Replaced the hard drive (second hand)

Hello

I replaced the hard drive on our laptop because she didn't, I bought a second hand one and it were mounted today but the F2 system diagnostic check States a message chip check past short DST failed. It's a like for like hard drive WD Scorpio Black etc. the replacement drive is spining am I missed something other that I bought another drive hard duff.

I have to order a new set of discs of recovery that I can't find the original ones as the laptop brings dust and out of warranty.

Someone help

Thank you

Hello

Browse the following documents carefully & follow him.

Test a HDD in BIOS ; Laptops HP - how to run the hard drive Test

Hard disk failure errors

Test the hard drive by using SMART

Normally the HP disk HARD Selft Test works well, but the information stored in S.M.A.R.T indicates that your HARD drive will fail.

It seems the automatic test crashes if there is a bad sector that has not yet been remapped. If you back up all your data before performing a full format on the disc it will fix the problem (assuming it's the same problem I had). In the meantime, I would check what are the SMART test results... you may have a faulty hard drive. (one or two bad sectors are not as bad as HP are affected because these will be remapped as soon as a write is attempted on them).

If it gets corrupted, go for another one again.

First of all trying to read the above documents and try to do it again.

Thank you

CLICK ON BRAVO IF MY ANSWER HELPED YOU *.

* CLICK ON "ACCEPT AS SOLUTION" TO HELP OTHERS FACING SAME ISSUE *.

Tags: Notebooks

Similar Questions

  • How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

    Hello

    I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

    Here are some technical details of my current system:

    -MacBook Pro 15 inch, late 2011 model A1286

    -OS yosemite

    -16 GB of memory/RAM

    -Currently using stock HD

    All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

    Thanks in advance for any help.

    You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

  • Replaced the hard drive - now screen Intel Rapid Storage Tech comes first?

    A couple of weeks ago, I replaced the hard drive in my laptop Pavilion dm4-3090se with a 240 GB Samsung SSD (the laptop came with a 500 GB Hybrid HDD which is now my backup).

    Everything works fine, except when I first put it in, I get the screen shown in the image below and it takes a good 5 or 6 seconds before it closes and opens Windows. How can I make this screen go away?

    You are running Windows 7 or Windows 8? I see that you still have the installed cache acceleration mSATA 32 gig drive and it has the Intel Rapid Storage, just off acceleration partition. Can you find the control panel Intel Rapid Storage and reformatting the drive to 32 gig Accelerator? It will look something like this:

    I suggest also just remove acceleration 32 gig of hard drive. You have really no more. You can not acclerate a SSD and shouldn't do anyway since having a main SSD is still faster than having the accelerator. See page 44 of the Manual:

    Manual

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

    My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

    Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

    Once you have the disks, install in the usual way.

    Tom Ferguson

  • Windows 8 license after replacing the HARD drive

    Original title: change of equipment (HARD drive)

    Good night, I have a computer laptop windows 8 and I fear that the HARD drive (malfunction) he'll need replacement.

    My question is, what will happen to my windows 8 license, once my current HARD drive stop working (because the key is encrypted in the bios)?  
    Please note that in the country where I live customer support is, at best, ineffective, so personal attention is not an option.
    Thank you before hand.
    Send you my best regards.

    Hi, Caesar,

    Activation pairs your product key in your hardware configuration and helps to verify that your copy of Windows is not been used on more computers than to allow the 3668Microsoft Software License Terms.

    If you change the hardware on your PC, you must contact support to activate Windows by phone.

    As you have decided to replace the hard drive, you could face an activation/Windows not genuine error.  You can follow these steps to make a phone activation.

    a. press Windows key + X , then click run, then type: slui.exe 4

    b. press the ENTER key

    c. Select your country from the list.

    d. choose telephone activation .

    e. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    f. explain your problem to the support person

    See the article:
    How to activate a Microsoft product using Microsoft Product Activation Center

    http://support.Microsoft.com/kb/950929/en-us

    In addition, refer to this topic:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/hardware-changes-no-more-activations-available/ed283ad6-D462-478f-a1a0-8922226ce82b

    Hope this information helps.  If you have any other questions, we would be happy to help you.

