case!

  Of course, it will be.  Use a loop FOR with DAQmx channel create to create each channel and give them a name.

  Just to clarify what I meant here...

  

• my old motherboard was brockin so I replaced it with a new one and now I carnt activate windows pleae help

  my old motherboard was brockin so I replaced it with a new one and now I carnt activate windows pleae help

  Something that all OEM computer owners need to understand...

  Citing the example of a desktop HP ENVY h8-1419 PC...

  It is the motherboard that determines the make and model of a PC OEM, NOT the case.

  OEM motherboards contain BIOS custom, in this case HP. Installing OEM key code and recovery disks or partitions will work as long as the Windows installation find a BIOS from HP and the type of motherboard, Windows will validate and remain active.

  When replacing the motherboard, for some reason, with a motherboard that does NOT have a custom BIOS HP, the computer is no longer a desktop HP ENVY h8-1419 PC.

  If the 'new' motherboard first saw life in a DELL computer, it then becomes a DELL. It is not possible to use custom installation of another brand of OEM OEM.

  If she started life in a box of motherboard manufacturer on the set of a major computer parts retailer, is no longer a desktop HP ENVY h8-1419 PC. It's everything that appears as the make and model in the box...

  In the first case, you will need the COA, the key code sticker and the DELL machine DELL of origin if original installation media you want together upwards, the drivers and all.

  Or, as in the second case, you will need either a retail key code or a code key of system manufacturer which must be purchased.

• Data loss with the opening of files the customer CS6 in the clouds

  Installed all recent updates...

  Files the customer cloud version...

  Opened in CS6 with the Error Message "the file '-' was generated by a newer version of Illustrator.» You want to import this file? Data loss can occur.

  A LOSS OF DATA OCCURRED.

  What is going on?

  Rebuilt all of the relevant files related to the program, Mac OS x 10.7.5 cleaned

  All... always referenced the file opens with missing data (colorful box and setting the white guy in two areas on the product)

  Not good legacy import

  Not good feature in the production

  Not good

  Someone needs to open the file in CC and save in a compatible version of CS6. CS6 can open older versions, without data loss, but not the files of CC.

• Producer/consumer vs Master/Slave of data loss

  Hello users of Labview,.

  I did experiment with vs p / M/S lately in the context of data aquistion. Many messages did appear (correct me if I'm wrong) that p/c is the correct architecture to if the data retention is desired, so that's what I tried to implement.

  In the loop of producer, I've included 3 Assistant DAQ VIs (2AO, 1 HAVE), which generates data actively and which is being queued. I have 3 other loops of consumers, two of which are consumer 1) written loops of 2) outputs TDMS data of a chart 3) no producer: structure of the event, monitors changes to the user interface.

  When I run data acquisition, the generated file are always half either acquire the half of the sample that I've specified regardless of the sampling rate. I also have a strange displayed graph (see image).

  However,.

  If I replace with a master/slave architecture, this seems to solve the problem.

  So question is: anyone met with this kind of problems? Are there disadvantages to stick with M/S instead of p/c in terms of data loss?

  Thank you

  johnji wrote:

  I think I'm well done

  You are not.  Once an article is removed, he went.  Since you have three loops made of the same queue, each loop will get ~1/3 of the data.  If all the loops are to treat everything, then you want another line for each loop and meet the producer, write to each queue.  You can also use a user event.

• Palm E2 data loss

  Help! I loat my PALM E2 and tried to sync my desktop with a new E2 I had and she deleted the office somehow.  Is it possible to recover what was in the calendar before my mishap.  Thank you!

  millershrink wrote:
  

  Thanks WyreNut.  I didn't was not able to recover data of ants from the desktop as a tech friend who spent 2 hours at my house last night explained to me because I had put my system for handheld to replace office, inadvertently.  He was able to recover a large part of the data loss because I Carbinite on this pc.  So I'm pretty much OK.  Once again thank you for your time and expertise.

  Exceptional!

  You can never have too many friends 'tech', huh?   Accessories for her to properly diagnose our ancient, yet superior PDA system!

  

  WyreNut

• How to convert NTFS to FAT32 without data loss?

  Hello
  I want to format a computer with 4 logical partition, where C: is partitioned FAT (Windows NT Server), and other (D:, E: and F :) are on NTFS.

  Now I want to install Win98 on it, which requires the hard drive or FAT32 partitioned. How to do that without losing valuable data in all 3 NTFS partitioned drives.

