Replacement character

Similar Questions

• Series parity errors, and clearing the error replacement character

  I have a situation where I have to change the parity on the last byte of an outgoing message.  E problem is that when I try to play, I get a parity error and the error replacement character appears in the output.  I have a few extra bytes and a few bytes lost due to masking.  This thread stated that visa 3.4.1 there is a configuration INI directive which would disable the error replacement character.  I installed 4.4.1 and were not able to make it work properly.  I'm curious to know if anyone knows if this setting without papers is always available and how to make it work.

  Thank you.

  Thanks to Tyler of OR helped me to determine the appropriate location to use.  The entry is valid, I just used the wrong visaconf.ini file.  The correct file is located in
  (\All Users\Application Data\National Instruments\NIvisa.)  Adding the following disable replacement of the error and give the data seen by the prot series:

  [ASRL-RSRC-ALIAS]
  DisableErrorReplacement = 1

• Find/replace character tags

  Hi, I have a long document that uses a lot of bold text, but not always with the character's "BOLD" tag applied. A large part of the formatting was made "on the fly" purchase hit Ctrl-B. I would like to find all occurrences of the "BOLD" text with no character labels apply and modify them so that the bold tag is applied to all. I tried to copy each example and conclusion/change, but it doesn't seem to work. Is this possible? Any tips? Thank you, Simon

  It's not too bad.

  First, apply the tag word character. Place the cursor in the word, but do not select it. Make a special copy > character Format to put your "BOLD" tag on the Clipboard.

  Place the cursor somewhere in a string that has been implemented with the substitution of command-B. Do a find > character (NO tag) Format. A dialog box appears showing the attributes of the text.

  Set replace them from the Clipboard.

  Do a find and replace test manual to make sure it's doing what you want. Then turn it loose. He will probably find and replace all existing channels of the tag of character as well as replacements, but no harm done.

  Art

• Replacement of CSV tab

  I have replacement problem of file CLOB table.

  Col1	Col2	COL3	COL4	Col5
  one	b	c	d	e
  one			d	e
  one				e
  		c	d	e
  one

  I read each line form CLOB files to varchar2 (4000) variable, and it looks like this:

  -> = tab - chr (9)

  Col1	Col2	COL3	COL4	Col5
  a->	b->	c->	d->	e
  a->	->	->	d->	e
  a->	->	->	->	e
  ->	->	c->	d->	e
  a->	->	->	->	->

  I want to put the "X" in the columns of my varchar2 (4000), where there is no value.

  Final result should be:

  Col1	Col2	COL3	COL4	Col5
  a->	b->	c->	d->	e
  a->	X >	X >	d->	e
  a->	X >	X >	X >	e
  X >	X >	c->	d->	e
  a->	X >	X >	X >	X

  Number of columns of o in file, can be greater than 5.

  Someone knows how to do?

  Hello

  Robert_D wrote:

  OK, some I think to use the REGEXP_REPLACE function to replace the string 'any_one_character ' | Chr (9), but I don't know how to write this formula.

  If I understand the problem, you don't want to replace "character", you want to replace "no character".

  Here's a way to do it:

  REGEXP_REPLACE (REPLACE (str

  , CHR (9)

  , 'X' || CHR (9)

  )

  , '([^' || CHR (9) | ']+)X' || CHR (9)

  , '\1' || CHR (9)

  )

  If you would care to post CREATE TABLE and INSERT for some SAMPLES and the desired results statements, then I could test it.

  The problem is add an 'X' in places where there is no other character.  We cannot simply replace CHR (9) | Chr (9) with CHR (9) | 'X' || Chr (9) because, when there are several tabs in a row, it takes each of them twice.

  Here's how the above query.

  REPLACE adds an 'X' before each tab, whether it is necessary or not.  Then, REGEXP_REPLACE removes 'X' of the places where it is not necessary, i.e. when there are other characters already before the tab.

• How to replace REPLACE

  Hello

  using 11.2.0.4 EE.

  How can I replace the following text:

  "replace (replace (replace(config_item,'COLLATERAL','COLLAT'), 'AGREEMENT', 'AGREE'), 'VALUE', 'VAL').

  with a single regular expression or something simpler?

  The reason is that I need something simpler since several channels will simply replace the three currently listed.

  Thank you

  Peter

  With regard also to the current. Maybe wrong...

  Regex_replace cannot replace the multiple character with several characters!

  but can replace several character by character.