  • Replace the hard drive and OS re - install Inspiron One 2330

    Hello

    I had my all-in-one desktop Inspiron One 2330 for about 18 months.  I see serious problems with the hard disk, the system hangs, and the event log is full of HD playback errors.

    ePSA diagnosis shows code 200-0142 telling me to replace the hard drive.  The chkdsk utility runs and sometimes corrects problems and sometimes clean.  Such problems at low altitude, I'm surprised that I can start far enough away from launch internet explore and write this message.

    I called Dell support and they were kind enough kindness to send me the original floppy Windows 8.1 for the Inspiron 2330.  I have a disk hard solid state ready to install, and I saw a bunch of great videos from YouTube that explain how to open the case.  The HD swap is not a big deal, but I have a few basic questions.

    I know that many readers here know the answers.  Thanks in advance for help...

    1. If I install a blank HD in this installation media machine Dell recreates all of these crazy Dell partitions?  I have not of much use for them until I ran the diagnostic ePSA and it was extremely helpful.  I hope that you will tell me that if I do a fresh install, I get a new partition ePSA addition to 8.1 Windows on my replacement drive.

    2. I do not see why this machine won't support a SATA SSD SanDisk brand new instead the 1 TB hard drive that came with it.  Is it OK to use SSD drives in these Machines from Dell?

    3. have good links for the operating system Dell re - install procedure?  I will be installing Windows 8.1 on this drive.  Strangely I find no procedure to re - install step by step operating system.

    4. I have read that the activation key for Windows is now integrated into the motherboard of the machine somewhere.  Do I need to enter this key when I re-install?  I don't see all the stickers on my machine with the key.

    Thank you for your help,

    I finished the upgrade SSD in my Inspiron One 2330 with very little trouble.  Here are answers to the questions for those who find my post using original research.

    1. the Dell Windows 8 installation media disc does not any recovery disc partition, new, retail.  If you install fresh by booting from the DVD drive, you get a nice clean install of Windows 8 without any extras Dell.

    It seems that the diagnosis of ePSA is hosted on the motherboard of the system and not the hard drive.  I have had no trouble to boot in diagnostic mode to run tests of ePSA, even if I see any Dell diagnostic partitions.

    If you install fresh from Windows 8 media you definitely lose the Dell recovery partition.  No big loss.  It is a little strange to wait the software stored on the hard disk to help you recover problems with the same hard drive.  I'll just do another clean DVD media installation if this happens again.

    2. my SanDisk 256 Gb SSD is impressive.  It costs ~ $80 on Black Friday, and now my Dell Inspiron One 2330 boots in 9 seconds.  This is measured from fully powered down for the moment, I type my password to connect.  9 seconds - crazy fast.  Modernization of the best ever.

    3. my internet search found many useful message board posts, some web sites and blogs.  Unfortunately there is no official Dell Reinstall procedure that I could find.  The complete replacement of unplugging the power to see Windows 8 on the screen by using a new SSD was about 70 minutes.  I gathered the information I could find and guess the rest.  Worked for me.

    4 Windows 8 activation code is not necessary for a media of Dell Windows 8 re - install.  The installation process of Windows 8 should be reading the key out of the motherboard because I've never been invited to type one in.

    Here are a few other tidbits:

    5. the Dell Windows 8 media support I was sent by Dell wasn't Windows 8 and 8.1.  I spent more time pulling down of updates, restart and then installing Windows 8.1 on the app store that I did replace the hard drive.  Don't forget: some updates depend on other updates being present.  Really, you need to run the Windows update utility several times to get everything down.

    On the good side of things, my restarts are now long 9 seconds.  I have no problem whatsoever reset to any indication that the system needs to restart to complete the installation of an update.

    6. after obtaining my update to 8.1 Windows system, I installed all the latest drivers for the Inspiron One 2330, which could be downloaded from Dell.  This figure includes a BIOS update which has been a royal pain to apply.  To do this I had to create a start-up separated from 'BACK' USB key.  In fact, it is possible to create this rudimentary special boot using utilities downloaded from Dell drive.  Locate the "diagnostic Distribution Package (DDDP)".  Good luck with that.