  Hello

  I think you are very lucky.

  Aomei technology is giving away NTFS to FAT32 Converter Pro Edition 1.5 which can help you convert NTFS to FAT32 without data loss. The offer is limited from 18/05/2011 ~ 23/05/2011.
  Contest page: http://www.aomeitech.com/giveaway/ntfs2fat32.html

• Converet GPT without data loss

  Hello

  I am formatting my system. Partition there are two in my drive C & E system. Now when I'm getting type format my PC. He is in error of TPG. I have given in the E drive, now if I use the command wipe the drive, it will clean my data. So, how can I change one partition or a full disk without data loss. We formatted our system C drive.

  Kind regards

  Kuldeep Singh

  Hello Kuldeep,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the exact error message or code when you say, 'mislead the GPT?

  Thank you for details on the issue.

  GUID Partition table (TPG) is a new style of partitioning that is part of the Unified Extensible Firmware Interface (UEFI) specification. This is used for Windows 8 facilities factory for more flexibility of partition and

  more advanced features of Windows 8. With an installation of Windows 7, the GPT partition must be removed and UEFI BIOS must be configured in a configuration to boot Legacy.

  I suggest to check the following items and check if it helps.
  Reference:
  http://www.Dell.com/support/article/BB/en/bbdhs1/594701/en

  Windows and GPT FAQ
  https://msdn.Microsoft.com/en-us/library/Windows/hardware/dn640535 (v = vs. 85) .aspx

  Important notes:
  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Application of expression Boolean generation causes a data loss condition tags that are excluded as 'NOT' tagged

  Hi all

  I am running FM12.0.2.389 on Win7-SP1 (64-bit) laptop with i7 & 16 GB of RAM.

  I reported this problem as a bug in the Adobe bug base, but they were not able to reproduce the bug with the files I sent. This leads me to believe that the conflict is perhaps the result of something gone wobbly or conflicting in my system. Here's what happens:

  Using 'Set expression' triggers crash FM on the next file > save, displays the error message on the imported graphic and loss of data which has been marked with conditions to exclude "NOT" in the phrase Boolean build.

  Steps to reproduce using my files (zipped):

  1. open Ch1_Introduction - 4FC.fm.

  2. create a build expression named 3DpartnerKitConditions using this definition:

  not "LIVEonly" and not 'InstallOnly' and not ('Commentary' or 'Deleted' or 'Future' or 'international' or 'PostInstall' or 'Question' or 'SDinstallOnly')

  3 file > save.

  4. apply the expression of the construction.

  5 file > save... (crash)

  Result: All conditions excluded via Boolean DO NOT tag data is not longer in the file, as seen in Ch1_Introduction - droppedText.fm.

  What I THOUGHT was going to happen are that tagged data excluded via Boolean DO NOT conditions should stay in the file but hidden and can be demonstrated easily through text show/hide conditional > show all with indicators of Condition Show. Sometimes it does not crash FM and must behave this way, but 90% of the time the result is the crash and data loss.

  Other things that I am looking at, I think I have a few scripts or running plugins that have been written for previous versions of FM. Yes, I'm addicted to the things of CudSpan, Bruce Foster, Silicon Prairie, FrameExpert, Sundorne and Miaramo. I noticed that (admittedly written in FM11) SafetyMIF causes crash FM at the exit, but as we use the Git repositories for incremental recording, trying to produce regularly the MIF is quite complicated the case, and record the bin file from FM bloats the referential way too technical to be happy at all.

  I don't know what triggers the question of expression Boolean tag, but I really, really need to solve. I'm a solo writer (for now) with a very heavy load of docs and deadlines that can be managed by only sound sourcing methods. Thus, these files depend on variables, condition labels, shared files between different books, shared graphics and overlays of text, if any.

  Someone in the community can help me find a way to identify the root cause? I plan to approach troubleshooting by first uninstalling FM, cleaning the trash to uninstall typical Windows, reinstall fresh FM, then adding the plugins one at the time and the attempt running Boolean tag setting after each plugin is added to see if I can tell which one is the trigger of the question. If it is a corrupt, obtained FM facility that would solve the problem, too.  What do you think guys?

  Thank you

  René

  Rene,

  It is a healthy approach and probably the only thing, because there may be interactions between them (even though I probably have most of the same and do not see the odd-ball accident during recording).