  SELECT REGEXP_REPLACE ("WARRANTY and AGREEMENT and VALUE", "WARRANTY |") AGREEMENT | THE VALUE ', 'REPLACE')

  Double;

  output:

  REPLACE and REPLACE and REPLACE

  You can try something like below. (recursive with as mentioned by Frank Sir)

  with alias1 as
  (select rownum col1 , data1,data2
  from (select 'COLLATERAL' data1, 'COLLAT' data2 from dual union all
  select 'AGREEMENT'data1, 'AGREE' from dual union all
  select 'VALUE'data1, 'VAL' from dual)) , --- get replace character
  alias2 as
  (select 'COLLATERAL and AGREEMENT and VALUE' col1 from dual),
  r(str,lvl) as -- get complete string for replacement.
  (
  select REPLACE(col1,'COLLATERAL','COLLAT') str, 1 lvl  from alias2
  UNION ALL
  SELECT REPLACE(str,alias1.data1,alias1.data2) str, lvl + 1
  from alias2,r,alias1
  where alias1.col1 = r.lvl
  )
  select str from r where lvl = (select max(lvl) from r);
  
  output :
  COLLAT and AGREE and VAL
  

  I hope that helps!

• RegExp to remove the character of object code? [JS CS4]

  I have a routine that generates a list of titles & trie, who ends up as bookmarks. Where a title contains an anchored object, the text resulting includes a glyph, a small area dotted with "OBJ" in it, which seems wrong in the final list of bookmarks. The use of string.charAt (x) for the character returns 65532.

  I suppose I could write a function that goes through the characters of the sentence and ignores any 65532, but that seems like overkill, if there is a regexp replacement string. I already run string.replace (/ \s + / g, "") to replace the non-space ctrl invisible w/space characters, but this model does not affect the character of the object. This rings a Bell with anyone?

  Thank you.

  It's the "anchored object marker" (name of InDesign) or 'Object replacement character' (Unicode name). 65532 in hexadecimal is FFFC, so in java/javascript unicode notation, it is "\uFFFC.

  myString = myString.replace(/\uFFFC/,"");
  

  You can use this to find the value of a character hexadecimal unicode:

  myString.charCodeAt(myIndex).toString(16)
  

• exponent of AutoCorrect

  Hey all, its been a long time since I've used mac and return to it after Microsoft for many years, I have a lot of questions but it is one that would allow me to save time and the other I can't understand.

  I want to use AutoCorrect to put in "Fe^{2 +}' when I type"fe2 ".

  I (finally) found the AutoCorrect option in system prefrences, but I can't understand how to add the superscrypt to the correction.

  I know that I can type and use the keys, but believe me, it's not the only one and some are much more troublesome with multiples and superscrypt layers

  Thanks in advance

  I'm happy to go digging into the system files and the registry, just point me in the right direction

  Two things that work hand in hand are the Edit menu: Emoji menu item & symbols (just a cryptic name for the character Panel) and system preferences: keyboard: text panel (replacement). In the character Panel, you can type the word Exhibitor in the search engine, and all Unicode characters that are returned are exhibitors (e.g. +, -, (,), 1... n).

  The thing with the replacement text is to use a 2 or more replace character sequence which can perform the substitution of characters with to meet your needs in explaining, without interference of regular hits. Sometimes I always use 2 ^ to represent an exhibitor at 2.

  1. In System Preferences: keyboard Panel: text tab, click the symbol and in the column replace, enter fe2 +.
  2. Tab in the column with. Type Fe.
  3. The research of Panel of character on the exponent of Word.
     1. Double-click the 2 and the + Exhibitor characters that appear in the central panel in Unicode. It will be directly inserted in the field replace it immediately after the Fe, to give the desired Fe^{2 +}.
     2. Press return to set the replacement value.
  4. In the Pages, select the Edit menu: Substitutions: menu text replacement element.

  You also have Pages: Format menu: fonts: Baseline: Exhibitor (control-command-sign) and index (control-command-sign) keyboard at your disposal of the sequences.

• (Redirected) PowerEdge 2950 - disk failure

  Buon giorno

  HO a PowerEdge 2950 cui non riesco a qa Server da collegarmi console (window sin corso accesso).

  failure of disco 3 he display tell

  STO pensando di riavviare comunque server of it

  My devo acquistare UN disco in sostituzione.

  Come posso fare.

  Grazie by it support

  Sartore franco-

  ADMIN NOTE: replace character removed according to the TOU >

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• 9333 sound broken XPS13?

  Got this xps 13 9333 I7-4650u windows 7 home of the dell store decision-making yesterday and have had problems with the sound pretty well from the start.

