replacement of motherboard on the 2005 media center a1330n computer

Someone gave me this computer recently because the motherboard was bad.  I was able to find an another mb just like it and installed yesterday and left everything else as it was in the computer.  Now, when I turn it on it has a blue screen that says HP invent and inside the F1 = Setup F10 = restore etc.

When I hit F1 it says that the installer from and then he just sits there and does nothing more.  I have no CD with it.  What should I do at this point?

Any suggestion is appreciated.

Hello

Try the power supply troubleshooting first. (Processors really don't die often in PC OEMS)

At the back of the PSU (power supply unit) that you see on the led when you plug in power?

It is a solid color or is it flashes or do nothing?

If it is flashing or doing nothing... The procedure to reset the power supply listed below.

(1) unplug the power cord from the PC

(2) move the switch to the position that it is in the opposite position (115 v 60 hz to 220v 50 Hz or vice versa depending on where you live).

(3) move the switch to its original position (voltage of household in your locale)

(4) plug the power cord to the power supply.

If the method worked reset of the PSU, you should have a color United, headed to the back of your diet. Normally, this indicates that it works, but it is not a guarantee that it is.  Now, turn on your PC.

I'll wait until you declare your answers and your results here.

Kind regards

ERICO

Tags: HP Desktops

Similar Questions

  • Replacement of motherboard on PC HP Media Center under Windows Vista Home Premium (32 bit)

    On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

    Thanks for you help!

    HC

    OEM license is linked to the original version of the motherboard, it is M2N68 - LA. You lose OEM 'rights' when you have changed the Council.

  • Pavilion a1250n: what is the executable media center

    I have a pc media center in Windows XP.  A rogue program wiped out my Start menu, and I can't find the executable file for the HP media center program which I preferred for Windows Media Player.  Anyone know the name and location of the executable?

    America, welcome to the forum.

    Here are some instructions that can help you find the file you need:

    1. go to START.

    2. click on SEARCH.

    3. click on 'files and folders...'.

    4. from "what you want to search for?" list on the left, click "all files and folders."

    5 type file names in the search box, and select "local hard drives" (normally, it's the disk C :).

    6. click on "Search".

    I type in Media Center to see if that helps.  I have not used XP for years.  So, I'll memory that it is correct.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Cannot access the Oblivion cheat console, but I stopped the windows media center Receiver service.

    Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I should try next. ?

    Hi daking9002,

    To bring up the cheat console into oblivion, you will need to unplug the sensor remotely from the PC. Once it has been disconnected, the oblivion cheat console will come just as it would on any other PC.

    I also tried equipping my number 1 access key. It works very well now, I just press 1 and the console opens. To close simply press ESC twice and press 1 once the UN-equip the ring.

    You can also download: " http://www.tesnexus.com/downloads/file.php?id=13133 ."

    -It gives you an inventory item: "Ring of Console" problem solved. -

    QUESTMSG

  • I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

    I received an email with an attachment that I downloaded, when I go to open the windows media center file opens but I can't find file what I do

    I was able to open using AbiWord, thanks for the reply

  • On occasion, I sign in the windows media center, I receive one doesn't sstart message for picassoaddin. What is it?

    What is picassoaddin - opportunity, that I sign in the windows media center, I receive one doesn't sstart message for picassoaddin?

    It turns out that the problem could be due to some pre-installed software. The Picasso snap steals the focus from Media Center at the session of the Extender is launched and so instead of the remote control Media Center, he tries to control Picasso (which is not visible). So by pressing the green button should bring Media Center at the forefront and work around the problem.

    A more permanent solution is to remove the Picasso-> General-> program library Options-> edit program library and uncheck Picasso and the snap-snap front. Then restart the session of the Extender.

  • Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

    Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

    I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

    Could someone please help me with this?  Thank you in advance.

    Hey kansascitykid,

    If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

    ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

    ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

    ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

    • Center cannot send a signal to the set-top box to change a channel.

    More information here: problems with watching TV on your computer

     

    Also have a look if you find useful suggestions in this thread.

     

    Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

    It's VERY odd and very annoying!

    I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

    So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

    However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

    He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

    I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

    She continues to keep trying to connect then repeatedly fails.

    If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

    I can't really understand what is happening here... any help would be appreciated.

    Hello

    Refer the article that could help you solve this problem.
    http://support.Microsoft.com/kb/932163

  • Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions.

    Hello

    I installed Windows 7 this weekend with the offer of the student. Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions. Is it possible that I can download a fix or download the WMC for Windows 7?

    My computer (laptop) is a gateway T-6836 64-bit.

    original title: WIndows 7 media center has stopped working

    I upgraded to Win7 upgrade thestudent and my WMC keeps stopping whenever I try to open it. Is there a way to fix this or if I do a clean install of the operating system?