  Bruce Foster those who aren't are not compatible with FM12 (or even 11) - too old. Some of the plugins of Chris also had problems with FM11 and 12 If you don't have the correct MS 32-bit operating times installed (even on a 64-bit operating system).

• Irregular data loss - function from PL/SQL returning data using Ref Cursor

  Database Version: 10.2.0.4.0 (node 2 CARS)
  
  The high-level process flow is as below:
  (1) insert records in a few tables & commit the same
  (2) call the pl/sql function to extract files (on certain conditions with joins with other tables) of the tables which are filled in step 1.
  -> It uses the ORDER BY clause to queries inline & line number 5000 records return for each call.
  Sense - if inline query is supposed to return 1,00,000 records then 20 calls to the same function. This, because the application cannot contain records beyond number.
  (3) the data returned by the ref cursor is then processed by application (Tibco BW) to generate the flat file.
  
  We are facing the problem of data loss in the file and there is no fixed model. It happens once between 200-300 calls process.
  Resolution: When the problem occurs, triggering the process and in almost every time re-outbreak of the process provides required data.
  
  Guidance on what could be the reason?
  
  * Examples of Code for the function:
  CREATE OR REPLACE FUNCTION FUNC_GET_HRCH_TOTAL_DATA)
  outinstrid in NUMBERS
  outinstrkey in NUMBERS
  rownumberstart in NUMBERS
  rownumbereend in NUMBERS
  err_code OUT VARCHAR2,
  err_msg OUT VARCHAR2)
  RETURN PACK_TYPES. HRCH_TOTAL_CURSOR
  IS
  REF_HRCH_TOTAL_CURSOR PACK_TYPES. HRCH_TOTAL_CURSOR;
  BEGIN
  
  OPEN FOR REF_HRCH_TOTAL_CURSOR
  SELECT *.
  FROM (SELECT A.HIERARCHY_KEY, B.KEY, B.VAL_KEY, A.KEY_NEW, C.ITEMID, B.VAL_TAG, B.sort_order, ROWNUM ROWNUMBER
  OF AOD_HRCH_ITEM A, AOD_HRCH_ATTR B, AOD_HRCH_ITEMS C
  WHERE A.outputid = B.outputid
  AND A.outputid = C.outputid AND A.outputkey = B.outputkey
  AND A.outputkey = C.outputkey AND A.outputid = outinstrid
  AND A.outputkey = outinstrkey AND A.ITEM_SEQ = B.ITEM_SEQ
  AND A.ITEM_SEQ = C.ITEM_SEQ AND A.HIERARCHY_LEVEL_ORDER = B.SORT_ORDER
  ORDER BY A.HIERARCHY_LEVEL_ORDER DESC)
  WHERE ROWNUMBER < rownumbereend
  AND ROWNUMBER > = rownumberstart;
  
  
  RETURN REF_HRCH_TOTAL_CURSOR;
  EXCEPTION
  WHILE OTHERS
  THEN
  err_code: = x_progress | ' - ' || SQLCODE;
  err_msg: = SUBSTR (SQLERRM, 1, 500);
  
  END FUNC_GET_HRCH_TOTAL_DATA;
  /
  
  Published by: meet_sanc on February 16, 2013 10:42

  Your SELECT statement is almost certainly incorrect

  SELECT *
    FROM ( SELECT A.HIERARCHY_KEY, B.KEY, B.VAL_KEY, A.KEY_NEW, C.ITEMID, B.VAL_TAG, B.sort_order,ROWNUM ROWNUMBER
             FROM AOD_HRCH_ITEM A, AOD_HRCH_ATTR B, AOD_HRCH_ITEMS C
            WHERE A.outputid = B.outputid
              AND A.outputid = C.outputid AND A.outputkey = B.outputkey
              AND A.outputkey = C.outputkey AND A.outputid = outinstrid
              AND A.outputkey = outinstrkey AND A.ITEM_SEQ = B.ITEM_SEQ
              AND A.ITEM_SEQ = C.ITEM_SEQ AND A.HIERARCHY_LEVEL_ORDER = B.SORT_ORDER
            ORDER BY A.HIERARCHY_LEVEL_ORDER DESC)
   WHERE ROWNUMBER < rownumbereend
     AND ROWNUMBER >= rownumberstart;
  

  Since the ORDER BY is applied after the ROWNUM is assigned in this case, your query is requested for a period of 5000 lines any arbitrariness. It would be perfectly valid for a single line to return in each of your 200 different calls or for a line to return in any of them.