  At the beginning when you set up windows I don't notice any noise at all.  Some updates installed and rebooted, then noticed a few sounds but suspended when trying to play any sound of things.  Then restarted and noticed no noise of the brand new and it says no Audio output device is installed.  I checked the Device Manager and there is no audio device any listed anywhere.

  Continuous updates windows install, restarted, still nothing.  Installed the audio drivers from the dell website, rebooted, noise seemed to work properly.  Stop and went to bed.

  Today started to it and back to square one, no audio device.  I've done absolutely nothing since he was working fine last night when I stopped, to his being totally nonexistent today at boot it again.

  When I noticed first that I had no sound, I looked in the bios and can not find a single mention of its all in there.  I use the latest version of bios A04 as well.

  Now, I have no idea.  Clearly, it is possible to get sound to work very well for him, because last night for a short period, it was working fine.  It seems that nothing in the bios to turn the sound on or off, and I don't know how it can be pilots If Device Manager shows nothing at all to do with the sound.

  I spend hours night last installation windows updates, but have not yet installed office or anything else and I hesitate now to lose even more hours on something, I currently suspect to be a kind of failure, because it was a new installation of windows 7 when I first turned it on and it went by the choice of countries network etc.  I need to use this portable kerchief which took 1.5 weeks to be delivered!  I lament the coil issue thus affecting all of these laptops until when Dell finally down their ADMIN NOTE: replace character removed according to the TOU > and fix, she will probably be deported to be fixed there as well until!

  Nope, they were ignorant and incompetent and I finally got a full refund on this subject, after 3 months of tinkering.  As you can see on my plu top post, the previous person who had the laptop and tried to repair several times over 3 months as well and finally gave up and returned to exactly the same problem, if dell has just sold it to me the question always here wasted my time over 3 months.

  I finally got a Surface Pro 3 and had no problem with it at all.  I won't touch again Dell and MS material has always been good, right now, I'd go with a book of surface or a surface 4 pro if I was still looking.

• Inpiron 15R 5537 - bad game performance or prolonged inability to sleep/wake?

  This post is a complaint and a call for a solution that is a real tool for troubleshooting.

  The problem is: after I've updated my notebook to Windows 8.1, I noticed on the screen would not back off from his sleep. I instantly would google for answers and I found out, it could get fixed if I installed the latest drivers HD from Intel and AMD. All together and made, the problem was finally fixed, and everything seems to work perfectly... Until I installed Left 4 Dead 2 and tried to test: the video performance was incredibly ADMIN NOTE: replace character removed according to the TOU >. I was like ' Jesus, this is only of L4D2 and this graphics card can't handle even the menu scren! So I google'd, because a HD 8850 M, which does not have a game as old as that is not normal. Has been my solution: install generic drivers from AMD. And the problem was over. Not only that, I was able to play the same field 4. But then I've locked the computer and has failed to wake it back up... again...

  Long story short: I'm mad on this subject and I really wan't to know: why the ADMIN NOTE: replace character removed according to the TOU > you guys put HD Graphics of Intel and AMD HD Board altogether? If I have a NOTE from the ADMIN: replace character removed by TOU > 8850 M why the hell I'm going to need a NOTE from the ADMIN: replace character removed according to the TOU > Intel HD Graphics? If you guys had this brilliant idea, why aren't you able to develop a decent driver, one that allows the 8850M high performance, it can handle and the HD from Intel to manage anything, should it manage? and finally: is there is a solution to both problems, which is?

  
  Thanks in advance for any help that is actually useful.

  A dissatisfied customer.

  Guys got the solution

  I did it on my Inspiron 15R 5537 with AMD 8850 M over Windows 8.1

  1. update the version of the Bios A08 link: http://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=6D4JN&fileId=3381798009&osCode=WB64A&productCode=inspiron-15r-5537&languageCode=EN&categoryId=BI

  2 uninstall display drivers using Uninstaller to display in safe MODE driver

  3. install the link worm 10.18.10.3308 Dell Intel graphic driver: http://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=Y3FHH&fileId=3321814127&osCode=WB64A&productCode=inspiron-15r-5537&languageCode=EN&categoryId=VI

  and restart

  4. install the latest AMD Catalyst Mobility 14.4 for AMD support site link: http://support.amd.com/en-us/download/mobile?os=Windows%208.1%20-%2064#amd-catalyst-packages

  and restart

  5. open CMD as administrator, and then type "powercfg - restoredefaultschemes.