    7 Dell backup and restore has been completely useless for the replacement of my SSD.  I have had two drives bootable USB thumb complete with full system backups, the backup restore and Dell refused to restore my data on my Virgin SSD drive.  The error message has complained that my new drive is too small.  It was laughable: my original hard drive was something like 95% of free space.

    8. There is a bonus in all this: by rebuilding your system using the original Windows 8 media, you get a nice fast machine without the excessive Dell bloat-ware.  I do miss the software pre-installed in all.  Glad to get rid of it in fact.

  • Is it possible to replace the hard drive with an SSD? or would it be too expensive?

    Is it possible to replace the hard drive with an SSD?

    or would it be too expensive?

    Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

    Re: This win to install a SSD drive in a PowerBook G4?

    Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

    FYI - I have used the adapter is even cheaper now

    https://www.Amazon.com/GP/product/B009BA8V4M

  • Problems with folder permissions after replacing the hard drive

    Hello

    Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

    drwxr-x - 13 501 501 442 5 July 2013 MG

    Any help would be greatly appreciated!

    Running OS X El Capitan

    10.11.4 version

    Try this first:

    Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

    When this does not help:

    Reset password utility in the recovery Partition:

    1. Restart your computer from the recovery partition.
    2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
    3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
    4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
    5. Exit the utility password and return to the main recovery menu.
    6. On your keyboard, press + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.
  • Replacing the hard drive on my Portege A200

    Hi, I would like to replace the hard drive in my a200 with a bigger, but I don't know how to remove the current, just wondering if any of you guys could help me?

    Thank you james

    Hello James

    Unfortunately the A200 does not for me, but the concept is still the same. At first check if you can find coverage of HARD drive in the lower corner of your unit. If you can't find it from the outside as it comes to the very complicated situation. It is possible that the HARD drive is under the keyboard.

    If you have not many don't experience do it alone, because you can damage something, and the guarantee is no longer valid.

    Good luck!

  • HP Pavilion Notebook n267sa 15: replace the hard drive and restore its 8.1 windows

    the hard drive corrupt including the partion of rescue I had to replace the hard drive. This left me with a work computer, but no o/s. where and how can I get a copy of the 8.1 window without having to buy a new copy

    Hello:

    You can order this e-partner HP recovery disks from the link below for your model.

    http://www.best2serve.com/page/rcd_landing?txt_search=F9F41EA

    You can also see if you can order directly from HP to the United Kingdom by calling this number...

    0207-660-0596

    Mon - Fri 08:30 - 18:00
    (except public holidays)

  • Equium A100-338, replacing the hard drive

    Hi, the hard drive from my Toshiba Equium A100-338 just broke down on me, and now I think to replace. Because I'm not good material, I thought I have ask for advice about it here first. Is this an easy repair that can be done on your own? If so, how can I know if my computer match which new hard drive? I know that I need a 2.5 inch Sata-150 and all that, but I'm not sure of the compatibility.

    In addition, it is worth the money to make repairs like this on such an old computer? I wouldn't throw it out when everything else seems to work very well.

    Hello

    In the Toshiba forum you will find here with some nice instructions how to replace a HARD drive on the different laptop models.
    I found a movie that explains how do on Satellite A200.

    Replacing the HARD drive is not very delicate, and the process is similar for all models of laptops.
    Check it out:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=120

  • Re: Tecra A9 - 11M - replace the HARD drive with a larger

    I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

    Any suggestions on recommended records say 500 MB?

    Difficulties to install Windows 7 on this model?

    Hey,.

    > Any suggestions on recommended records say 500 MB?
    I assume you mean 500 GB and not 500MB, right? ;)

    Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

    You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

  • Satellite L300-A13 - how to replace the HARD drive?

    I need to replace my drive hard because I got a disc error and I could hear noises from him. Someone knows the size of the current hard drive replace (either 3.5 SATA or whatever it is)?

    No space memory but actual size, so it can fit inside my computer and someone know a tutorial to replace by yourself?