  You definitely want to do something in the sense of the canonical askTom wire

  select *
    from ( select a.*, rownum rnum
             from ( YOUR_QUERY_GOES_HERE -- including the order by ) a
            where rownum <= MAX_ROWS )
   where rnum >= MIN_ROWS
  

  That said, it seems inconceivable that Tibco is unable to manage a cursor that returns more than a certain number of lines. You do a ton of work to return the data pages that are certainly not necessary. Unless you're saying that you somehow paralyzed your installation of Tibco giving him a ridiculously small amount of memory to process, something doesn't look good. A slider is just a pointer - it holds that no data - so the number of lines that you can extract a slider should have no impact on the amount of memory on the client application needs.

  As others have already pointed out, your exception handler is almost certainly do more harm than good. Return the error codes and error messages as from the OUT parameters, instead of simply allowing the exception to propagate deletes a ton of useful information (such as the mistake of the stack) and makes your process much less robust.

  Justin

• Data loss from turnover

  Hello Experts,
  
  I got backup fully on July 21, 2011 09:00 and I took archivelog all backup JULY 21, 17:00 and then the next day I took another backup full July 22, 2011 09:00, now I have confusion about the backup archivelog all is what he still necessary after the full backup taken on July 22, 2011 09:00
  
  We can keep data loss and I want to restore the database up to the last full backup of July 22, 2011 09:00 or assume that I lost my archive backup and archive files too, can we restore database without archivelog backup and files?
  
  Thanks in advance
  
  Kind regards
  Asif
  
  Published by: Asif Hussain on July 21, 2011 23:29

  If my database created over 1000 files archivelog 6 months before plowing date, so I demanded of all files from archive until today with the full backup?

  Rep. : No, you must all archive logs after your last full backup taken.

  Created DB: January 1, 2011

  Last full RMAN backup: 20 July, 10:00

  Then to recover the database without any loss of data you need for a full backup of 20 July 10:00 + all the Archives of the newspapers after the full backup.

  # Time based recovery

  bootable media;
  restore the database up to the time "TO_DATE (29 October 10 19:00","MM/DD/YY HH24:MI:SS')";
  recover database until time ' TO_DATE (29 October 10 19:00 "," MM/DD/YY HH24:MI:SS') ";
  ALTER database open resetlogs;

  # YVERT database recovery

  bootable media;
  restore the database to the SNA 10000;
  recover the database to the SNA 10000;
  ALTER database open resetlogs;

  # The sequence in function recovery journal

  bootable media;
  restore the database up over 100 1 sequence;
  recover database until over 100 1 sequence;
  ALTER database open resetlogs;

  Concerning
  Asif Kabir

• What are the causes of data loss during an update?

  Just what are really the causes of data loss or corruption when you update. Most sites will tell you to back up what I'm doing, but none of them actually appoint a cause to save.

  -Thanks in advance

  Minor updates in an OSX * may * break the file system.  Fully upgrades to other OSX replaces almost all file systems.

  Some backup of people even before you install some software packages, because they know how this package changes directories OSX.

  Backups are never a waste of time.

• Need help to avoid data loss on a corrupt and/or failure to hard drive

  I don't know what happened. One minute I'm surfing the web and listening to music on iTunes. Then out of nowhere he had a sudden failure. Changed not long at all, but now when I try to turn on my computer, it starts normally but then shortly after that the chime and the apple logo appear, if a progress indicator yet that I've never seen before today. Until the progress bar is still the size of my little finger nail, the computer turns off just. I started in recovery mode and run disk check and repair utility. Make sure the disc is not far off when he said something like - disc cannot be checked completely. Disk needs to be repaired. So when I click on the repair disk, it works only for maybe a minute before it comes up saying - utility disk can't repair the disk. Upwards from your many possible files, reformat the drive and restore your backed up files. So obviously it's not good. What are my options and can I do to avoid losing data that is not already saved? I have a lot of things that have not been backed up and lose some of them would be pretty damning. That's my main goal; data loss as little as possible. My computer is an iMac 2012 end Mavericks 10.9.5 running.

  Thank you.

  You do not have a current backup? If this is not the case, your only real option may be to pay a data recovery company and see if they can help you. Which can be very expensive.