  6. download and open AMDEnduroFix_DX9 and click on apply the hotfix and restart the link: https://docs.google.com/file/d/0BwMfCsXwjEEeeEZKWFVpMzM2b28/edit

  7.enjoy.

  without sleep/hibernation problems and performance of game are very good.

  The name in Device Manager is AMD R9 M265X but ignore it. Do not worry

• Dell Latitude 10 + 8.1 Windows = display problems?

  Hi all

  I have a Dell Latitude 10 ST2 with processor Atom Z2760, official update 8.1 public today and is Intel Display driver no longer has recovered the kind of questions of standby with Intel drivers 9.14.3.1160 who came through via Windows update and are dated from the 16/06/2013!

  Intel and Dell have no other update even though we are all updated 8.1 today and I tried to use stock Microsoft ones ( replace character removed according to the TOU >) and can't get anything to work right - help?

  Hi again, there is some good news, it seems. My tablet today received a new update of the graphics driver through Windows Update. This is the version 1176 (8 November) and it seems that the issue of awakening has disappeared. It remains to be seen if it is stable in all directions. See you soon!

  Acer Iconia W510

• Alienware M15x does not detect the graphics card, GeForce GT 555 M

  Hey guys, I ask you bear with me for the whole story because I believe that it may be relevant.

  I just bought this laptop (M15x) pre owned, it came with windows installed 8.1 and a load of games and others with all the drivers work and tact. Although it has been slow and some errors like may be able to control the volume.

  CPUID other programs showed my 1024 MB graphics card but I don't remember the name but I'll what nvidia says on their site and the description says...

  I didn't like windows 8 and I thought, rather than make clean for a week I'll install windows 7 from scratch, I did. Windows 7 ultimate 64-bit for info

  After doing this, I started to install anti virus and others and then to install the drivers, many of which I don't know, but analysis system dell raised all of the recommendations I installed, everything outside the video... none seems to fit my current card. I left it... went to nvidia which part of the site told me that he could not find compatible hardware... another part of the site classified as GT 555 M, but I had to go to my manufacturer to get the driver.

  After a few discussions with local technicians and these and other forums, I tried the drivers provided dell card among other NVIDIA covering my amog others but none worked and could not find compatible hardware...

  I thought it was that I installed the drivers in the wrong order, after an accident, I installed windows 7 over again and went straight on the chipset driver, then the video driver. but I fell on the same subject.

  After looking over several forums, the only thing I can come up with is to turn off graphics integrated into the bios (option not available for this)

  Maybe windows 7 doesn't like this graphics card? I am at a loss. given that everything worked fine on windows 8.1

  also in the device manager it does not list my card on the pc there is nothing wouldn't prove that I have a graphics card to all even the windows own evaluation system set to 1 for graphics NOTE from the ADMIN: replace character removed according to the TOU >

  Please help me...

  The GT 555 M has been never delivered with the M15X, but with M14X R1, so the former owner must have updated the GT 240 M graphics card. This explains why the drivers from the website corresponds to your configuration.

  Try this version of the driver from the NVIDIA website and let me know how it goes.

• It is possible with grep identify duplicates when some have a number?

  In a list with the number of entries there are duplicates with a number:

  Luisa Bright

  Bonnard Mary [1]

  Bonnard-Mary

  Pamela Wilkie

  I need tag (colors, styles, whatever it is) entries without number.

  Bonnard Mary [1]

  Bonnard-Mary

  Thank you.

  Camilo,

  Using Multi-Find/Change, I treat the question with 4 regex:

  1.

  Search: (. +) (\[\d+\]\r)(\1+)

  Replace: $1$2@$3

  2.

  Search: (. +) (\r)(\1\[\d+\]+)

  Replace: @$ 0

  3.

  Search for: ^ @. +

  Replace: Character style xxxx

  4.

  Search for: ^ @.

  Replace: no

  I put 4 regex in a MFC set. One click!

• Continuing a script error.

  This has been a problem very frustrating to resolve. We create technical documentation for industrial equipment. With each machine, we ship a physics textbook and a CD with a PDF inveractive.

  For physics textbook, you must remove interactive formatting color so the printed version seems correct; for example, Blacks are truly black and a dark blue black pixelated version.

  I was looking for a script to find and replace character styles so that I didn't have to do in manually, document-by-document.

