Replaced the old motherboard with new

Similar Questions

• will I have problems if I replace the OEM motherboard with a new?

  Someone at - it successfully system OEM motherboard replace?

  I'm fixing a child 6 years out of warranty HP m7160n Media Center PC with a motherboard failed.  If I replace the MB with a new one, I have software problems?  My goal is just to make a quick motherboard replacement and restore the computer to the owner with that little pain as possible.  What I don't want to do, is to have spend $90 (HP parts store wants $250) on a replacement motherboard and then have to deal with software problems then currently installed programs or the operating system.  It did not come with a Windows Media Center CD, everything is in the HP recovery partition the existing drive.

  It's my understanding that even though I am an end user, I should have no problem getting it registered/validated until I replace the motherboard with the same make and model that came in the original system.  Thanks in advance for your answers.

  A motherboard with like-for-like replacement should be no. emits either with software, drivers etc although you'll probably have to revalidate.

  Problems arise only if the new hardware is substantially different from the original, in particular with the chipset of the card. That being said however in many cases you should be able to boot and install the drivers required during the initial start-up. The only exception is the player interface as this may generate a blue screen INACCESIBLE_BOOT_DEVICE and the only way around this is to pre-install the new drivers on the old system before the change, though if the reason for this change is a dead motherboard that does not help.

  I once replaced a mobo with a failed IDE port by plugging a PCI one which enabled him to start, install the drivers for the card, install the drivers for the new Board of Directors and then replaced the Board of Directors.

  Regarding the licensing issues, it's a moot point on how you can replace before it ceases to be that a repair is disabled so the EULA. I saw someone claims that he could not get a direct replacement mobo a generic would not fit the case of mark and so it "replaces" the case as well. In other words it did take out the HARD drive and put it into a new clone system. Not permitted under this EULA.

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Change of sim card to untie the old imessage with new imessage

  I sent a few imessages someone (e, g).

  -If I disable imessage.

  -So, if I change my SIM without changing my number and change my apple ID.

  -Then I dump imessage on the use of new apple id and the new sim card, but with the same previous number.

  Now, if I send imessage on A, a will receives imessage in previous messages page or another page.

  Imessages (imessage old and new imessage) will link together or not?

  If you disconnected iMessage, jumped into a new SIM card with a different number on this subject and enabled new iMessage [ID Apple not held] with this new number, a different conversation thread would start to Messaging. They will not bind together.

• Use the old charger with new T510 T61?

  I was wondering if I should buy a new charger or if I use an old I hang out.

  My T510 came with a 65 watt charger p / n: 42 T 4422

  Old T61 charger is a watt 90 p/n 92 p 1109

  Both are 20V and vrtually identical caps.

  I would just plug to see if it works, but I don't want to fry the battery.

  your T510 may use either 65 w, 90 w or Thinkpad 135 watt charger.

• I can't software to use the old ScanJet with new Vista?

  Scanner flat Grand, the ScanJet 4200C. Used with my old HP Pavilion (running Win98SE!) for 12 years.

  Just a new Pavilion (a6200t) running Vista Home Basic and I would love to continue to use the ScanJet.

  Anyone know if/when can I get software/drivers to allow such use?

  Thanks in advance for any help.

  m lc

  You're not going to like it, but the answer is a resounding "NO".

  Drivers HP Vista - final details on the release of drivers for Vista HP

  It took some time, but HP finally released information about the drivers for Windows Vista. In summary, if your product is 'old' and a scanner (Scanjet), you can expect the following response:

  "We are sorry to inform you that there is no support for Windows Vista available for your HP product. Therefore, your product will not work with Windows Vista. The majority of HP products, not supported in Windows Vista are beyond seven years. If you use the Windows Vista operating system on your computer, please consider upgrading to a new HP product that is supported on Windows Vista. »

  Among the products affected by political driver Vista HP include popular ScanJet 3200c ScanJet 3300 and ScanJet 4200 c. HP has promised to release drivers for certain products. However, unless the product is - ish or has been designed with Vista in mind, the number of available functions is likey to be reduced.

  Source: http://www.softwarepatch.com/windows-vista-drivers/hp-windows-vista-drivers.html

  That said, you could spend hours searching the NET for 3rd party auto-run or drivers who could mimic what you need.

• Replacing the current site with new site Made in Adobe Muse, after download from FTP can not do work?

  I tried this again and again. I have the FTP and password... I changed the liabilities to another... and is in charge of all the way to 99% and said FTP has expired. I then went through GoDaddy (host and also have FTP on there)... all this shows (Vitro export the folder with all the files of muse). I have the preview mode Local in Dreamweaver and all is great. However, set the remote server mode. See the folder under another folder and now site is completely inaccessible with nothing. Any help? Please, I beg you!