    Hello

    To replace the HARD drive, you need a 2.5 HARD drive SATA interface. These 3.5 HARD drive you want to say are only for desktop PC s peut t used in laptops to buy a 2.5 so one.

    But it makes no difference which manufacturing you buy the HARD drive or the size. Just look for a 2.5 HARD drive SATA interface.

    Replace the drive is pretty easy: just remove the two screws on the underside of the cover of the HARD drive. You can exchange it.
    I know because I have the same laptop. ;)

  • Equium - how to replace the HARD drive?

    Hello

    I need to replace the hard drive on my Toshiba Equium.
    Can someone tell me the procedure? I changed it once before, and I remember having to press one of the function keys when I turned on the laptop with the new hard drive installed.
    Should I have the recovery disk when the laptop is turned on with the new hard drive installed?

    Thank you very much

    Tim.

    Hey,.

    You should take a look in your user manual. Sometimes you will find a detailed how instruction replace the HARD disk, but it according to your laptop model.

    If you swapped the HARD drive, you need to reinstall Windows. Therefore, you can take the Toshiba Recovery disk that will restore the initial setup in a few minutes with all the drivers and tools. You only have to boot from that drive and that s all! :)

  • Replacing the HARD drive

    My laptop is model: HP G62 - 361TX NB PC all THE... My HARD drive I thnk not working not properly... I'll replace it... ghoulish u help me is this drive is Compatible with my laptop...

    Internal hard drive Hitachi 500 GB portable (Travelstar 5K 1000)

    Portable Device Type 2.5 inch spin speed disk capacity 500 GB drive HARD 5400 RPM Interface SATA 3.0 Gbps Memory Cache 8 MB average latency 5.5 ms average seek time 12 ms (read) reliability 600000 (charge/discharge Cycles)

    OR

    WD 1 TB computer internal laptop hard drive (WD10JPVT/WD10JPVX)

    DRIVE CONFIGURATION Handheld Device Type 2.5 inch HDD Drive capacity 1 TB Spin speed 5400 RPM Interface SATA 3.0 Gbps Cache Memory 8 MB transfer rate 150 MB/s data transfer rate (shared with host) 3072 MB / s Non-recoverable Read Error 1 per 10 ^ 14 reliability 600000 (charge/discharge Cycles)

    OR

    Solid State Drive Hybrid 7 mm thickness portable Seagate internal hard drive 500 GB (ST500LM000)

    DISK CONFIGURATION Handheld Device Type disk drive HARD Interface SATA 6.0 GB/s 500 GB capacity

    Please help me with this...

    One of them will work, but of the three, you want the Seagate hybrid car. It will be faster, even if more expensive.

    Here is your Service Manual:

    Manual

    Replacing the hard drive begins on page 4-8.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Can I combine DDR2 667 MHZ DDR2 800 or lower on the Satellite A200 - 1 MB?

    Hello guys I have a Toshiba Satellite A200 - 1 MB and my uncle also has a hp Pavilion dv6183eaand we are facing the same problem, the computer is delivered with 2 x 512 DDR2 667We have to increase the Ram but the Ram DDR2 667 is no longer available i

  • HP6510 e-all-in-211 stopped printing black.

    My printer has done very well.  I had beed impression for a while and then had a paper jam.  After the jam black stopped printing.  All the colors print fine, but I get a gray very very clear instead of black.  The black cartridge was practically new

  • Download Windows Defender in Vista

    Program Windows Defender has been removed from my Vista package (so the person that deleted!).  When I try to fill that empty space of Defender, told me that I don't need because it comes with Vista.  Download a copy of replacement of Windows Defende

  • Vista key in use/called/activated/work - now what?

    Hello I played with my system configuration and reformatted and reinstalled several times.  This last time when I tried to activate, I was presented with the key in the form of use.  I have studied these forums, found the command ' slui.exe 4 ', the

  • Sample Barcode Scanner does not work in the Simulator?

    Hi all I found barcode scanner sample code below link https://developer.BlackBerry.com/Cascades/sampleapps/ Is this sample will be in the Simulator works or not?