  Vandy88 gave me this nifty script that works like a charm:

  myBookFile = File.openDialog ("Select the BOOK file", "INDB: * .indb", false);

  var myDoc = [];

  If (myBookFile! = null) {}

  App.Open (line (myBookFile.FullName.ToString ()));

  myBook = app.activeBook var

  for (var n = 0; n < myBook.bookContents.length; n ++)

  {

  myDoc [n] = app.open (File (myBook.bookContents [n].fullName.toString (()));

  -cross referece style 1

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.appliedCharacterStyle = "crossreference1";

  app.changeGrepPreferences.appliedCharacterStyle = "BoldUnderline";

  app.activeDocument.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  -cross referece style 2

  app.findGrepPreferences = app.changeGrepPreferences = null;

  app.findGrepPreferences.appliedCharacterStyle = "crossreference2";

  app.changeGrepPreferences.appliedCharacterStyle = "BoldUnderline";

  app.activeDocument.changeGrep ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  }

  }

  else {}

  Alert ("Please select the book file successfully!");

  }

  Now, here's my problem: our books contain not only the chapter files, but also coverage; Table of contents, parts lists, diagrams and Index. These documents have not all the same character styles in use, as some of them, such as the cover, table of contents, list of parts and diagrams, have no cross references. As nice as this script is, as soon as he enounters a file which is not the style of character, that he needs, he stops.

  What I need is a reason to catch this error, tell it to ignore the document and move onto the next.

  I have expermented with Try/Catch, but without success. Can not know what code to put plugs to continue or recycle. Even tried: Catch (e) {n = n + 1} without result.

  I was wondering if there is some code to Catch I have firgured out, or if I need to make some kind of an if/else statement that ensures that the first character exists in the document, then, if not, tells the script to ignore this document and move on the other. Otherwise, I'll have to create a personalized book with only the documents that I know have styles. Not a chore difficult, but it would be better if I could have a block of code that would deal with the original book.

  Thanks a lot to Vandy88 for the original code and I would be very grateful to anyone who can help me understand this problem.

  var myChangeStyle = app.activeDocument.applyCharacterStyle(characterStyles[0]);

  should be

  var myChangeStyle = app.activeDocument.characterStyles [0];

• Confusion about Non-AL32UTF8 and INTERNAL_USE

  Hello;
  
  Yesterday, I made a post in another forum with an example that included "INTERNAL_USE".
  
  Asked very politely by two different Oracle ACE to remove what I did as soon as I saw the request.
  
  I got my idea of this Oracle note:
  
  RCU fails with the character no-AL32UTF8 [ID 1063712.1]
  
  My questions:
  
  1 seeing. me this in a note and have Oracle Support direct me to use it are two different things correct? If yes maybe that 1063712.1 has a warning?
  
  2. is the message never use "INTERNAL_USE" with ALTER DATABASE?
  
  3. is CSALTER the only way to change (migration character set) must take place?
  
  Thanks to everyone for their time.
  
  mseberg

  The problem with INTERNAL_USE is that it is, essentially, made a direct update of the data dictionary without checking if this will cause any corruption of data in the database (which was, at the time of Oracle 7, the way which you did conversion of character sets and there are probably still on some Metalink note somewhere). As such, it is very easy to screw up something.

  Note in particular that you are referencing seems to assume that you have just installed an empty database that you want to use as repository WebCenter. In this very narrow circumstances, it probably does not hurt anything to change the character that is defined in this way (if I wouldn't really consider doing this way, I got a lot rather just re-create the database at that time there) because there is no data in the database. It's awfully dangerous outside this very narrow circumstance.

  On the other hand, if you have an existing database with the data, change the character set in this way is very likely going to corrupt at least some of your data. For example, imagine that you have a Windows-1252 database that stores the character 'a' in a particular line in other tables. In the Windows-1252 character set, which is represented in hexadecimal as 0xE1 (decimal 225). If you change the character set using INTERNAL_USE, Oracle tries to change the way this character is represented, it will start to treat as UTF-8. However, 0xE1 isn't a valid way to represent any character in UTF - 8 (you need two bytes to store this character). So when Oracle reads the data in this table, it will be impossible to convert binary data in any valid character, so (according to the client character set), it will substitute a replacement character (usually an exclamation mark or question mark in reverse). It's really insidious corruption because your basic ASCII data will be fine (since the first 127 characters have the same binary representation in this example), then you will have a bunch of data that are distorted that you might not recognize it immediately but your test data are often basic English. Of course, according to the source and target character sets and their different binary representations, you can also get the corruption where a character seems to have converted to another and other types of corruption.

  If you change the character set correctly by using the character set of scanning and the CSALTER script, on the other hand, Oracle takes various measures to warn you if there will be data loss or to prevent loss of data.

  Justin