  I doubt there are many Adobe or anyone here can help with if it's GoDaddy expire. I would say try to publish the site on a Business Catalyst trial site and check that everything works.

• Replace an old file with another update

  I'm new to legacy, but I think I saw how to do this somewhere...  After importation and use of an illustrator in an animation file, I needed some items display in the file. Is there a way to import this updated file and replace the old file.

  When you replace the old file with the new only the new file keep all animations and effects applied to the previous file?

  Or this option does not even exist?

  Also does make a difference if you have imported the file as a composition vs images?

  
  Thank you.

  There are several ways to do this:

  1. Close AE, edit your .ai file without adding all the new layers and then reopen AE
  2. Select the .ai file in the project Panel, and then choose Edit Original in the menu
  3. Edit your file .ai with AE remains open, then select the file in the Panel of the program to the layer that you have changed and right-click and choose reload file
  4. Finally, do a completely new .ai file import as a model, then replace the layers in your comp by pressing the alt/option key and do drag the layer previously selected in the timeline panel.

  If you need more do let me know.  I'll try and answer the computer instead of my iPhone.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• Hi, just bought new laptop to replace the old broken one and would like to know how to install my Photoshop & Lightroom on the new laptop please?

  Hi, just bought new laptop to replace the old broken one and would like to know how to install my Photoshop & Lightroom on the new laptop please?

  Please use the link below to download your products and keep your serial number at hand with you as well to enable:

  Photoshop CS6 extended:

  Download Creative Suite 6 applications

  Lightroom 5:

  Download Photoshop Lightroom

  Please let us know if it helps.

  ~ Sarika

• Replace the carriage return or new line with a table space

  Hello

  I want to replace the carriage return or new line with space in my column of the database.

  To do this, I'm using this query:

  Select replace (replace (Comments, chr (10),' '), Chr (13),' ') OF Comments_Master

  Comments_Master is the name of the table and comments is column that contains carriage return or new line.

  But this query works as expected.

  Once I run this query and run the query again "select * FROM Comments_Master", transport return and new line still exist.

  Please let me know what is wrong with this query?

  You write that data back you? This example shows that your sql should work. I thinnk the query that you just described is the updated one below.

  create table blah (text varchar2 (100));

  insert into bla values (' it's multi)

  line of text ");"

  Select * from blah.

  Select replace (replace (text, chr (10),' '), Chr (13),' ') of bla.

  Update text bla = replace (replace (text, chr (10),' '), Chr (13),' ');

  Select * from blah.

• Replaced the bad motherboard and cannot restore from recovery disks

  I replaced a card Pegatron M2N78 - mother in a Pavilion p6130y PC and I tried to restore to the recovery disks, but he says that the restore disks will not work on this system.  Really, I care is in accordance with the operating system (Vista), I don't want to pay for what I have already.  Research I've done shows that the old motherboard was known to be defective.  During the troubleshooting process, the recovery process was started, but then is broken when the card mother crapped out and didn't not recognize SATA devices.  When trying to start, he knew and then wouldn't recognize them, usually about 75/25% respectively.  Because of this, I can't just start it on the HARD drive and update the existing drivers and update the Vista license.  I have more money to buy only 7.

  How can I get the installed operating system or perform a full recovery on this system?

  Hello:

  The recovery disks only works on exact material they were made for.

  Because you have installed a different motherboard, at microsoft a new motherboard = a new PC.

  OEM licenses are licenses that computers come with HP (and any other manufacturer).

  This means that they are good only for that specific PC and cannot be transferred to another PC or motherboard.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=38vuxXQoPQY

  Q. a PC with an operating system of Windows OEM may have its motherboard updated and keep the same license? What happens if it was replaced because it was defective?

• How to tell the script that I want to save unsaved files, but not to replace the old?

  Hello world

  I had this script

  docs var = app.documents.

  for (var i = docs.length - 1; i > = 0; i--) {}

  If (.saved docs [i] == false) {}

  docs [i] except (new File("~/Desktop/Document.indd'));

  docs [i]. Close();

  }

  else {}

  docs [i]. Close (SaveOptions.Yes);

  }

  }

  Close and save files

  But if I have two files or more, I want to save the files as Doc1, Doc2...

  the new file will never replace the old

  Can someone tell me how I can do?

  Thank you

  Respect of

  Teetan

  Hello

  The 4th line change as below:

          docs[i].save(new File("~/Desktop/Doc" + (i+1) + ".indd"));
  

  Vandy

• How can I replace the old system of comments by Disqus?

  How can I replace the old system of Business Catalyst with Disqus comments? Help, please

  The universal integration for Disqus code is just javascript.  You must register for an account on http://disqus.com/for-websites/ and set up your account first.  Once you have changed your settings, click on the link 'Install' and which will give you code javascript to add to your pages as well as a few other tips to make it work.