    This is the error I get:

    Description
    Stopped working
    Path of the Application of vulnerabilities: C:\Windows\ehome\ehshell.exe

    Signature of the problem
    Problem event name: CLR20r3
    Signature of the problem 01: ehshell.exe
    Signature of the problem 02: 6.1.7600.16385
    Signature of the problem 03: 4a5bd053
    Signature of the problem 04: mcstore
    Signature of the problem 05: 6.1.0.0
    Signature of the 06 problem: 4a5bda1e
    Signature problem 07: 1 a 1
    Signature of the 08:146 problem
    Signature of the problem 09: System.InvalidOperationException
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033

    Additional information about the problem
    Bucket ID: 655435415

    When you see failing requests like this, even if you get it to work, you never know what's going to arise later.  I suggest to use the feature of easy to backup transfer all your data and do a clean install.

  • How to get rid of the Windows Media Center Nag screen?

    I do not expect to use Windows Media center. Well, I don't really understand what it is, honestly. But I get the screen of horse to 'watching TV' on my computer. It's the last thing I want to do with my computer.

    How can I get rid of the nag screen that keeps popping up?

    Thank you very much

    Jack

    Hello

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Rebuild the Media Centre.

    Your index requires virtually no maintenance. However, if the index looking for files that you know problems must be in a location indexed; You may have to re-create the index. This can take a long time to complete, so avoid this step unless you have given the index enough time (several hours) to correct the problems first. To rebuild the index:

    1. open indexing and search by clicking the Start button Options, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.

    2. click on Advanced Options, click the index settings tab and then click on rebuild.

    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Method 2:

    Enable and disable the Media Center to enable Windows features turn on or off.

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

    a. open them turn Windows features on or OFF.

    b. Locate and expand multimedia features.

    c. clear the check box for Windows media Center to turn off. (Check the Windows media Center to turn on)

    Note: Restart the computer after you enable and disable the media Center.

  • Whenever I go to open a file PDL the windows media center opens.

    Whenever I go to open a file PDL the windows media center opens.  I downloaded 9 remains, but I can't always open the PDL files.  Windows Media Center keeps opening.  What is the way?  Can I disable the Media center?  Help!

    Whenever I go to open a file PDL the windows media center opens.  I downloaded 9 remains, but I can't always open the PDL files.  Windows Media Center keeps opening.  What is the way?  Can I disable the Media center?  Help!

    You mean PDF not PDL. (I presume).
    Save a PDF to your HARD drive, make a click right, choose 'Open with', choose "choose default program", choose Acrobat, and then at the bottom of the dialog box, click "always use the selected program to open...". "and then click OK.
    See if that helps... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • The window Media Center continues to appear

    Separated from this thread.

    The window Media Center continues to appear

    Hi Lydia,.

    Please try the steps below and let know us the status

    1. click on Start, click default programs, and click set default settings the access and the computer program.

    2. click customand scroll down to choose a default media player.

    3. uncheck the enable access to this program next to Windows Media Center.

    4. click OKand close all the windows that we have opened.

    5. you can avoid the Media Center to be launched or view others.

    6. to cancel this change simply tick the field that you previously disabled

  • get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

    Original title: Windows Media Center

    Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

    And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

    Try this for me:

    Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

    If this does not work, try this:

    1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

    2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

    3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

    4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

    5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

    6. RESTART. It will not work until you restart your computer.

    7. Open Windows Media Center and see if the problem is resolved.

  • How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?

    How can I reinstall the Windows Media Center Gadget on my PC with Windows 7, 64-bit?  I had left it one day and now I don't know where he is. I went into the control panel and tried to 'Restore the Gadget', but he said it was not something to restore. I don't know how to get the file from one account to another, if that's what I'm supposed to do. I just want to know how to get the original back that came when I downloaded Media Center for the first time (that I tried to do it again. "But it did not help at all).

    Thank you.

    It's actually pretty easy if you are in the control panel for programs

    Control Panel - programs-

    There is an element under the gadgets 'restore the desktop gadgets installed with windows' which includes Media Center gadget

  • Whenever I use my computer, the Windows Media Center screen opens constantly throughout any program, how can I stop this?

    Whenever I use my computer, the Windows Media Center screen opens constantly throughout any program, how can I stop this? I have istsalled game AllShare on my mobile device and the computer. It seems that I started having these problems at the same time, I installed it, but I could be wrong, because I was working on several things. Help, please!

    you say that when you open any program, Media Center opens instead OR are
    you say you can open programs, but Media Center appears in these
    programs. These are two different issues.  Have you tried a system restore to a
    point before your installed this program "Allshare" to see if the problem stops?
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     

Maybe you are looking for